Singer cg500 User Manual

REVISIONS

REV.	DESCRIPTION	APPROVAL	DATE
	ADOPT		AUG, 2004
1	ADDED CG-500 AND CG-550		FEB,2005

SUB-ASSEMBLY

PAGES REF.	DESCRIPTION
01 - 02	ATTACHMENT SET
03 - 04	ARM, BED, THROAT PLATE & BED SLIDE
05 - 06	ARM TOP COVER
07 - 08	COVERS & ADD-ONS
09 - 15	NEEDLE BAR, PRESSER BAR, AUTOMATIC NEEDLE THREADER & THREAD TAKE-UP
16 - 17	ARM SHAFT DRIVE
18 - 19	HAND WHEEL
20 - 21	TENSION MECHANISM
22 - 23	HOOK SYSTEM
24 - 25	BIGHT AMPLITUDE
26 - 29	NEEDLE POSITION
30 - 31	DISC SELECTOR ASSEMBLY
32 - 33	CAM STACK
34 - 35	FEED REGULATOR CAM
36 - 37	BUTTONHOLER & FEED REGULATOR CAM
38 - 39	CAM CONTROLLED FEED
40 - 41	FEED SYSTEM
4243	OPTIONS
44-45	ELECTRICAL EQUIPMENT

Page 02

ATTACHMENT SET

			H	H	H	C	C
			D	D	D	G	G
			1	1	1	5	5
			0	0	1	0	5
REF.	PART NUMBER	DESCRIPTION	2	5	0	0	0
1	358393-006	ATTACHMENT SET COMPLETE				X	X
1	358386-001	ATTACHMENT SET COMPLETE	X	-	-
1	358393-001	ATTACHMENT SET COMPLETE	-	X	-
1	358393-002	ATTACHMENT SET COMPLETE			X
2	179967464	SPOOL PIN HOLDER (SMALL) - CINZA				X	X
2	179967-463	SPOOL PIN HOLDER (SMALL) - CINZA	X	X	X
3	507664-470	ARM TOP COVER SPOOL PIN THREAD LEAD-OFF LARGE (PLASTIC) CINZA				X	X
3	507664-469	ARM TOP COVER SPOOL PIN THREAD LEAD-OFF LARGE (PLASTIC) CI	X	X	X
4	172336-000BUY	BOBBIN (PLASTIC)	X	X	X	X	X
5	353364-000	NEEDLE PACK (N2020 SIZE 11/14/16 & N2045 SIZE 11/14)	-	X	X	X	X
6	313117-000BUY	FEED COVER PLATE (PLASTIC)	X	X	X	X	X
7	446492-000	SPECIAL PURPOSE PRESSER FOOT PLATE (SNAP-ON)	-	X	X	X	X
8	358286-451	ACESSORY STORAGE	X	X	X	X	X
9	161927-000	BUTTONHOLE PRESSER FOOT				X	X
9	161927-451BUY	BUTTONHOLE PRESSER FOOT	-	X	X
10	507836-000BUY	ZIPPER FOOT	-	X	X	X	X
11	356630-000BUY	BLINDSTITCH HEM PRESSER FOOT	-	X	X	X	X
12	8879-656	FELT	-	-	X
13	356942-455	SPOOL PIN	-	-	X
14	531868-000	TWIN NEEDLE	-	-	X
15	358183-000	1/4 INCH FOOT	-	-	X
16	358174-000	INVISIBLE ZIPPER FOOT	-	-	X

