Silent Knight SK-5207 User Manual

Model 5207 Fire Alarm

Built-in Touchpad Operating Instructions

These instructions must be framed and displayed next to the Model 5207 panel in accordance with NFPA 72 fire code for Local Protected Fire Alarm Systems.

Basic Operation of Built-in Touchpad

Function							Keystrokes
System test*	0		ENTER
Reset alarms (or smoke detectors)*	1		ENTER
Clear alarm memory*	2		ENTER
						+ code 0 or 1
Reset dialer	3		ENTER
						+ code 0 or 1
Start download	4		ENTER
Alarm memory display	5		ENTER
Display troubles	6		ENTER
						+ code, or				+ code
Silence troubles or alarms*	7		ENTER						SILENCE
		Zone # +
Disable/Enable zones					DISABLE
			0				+ code 0 or 1
Begin fire drill	2			ENTER

The system sounds an alarm and reports a fire test when you exit fire drill mode.

					+ code 0 or 1
End fire drill		SILENCE
						+ code
Walk test		2	2	ENTER
						+ code
Zone Troubleshooting mode		2	5	ENTER
						+ code 0
Step Programming mode		2	7	ENTER

Function

Set date*

For example, to set the date of Jan. 13, 1995, enter:

0 1 1 3 9 5

Set time*

For example, to set the time of Wed., 4:30 p.m., enter:

3 1 0 4 3 0

Keystrokes

8 ENTER + 6-digit date

Use mmddyy format for date, where:

mm = Month (enter leading 0 for 1-digit months) dd = Day (enter leading 0 for 1-digit days)

yy = Year

9 ENTER + 6-digit date

Use wdhhmm format for time, where:

w= Day of week (0=Sun., 1=Mon., 2=Tue., 3=Wed., 4=Thu., 5=Fri., 6=Sat.)

d = Time of day (0=AM, 1=PM)

hh = Hour (enter leading 0 for 1-digit hrs.) mm = Minutes (enter leading 0 for 1-digit min.)

To exit download, set date, and set time modes, press CLEAR CLEAR .

*These functions do not require you to enter a valid operating code unless the NEED CODE AT PANEL option is selected during programming.

For service call:

Form # 150486