ShoreLand'r LAV59TCBBL User Manual V.1
®
LAV59TCBBL
LAV59TCBBL 2X5 Larson Trailer
69082 Literature Bag - Trailers (Brakes)
80737__ Frame Bundle - LAV59TCBBL
*ST215/75D14C Carl Bias/Chrome Rim
TA0120 Tie down Retractable 1 Pair
3310050 Jack 1000 LB Swivel
69352 Brake Kit Tandem Axle Connection Hose
*Check with your dealer/customer service representative for current tire/rim assembly
part number.
ShoreLand’r offers its product line in painted nishes. When
ordering parts, it is important that you specify the nish or color
you have on your product. The 5-digit number along with a 2-digit
space _ _, note that the parts can be purchased in various nishes.
03..........Black
24..........Burgundy
29..........Dark Blue
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0004186
03/24/2010
Page 1
LAV59TCBBL Specications
Capacity 5900 lbs.
GVWR: 7480 lbs.
GAWR: 3740 lbs.
Ship Wt: 1280 lbs.
Frm Size: 2X5 (10 Ga)
Tire Size: ST215/75D14C
Rim Size: 14 X 6 “J”
Brake: Surge Hydraulic
Coupler: 2” Actuator, 7000 lbs.
Suspension: 5 Leaf Hook Springs
Tongue Size: 3X5X65” Swing Tongue
Diagram A
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0004186
03/24/2010
Page 2
FINAL ASSEMBLY INSTRUCTIONS
Remove all banded items and the hardware bag from the frame.
Remove the parts and sort by size.
TONGUE
Locate the tongue and install by sliding it in the front of the tongue
channel.
Line the holes in the tongue with the holes in the tongue channel.
Install the 1/2” x 4” hex bolt in the front cross hole and secure with
a 1/2” ange lock nut.
Remove the wire harness from the rear of the tongue. Place the
wire harness and the brake hose through the hole provided in the
tongue cover plate.
Secure the tongue cover plate in position with the same 1/2” x
1-1/2” hex bolt that secures the back on the tongue to the tongue
channel of the frame. Secure with a 1/2” lock nut. Tighten both bolts
just installed.
Plug the tongue wire harness ends into the frame harnesses by
matching colors and ends. Push the extra wire provided into the
rear of the tongue. The wire should be positioned so the only thing
exposed to the outside of the tongue and side frame is the black
wire loom.
TONGUE BRAKE HOSE CONNECTION
Locate the brass brake line coupling which is mounted to the end
of the toungue brake hose. Remove the brass plug from the tting
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0004186
03/24/2010
Page 3
Diagram B
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0004186
03/24/2010
Page 4
Loading...