			Page 04
		ARM, BED, THROAT PLATE & BED SLIDE
			H	H	H	C	C
			D	D	D	G	G
			1	1	1	5	5
			0	0	1	0	5
REF.	PART NUMBER	DESCRIPTION	2	5	0	0	0
1	179926-000	THROAT PLATE CLAMP SPRING RETAINING RING	X	X	X	X	X
2	357611-000	THROAT PLATE CLAMP SPRING	X	X	X	X	X
3	353597-000	THROAT PLATE CLAMP	X	X	X	X	X
4	356713-000	THROAT PLATE FOR ZIG-ZAG SEWING	X	X	X	-	X
5	446482-000	BED SLIDE SPRING	X	X	X	-	X
6	356715-000	BED SLIDE PLATE	X	X	X	X	X
7	357020-451	ARM SHAFT (REAR) HOUSING MOUNTING SCREW	X	X	X	X	X
8	357017-002	ARM SHAFT (REAR) HOUSING ASSEMBLY	X	X	X	X	X
9	113455-006	ARM SHAFT (REAR) HOUSING MOUNTING SCREW	X	X	X	X	X
10	357019-000	ARM TOP COVER MOUNTING STUD	X	X	X	X	X
11	446375-000	THREAD TAKE-UP LEVER LINK HINGE STUD	X	X	X	X	X
12	357438-001	TENSION RELEASING LEVER HINGE PIN	X	X	X	X	X
13	353624-000	THROAT PLATE POSITION PIN (PLASTIC)	X	X	X	X	X
14	359190-900	BED CUSHION	X	X	X	X	-
15	514608-000	BED (BOTTOM) COVER & CABINET BOLT NUT	X	X	X	X	X
16	179978-470	ARM & BED GRAY	X	-	-	X	-
17	356070-465	ARM & BED GRAY	-	X	X	X	X
18	353375-451	BED (BOTTOM) COVER & CABINET BOLT WASHER	X	X	X	-	X
19	355250-451	BED (BOTTOM) COVER & CABINET BOLT	X	X	X	X	X
20	353360-452	ARM INSERT (MOTOR VENT GRILL)	X	X	X	-	X
21	357464-002	TENSION RELEASING LEVER HINGE PIN WASHER	X	X	X	X	X
22	359172-451	BED EXTENSIBLE THROAT PLATE	X	X	X	-	X

Page 6

ARM TOP COVER

			H	H	H	C	C
			D	D	D	G	G
			1	1	1	5	5
			0	0	1	0	5
REF.	PART NUMBER	DESCRIPTION	2	5	0	0	0
			-	-	-	-	-
1	358390-002	ARM TOP COVER COMPLETE	-	-	-	X
1	358391002	ARM TOP COVER COMPLETE	-	-	-	-	X
1	358389-001	ARM TOP COVER COMPLETE	X	-	-	-	-
1	358390-001	ARM TOP COVER COMPLETE	-	X	-	-	-
1	358391-001	ARM TOP COVER COMPLETE	-	-	X	-	-
2	507664-470	ARM TOP COVER SPOOL PIN THREAD LEAD-OFF	-	-	-	X	X
2	507664-469	ARM TOP COVER SPOOL PIN THREAD LEAD-OFF	X	X	X	X	X
3	357600-001	ARM TOP COVER PLUGGED HOLE RESIN	X	X	X	X	X
4	357325-900	ARM TOP COVER MACHINE HANDLE HINGE PIN	X	X	X	X	X
5	446138-000	ARM TOP COVER THREAD GUIDE SCREW WASHER	X	X	X	X	X
6	354975-451	ARM TOP COVER SCREW	X	X	X	X	X
8	356047-000	BOBBIN WINDER TENSION COMPLETE	X	X	X	X	X
9	354826-451	ARM TOP COVER MOUNTING BRACKET SCREW	X	X	X	X	X
11	531765-000	ARM TOP COVER BRACKET (LEFT)	X	X	X	X	X
12	356116-451	ARM TOP COVER THREAD GUIDE SCREW	X	X	X	X	X
13	141936-833	BOBBIN WINDER TENSION BRACKET ADJUSTING SCREW	X	X	X	X	X
14	44794-000	BOBBIN WINDER TENSION BRACKET ADJUSTING SCREW RETAINING CLI	X	X	X	X	X
15	357329-902	ARM TOP COVER MACHINE HANDLE	-	-	-	X	X
15	357329-901	ARM TOP COVER MACHINE HANDLE	X	X	X
16	357084-453	ARM TOP COVER THREAD GUIDE	-	-	-	X	X
16	357084-452	ARM TOP COVER THREAD GUIDE	X	X	X	-	-
17	356843-454	ARM TOP COVER SHROUDER	X	X	X	X	X
18	141920-455	BOBBIN WINDER STOP SCREW	X	X	X	X	X
19	445924-000	BOBBIN WINDER STOP	X	X	X	X	X
20	53640-819	BOBBIN WINDER STOP SCREW NUT	X	X	X	X	X
21	531766-000	BOBBIN WINDER SPRING	X	X	X	X	X
22	445486-000	BOBBIN WINDER RETAINING RING	X	X	X	X	X
23	531767458	BOBBIN WINDER ASSEMBLY	-	-	-	X	X
23	531767-457	BOBBIN WINDER ASSEMBLY	X	X	X	-	-
24	356913-000	BOBBIN WINDER SPINDLE COMPLETE	X	X	X	X	X
25	354633-453	ARM TOP COVER HANDLE BRACKET	X	X	X	X	X
26	531770-452	BOBBIN WINDER FRAME	X	X	X	X	X
27	15287-701	BOBBIN WINDER FRICTION RING	X	X	X	X	X

