s
Be inspired
Contents
Contents
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Pack contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Notes on installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Use as desktop unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Mounting the base as a wall unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connecting the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connecting auxiliary equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Setting and operating the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Registering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 De-registering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Locating a handset (paging) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Supported handsets . . . . . . . . . . . . . . . . . . . . . . . . 15
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
The quick way into the world of ISDN . . . . . . . . . 19
Answering Machine . . . . . . . . . . . . . . . . . . . . . . . . 20
Operation using a registered handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Remote control of answering machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Connecting devices . . . . . . . . . . . . . . . . . . . . . . . . |
26 |
Connecting cord-based analogue devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 26 |
Making calls with devices on the analogue connection (TAE connection) . . . . . . . |
. 28 |
Defining the device type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
29 |
Connecting PC via USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
30 |
Gigaset Repeater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
30 |
Operation of entrance telephone . . . . . . . . . . . . . |
31 |
Connecting entrance telephones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
31 |
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Contact with liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Questions and Answers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Service (Customer Care) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
37 |
1
Contents
ISDN glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
2
Safety precautions !
$ Usestation.only the power unit supplied, as indicated on the underside of the base
The operation of medical appliances may be affected. Be aware of the technical conditions within the particular environment (e.g. doctor's practice).
Do not install the base in bathrooms or shower rooms. The handset and base are not watertight.
Do not use the phone in environments subject to explosion hazard (e .g. auto paint shops).
ƒIf you give your Gigaset to someone else, make sure you also give them the operating manual.
Dispose of the batteries and phone in accordance with environmental regulations.
3
Getting started
1 base
1 power supply cord with power unit
1 ISDN connection cable
1 USB cable
1 wall holder
Operating instructions
The installation location must have a 220/230V~ mains outlet and an ISDN telephone connection.
For optimum radio reception, you should install the base at a central point wherever possible.
The installation location should not be in the immediate vicinity of other equipment, e. g. hi-fi, television, office or microwave equipment, in order to prevent mutual interference. Minimum distance (including to base power unit): 1.5 metres.
In case of picture and sound interference on satellite reception equipment, please contact your retailer to have your satellite reception system checked for a lack of screening.
Avoid direct contact with sources of heat (e .g. radiators).
Do not expose the base to direct sunlight.
The base can also be wall mounted, using the wall holder included in the pack.
If you are not using wall mounting, install the base on a level, non-slip surface. The feet of the device do not normally leave any marks on the installation surface. However, in view of the variety of paints and polishes available, it cannot be ruled out, that contact may cause marks on the installation surface.
The range between the base and the handsets is up to 300 m in the open air. Inside buildings, ranges of up to 50 m can be achieved.
Your telephone can be used as a space-saving desktop unit. Before connecting the base, please read the notes on installation (page 3, page 4).
4
Getting started
Before mounting the base, please read the notes on installation (page 3, page 4).
1.Drill two holes ( 5 mm) 80 mm apart next to one another in the wall.
2.Use appropriate rawlplugs.
3.Screw in two round screws ( 4 mm).
4.Before attaching the wall holder and tightening the screws, place the connection cable through the holder from the back to the front. Ensure that the connection cable lies freely in the back recess.
5.Now plug the connection cable into the base (see Connecting the base).
6.Using slight vertical pressure from the top centre, press the base onto the retaining catches on the wall holder.
5
Getting started
5.
1.
4.Front of unit
3.
2.
Schematic illustration
1.-S0 jack: Insert ISDN connection cable until connector clicks into place.
2.Insert ISDN connection cable into ISDN connection until connector clicks into place.
3.For NTBA with self-mounting, plug in the cable between the NTBA and the TAE (old telephone outlet) or Mini-Western connector until both connectors click into place.
4.jack: Plug in the power supply cord, until the connector clicks into place and plug into the mains outlet.
!Use only the power unit supplied, as indicated on the underside of the base station.
Power failure:
Your base and the handsets registered on it, as well as wire-based termi- i nals cannot operate in case of power failure. However, all the settings
and stored information (messages, phonebook entries etc.) are retained indefinitely.
