Snapper P216012TV, FRP216012TV, EFRP216012TV, EFRP216512TV, EFRP216516TV User Manual

0 (0)

Safety Instructions & Operator’s Manual for

21” STEEL DECK WALK MOWERS SERIES 12 & 16

MODELS

PROPELLED MODELS

P216012TV

FRP216012TV

EFRP216012TV

EFRP216512TV

EFRP216516TV

MODEL NUMBER EXPLANATION

 

 

 

 

R

P

21

50

12

T

V

 

 

 

 

MODEL DESIGNATION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENGINE OPTIONS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SELF-PROPELLED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENGINE TYPE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CUTTING WIDTH

 

 

 

 

 

 

 

 

 

 

 

 

 

SERIES DESIGNATION

 

 

 

 

 

 

 

 

 

 

 

 

 

ENGINE HORSE POWER

 

R – Recycling Model

F – Flange Type Deck

 

12 – Series Designation

 

P – Self Propelled Model

N – California Model

 

T – Tecumseh Engine

 

E – European Model

21 – 21” Cutting Width

 

V – Over Head Valve Engine

 

60 – 6.0 HP (Engine Horse Power)

 

 

 

65 – 6.5 HP (Engine Horse Power)

 

 

Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 & 3. Remember that all power equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance with the operating instructions and common sense.

COPYRIGHT © 1999

SNAPPER INC.

ALL RIGHTS RESERVED

MANUAL No. 3-5842 (REV. 2, 8/10/99)

IMPORTANT SAFETY INSTRUCTIONS

WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind and body and must not be under the influence of any substance, which might impair vision, dexterity or judgment. If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: (1-800-935-2967).

PROTECTION FOR CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

1.KEEP children out of the mowing area and under the watchful care of a responsible adult.

2.DO NOT allow children in yard when machine is operated and turn machine OFF if anyone enters the area.

3.DO NOT allow pre-teenage children to operate machine.

4.ALLOW only responsible adults & teenagers with mature judgment under close adult supervision to operate machine.

5.DO NOT pull mower backwards unless absolutely necessary. LOOK BEHIND and down for small children before and when backing.

6.USE EXTRA CARE when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

SLOPE OPERATION

1.Slopes are a major factor related to slip and fall accidents, which can result in severe injury. All slopes require extra caution. If you feel uneasy on a slope, do not mow it.

2.Mow across slopes, never up-and-down. Exercise extreme CAUTION when changing directions on slopes. DO NOT mow steep slopes or other areas where stability or traction is in doubt.

PREPARATION

1.Read, understand, and follow instructions and warnings in this manual and on the mower and with attachments. Know the controls and the proper use of the mower before starting.

2.Only mature, responsible persons shall operate the machine and only after proper instruction.

3.Data indicates that operators age 60 and above, are involved in a large percentage of mowerrelated injuries. These operators should evaluate their ability to operate the mower safely enough to protect themselves and others from serious injury.

PREPARATION

4.Handle fuel with extra care. Fuels are flammable and vapors are explosive. Use only an approved fuel container. Never remove fuel cap or add fuel with engine running. Add fuel outdoors only with engine stopped and cool. Clean spilled fuel and oil from machine. DO NOT smoke. DO NOT run engine indoors.

5.Check the area to be mowed and remove all objects such as toys, wire, rocks, limbs and other objects that could cause injury if thrown by blade or interfere with mowing. Also note the location of holes, stumps, and other possible hazards.

6.Keep people and pets a safe distance from machine.

7.Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location.

8.Make sure all safety decals are clearly legible. Replace if damaged.

9.Protect yourself when mowing and wear safety glasses, long pants and substantial footwear. DO NOT mow barefooted or with sandals.

10.Know how to STOP blade and engine quickly in preparation for emergencies.

11.Use extra care when loading or unloading the machine into a trailer or truck.

OPERATION

1.DO NOT put hands or feet near or under rotating parts. Keep clear of discharge area while engine is running.

2.STOP engine when crossing gravel drives, walks, or roads, and under any conditions where thrown objects might be a hazard.

3.Mow only in daylight or good artificial light.

4.DO NOT operate mower while under the influence of alcohol or drugs.

5.After striking a foreign object or if mower vibrates abnormally, STOP the engine, disconnect and secure spark plug wire. Inspect the mower for any damage and repair the damage.

2

IMPORTANT SAFETY INSTRUCTIONS

OPERATION

6.Watch for holes, ruts or bumps. Tall grass can hide obstacles.

