Silvercrest EIM-803 User Manual

11
10	1
9	2
8	3
7	4
6	6
5

General safety advice

DANGER OF LOSS

OF LIFE OR ACCIDENT TO INFANTS AND CHILDREN! The product is not a toy.

Never leave children unsupervised with the packaging material or the device. The packaging material presents a suffocation hazard and there is a risk of loss of life from electric shock.

This device is not intended to be used by persons (including children) with restricted physical, sensory or mental abilities or with insufficient experience and / or knowledge, unless they are supervised by a person who is responsible for their safety or they have received instruction on how to use the device from such a responsible person. Children should be supervised in order to ensure that they do not play with the device.

GB/IE

Note: Open the protective flap LC display 9 to make settings on the device. Open the protective flap output socket 11 to access the outlet socket.

Press the time button 3 . The digits stop blinking.

Operation

Setting the day of the week and time

Keep the time button 3 pressed during the whole of the following setting procedure.

Press the hour button (h+) 8 repeatedly until the desired hour value appears in the LC display 2 .

Tip: By pressing and keeping pressed the hour button (h+) 8 for approx. 3 seconds you can accelerate the

setting process and reach the desired value more quickly. This quicker method can also be used for making the following settings.

GB/IE

Digital Timer

Introduction

Before using the device for the first time, please make yourself familiar with the way it works. Please refer in addition to the operating instructions

below and the safety advice. Use the device only as described and for the indicated purposes. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation.

Proper use

This product is intended for the automatic switching on and off of electrical devices. Any modification to the device shall be considered as improper use and can lead to considerable risk of accident. The manufacturer will not accept liability for loss or damage arising from improper use. This device is not intended for commercial use.

GB/IE

Use the device only with a properly installed mains outlet socket.

CAUTION! Do not have one digital time switch inserted behind another. There is the danger of mechanical damage if one adapter plug is inserted behind another.

Do not allow the device to be subjected to extreme heat or cold.

Do not cover the device with newspapers, articles of clothing or the like. Otherwise the device may heat up, which is not permitted.

Always check the device for damage before plugging it into a mains outlet socket. Do not use the device if you discover it is damaged in any way. In the event of damage, repairs or other problems with the device, please contact a specialist repair shop.

Do not plug in any devices that hang from and exert their self-weight on the plug. This will prevent any nonpermitted heating up of and mechanical damage to the mains outlet socket.

GB/IE

Press the minute button (m+) 7 repeatedly until the desired minute value appears in the LC display 2 .

Press the day of the week button (Day) 6 repeatedly until the desired day of the week appears in the LC display 2 .

Note: MO= Monday,TU= Tuesday,WE= Wednesday, TH = Thursday, FR = Friday, SA = Saturday, SU = Sunday

Release the time button 3 .

Note: The time switch is now in operation. This is indicated by the flashing of the colon in the LC display 2 .

Activating summer / winter time

Press the minute button (m+) 7 and hour button (h+) 8 simultaneously. In the summer time mode, the additional word “SUMMER” appears in the time indicator, in winter time mode this is absent.

GB/IE

Technical data

Power supply:	240 V  , 50–60 Hz
Maximum load
Ohmic load
(e.g. incandescent bulb):	3000 W, 13 A
IP rating:	IP44 (spray water protected)
Timer accuracy:	+ / – 1 second / day at 20 °C
Shortest switching time:	1 minute
Operating temperature:	–10 °C bis + 55 °C

Description of parts

1Twilight sensor

2LC display

3Time button

4Timer button

5ON / OFF button

6Day of the week button (Day)

7Minute button (m+)

8Hour button (h+)

GB/IE

Do not use the device with power outlet strips or extension cables.

Please note that damage arising from improper handling, non-observance of the operating instructions or interference with the inside of the device by unauthorised persons is excluded from the warranty.

The device is not suitable for inductive loads, e.g. for electric motors or fluorescent lights .

Do not open the device. Never attempt to replace or repair parts yourself.

Before cleaning the device, always disconnect it from the mains outlet socket and pull all mains plugs out of the device.

Please ensure that the device is always easily accessed. In the event of malfunctions, pull the device out of the mains outlet socket.

GB/IE

Operating the time switch manually

Note: If the indicator “A” appears in the LC display 2 , the time switch switches according to the programmed switching times and the twilight sensor. If the indicator “A” does not appear in the LC display 2 , then the device can be switched on and off manually.

Press the ON / OFF button	5	for approx. 5 seconds
to activate the switching times and the twilight sensor.
The indicator “A” appears in the LC display				.
			2
Switching manually:
Press the ON / OFF button		for about 5 seconds.
	5

The indicator “A” appears in the LC display 2 . The

manual mode is now active. The twilight sensor and the activated switching times are not activated.

Now press the ON / OFF button 5 once to switch the time switch on or off.

GB/IE

9 Protective flap LC display 2

10Reset button (R)

11Protective flap outlet socket

Safety

Read all the safety advice and instructions.

Failure to observe the safety advice and instructions may result in fire and / or serious injury.

KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE!

GB/IE

Before use

The time switch has an integral rechargeable battery. This serves to retain stored data, e.g. time, date and switching procedures. The rechargeable battery must be charged for 24 hours before first use. You can make settings on the device during the charging process.

Plug the device into a properly installed 220–250 V / 

50 Hz mains outlet socket.

As soon as the flashing digits appear on the LC display, press the reset button 10 using a sharp object.

Note: In the event of a power cut, the in-built rechargeable battery ensures that the time is kept going and the existing settings are retained. The device is fully programmable without a power supply, as long as the rechargeable battery is fully charged.

GB/IE

Entering switching times

You can enter values for 9 on / off switching programs on this time switch.

