MODEL
LC-60LE635E LC-60LE635RU LC-60LE636E LC-60LE636S
OPERATION MANUAL
LCD COLOUR TELEVISION
CE Statement:
Hereby, SHARP Electronics (Europe) GmbH declares that the wireless LAN USB adapter (WN8522D 7-JU) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at: http://www.sharp.de/doc/ WN8522D_7.pdf.
NOTE
The wireless LAN USB adapter is designed for indoor use only.
ASA |
Introduction |
[ ENGLISH ] |
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read Important safety precautions carefully before using this product.
Contents |
|
Introduction............................................................. |
1 |
Dear SHARP customer....................................... |
1 |
Contents............................................................. |
1 |
Important safety precautions ............................. |
2 |
Supplied accessories ......................................... |
4 |
Optional accessories.......................................... |
4 |
Preparation ............................................................. |
5 |
Attaching the stand unit ..................................... |
5 |
Using the remote control unit............................. |
6 |
Part names and functions...................................... |
7 |
TV (front/side view)............................................. |
7 |
TV (rear view)...................................................... |
7 |
Remote control unit............................................ |
8 |
Quick guide ............................................................. |
9 |
Operation overview ............................................ |
9 |
Inserting the CA card into the CI module......... |
11 |
Using the Menu screen .................................... |
12 |
Initial auto installation.......................................... |
14 |
Initial auto installation....................................... |
14 |
Watching TV .......................................................... |
19 |
Daily operation ................................................. |
19 |
EPG .................................................................. |
21 |
Teletext ............................................................. |
23 |
Connecting external devices............................... |
24 |
Introduction to connections ............................. |
24 |
Video connections............................................ |
25 |
Audio connections ........................................... |
27 |
AQUOS LINK ......................................................... |
28 |
Controlling HDMI devices using AQUOS LINK ... |
28 |
AQUOS LINK connection................................. |
29 |
AQUOS LINK setup.......................................... |
30 |
Operating an AQUOS LINK device .................. |
30 |
Basic adjustment.................................................. |
32 |
Picture settings................................................. |
32 |
Audio settings .................................................. |
34 |
Power save settings ......................................... |
35 |
View settings .................................................... |
36 |
TV start-up time setting.................................... |
39 |
Individual setting - PIN ..................................... |
39 |
Individual setting - Time................................... |
39 |
Individual setting - Language........................... |
40 |
Useful viewing functions...................................... |
41 |
Optional features settings ................................ |
41 |
Additional features ........................................... |
45 |
Other useful features ........................................... |
46 |
Using a USB device ......................................... |
46 |
Time shift.......................................................... |
47 |
USB media/Home network .............................. |
50 |
USB device compatibility ................................. |
53 |
Home network server compatibility ................. |
53 |
Selecting the picture size for video mode........ |
53 |
Connecting a PC................................................... |
54 |
Connecting a PC .............................................. |
54 |
Displaying a PC image on the TV..................... |
54 |
PC control of the TV......................................... |
57 |
Network setup ...................................................... |
59 |
Connecting to the network............................... |
59 |
Net TV .................................................................... |
61 |
What is Net TV?................................................ |
61 |
Operations in Net TV........................................ |
61 |
Disclaimers and software licences for Net TV ... |
63 |
Appendix ............................................................... |
64 |
Troubleshooting................................................ |
64 |
Updating your TV via DVB-T/T2*...................... |
65 |
Getting update information .............................. |
65 |
Information on the software licence for this |
|
product........................................................... |
66 |
Updating your TV via USB/network ................. |
66 |
Trade marks...................................................... |
67 |
Specifications................................................... |
68 |
Specifications (Wireless LAN USB adapter)..... |
69 |
Environmental specifications ........................... |
70 |
Mounting the TV on a wall................................ |
70 |
Dimensional drawings ...................................... |
72 |
EU Energy Label for Televisions ....................... |
73 |
NOTE
•The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations.
1
Introduction
•Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
•Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the cabinet of the TV.
• Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement.
•Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric
shock.
•Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious
personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
•When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart.
•Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.
•The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
•Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products
(including amplifiers).
•To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
•Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
•Do not display a still picture for a long time, as this could cause an afterimage to remain.
•There is power consumption always if main plug is connected.
•Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue, green or red. This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by putting pressure onto the display. Be sure to always carry the TV by two people holding it with two hands—one hand on each side of the TV.
Caring for the cabinet
•Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.
•Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause cracking.
•Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
•If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in neutral detergent diluted with water and thoroughly wrung out, and then wipe with a soft dry cloth.
•Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint to peel off.
•Do not apply insecticides or other volatile liquids. Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time. Plasticizers inside the plastic may cause the cabinet to deform and cause the paint to peel off.
2
Introduction
Caring for the front panel
•Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel.
•Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
•Use a soft damp cloth to gently wipe the front panel when it is really dirty (It may scratch the surface of the front panel when wiped strongly).
•If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it.
WARNING
To prevent the spread of fire, keep candles or other open flames away from this product at all times.
3
Introduction
Remote control unit ( x 1)
Pages 6 and 8
Stand unit ( x 1)
LR03 (“AAA” size alkaline) battery ( x 2)
Page 6
Wireless LAN USB adapter (WN8522D 7-JU) ( x 1)
Page 5 |
|
Page 60 |
Initial setup guide |
USB memory |
Important safety |
(printed document) |
(operation manual) |
precautions |
|
|
(printed document) |
The listed optional accessories are available for this LCD colour TV. Please purchase them at your nearest shop.
•Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability.
No. |
Part name |
Part |
Notes |
|
number |
||||
|
|
|
||
1 |
Wall mount bracket |
AN-52AG4 |
The centre of the TV screen is 18 mm |
|
below the mark “e” on the wall bracket. |
4
•Before attaching (or detaching) the stand, unplug the AC cord.
•Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
CAUTION
•Attach the stand in the correct direction.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1Confirm that there are twelve screws (eight long screws and four short screws) supplied with the stand unit.
21 Set the supporting post for the stand unit onto the polystyrene foam.
2Attach the stand base to the supporting post.
3Insert and tighten the eight screws into the eight holes on the bottom of the stand base.
•Hold the stand unit securely with one hand, and then tighten the screws.
Stand base |
|
|
|
|
|
|
Long screws |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3Insert the stand into the openings on the bottom of the TV (hold the stand so it will not drop from the edge of the base area).
•Make sure that the stand is firmly inserted into the TV. Improper installation may result in tilting of the TV set.
Soft cushion
4Insert and tighten the four screws into the four holes on the rear of the TV.
Short screws
NOTE
•To detach the stand unit, perform the steps in reverse order.
•A screwdriver is not supplied with this product.
•In the installation procedure, be careful not to catch your fingers between the TV set and the floor.
TV front
Supporting post
5
Preparation
Inserting the batteries
Before using the TV for the first time, insert the two supplied LR03 (“AAA” size alkaline) batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new LR03 (“AAA” size alkaline) batteries.
1 Open the battery cover.
2 Insert the two supplied LR03 (“AAA” size alkaline) batteries.
• Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.
3 Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
•Do not mix batteries of different types. Different types of batteries have different characteristics.
•Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.
•Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
•The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
•If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
•When replacing the batteries, use alkaline batteries instead of zinc-carbon ones.
Note on disposing batteries
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial businesses.
Angle of the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit and sensor may prevent proper operation.
5 m
Remote control sensor
Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote control sensor of the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or the TV, or operate the remote control unit closer to the remote control sensor.
6
TV (front/side view) |
|
TV (rear view) — continued |
||
|
|
|
|
|
|
|
|
|
|
Illumination LED
OPC sensor (Page 32)
Remote control sensor (Page 6)
USB 3 ( WIRELESS LAN) port |
HDMI 2/PC AUDIO (L/R) |
USB 2 (HDD) port |
jack*1 |
|
ETHERNET (10/100) terminal |
|
|
|
|
|
DIGITAL AUDIO OUTPUT |
|
|
|
|
|
terminal |
|
|
|
|
|
|
|
|
Satellite antenna terminal |
|
|
|
Antenna terminal |
||
|
|
|||||
(635 series only) |
|
|
|
|
IThe HDMI 2 and PC terminals can both use the same audio input terminal (HDMI 2/PC AUDIO (L/R)). However, the proper item must be selected in the “Audio select” menu (refer to page 42 for details).
SD CARD
(VIDEO STORE) slot
OUTPUT (Headphones/
AUDIO (L/R)) terminal*2
USB 1 port
HDMI 1 (HDMI/ARC)
terminal
HDMI 2 (HDMI) terminal
|
|
|
|
|
|
|
|
RS-232C terminal |
|
HDMI 3 (HDMI) terminal |
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
HDMI 4 (HDMI) terminal |
||
|
|
|
|
|
|
|
|
PC terminal |
|
||
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
EXT 1 |
(RGB) terminal |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
EXT 2 |
(VIDEO/AUDIO |
|
C.I. (COMMON |
|
|
|
|
|
|
|
|
(L/R)) terminal |
|
||
|
|
|
|
|
|
|
|
EXT 3 |
(Component/ |
|
INTERFACE) slot |
|
|
|
|
|
|
|
|
AUDIO (L/R)) terminal |
|
|
JWhen the headphone is connected to the OUTPUT terminal, the audio can be output from the speakers (Page 43).