7.DO NOT mow near drop offs, ditches or embankments. Operator could lose footing or balance.

8.DO NOT mow on wet grass Always be sure of your footing; keep a firm hold on the handle and walk; never run. Slipping could cause injury. STOP blade and engine whenever you leave the operating position behind the handle for any reason, including clearing grass, emptying grass bag and making wheel height adjustments, repairs, or inspections.

9.Before cleaning, repairing or inspecting make certain blade and all moving parts have STOPPED. Disconnect and secure spark plug wire away from plug to prevent accidental starting.

10.STOP engine and wait until the blade comes to complete STOP before removing grass bag and/or clearing grass.

MAINTENANCE AND STORAGE

1.Never store machine or fuel container inside where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of reach of children in a well ventilated, unoccupied building.

2.Keep mower and engine free of grass, leaves or excess grease to reduce fire hazard and engine overheating.

3.When draining fuel tank, drain fuel into an approved container outdoors and away from open flame.

MAINTENANCE AND STORAGE

4.Keep all bolts, especially blade bolts, nuts and screws properly tight. Check that all cotter pins are in proper position.

5.Service engine and make adjustments only when engine is stopped. Removed spark plug wire from spark plug and secure wire away from spark plug to prevent accidental starting.

6.DO NOT change engine governor speed settings or overspeed engine.

7.Check grass bag assembly frequently for wear or deterioration to avoid thrown objects and exposure to moving parts. Replace with new bag if loose seams or tears are evident. Replace slider or bag adapter if broken or cracked.

8.Mower blades are sharp and can cut. Wrap the blades or wear heavy leather gloves and use CAUTION when handling them.

9.NEVER test for spark by grounding spark plug next to spark plug hole; spark plug could ignite gas exiting engine.

10.Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices.

11.Use only genuine SNAPPER replacement parts to assure that original standards are maintained.

3

TABLE OF CONTENTS

 

IMPORTANT SAFETY INSTRUCTIONS.............................................

2 & 3

TABLE OF CONTENTS ............................................................................

4

SECTION 1 - FAMILIARIZATION..............................................................

5

SECTION 2 - OPERATING INSTRUCTIONS.........................................

6-8

Pre-start Checklist ...............................................................................................

6

Starting & Stopping Engine & Blades.............................................................

6-7

Starting & Stopping Wheel Drive .......................................................................

7

Adjusting Handle Height .....................................................................................

7

Adjusting Cutting Height....................................................................................

.7

Recycling Operation ............................................................................................

8

Baffle Adjustment ................................................................................................

8

Grass Catcher Installation ..................................................................................

8

SECTION 3 - MAINTENANCE INSTRUCTIONS..................................

9-10

Changing Engine Oil............................................................................................

9

Checking Transmission Grease ....................................................................

9-10

Checking Mower Blade .....................................................................................

10

Checking Engine Drive Belt ..............................................................................

10

Checking Transmission Poly-V Belt ................................................................

10

Annually (End of Each Season) ........................................................................

10

Engine..............................................................................................................

10

Air Filter ...........................................................................................................

10

Engine Oil ........................................................................................................

10

Storage Procedure.............................................................................................

10

SECTION 4 - ADJUSTMENTS AND REPAIR ....................................

11-16

Mower Blade Repair/Replacement (Standard & Ninja)...................................

11

Wheel Drive Control Adjustment......................................................................

12

Driven and Drive Disc Service ..........................................................................

12

Cleaning Drive Disc and Driven Disc............................................................

13

Drive Spring Repair/Replacement.................................................................

13

Driven Disc Adjustment .................................................................................

13

Driven Disc Replacement...............................................................................

14

Driven Disc Bearing Replacement ................................................................

15

Hex Shaft Bearing Replacement ...................................................................

15

Belt Service ........................................................................................................

15

Engine Drive Belt Replacement ...............................................................

15-16

Transmission Poly-V Belt Replacement .......................................................

16

TROUBLESHOOTING ............................................................................

17

SERVICE SCHEDULE ............................................................................

18

WARRANTY ............................................................................................

19

PRIMARY MAINTENANCE ................................................................