ATTENTION! The program periods must not overlap Otherwise the device may malfunction. A program period always consists of a switching-on time and a switchingoff time, which must be entered one after the other. If only the switching-on time has been programmed then the attached consumer will not be switched off until another program period becomes active.

Switching-on time:

Press the timer button 4 once. The ON 1 “- - : - -” indicator appears in the LC display 2 .

Press the hour button (h+) 8 repeatedly until the desired hour value appears in the LC display 2 .

Press the minute button (m+) 7 repeatedly until the desired minute value appears in the LC display 2 .

GB/IE

Press the day of the week button (Day) 6 repeatedly until the desired day of the week or block of days of the week appears in the LC display 2 . The following days of the week or blocks of days of the week are possible:

• MO TU WE TH FR

Monday – Friday

• SA SU

Saturday + Sunday

• MO TU WE TH FR SA

Monday – Saturday

• MO WE FR

Monday + Wednesday + Friday

• TU TH SA

Tuesday + Thursday + Saturday

• MO TU WE

Monday – Wednesday

• TH FR SA Thursday – Saturday

GB/IE

Cancelling switching times

Press the timer button 4 . The programmed switching times appear in the display.

Press the ON / OFF button					5		to cancel the selected
programmed switching time. The symbol “H I : d E”
appears in the LC display			2	.
Press the ON / OFF switch						for longer than 5 seconds
				5
to cancel the switching time. The “- - : - -” symbol appears
in the LC display	2	.

Switching the time switch manually

At any time, and independently of programmed times, you can manually skip a subsequent switching time.

To do this, press the ON / OFF button			5	until the
symbol “A” disappears from the time indicator.
Press the ON / OFF button	5	once to choose between
the following options:
OFF: All switching times are cancelled and the attached
consumer is permanently switched off.
				GB/IE
66402_Zeitschaltuhr_Daemmerungssensor_LB6.indd				1

•MO TU WE TH FR SA SO Monday – Sunday

Note: As soon as a particular day or combination of days has been stored, the device executes the programmed on / off switching program at the same time on each of these days of the week.

Press the timer button 4 again to store the setting.

The OFF 1 “- - : - -” indicator appears in the LC display 2 .

Note: Two switching programs must be set if the desired switching program overlaps the time 12:00 pm. In this case, one of the programs ends at 11:59 pm and the next starts at 12:00 am.

Switching-off time:

Press the hour button (h+) 8 repeatedly until the desired hour value appears in the LC display 2 .

GB/IE

ON: All switching times are cancelled and the attached consumer is permanently switched on.

Press ON / OFF switch 5 for about 5 seconds. The switching times and twilight sensor are activated again. The indicator “A” appears in the LC display 2 .

Setting the random mode

Note: This function switches the time switch arbitrarily on and off. This is intended to prevent burglaries by simulating an occupied house with e.g. lights switching on and off at irregular intervals. Your preprogrammed switching commands are moved by a random amount up to 30 minutes on each day. This function is only possible if one or more switching commands have been set.

Press the day of the week button (Day) 6 and hour button (h+) 8 simultaneously. The symbol “Timer” flashes in the LC display 2 and the random mode is switched on.

GB/IE

Press the minute button (m+) 7 repeatedly until the desired minute value appears in the LC display 2 .

Press the day of the week button (Day) 6 repeatedly until the desired day of the week or block of days of the week appears in the LC display 2 .

Press the timer button 4 again to store the setting.

Press the time button 3 to return to normal operating mode.

Note: You can program up to 9 different on / off programs. To do this, repeat the above-described programming procedure in each case. The ON 2 “- - : - -” indicator etc. appears in the LC display 2 when each further setting is stored. As

soon as you have programmed at least one switching time, the symbol “A” appears in the time indicator.

GB/IE

Press the day of the week button (Day) 6 and the hour button (h+) 8 again to cancel the random mode.

Setting the countdown

Press the timer button 4 to access the timer menu.

Press and keep pressed the timer button					4			until the
“ONC” symbol appears in the LC display								.
						2
Press the ON / OFF button				to switch the countdown
			5
function on and off.
Press the hour button (h+)			repeatedly until the desired
	8

hour value appears in the LC display 2 .

Press the minute button (m+) 7 repeatedly until the desired minute value appears in the LC display 2 .

Press the timer button					3	to store the setting. The
current time appears again.
Press the time button						and the ON / OFF button
					3

5 simultaneously to start the countdown.

Note: The countdown can be set from 1 minute to 99 hours, 59 minutes.

GB/IE

Changing or checking switching times

To change or check the switching times, press the timer button 4 and the programmed switching times appear

one after the other in the display.

To change the days, hours or minutes, proceed as described in the section “Entering switching times”.

Skipping switching times

Press the timer button 4 . The programmed switching times appear one after the other in the display.

Press the ON / OFF button									5	to cancel the selected
programmed switching times. The symbol “H I : d E”
appears in the LC display								.
							2
Press the time button							to return to normal operating
					3
mode.
Note: The programmed switching times are not deleted
from the memory and can be reactivated by pressing the
ON / OFF button	5	again.

GB/IE

Manually ending the countdown

Press the ON / OFF button									5	to halt the countdown.
Press the ON / OFF button										again to continue the
									5
countdown.
Press the time button				3				to change from the countdown
display to the current time.
Press the time button								again to change from the
						3
current time to the countdown display.
Press the time button						3		and the ON / OFF button

5 simultaneously to cancel the countdown.

Twilight sensor

This function orients the time switch’s switching times to dawn and dusk twilight. The programmed switching times are automatically adjusted to the light conditions. The time switch automatically switches on or off as soon as the twilight sensor 1 detects a change of light conditions lasting for

more than 15 seconds. This function is only active at dawn or dusk. It does not affect operation during the day or night.

GB/IE

02.08.11 09:13