ShoreLand'r SLR40TBBLW User Manual V.1
®
SLR40TBBLW
SLR40TBBLW Bundles Required:
4300241 ST175/80R13C MR Tire/TS Dir Rim ........2
(or)
4300240 ST175/80R13C MR Tire/Galv Dir Rim......2
66520 Bag with Chains, No Coupler ...................1
62340 Literature Bag - Trailers ............................1
80292-- Frame Bundle - 2X4W R40TBBLW .........1
66996-- Tongue Assembly 55”, W/UFP Actuator ...1
66541 Brake Kit - Tandem Axle Connection ........1
ShoreLand’r offers their product line in either galvanized or painted finish. When ordering parts it is
important that you specify the finish or color you have
on your product. The five (5) digit number along with
a two (2) digit space _ _, note the parts which can be
purchased with various finishes. When ordering these
items use the five (5) digit number along with a two (2)
digit suffix for the proper finish.
00 ....... Galvanized
01 ....... Arctic White
03 ....... Black
33 ....... Galvanized w/Black Plastic Parts
Table of Contents: Page
Frame Drawing & Bill of Materials ......................2-3
Roller Assembly Instructions ..............................3
Tongue & Safety Chain Dwg/BOM/Assy Instr. ....4-5
Safety Instructions .............................................. 5
White Ground Wire Installation Instructions .......5
Brake Line Instructions ....................................... 5
Profile 2000 Winch Dwg/BOM/Assy Instr. .........6-7
Chassis Drawing & Bill of Materials ....................8-9
Tire Size & Carrying Capacity Chart ...................9
Rocker Arm Instructions .....................................9
Spring Assembly Instructions .............................9-10
Axle Assembly Instructions .................................10
One Axle Brake Instructions ............................... 10
Dual Axle Brake Instructions ..............................10-11
Tire & Wheel Assembly ......................................11
Trailer Adjustments .............................................11-12
Axle Adjustments ................................................11
Rear Support System Adjustments ....................11
Roller Adjustments .............................................11
Front Roller Support System Adjustments .........11
Winch Post Adjustments .....................................12
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003454
Page 1
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003454
Page 2
FINAL ASSEMBLY INSTRUCTIONS
Remove the hardware bag from the frame, remove
parts and sort by size.
R SERIES
The R-series roller rack is installed by placing the
roller arm assembly mounting channel over the rear
cross member and securing in place with a 1/2” x
4-1/2” hex bolt and lock nut. (See Diagram A). Note
that it should be left loose until the boat is placed on
the trailer. Once the proper positions is determined, it
may be tightened. Repeat on the other roller arm
assembly.
The short stabilizer bunk is installed to the adjustable
bunk bracket on the front cross member with a 3/8” x
1” hex bolt and lock nut. (See Diagram A).
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003454
Page 3
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003454
Page 4
Loading...