20-23

4

Snapper P216012TV, FRP216012TV, EFRP216012TV, EFRP216512TV, EFRP216516TV User Manual

Section 1 - FAMILIARIZATION

WHEEL DRIVE

CONTROL

BLADE CONTROL

GROUND SPEED

CONTROL

ENGINE

SPEED

CONTROL

UPPER

HANDLE

KNOB

MID

HANDLE

GRASS BAG

KNOB

LOWER HANDLE

REAR HEIGHT

ADJUSTMENT

LATCH

ENGINE AIR

BREATHER COVER

RECYCLING

DECK COVER

GROUND SPEED

ENGINE

 

SPEED

ENGINE SPEED DECAL

CONTROL

CONTROL

 

 

 

FAST

FAST

 

 

 

SLOW

 

 

 

SLOW

BLADE CONTROL -

WHEEL DRIVE

RELEASE TO STOP

CONTROL - RELEASE

BLADE & ENGINE

TO STOP FORWARD

 

RECYCLING MODEL SHOWN

MOTION

ROPE START

 

(ROPE START MOUNTED ON

 

HANDLE

RIGHT SIDE OF HANDLE)

 

GRASS BAG

 

CONNECTOR

 

 

OIL FILL CAP &

PRIMER

 

DIPSTICK

BULB

FUEL

FILLER CAP

MOWER

DECK

FRONT HEIGHT

ADJUSTMENT

LATCH

CATCHER MODEL SHOWN (ROPE START MOUNTED ON LEFT SIDE OF HANDLE)

BAG ADAPTER

RECYCLING DECK DETAIL

FIGURE 1.1

SIDE DISCHARGE DETAIL

1.1 INTRODUCTION

This manual has been prepared for the operators of the SNAPPER WALK BEHIND MOWERS. Its purpose, aside from recommending operating and routine service requirements, is to promote safety through the use of accepted operating practices.

Read, Understand and Follow the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 & 3 of this manual and all safety messages on the mower and attachments before operating the mower.

1.2 NOMENCLATURE

The nomenclature drawing above, Figure 1.1, shows the essential parts of the SNAPPER WALK BEHIND MOWERS. It is recommended that all operators of the mower become thoroughly familiar with the controls, parts and operation of the mower before operating. Specific details involving the engine are found in the separate engine owner’s manual. Study these manuals before operating and keep both handy for future reference.

5

Section 2 - OPERATING INSTRUCTIONS

2.1PRE-START CHECK LIST

Make the following checks and perform the service required before each start-up.

2.1.1.Check guards, deflectors, grass bag, adapter and covers to make sure all are in place and securely tightened.

2.1.2.Check blade control and wheel drive control to insure they work freely. See Figure 2.1.

RECYCLING MODEL SHOWN (ROPE START MOUNTED ON RIGHT SIDE OF HANDLE)

BLADE

WHEEL DRIVE

CONTROL

CONTROL

FIGURE 2.1

2.1.3.Check cutting height. Adjust to desired height.

2.1.4.Check engine oil and add oil as needed to bring level up to the full mark. Refer to Engine Owner’s Manual for oil specifications. See Figure 2.2.

2.1.6. Clean exterior surfaces of cutting deck and engine of any accumulation of spilled fuel, dirt, grass, oil, etc. Keep engine air intake screen and cooling fins clear at all times.

2.2STARTING & OPERATION 2.2.1. ENGINE & BLADE

1. Move engine speed control to the “Fast” (Rabbit) position. See Figure 2.3.

NOTE: Stop the engine (and blade) by releasing the blade control.

CATCHER MODEL SHOWN (ROPE START MOUNTED ON LEFT SIDE OF HANDLE)

BLADE

CONTROL

WHEEL

DRIVE

CONTROL

ENGINE SPEED CONTROL (SHOWN IN CHOKE POSITION)

FIGURE 2.3

2.Push primer button three times to start a cold engine. NOTE: Do not use primer button to start warm engine.

3.Pull blade control against handle.

4.Pull rope start handle to crank engine.

5.After engine starts, allow a brief warm-up until engine runs smooth.

FIGURE 2.2

2.1.5. Add fuel to tank after pushing the mower outside where fumes can safely dissipate. Make sure cap is tightened after refueling. Refer to Engine Owners Manual for specifications.

6

Section 2 - OPERATING INSTRUCTIONS

2.2.2.PROPELLING MOWER

(Self Propelled Models Only)

1.Move ground speed control to the desired speed position. See Figure 2.4.

2.Move wheel drive control against handle to engage wheel drive and propel mower forward. Forward speed can be adjusted while the mower is moving by changing position of the ground speed control. See Figure 2.4.