6
Getting started
You can connect the following auxiliary equipment to your base:
up to eight wireless devices (handsets see page 9, Gigaset data modules see page 30, Gigaset Repeater see page 30)
up to two analogue, wire-based devices (e.g. telephone, answering machine, fax machine, entrance telephone – see page 26)
a PC via USB port (USB V1.1 – see page 30)
Connection in Germany
Connection for the wire- |
Connection for the wire- |
based terminal with inter- |
based terminal with inter- |
nal number 22 |
nal number 21 |
USB
ISDN
The connections are provided for the use of analogue terminals using TAE
Schematic illustration connectors.
Connection in other countries
Connection for the wire- |
Connection for the wire- |
based terminal with inter- |
based terminal with inter- |
nal number 22 |
nal number 21 |
|
|
|
|
|
|
USB |
|||
ISDN |
|
|
|
|
|
|
The connections are provided for the |
||
|
|
|
||
|
|
|
use of standard terminals using Mini- |
|
|
|
|
Western connectors. |
|
|
Schematic illustration |
|
|
|
|
|
|
7
Getting started
In order to be able to use your base, certain settings are required, e. g. the ISDN phone number (MSN). To do this, you need a handset or a PC. More details can be found in the operating instructions for your handset or your PC software.
If you have an S1 or SL1 added-feature handset, a Getting started wizard is available to assist you in making the settings. More details can be found in the operating instructions for your added-feature handset.
Operating instructions for the S1, SL1, C1 and C2 handsets are enclosed.
The current version of the operating instructions is available on the Internet at www.my-siemens.com/gigaset.
Below, examples of operating the base from an S1 or SL1 handset and a C1 or C2 handset are presented for "Assigning an MSN a ringer melody".
Operating the base from an S1 or SL1 handset
The central operator control on the S1 and SL1 handsets is a control key p, which has four black direction arrows with the associated symbols. Pressing the various icons (up, down, right, or left) opens a different function. The side you have to press is shown by a black triangle in the operating instructions, e.g.: vkey for right = open menu.
Example: "Assigning an MSN a ringer melody"
|
|
|
|
|
|
v |
|
|
Open the menu. |
||
s Set base |
|
Select the menu item and confirm. |
|||
OK |
|
||||
|
|
|
|
|
|
s Settings |
|
Select the menu item and confirm. |
|||
OK |
|
||||
|
|
|
|
|
|
~ |
|
|
|
|
Enter system PIN if required (page 10). |
OK |
|
|
|||
|
|
|
|
|
|
s ISDN settings |
|
Select the menu item and confirm. |
|||
OK |
|
||||
|
|
|
|
|
|
s Set up MSN |
|
Select the menu item and confirm. |
|||
OK |
|
||||
|
|
|
|
|
|
s |
|
|
Select MSN, e.g. MSN1: Anna. |
||
v |
|
|
Open the submenu. |
||
r Ringer Melody: 5 |
|
Select melody and confirm, e.g. Ringer Melody: 5 |
|||
OK |
|
||||
|
|
|
|
|
(‰= activated). |
Operating the base from a C1 or C2 handset
The C1 and C2 handsets each have a rocker key, which has two functions.
On the Gigaset C1, the upper half of the rocker key has the function of the Talk key c, the lower half the Phonebook key h.
On the Gigaset C2, the upper half of the rocker key has the function of the Talk key c, the lower half the Handsfree key d.
8
|
|
|
Getting started |
|
|
Example: "Assigning an MSN a ringer melody" |
|||
|
|
|
|
|
|
MENU |
|
Open the menu. |
|
|
|
|
|
|
|
s Set base |
OK |
Select the menu item and confirm. |
|
|
s Settings |
OK |
Select the menu item and confirm. |
|
|
~OK |
|
Enter system PIN if required (page 10). |
|
|
s ISDN settings |
OK |
Select the menu item and confirm. |
|
|
s Set up MSN |
OK |
Select the menu item and confirm. |
|
|
s |
|
Select MSN, e.g. MSN1: Anna. |
|
|
MENU |
|
Open the submenu. |
|
|
|
|
|
|
|
s Ringer Melody: 5 |
OK |
Select melody and confirm, e.g. Ringer Melody: 5 |
|
|
|
|
(‰= set). |
|
|
Registering handsets |
|
|
|
|
|
|
|
|
You can register a maximum of eight wireless devices on your base (including Gigaset data modules (page 30) and Gigaset Repeater (page 30)). The internal numbers 11-18 are set aside for this purpose. Wire-based analogue devices do not have to be registered (page 26).
