Size:
9.62 Mb
Download

DIGITAL MULTIMEDIA PROJECTOR

OPERATION MANUAL

MODEL

PG-M25X

Introduction

and Setup

Connections

Operation Basic

to Easy

Functions Use

Appendix

 

 

 

 

PG-M25X#E#Hyo1.p65

1

02.4.29, 3:01 PM

IMPORTANT

For your assistance in reporting the loss or theft of your Projector, please record the Serial Number located on the bottom of the projector and retain this information. Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of “Supplied accessories” on page 20.

Model No.: PG-M25X

Serial No.:

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/ EEC.

Dieses Gerät entspricht den Anforderungen der EG-Richtlinien89/336/EWG und 73/23/EWG mit Änderung 93/ 68/EWG.

Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE.

Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/EEG.

Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillæg nr. 93/68/EEC.

Quest’ apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC, come emendata dalla direttiva 93/68/EEC.

Η εγκατάσταση αυτή ανταπ κρίνεται στις απαιτήσεις των δηγιών της Ευρωπαϊκής Ενωσης 89/336/ Ε Κ και 73/23/Ε Κ, #πως ι καν νισµ ί αυτ ί συµπληρώθηκαν απ# την δηγία 93/68/Ε Κ.

Este equipamento obedece às exigências das directivas 89/336/CEE e 73/23/CEE, na sua versão corrigida pela directiva 93/68/CEE.

Este aparato satisface las exigencias de las Directivas 89/336/CEE y 73/23/CEE, modificadas por medio de la 93/68/CEE.

Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/EEC och 73/23/EEC så som kompletteras av 93/68/ EEC.

Dette produktet oppfyller betingelsene i direktivene 89/336/EEC og 73/23/EEC i endringen 93/68/EEC.

Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 93/68/EEC.

GyroRemote

This equipment complies with the requirements of Directive 1999/5/EC.

GyroRemote-Fernbedienung

Dieses Gerät entspricht den Anforderungen der EU-Richtlinie1999/5/EG.

GyroRemote

Cet appareil est conforme aux exigences de la directive 1999/5/CE.

GyroRemote

Dit apparaat voldoet aan de eisen van de richtlijn 1999/5/EG.

GyroFjernbetjening

Dette udstyr overholder kravene i direktiv 1999/5/EF.

GyroRemote

Quest’ apparecchio è conforme ai requisiti delle direttiva 1999/5/CE.

√ıТФЫНФ ИН¸ TБОВ˜ВИТИЫЩfiТИФ

« ÛıÛÍÂıfi ·ıÙfi ÂÌ·ÒÏÔÌflÊÂÙ·È Ï ÙÈÚ · ·ÈÙfiÛÂÈÚ ÙÁÚ Ô‰Á„fl·Ú 1999/5/EK.

GyroRemoto

Este equipamento obedece às exigências da directiva 1999/5/CE.

GyroRemote

Este aparato satisface las exigencias de las Directiva 1999/5/CE.

Gyrofjärrkontroll

Denna utrustning uppfyller kraven enligt direktiv 1999/5/EC.

GyroRemote

Dette produktet oppfyller kravene i direktiv 1999/5/EC.

Gyro-kauko-ohjain

Tämä laite täyttää direktiivin 1999/5/EY vaatimukset.

PG-M25X#E#Hyo2.p65

1

02.4.29, 3:03 PM

PG-M25X#Ep00.p65

2

02.4.29, 3:05 PM

SPECIAL NOTE FOR USERS IN THE U.K.

The mains lead of this product is fitted with a non-rewireable(moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse markedorand of the same rating as above, which is also indicated on the pin face of the plug, must be used.

Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.

In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type.

DANGER:

The fuse from the cut-offplug should be removed and thecut-offplug destroyed immediately and disposed of in a safe manner.

Under no circumstances should the cut-offplug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur.

To fit an appropriate plug to the mains lead, follow the instructions below:

IMPORTANT:

The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.

The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pinplug.

Before replacing the plug cover make sure that:

If the new fitted plug contains a fuse, its value is the same as that removed from the cut-offplug.