Page 08

COVERS AND ADD-ONS

			H	H	H	C	C
			D	D	D	G	G
			1	1	1	5	5
			0	0	1	0	5
REF.	PART NUMBER	DESCRIPTION	2	5	0	0	0
1	113455-001	BED (BOTTOM) COVER FASTENING SCREW	X	-	-	X	-
2	514608-000	BED (BOTTOM) COVER FASTENING NUT	X	-	-	X	-
3	357356-452	BED (BOTTOM) COVER (PLASTIC)	X	-	-	X	-
3	353587-454	BED (BOTTOM) COVER (PLASTIC)	-	X	X	-	X
4	446493-456	BED (TUBULAR) BOTTOM COVER (PLASTIC)	-	-	-	-	X
4	446493-455	BED (TUBULAR) BOTTOM COVER (PLASTIC)	-	X	X	-	-
5	354895-453	BED (TUBULAR) BOTTOM COVER FASTENING SCREW	-	X	X	-	X
6	364063-451	ARM END COVER SCREW	X	X	X	X	X
7	358387-103	ARM END COVER	-	-	-	-	X
7	358387-102	ARM END COVER	-	-	-	X	-
7	358387-005	ARM END COVER	X	-	-
7	358387-002	ARM END COVER	-	X	-	-	-
8	358387-003	ARM END COVER			X
8	356027-002	BED EXTENSION PLATE (PLASTIC)	-			-	X
8	356027-001	BED EXTENSION PLATE (PLASTIC)	-	X	X	-	-
9	354133-453	FACE PLATE SCREW	X	X	X	X	X
10	358388-005	FACE PLATE COMPLETE	-	-	-	X	X
10	358388-001	FACE PLATE COMPLETE	X	X	X	-	-
11	354826-451	BED (BOTTOM) COVER FASTENING SCREW	-	X	X	-	X

Page 10

PRESSER BAR AND THREAD TAKE-UP

			H	H	H	C	C
			D	D	D	G	G
			1	1	1	5	5
			0	0	1	0	5
REF.	PART NUMBER	DESCRIPTION	2	5	0	0	0
1	357360-000	NEEDLE BAR, PRESSER BAR & VIBRATING BRACKET HOUSING COMPL.	X	X	X	X	X
2	44450-000	NEEDLE BAR BALL BUSHING (LOWER) SOCKET (UPPER)	X	X	X	X	X
3	204514-100	NEEDLE (SIZE No. 14)	X	X	X	X	X
4	141920-455	NEEDLE CLAMP BODY, NEEDLE CLAMP THREAD GUIDE & N. STOP SCRE	X	X	X	X	X
5	357421-000	NEEDLE CLAMP THREAD GUIDE	X	X	X	X	X
6	357429-000	NEEDLE CLAMP BODY	X	X	X	X	X
7	355248-451	NEEDLE THUMB SCREW	X	X	X	X	X
8	446361-001	NEEDLE BAR BALL BUSHING (LOWER) ADJUSTING COLLAR	X	X	X	X	X
9	507379-000	NEEDLE BAR BALL BUSHING (LOWER) SOCKET	X	X	X	X	X
10	446355-001	NEEDLE BAR BALL BUSHING (LOWER)	X	X	X	X	X
11	37943-000	NEEDLE BAR GIB	X	X	X	X	X
12	445793-000	NEEDLE BAR	X	X	X	X	X
13	353549-940	NEEDLE BAR CONNECTING STUD WITH HINGE PIN	X	X	X	X	X
14	353549-000	NEEDLE BAR CONNECTING STUD	X	X	X	X	X
15	37931-000	NEEDLE BAR CONNECTING STUD HINGE PIN	X	X	X	X	X
16	141916-833	NEEDLE BAR CLAMP SCREW	X	X	X	X	X
17	357093-451	NEEDLE BAR VIBRATING BRACKET HINGE PIN NUT	X	X	X	X	X
18	445721-000	NEEDLE BAR VIBRATING BRACKET HINGE PIN RETAINING RING	X	X	X	X	X
19	446359-000	NEEDLE BAR VIBRATING BRACKET HINGE PIN	X	X	X	X	X
20	353520-001	NEEDLE BAR VIBRATING BRACKET COMPLETE	X	X	X	X	X
21	37935-000	NEEDLE BAR DRIVING ARM HINGE BRACKET HINGE PIN	X	X	X	X	X
22	354826-451	NEEDLE BAR DRIVING ARM HINGE BRACKET SCREW	X	X	X	X	X
23	446190-000	NEEDLE BAR DRIVING ARM HINGE BRACKET	X	X	X	X	X
24	353522-001	NEEDLE BAR BALL BUSHING (UPPER) RETAINING RING	X	X	X	X	X
25	357616-000	NEEDLE BAR BUSHING (UPPER) SOCKET SPRING	X	X	X	X	X
26	357615-000	NEEDLE BAR BALL BUSHING (UPPER) SOCKET	X	X	X	X	X
27	446355-001	NEEDLE BAR BALL BUSHING (UPPER)	X	X	X	X	X
28	353521-000	NEEDLE BAR VIBRATING BRACKET	X	X	X	X	X
29	446260-000	THREAD TAKE-UP STUD	X	X	X	X	X
30	445486-000	THREAD TAKE-UP STUD RETAINING RING	X	X	X	X	X
31	543531-000	THREAD TAKE-UP STUD THRUST WASHER	X	X	X	X	X
32	445672-940	THREAD TAKE-UP LEVER ASSEMBLY	X	X	X	X	X
33	445357-950	NEEDLE BAR CONNECTING LINK	X	X	X	X	X
34	446261-000	THREAD TAKE-UP STUD WITH RETAINING RING	X	X	X	X	X
35	357430-001	NEEDLE CLAMP BODY WITH SCREW	X	X	X	X	X
36	113480-451	NEEDLE B. PRESSER B. & VIBRAT. BRAC.HOUSING PL. MOUNT. SCREW	X	X	X	X	X