If the internal numbers Int.11 to Int.18 on your telephone have already been assigned, please de-register another handset you no longer require before registering a new one (see handset operating instructions).
If necessary, keep the handset operating instructions to hand with their description of the registration process.
You must initiate handset registration on the handset and on the base.
1. On the base
Press the registration/paging key on the base for about 3 seconds. This starts the registration. The base is ready for registering for 30 seconds.
Press the lit Registration/Paging key
2. On the handset (within 30 sec.)
Register your handset (see handset operating instructions).
i |
If the handset cancels base paging, e. g. because the registration time has |
been exceeded, repeat the process. |
|
|
|
9
Getting started
Manually registering a Gigaset S1 / SL1 handset
|
|
|
|
|
|
v |
|
|
Open the menu. |
||
s Settings |
|
Select the menu item and confirm. |
|||
OK |
|
||||
|
|
|
|
|
|
s Register H/Set |
|
Select the menu item and confirm. |
|||
OK |
|
||||
|
|
|
|
|
|
s Base 1 |
|
Select base (1–4) and confirm, e. g. Base 1. |
|||
OK |
|
||||
|
|
|
|
|
|
~ |
|
|
|
|
Enter the system PIN of the base (factory setting: |
OK |
|
|
|||
|
|
|
|
|
0000) and confirm. In the display are Regstr.Proce- |
|
|
|
|
|
dure and the name of the base, e. g. Base 1. |
|
|
|
|
|
Once the handset has located the base, the list of |
|
|
|
|
|
free internal numbers is shown in the display. |
|
|
|
|
|
|
|
|
|
|
|
Press lit Register key on the base (page 9), key |
|
|
|
|
|
flashes. The base is only ready for registering while |
|
|
|
|
|
the key is flashing. |
|
|
|
|
|
|
s Int.11 |
|
Select internal number and confirm, e. g. Int.11 . |
|||
OK |
|
||||
|
|
|
|
|
|
After registration the handset reverts to idle status. The handset's internal number is shown in the display.
Manually registering a Gigaset C1 / C2 handset
MENU |
|
Open the menu. |
|
|
|
s Handset Settings |
OK |
Select the menu item and confirm. |
s Register Handset |
OK |
Select the menu item and confirm. |
s Base 1 |
OK |
Select base (1–4) and confirm, e. g. Base 1. |
~OK |
|
Enter the system PIN of the base (factory setting: |
|
|
0000) and confirm. In the display are Registering |
|
|
and the name of the base, e. g. Base 1. |
|
|
Once the handset has located the base, the list of |
|
|
free internal numbers is shown in the display. |
|
|
|
|
|
Press lit Register key on the base (page 9), key |
|
|
flashes. The base is only ready for registering while |
|
|
the key is flashing. |
|
|
|
s Int.11 |
OK |
Select internal number and confirm, e. g. Int.11 . |
After registration the handset reverts to idle status. The handset's internal number is shown in the display.
10
Getting started
Registering a Gigaset 4000 Comfort/Micro handset
|
|
|
|
|
a |
|
|
Hold down, to turn on the handset. |
|
either ... |
|
|
|
|
|
|
|
|
|
OK |
|
|
Confirm the prompt. |
|
|
|
|
|
|
or ... |
|
|
|
|
|
|
|
|
|
G Settings |
OK |
Select the menu item and confirm. |
||
G Register H/Set |
OK |
Select the menu item and confirm. |
||
G Base 1 |
OK |
Select base (1–4) and confirm, e. g. Base 1. |
||
... then |
|
|
|
|
|
|
|
|
|
~OK |
|
|
Enter the system PIN of the base (factory setting: |
|
|
|
|
|
0000) and confirm. |
|
|
|
|
|
|
|
|
|
Press lit Register key on the base (page 9), key |
|
|
|
|
flashes. The base is only ready for registering while |
|
|
|
|
the key is flashing. |
|
|
|
|
|
s Int.11 |
|
OK |
Select internal number and confirm, e. g. Int.11 . The |
|
|
|
|
|
successful registration is confirmed on the display. |
Registering a Gigaset 4000 Classic handset |
||||
|
|
|
||
i |
|
You can register a maximum of four Gigaset 4000 Classic handsets. |
||
|
Register Gigaset 4000 Classic handsets before other handsets. |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press lit Register key on the base (page 9), key |
|
|
|
|
flashes. The base is only ready for registering while |
|
|
|
|
the key is flashing. |
|
|
|
|
|
a |
|
|
Hold down, to turn on the handset. |
|
YES |
|
|
Confirm the prompt. |
|
|
|
|
|
|
~OK |
|
|
Enter the system PIN of the base (factory setting: |
|
|
|
|
|
0000) and confirm. |
|
|
|
|
The handset is registered. |
|
|
|
|
|
The next unassigned internal number between Int.11 and Int.18 is automatically assigned to the handset as it is registered.