The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.

IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

The supplied CD-ROMcontains operation instructions in English, German, French, Swedish, Spanish, Italian, Dutch, Portuguese, Chinese and Korean. Carefully read through the operation instructions before operating the projector.

Die mitgelieferte CD-ROMenthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Schwedisch, Spanisch, Italienisch, Niederländisch, Portugiesisch, Chinese, und Koreanisch. Bitte lesen Sie die Bedienungsanleitung vor der Verwendung des Projektors sorgfältig durch.

Le CD-ROMfourni contient les instructions de fonctionnement en anglais, allemand, français, suédois, espagnol, italien, néerlandais, portugais, chinois et coréen. Veuillez lire attentivement ces instructions avant de faire fonctionner le projecteur.

Den medföljande CD-ROM-skivaninnehåller bruksanvisningar på engelska, tyska, franska, svenska, spanska, italienska, holländska, portugisiska, kinesiska och koreanska. Läs noga igenom bruksanvisningen innan projektorn tas i bruk.

El CD-ROMsuministrado contiene instrucciones de operación en inglés, alemán, francés, sueco, español, italiano, holandés, portugués, chino y coreano. Lea cuidadosamente las instrucciones de operación antes de utilizar el proyector.

Il CD-ROMin dotazione contiene istruzioni per l’uso in inglese, tedesco, francese, svedese, spagnolo, italiano, olandese, portoghese, cinese e coreano. Leggere attentamente le istruzioni per l’uso prima di usare il proiettore.

De meegeleverde CD-ROMbevat handleidingen in het Engels, Duits, Frans, Zweeds, Spaans, Italiaans, Nederlands, Portugees, Chinees en Koreaans. Lees de handleiding zorgvuldig door voor u de projector in gebruik neemt.

O CD-ROMfornecido contém instruções de operação em Inglês, Alemão, Francês, Sueco, Espanhol, Italiano, Holandês, Português, Chinês e Coreano. Leia cuidadosamente todas as instruções de operação antes de operar o projetor.

 

 

 

 

 

 

 

 

 

 

PG-M25X#Ep00.p65

1

02.4.29, 3:05 PM

U.S.A. ONLY
U.S.A. ONLY
U.S.A. ONLY
U.S.A. ONLY

Before using the projector, please read this operation manual carefully.

Introduction

ENGLISH

 

 

There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector.

1.WARRANTY

This is to assure that you immediately receive the full benefit of the parts, service and labor warranty applicable to your purchase.

2.CONSUMER PRODUCT SAFETY ACT

To ensure that you will promptly receive any safety notification of inspection, modification, or recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE.

WARNING: High brightness light source. Do not stare into the beam of light, or view directly. Be especially careful that children do not stare directly into the beam of light.

WARNING: Toreducetheriskoffireorelectricshock,donotexposethisproducttorainormoisture.

See bottom of actual set.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT REMOVE SCREWS

EXCEPT SPECIFIED USER

SERVICE SCREWS.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER.

NO USER-SERVICEABLEPARTS EXCEPT LAMP UNIT.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk or electric shock to persons.

The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.

INFORMATION

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the operation manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

The enclosed computer cable must be used with the device. The cable is provided to ensure that the device complies with FCC Class A verification.

WARNING:

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

-1

Introduction

PG-M25X#E#p01_07.p65

1

02.4.29, 3:06 PM

“Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device”.

CANADA ONLY

For GyroRemote unit (RRMCG1631CESA)

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation. This device operates in the frequency band of 49.82 to 49.90 MHz with RF output power of less than 30 MicroWatts EIRP (Effective Isotropic Radiated Power).

Caution

Any changes made to this device not expressly approved by the manufacturer could void the users right to

operate this device.

U.S.A. ONLY

WARNING:

The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off. During normal operation, when turning the power off always use the POWER button on the projector or on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord.

DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.

PRODUCT DISPOSAL

This projector utilizes tin-leadsolder, and a pressurized lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or, if you are located in the United States of America, the Electronic Industries Alliance: www.eiae.org .