Page 12

NEEDLE BAR , PRESSER BAR & AUTOMATIC NEEDLE THREADER HOUSING

		H	H	H	C	C
		D	D	D	G	G
		1	1	1	5	5
		0	0	1	0	5
REF.	PART NUMBER DESCRIPTION	2	5	0	0	0

1 445672-000	THREAD TAKE-UP LEVER COMPLETE
2 357788-000	THREAD TAKE-UP STUD
3 446357-000	NEEDLE BAR CONNECTING LINK
4 445486-000	THREAD TAKE-UP STUD RETAINING RING
5 543531-000	THREAD TAKE-UP STUD THRUST WASHER
6 358049-001	NEEDLE BAR VIBRATING BRACKET COMPLETE
7 354826-451	NEEDLE BAR DRIVING ARM HINGE BRACKET SCREW
8 358050-000	NEEDLE LIMITER STOP SUPPORT ASSEMBLY
9 357925-900	VIBRATING BRACKET COVER SCREW
10 357871-900	VIBRATING BRACKET COVER
11 357911-900	VIBRATING BRACKET COVER SPRING
12 179926-451	NEEDLE BAR DRIVING ARM HINGE BRACKET HINGE SPRING RETAINING RING
13 357504-000	NEEDLE BAR DRIVING ARM HINGE BRACKET HINGE PIN SPRING
14 446138-000	NEEDLE BAR DRIVING ARM HINGE BRACKET HINGE SPRING WASHER
15 357503-000	NEEDLE BAR DRIVING ARM HINGE BRACKET
16 357502-001	NEEDLE BAR DRIVING ARM HINGE BRACKET HINGE PIN
17 355272-451	NEEDLE BAR DRIVING ARM HINGE BRACKET SCREW
18 353521-000	NEEDLE BAR DRIVING ARM HINGE BRACKET
19 357615-000	NEEDLE BAR BALL BUSHING UPPER SOCKET
20 357897-900	NEEDLE BAR BALL BUSHING UPPER
21 353549-940	NEEDLE BAR CONNECTING STUD
22 353549-000	NEEDLE BAR CONNECTING STUD WITH HINGE PIN
23 37931-000	NEEDLE BAR CONNECTING STUD HINGE PIN ASSEMBLY
24 141916-833	NEEDLE BAR CLAMPING SCREW
25 204514-100	NEEDLE 2045 –SIZE NBR.14
26 357430-001	NEEDLE CLAMP BODY WITH SCREW
27 355248-451	NEEDLE THUMB SCREW
28 357429-001	NEEDLE CLAMP BODY
29 37943-000	NEEDLE BAR GIB
30 357421-001	NEEDLE CLAMP THREAD GUIDE

X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X
X	X	X	X	X