WARNING
•Excessive sound pressure from earphones and headphones can cause hearing loss.
•Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
Important information:
Satellite services are only available for the 635 model series.
7
Part names and functions
|
15 |
1 |
16 |
2 |
|
3 |
|
4 |
|
5 |
|
6 |
|
7 |
17 |
8 |
18 |
9 |
19 |
10 |
20 |
11 |
|
12 |
21 |
13 |
|
14 |
22 |
|
23 |
|
24 |
1>a(Standby/On) (Page 19)
2ATV
Access conventional analogue TV mode.
DTV
Access digital TV mode.
SAT
Access satellite mode.
RADIO
DTV/SAT: Switch between radio and data mode.
•When only data broadcasting (no radio broadcasting) is transmitted by DVB, the radio broadcasting will be skipped.
3AQUOS LINK buttons (Pages 28 and 30)
4CONTROL (Pages 47, 48, 52 and 61)
Display a panel to operate some functions on the screen.
NET: “NET MENU” screen on/off.
5TIME SHIFT (READY/!/F/$)
(Pages 47 and 48)
Temporarily record a programme you are watching.
6Numeric buttons 0_9
Set the channel. Enter desired numbers. Set the page in teletext mode.
•When the five Nordic countries (Sweden, Norway, Finland, Denmark or Iceland) are selected in the country setting from initial auto installation (Page 14), DTV services are four digits. When another country is selected, DTV services are three digits.
7A(Flashback)
Return to the previously selected channel or external input.
87(Sound mode) (Page 20)
Select a sound multiplex mode.
f(Wide mode) (Pages 41, 53 and 54)
Select a wide mode.
9e(Mute)
TV sound on/off.
0i+/-(Volume)
Increase/decrease TV volume.
Q@
“Menu” screen on/off.
WNone
This button does not work on this model.
Ea/b/c/d(Cursor)
Select a desired item.
;
Execute a command.
ATV/DTV/SAT: Display “CH list” when no other “Menu” screen is running.
R>
ATV/DTV/SAT: Exit the “Menu” screen. NET: Return to the start page.
TNET
Access Net TV.
Yp(Display information) (Page 20)
Display the station information (channel number, signal, etc.) on the screen.
P. INFO
Display programme information transmitted through digital video broadcasting (DTV/SAT only).
Ub(INPUT) (Page 19)
Select an input source.
I#(Page 32)
Select audio/video settings.
ECO(Standard/Advanced/Off)(Page35)
Select “Energy save” setting.
Om(Teletext) (Page 23)
ATV: Display analogue teletext. DTV/SAT: Select MHEG-5 or teletext for DTV/SAT.
P:r/s
ATV/DTV/SAT: Select the TV channel. NET: Scrolls pages up/down.
A EPG (Pages 21_23)
DTV/SAT: Display the EPG screen.
S6(Return)
ATV/DTV/SAT: Return to the previous “Menu” screen.
NET: Return to the previous page (This may not function for some services).
DButtons for useful operations
[(Subtitle) (Pages 23 and 40)
Switch subtitle languages on/off.
k(Reveal hidden teletext) (Page 23) 1(Subpage) (Page 23)
3(Freeze/Hold) (Page 23)
Freeze a moving image on the screen. Teletext: Stop updating teletext pages automatically or release the hold mode.
FR/G/Y/B (Colour) buttons
The coloured buttons are correspondingly used to select the coloured items on the screen (e.g., EPG, MHEG-5, teletext).
Important information:
Satellite services are only available for the 635 model series.
8
Follow the steps below one by one when using the TV. Some steps may not be necessary depending on your TV installation and connection.
1. Preparation - Connecting the TV
p
q
•Place the TV close to the AC outlet, and keep the power plug within reach.
•Product shape varies in some countries.
n
o
Plug the standard DIN45325 plug (IEC 169-2) 75 qcoaxial cable.
Connect the satellite antenna cable.
Insert a CA card into the CI slot to watch scrambled broadcasts (Page 11).
Plug in the AC cord.
*Important information:
Satellite services are only available for the 635 model series.