11
Getting started
Registering a Gigaset 3000 Comfort/Micro handset
− |
|
Hold down, to turn on the handset. |
either ... |
|
|
|
|
|
OK |
|
Confirm the prompt. |
|
|
|
or ... |
|
|
|
|
|
. |
|
Open the menu. |
s Stations |
OK |
Select the menu item and confirm. |
s Station 1 |
Í |
Select the base (1-4) and open the sub-menu. |
s Registration |
OK |
Select the menu item and confirm. |
... then |
|
|
|
|
|
~OK |
|
Enter the system PIN of the base (factory setting: |
|
|
0000) and confirm. |
|
|
|
|
|
Press lit Register key on the base (page 9), key |
|
|
flashes. The base is only ready for registering while |
|
|
the key is flashing. |
|
|
|
s Int.11 |
OK |
Select internal number and confirm, e. g. Int.11 . The |
|
|
successful registration is confirmed on the display. |
The next unassigned internal number between Int.11 and Int.18 is automatically assigned to the handset as it is registered.
Registering a Gigaset 3000 Classic handset
− |
|
Hold down, to turn on the handset. |
¦¨« |
|
Press in turn. |
~OK |
|
Enter the number of the base (normally 1) and con- |
|
firm. The Standby symbol C flashes and then lights |
|
|
|
up constantly when the connection to the base has |
|
|
been established. |
|
|
|
~OK |
|
Enter the system PIN of the base (factory setting: |
|
|
0000) and confirm. |
|
|
Press lit Register key on the base (page 9), key |
|
|
flashes. The base is only ready for registering while |
|
|
the key is flashing. |
|
|
|
s Int.11 |
OK |
Select internal number and confirm, e. g. Int.11 . The |
|
|
Standby symbol is extinguished after successful reg- |
|
|
istration. |
|
|
|
12
Getting started
Registering a Gigaset 2000 C handset
|
|
|
h |
|
Press to turn on the handset. |
. |
|
Open the menu. |
s Settings |
OK |
Select the menu item and confirm. |
s Registration |
OK |
Select the menu item and confirm. |
s Station 1 |
OK |
Select base (1-4) and confirm. |
Í |
|
Open the submenu. |
s Registration |
OK |
Select the menu item and confirm. |
~OK |
|
Enter the system PIN of the base (factory setting: |
|
|
0000) and confirm. |
|
|
|
|
|
Press lit Register key on the base (page 9), key |
|
|
flashes. The base is only ready for registering while |
|
|
the key is flashing. |
|
|
|
s Int.11 |
OK |
Select internal number and confirm, e. g. Int.11 . The |
|
|
successful registration is confirmed on the display. |
Registering a Gigaset 2000S / Gigaset 1000 C/S handset
For the registration procedure described below:
You can register a maximum of four other handsets (e. g. Gigaset 2000S, GAP handsets) or wireless devices (e. g. Gigaset 1000 TAE, STA). Register these devices first.
Registering a Gigaset 2000S handset
h |
Press h(off). |
oh |
Simultaneously press the number of the base station |
|
and h(on). |
o |
Enter system code. |
|
Press lit Register key on the base (page 9), key |
|
flashes. The base is only ready for registering while |
|
the key is flashing. |
|
|
The lowest free internal number is assigned. It is not possible to select a free internal number.