Caution Concerning the Lamp Replacement

See “Replacing the Lamp” on page 111.

LAMP REPLACEMENT CAUTION

BEFORE REMOVING THE SCREW, DISCONNECT POWER CORD.

HOT SURFACE INSIDE. ALLOW 1 HOUR TO COOL BEFORE REPLACING THE LAMP.

REPLACE WITH SAME SHARP LAMP UNIT TYPE BQC-PGM20X//1ONLY.

UV RADIATION : CAN CAUSE EYE DAMAGE. TURN OFF LAMP BEFORE SERVICING.

MEDIUM PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL HAZARD OF GLASS

PARTICLES IF LAMP HAS RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL.

PRECAUTIONS A OBSERVER LORS

DU REMPLACEMENT DE LA LAMPE.

DEBRANCHER LE CORDON D’ALIMENTATION AVANT DE RETIRER LES VIS.

L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE 1 HEURE

AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE.

NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC-PGM20X//1.

RAYONS ULTRAVIOLETS : PEUVENT ENDOMMAGER LES YEUX.

ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN.

LAMPE A MOYENNE PRESSION : RISQUE D’EXPLOSION. DANGER POTENTIEL

DE PARTICULES DE VERRE EN CAS D’ECLATEMENT DE LA LAMPE

A MANIPULER AVEC PRECAUTION, SE REPORTER AU MODE D’EMPLOI.

-2

PG-M25X#E#p01_07.p65

2

02.4.29, 3:06 PM

Outstanding Features

1.

Image Quality

Introduction

 

 

Superior image quality with Fujinon™ optical lens system.

 

 

Newly developed DDR (Double Data Rate) chip eliminates Color Break-

 

 

ing phenomena common with previous generation DLP™ projectors.

 

 

Newly developed 12° DMD™ chip provides significantly improved opti-

 

 

cal efficiency and excellent contrast ratio.

 

2. Light, Compact, and Unique Slim Design

 

 

A new optical engine creates a unique slim design and compact size

 

 

(4.2 liters, 5.8 lbs. (2.6 kg)).

 

3.

Superior PC Compatibility

 

 

Supports a refresh rate (vertical frequency) of up to 200 Hz and a wide

 

 

range of synchronous signals.

 

 

Using Advanced Compression Technology, computer screens of UXGA

 

 

(1,600 # 1,200) resolution can be displayed with minimal distortion.

 

4. Advanced Computer & Video lntegrated Composer Technology

 

 

Realizes vivid images using the latest high image quality circuitry.

 

 

New I/P conversion algorithm enhances the performance of the motion detect I/P

 

 

 

conversion.

 

 

Extensive improvements on the jagged edges or slanted lines in moving images.

 

 

Contrast Control Dynamic Gamma

 

 

Improved contrast and natural color gradation by minimizing hue change.

 

 

Color Management Function

 

 

Supports sRGB (color management).

 

 

Noise Reduction

 

 

Allows for a clear image even with noisy source signals.

 

 

New Edge Up-Scaling

 

Reduces jaggies and flickering when up-scalingedges of slanted lines, enabling sharper quality images.

-3

PG-M25X#E#p01_07.p65

3

02.4.29, 3:06 PM

6. Built-inPCMCIA card slot (TypeII)

Wireless presentations using a wireless LAN PC card.

Supports the global wireless LAN standard, IEEE802.11b.

This wireless LAN PC card complies with IEEE802.11b wireless LAN standards.

Computers with built-inwireless LAN PC cards that support this standard allow for wireless connections.

Note

A wireless connection with all IEEE802.11b compliant computers is not guaranteed.

The projector or computer can be placed anywhere you want!

You can expand your presentation efficiency through a wireless connection, for example, by projecting computer images through a projector installed on the ceiling.

You can display images from a computer selected from a group of computers.

Effective presentations can now be realized without having to reconnect data cables all the time.

PC-lesspresentations using a memory card.

Just by inserting an IC media (a memory card) such as CompactFlash in the projecter using a PCMCIA card (Type II) adapter, you can make presentations or auto demonstrations without using a computer.