2. Preparation - Setting the TV
Press <on the TV (Page 19).
Run the initial auto installation (Page 14).
w Language setting
w Home/Store setting
w Country setting
w PIN setting
w Channel search setting
•Digital search
−Terrestrial
−Cable
•Analogue search
•Satellite search
Start searching channels
Congratulations!
Now you can watch TV.
• If necessary, adjust the antenna to attain maximum signal reception (Page 18).
9
Quick guide
3. Watch TV - Daily operation
1 Turn on/off the TV
(Page 19)
• You can turn on/off the power using both the remote control and the TV.
2Switch between digital, satellite and analogue broadcast
(Page 19)
3 Change channels
(Page 19)
• You can also select a channel from “Menu” > “CH list”.
4 Select a programme using EPG
(Pages 21_23)
4. Watch TV - Advanced features
1 Use Time shift function
(Pages 47_49)
2 Adjust TV settings
(Pages 32_45)
•Some items cannot be selected depending on signal types, optional settings or connected devices.
Menu
CH list |
|
|
Setup |
|
:Enter |
:Back |
|
|
|
|
|
|
|
|
|
|
|
View setting |
|
|
|
|
|
|
|
|
Auto installation |
||
|
|
|
|
|
|
|
Channel settings |
||
|
|
|
|
|
5. Enjoy additional features
1 Enjoy internet service* with the TV
(Pages 59_63)
* The following service is now available:
• Net TV (Pages 61–62)
2 Connect external devices
Connection overview (Pages 24_29)
•Be sure to turn off the TV and any devices before making any connections.
Switch input sources (Page 19)
3Enjoy photos, music and video stored in USB media/Home network
(Pages 50_53)
4 Display a PC image on the TV screen
(Pages 54_58)
10
Quick guide
In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the CI slot of the TV.
1Carefully insert the CI module in the CI slot with the contact side forward.
2The logo on the CI module must be facing outward from the rear of the TV.
Checking CI module information
Go to “Menu” > “Setup” > “Option” > “CI menu”.
•This menu is only available for digital stations.
•The content of this menu depends on the provider of the CI module.
Module
General information on CI module displays.
Menu
Adjustment parameters of each CA card displays.
Enquiry
You can input numerical values such as passwords here.
NOTE
•It takes a few minutes to certify the licence key when you insert a CA card into the CI+ compatible CI module for the first time. This process may fail when there is no antenna input or you have never run “Auto installation”.
•The CI+ compatible CI module sometimes upgrades its firmware. You may not receive any TV images before upgrading. You can only use the power button during upgrading.
•Copy protected content may not be output or may be output with a copy control signal. The protect icon* is
displayed when P.INFO is pressed while watching copy protected contents.
* Protect icon: X
•If the TV displays an update confirmation message for the CA card while receiving CI+ compatible broadcasts, follow the screen prompts.
•Make sure that the CI module is properly inserted.
11
Quick guide
You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “Menu”. The “Menu” enables various settings and adjustments.
This product is embedded with LC Font technology, which was developed
LCFONT by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens.
Basic operation
1Display the Menu screen
Press @and the “Menu” screen displays.
2Select an item
The “Menu” is classified by setting categories for improving TV viewing.
See the right column for details on the operations in the “Menu” screen.
3Exit the Menu screen
The operation will exit the “Menu” screen if you press >before it is completed.
NOTE
•“Menu” options differ in the selected input modes, but the operating procedures are the same.
•Items with 4cannot be selected for various reasons.
•Some items cannot be selected depending on signal types, optional settings or connected devices.
About the guide display
The guide display below the menu bar shows operations for the OSD.
•The bar above is an operational guide for the remote control unit. The bar will change in accordance with each menu setting screen.
CH list |
|
Setup |
:Select |
:Enter |
:Back |
Tips:
Selecting in the Menu
Press c/dto select the desired menu, and then press ;. Press 6to return to the previous menu category.
Press c/dto select the desired submenu, and then press ;.
Press a/bto select the item you want to select/adjust, and then press ;.
Menu
CH list |
Setup |
:Enter |
:Back |
Picture
AV mode
OPC
[Off]
Backlight
Contrast
Regarding the instructions in the manual
Selecting options
Press a/bor c/d to configure the control for improving TV viewing, and then press ;.
EXAMPLE
Backlight
|
|
|
|
|
|
Yes |
|
No |
|
|
|
|
|
|
NOTE
•Refer to the guide display below the menu bar to see when to press the ;button.
