Si SI-H500 Datasheet
PROJECTOR LIFT SI-H 500
The heavy projector lift series SI-H is
a very strong and reliable brand new
range of lifts specically developed for
large venue applications where large
projectors need to be moved.
The SI-H 500 lift is equipped with heavyduty but silent motor which assures a
fast and stable up-down movement of
the projector. Furthermore, the motor
is provided with an RF remote control
and offers the possibility to set three
motor limit stops: an upper stop limit, an
intermediate one and a down one.
The intermediate stop can be set at
the desired height for PROJECTION
MODE, whereas the down one can be
adjusted up to 500 cm. stroke to be
used as SERVICE MODE position.
Optional: Remote control interface unit
for control room systems.
Also a SAFETY DEVICE is built-in in
order to offer maximum security in case
of any failure of the mechanism.
The projector anchoring frame movement
is controlled by two strong steel cables
that are certied for a maximum load of
350 kg. each.
PROJECTOR LIFT
PARTIALLY OPENED
PROJECTOR LIFT
COMPLETELY CLOSED
A unique and professional CABLE MANAGEMENT SYSTEM is
supplied integrated in the product. This allows to connect safely
and tidily the projector with the power and signal cables.
This projector lift series are developed in order to support
projectors up to 70 kg.
The maximum outside dimension of the projector that can be
xed under the lift has to be less than the size of the upper
frame of the lift (see maximum frame sizes indicated in the upper
view drawing).
Moreover, the anchoring points of the projector have to be within
a maximum width of 54 cm. and a maximum depth of 58 cm.
(see drawing of the projector anchoring system).
green company
TECHNICAL SPECIFICATIONS
• POWER SUPPLY 220-230 V - 50 HZ
• MAXIMUM CONSUMPTION 265 W
• TORQUE 60 Nm
• MOTOR SPEED 11 Rpm
• ROLL UP SPEED 19 sec./metre
• ROLL DOWN SPEED 24 sec./metre
• DIMENSIONS SI-H 500 CLOSED 79,8x70,5x89 (WxHxD in cm.)
• MAX DIMENSIONS SI-H 500 OPENED 79,8x570,5x89 (WxHxD in cm.)
• MAXIMUM LOAD OF THE PROJECTOR KG. 70
• NET WEIGHT OF SI-H 500 KG. 77
SI-H 500 CLOSED 70,5 CM
SI-H 500 OPEN 570,5 CM
SIDE VIEW
B
58
54
7
DRAWING OF THE PROJECTOR
ANCHORING SYSTEM
A
In the “upper view” drawing we show two different ways to install the ceiling mounting brackets.
At point “A” you can see the brackets mounted
turned outside.
At point “B” you can see the brackets mounted
turned inside.
All four brackets can be mounted towards inside
or towards outside.
UPPER VIEW
Euroscreen S.r.l.
Via Stiria, 45/16 - 33100 Udine - Italy
Tel. +39 0432 522755
Fax +39 0432 524000
www.screenint.com
info@screenint.com
* The measures of the drawings are expressed in centimetres.
Euroscreen S.r.l. has reserved the right to modify its products at anytime without obligation of notice, in order to improve their performances.
Loading...