Registering a Gigaset 1000 C/S handset
For the registration procedures, please refer to the corresponding operating instructions.
13
Getting started
Handsets are de-registered using a handset (see handset operating instructions). Example:
|
|
Open the menu. |
|
|
|
s Base Settings |
OK |
Select the menu item and confirm. |
s Settings |
OK |
Select the menu item and confirm. |
~OK |
|
Enter system PIN if required. |
s Setup user |
OK |
Select the menu item and confirm. |
s De-reg. device |
OK |
Select the menu item and confirm. |
s Int.16 |
OK |
Select the handset that you wish to de-register and |
|
|
confirm, e.g. Int.16. |
The other registered devices retain their previous internal numbers.
If you have mislaid your handset you can page it with the help of the base. The Registration/Paging key is located on the top of the base (page 9).
Paging:
Press the Registration/Paging key on the base for 1 second. All handsets will ring together ("Paging").
End paging:
Press the Registration/Paging key on the base for a maximum of 1 second or the Talk key on the handset.
14
Supported handsets
The SX205isdn and SX255isdn bases support the S1, SL1, C1 and C2 handsets. Operating instructions for these handsets are enclosed. The current version of the operating instructions is available on the Internet at www.my-siemens.com/gigaset or contact the hotline (page 34).
When used in conjunction with a Gigaset handset, your SX205isdn or SX255isdn base offers you a variety of features. Depending on the handset used, you have access to a particular range of these features. The table below tells you which features can be used with which handsets. The table is based on the table of contents of the handset operating instructions.
Feature |
S1 |
SL1 |
C2 |
C1 |
Making the handset ready for service |
|
|
|
|
|
|
|
|
|
Operating the handset – Menu system |
|
|
|
|
Control key |
Yes |
Yes |
No |
No |
|
|
|
|
|
Preparing base for use – Getting started wizard |
Yes |
Yes |
No |
No |
|
|
|
|
|
Making calls |
|
|
|
|
Handsfree |
Yes |
Yes |
Yes |
Yes |
|
|
|
|
|
Reserving a line |
Yes |
Yes |
No |
No |
|
|
|
|
|
Defining the send MSN for the next call |
Yes |
Yes |
No |
No |
|
|
|
|
|
Callback when busy (CCBS) / when the call is not |
Yes |
Yes |
Yes |
Yes |
answered (CCNR) |
|
|
|
|
|
|
|
|
|
Identify caller |
Yes |
Yes |
No |
No |
|
|
|
|
|
Functions during a call |
|
|
|
|
|
|
|
|
|
Muting the handset |
Yes |
Yes |
No |
No |
|
|
|
|
|
Making a call to several users |
Yes |
Yes |
Yes |
Yes |
|
|
|
|
|
External / Internal enquiry |
Yes |
Yes |
Yes |
Yes |
|
|
|
|
|
Toggling |
Yes |
Yes |
Yes |
Yes |
|
|
|
|
|
Conference call |
Yes |
Yes |
Yes |
Yes |
|
|
|
|
|
Forwarding an incoming call – CD (Call Deflection) |
Yes |
Yes |
No |
No |
|
|
|
|
|
Working with external call waiting – CW (Call Waiting) |
Yes |
Yes |
Yes1 |
Yes1 |
Using the phonebook and other lists |
|
|
|
|
|
|
|
|
|
Phonebook and speed dial list 2 |
Yes |
Yes |
Yes |
Yes |
Dialling with the phonebook/speed dial list |
Yes |
Yes |
Yes |
Yes |
|
|
|
|
|
Copying and changing a phonebook entry |
Yes |
Yes |
Yes |
No |
|
|
|
|
|
Marking a phonebook entry as VIP |
Yes |
Yes |
Yes |
No |
|
|
|
|
|
Adding a displayed telephone number to the phone- |
Yes |
Yes |
Yes |
Yes |
book |
|
|
|
|
|
|
|
|
|
Sending a single entry or complete list to a handset |
Yes |
Yes |
Yes |
No |
|
|
|
|
|
Saving an anniversary for a phone number |
Yes |
Yes |
No |
No |
|
|
|
|
|
Voice dialling |
Yes |
Yes |
No |
No |
|
|
|
|
|
15