Note

For wireless presentations using the wireless LAN PC card, as well as PC-lesspresentations using memory cards, please refer to the Wireless Reality operation manual.

7.GyroRemote

Using the Gyro function, you can realize more effective and advanced presentations.

The crisp screen pointer gives your presentations a more intuitive touch.

Using the multi-directionalwireless remote control, your transmission range can be expanded, as well as perform the same operations as a USB mouse on a computer.

-4

PG-M25X#E#p01_07.p65

4

02.4.29, 3:06 PM

Contents

Introduction

 

Outstanding Features .........................................

3

Contents ...............................................................

5

IMPORTANT SAFEGUARDS ...............................

8

How to Access the PDF Operation Manuals

 

(Windows, Macintosh) .................................

13

Part Names ........................................................

14

Projector (Front and Top View) ................................

14

Projector (Side View) ..............................................

15

GyroRemote .............................................................

16

Inserting the Batteries .............................................

17

Replacing the Batteries ...........................................

17

The GyroRemote ...............................................

18

GyroRemote Features ..............................................

18

Calibrating the GyroRemote ...................................

19

Accessories .......................................................

20

Setup and Connections

 

Setup ..................................................................

22

Using the Adjustment Feet .....................................

22

Setting up the Screen ..............................................

23

Screen Size and Projection Distance ......................

24

Projecting a Reversed/Inverted Image ...................

25

Connecting the Projector to Other Devices ....

26

Before Connecting ..................................................

26

Connecting the Power Cord ...................................

26

Connecting the Projector to a Computer .........

27

Connecting to Video Equipment ......................

29

Installing / Removing the PC Card ...................

31

Connecting to a Monitor ..................................

32

Basic Operation

 

Image Projection ...............................................

34

Basic Procedure ......................................................

34

Selecting the On-screenDisplay Language ...........

37

Adjusting the Lens ..................................................

37

Correcting the Trapezoidal Distortion

 

(Keystone Correction) .................................

38

Correcting the Trapezoidal Distortion ......................

38

Using the GyroRemote .....................................

40

Before Using the GyroRemote .................................

40

Gesture Operation

 

Introduction

 

 

(Selecting OSD Menus, Operating Presentation

 

 

Tools) ....................................................................

40

 

Function Assign .......................................................

41

 

GyroRemote Channel Setting ..................................

42

 

Registering the GyroRemote in the Projector ..........

42

 

Registering Multiple GyroRemotes in One Projector43

 

Using the Presentation Tools ...........................

44

 

Using the Pointer ....................................................

44

 

Using the Stamp Function .......................................

45

 

Using the Line Function ...........................................

46

 

Using the Wireless Presentation Function

 

 

of the GyroRemote ......................................

47

 

Connecting the

 

 

Computer and the Projector .................................

47

 

Using as a Wireless Mouse .....................................

48

 

Connecting the GyroRemote with a Cable .............

48

 

Turning Off the GyroRemote ...................................

49

 

Using the Menu Screen ....................................

50

 

Menu Selections on the Projector (Adjustments) ....

50

 

Menu Selections on the projector (Settings) ...........

52

 

Using the GyroRemote to Navigate the On-screen

 

 

Menu (Adjustments) .............................................

54

 

Using the GyroRemote to Navigate the On-screen

 

 

Menu (Settings) ....................................................

55

 

Menu Bar Items .................................................

56

 

Adjusting the Picture ........................................

59

 

Adjusting Image Preferences ..................................

59

 

Selecting the Signal Type .......................................

59

 

Progressive Mode ....................................................

60

 

Adjusting Computer Images ............................

61

 

When Auto Sync is OFF ...........................................

61

 

Saving Adjustment Settings .....................................

61

 

Selecting Adjustment Settings ................................

62

 

Special Mode Settings ............................................

62

 

Checking the Input Signal .......................................

63

 

Auto Sync Adjustment .............................................

63

 

Auto Sync Display Function ...................................

64

 

Easy to Use Functions

Using the Network .............................................

66

Before setting the network .......................................

66

Using a Wireless LAN PC Card ........................