MOVE GROUND

RECYCLING MODEL SHOWN

(ROPE START MOUNTED ON

SPEED CONTROL TO

RIGHT SIDE OF HANDLE)

DESIRED POSITION

 

(FAST)

SIXTH SPEED POSITION

SIX

(SLOW) ONE ONE SPEED

POSITION WHEEL DRIVE CONTROL

BLADE

CONTROL

FIGURE 2.4

2.3STOPPING

Stop engine and blade by releasing the blade control. Stop forward motion of mower by releasing the wheel drive control.

2.4HANDLE HEIGHT ADJUSTMENT

The height of the mower handle can be adjusted as follows:

1. Loosen the lower nuts on each lower handle as

shown in Figure 2.5.

HIGHER

LOWER

HANDLE

LOWER

LOOSEN LOWER

NUTS ON EACH

LOWER HANDLE

2.Move upper mower handle up or down until the desired position is achieved.

3.Tighten the lower nuts on each lower handle to maintain desired position.

WARNING

Stop engine and mower blade by releasing the blade control before adjusting cutting height and handles.

2.5CUTTING HEIGHT ADJUSTMENT

1. Pull the height adjusting latch outward and move to desired cutting height. See Figure 2.6.

1

LOWEST CUTTING

LATCH

HEIGHT

 

1

2

3

4

5

 

HIGHEST

6

6

CUTTING

 

 

HEIGHT

 

FIGURE 2.6

2. Set all wheels at the same cutting height. The highest cutting position is Notch 6. The lowest cutting position is Notch 1. See Figure 2.7.

LATCH

POSITIONS

CUTTING HEIGHT SETTINGS

FIGURE 2.7

FIGURE 2.5

7

Section 2 - OPERATING INSTRUCTIONS

WARNING

Before attempting any adjustments to the cutting height or front baffle, STOP the engine, remove the spark plug wire from the spark plug and secure wire away from plug. DO NOT make any adjustments with engine or blade running. Be extremely careful when performing adjustments around engine. Engine is extremely hot and can cause severe burns. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

2.6 RECYCLING OPERATION

NOTE: For best recycling results, cut up to a maximum of 1/3 of grass blade length and recycle ONLY when grass is dry.

1.Set all wheels in the highest cutting position (Notch 6).

2.Move engine speed control to “FAST” (Rabbit) position.

3.Move ground speed control to slowest speed setting.

4.Proceed mowing slowly. If grass is very dense, lower each rear wheel latch one notch lower than the front wheel latches to improve recycling performance.

2.7ADJUSTING FRONT DECK BAFFLE

(Models with an “F” prefix in model number) (Example: FR215012)

The front of the cutting deck on these models has been modified with an open area. This allows the blade to have more direct contact with the grass and allows more air flow into deck chamber. The adjustable baffle should be secured in the lowest position when using a grass bag. The baffle should be secured in the highest position when mulching grass.

HOLE DESIGNATES TOP OF

BAFFLE (ALWAYS KEEP

HOLE IN UP POSITION)

FRONT DECK BAFFLE (SHOWN

IN HIGHEST POSITION)

WING NUT

FRONT CUTOUT OF DECK

FRONT

DECK

BAFFLE

WING

NUTS

MOVE BAFFLE UP FOR MULCHING GRASS

MOVE BAFFLE DOWN FOR GRASS BAGGING

FIGURE 2.8

2.8INSTALLATION of GRASS CATCHER

Install grass catcher by sliding connector over flange of adapter. See Figure 2.9. Attach grass bag hooks over middle handle cross bar. See Figure 2.10.

POSITION BAG

BETWEEN HANDLES

SLIDE

CONNECTOR

CONNECTOR DOWN OVER BAG

ADAPTER FLANGE

BAG

ADAPTER

NOTE: Under certain conditions, when mulching, some grass may blow out from under front of baffle. This is normal but, the amount of grass blowing out can be reduced. Lower baffle slightly to reduce the amount of grass blow out.

1.Stop engine. See WARNING above.

2.Loosen wing nuts that secure front deck baffle. See Figure 2.8.

3.Lower the adjustable baffle to the lowest position when using a grass bag. Raise the baffle to its highest position when mulching grass. Take care to keep the baffle’s lower edge parallel to the bottom of the deck. See Figure 2.8.

4.Retighten wing nuts securely.

FIGURE 2.9

MIDDLE

HANDLE CROSS

BAR

MIDDLE

HANDLE

CROSS ATTACH BAG HOOKS BAR OVER MIDDLE HANDLE

CROSS BAR

FIGURE 2.10

8

Loading...
+ 17 hidden pages