68

Installing a Wireless LAN PC Card ..........................

68

Ejecting the Card ....................................................

68

-5

PG-M25X#E#p01_07.p65

5

02.4.29, 3:06 PM

Network Settings ...............................................

69

Setting Up a Projector Name ...................................

69

Setting the IP Address .............................................

70

Setting the Wireless Channel ...................................

71

Setting the SSID ......................................................

72

Setting the DHCP Server .........................................

73

Resetting the Network Settings ..............................

74

Wireless LAN PC card: Troubleshooting .........

74

Using a Memory Card .......................................

75

Displaying of the Contents in the Card as an Index 75

Ejecting the Card ....................................................

75

Setting the Thumbnail Display .................................

76

Setting Lists .............................................................

77

Memory Card Settings ......................................

78

Setting Files .............................................................

78

Setting the Display Order of Files ............................

78

Setting the Display Format of the Index Mode ........

79

Using Autorun .........................................................

79

Setting the Display Interval for Image Files .............

80

Displaying a Still Image ....................................

81

Storing an Image in Still Image Format ...................

81

Selecting the Picture Display Mode ................

82

Switching the Picture Display Using Different Input

 

Signals ..................................................................

82

Enlarging a Specific Portion of an Image .......

84

Displaying an Enlarged Portion of an Image ...........

84

Gamma Correction Function ............................

86

Adjusting Gamma Correction ..................................

86

Selecting the Power Save Mode ......................

87

Setting the Power Save Mode .................................

87

Automatic Power Shutoff Function ..........................

87

Displaying Dual Pictures (Pict in Pict) ............

88

Displaying the Inset Picture .....................................

88

Setting On-screenDisplay ...............................

89

Turning Off the On-screenDisplay ..........................

89

Activating the sRGB Color

 

Management Function ................................

90

Setting the Color Management Function (sRGB) ....

90

Auto Search Function .......................................

91

Using Auto Search ..................................................

91

Video Digital Noise Reduction (DNR) System 92

Reducing Image Noise ............................................

92

Setting the Video Signal ...................................

93

Selecting a Startup Image ................................

93

Selecting a Startup Image .......................................

93

Saving Projected Images ..................................

94

-6

 

Capturing the Image ..............................................

94

Deleting the Captured Image ..................................

94

Setting a Background Image ............................

95

Selecting a Background Image ..............................

95

Using an RGB Monitor Loop-outAdaptor ......

96

Using an RGB Monitor Loop-outAdaptor ...............

96

Displaying the Lamp Usage Time ....................

96

Confirming the Lamp Usage Time ..........................

96

Displaying the Break Timer ..............................

97

Displaying and Setting the Break Timer .................

97

To cancel the break time .........................................

97

Reversing/Inverting Projected Images ............

98

Setting the Projection Mode ...................................

98

Locking the Operation Buttons

 

on the Projector ...........................................

99

Setting up the Keylock ............................................

99

Canceling the Keylock Setting ................................

99

Setting up a Password ....................................

100

Entering the Password ...........................................

100

Changing the Password .......................................

101

If You Forget Your Password .................................

101

Setting the Anti-Theft......................................

102

Entering the Keycode ............................................

102

Changing the Keycode .........................................

104

Initializing the Settings ...................................

105

Returning to the Default Settings ..........................

105

Displaying the Adjustment Settings ..............

106

Overview of ALL Menu Settings ............................

106

Appendix

 

Carrying the Projector ....................................

108

How to Use the Carrying Case ..............................

108

Maintenance ....................................................

109

Maintenance Indicators ..................................

110

Regarding the Lamp .......................................

111

Lamp ....................................................................

111

Caution Concerning the Lamp ..............................

111

Replacing the Lamp ..............................................

111

Removing and Installing the Lamp Unit ...............

112

Resetting the Lamp Timer .....................................

113

Connecting Pin Assignments ........................

114

Computer Compatibility Chart .......................

115

Troubleshooting ..............................................

116

For SHARP Assistance ...................................

118

Specifications ..................................................

119

PG-M25X#E#p01_07.p65

6

02.4.29, 3:06 PM