In this manual, the following expression is often used in order to simplify instructions.
• Go to “Menu” > “Setup” > ...
This indicates how to navigate through the menu screen using the a/b/ c/dand ;buttons.
12
Quick guide
Using Software keyboard
Use the software keyboard when you need to input text.
|
6 |
7 |
|
|
8 |
|
|
1 |
|
Char.Set |
|
|
|
|
|
2 |
|
Caps |
|
|
|
|
9 |
3 |
|
Done |
|
|
|
Clear |
10 |
4 |
Cancel |
|
|
SP |
Delete |
11 |
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
5 |
|
Cursor Left |
Caps |
Char.Set |
|
Cursor Right |
|
1 |
Char. Set |
6 |
Input cursor |
|
Changes character |
|
Press c/dto move the |
|
set into the alphabet, |
|
cursor when highlighted. |
|
numbers, symbols, etc. |
7 |
Input field |
2 |
Caps |
|
The text you enter is |
|
Changes characters to |
|
displayed as you type |
|
capital/lower case. |
|
it in. |
3 |
Done |
8 |
Character |
|
Confirm the entry. |
|
Input characters by |
4 |
Cancel |
|
using these buttons. |
|
|
||
|
Abort input and close |
9 |
? |
|
the software keyboard. |
|
Put a line break. |
5R/G/Y/B (Colour)
buttons
Selects the coloured items on the screen.
0Clear
Erases the character string.
•When the cursor is somewhere in a line: the character string to the right of the cursor will be erased.
•When the cursor is at the right end of a line: the entire line will be erased.
QDelete
If the cursor is at the right end of a line, this erases text one character at a time.
•You can also delete text by pressing 6 on the remote control unit.
13
When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another.
Confirm the following before turning on
the power
E Is the antenna cable connected? E Is the AC cord plugged in?
Important information:
Satellite services are only available for the 635 model series.
1Press <on the TV.
• The initial auto installation wizard appears.
2Setting the OSD language.
Press a/b/c/dto select the desired language, and then press ;.
3Selecting the location of the TV.
|
|
|
|
|
|
HOME |
|
STORE |
|
|
|
|
|
|
Press c/dto select where you will use this TV, and then press ;.
•The confirmation screen pops up only when selecting “STORE”. Press c/dto select “Yes” or “No”.
•HOME: “STANDARD” will be the default value for the “AV mode” setting.
•STORE: “DYNAMIC (Fixed)” will be the default value for the “AV mode” setting. If the “AV mode” is changed, the TV will automatically switch back to “DYNAMIC (Fixed)” when there is no operation using the TV or remote control unit for 30 minutes.
•STORE: A demonstration image will be displayed after initial auto installation is completed. If you have chosen “STORE” by mistake, go to “Setup” > “View setting” > “Reset” > select “HOME” again.
4Setting the country.
Press a/b/c/dto select your country or area, and then press ;.
•This setting screen only appears during the initial auto installation.
NOTE
•Some functions may not display or be selectable depending on the country setting or cable provider selection.
5Setting the PIN.
1Press c/dto select “Yes”, and then press
;.
•When “No” is selected, the PIN code setting is skipped.
2Enter a four-digit number as a PIN using the 0–9 buttons.
3Enter the same four-digit number as in step 2to confirm.
4Press ;.
NOTE
•When “France” is selected in the country setting, the PIN code setting cannot be skipped.
•“0000” cannot be set as the PIN code.
•When the PIN code setting is skipped, the default PIN code (“1234”) will automatically be set.
•To change the PIN setting, refer to Individual setting – PIN (Page 39). To reset the PIN setting (PIN input will no longer be needed), refer to Reset the PIN (Page 64).
6 Starting channel search.
Digital search
Analogue search
Satellite search
Press a/bto select “Digital search”, “Analogue search” or “Satellite search”, and then press ;.
•(635 series only) After performing “Digital search” or “Analogue search”, the screen switches to the “Satellite search” setting. You should then execute “Yes” if you want to search for satellite channels.
•To watch both digital broadcasts and analogue broadcasts, you should perform “Digital search” or “Analogue search” from “Auto installation” under the “Setup” menu (Page 36).
•When you select “Satellite search”, only satellite broadcasts will be searched.
•If you want to search for more broadcasts, execute “Additional search” from the “Programme setup” menu (Pages 36_38).
NOTE
•If you turn off the power on the TV while performing a channel search, the initial auto installation wizard will not appear. The auto installation function allows you to execute the installation again from “Setup” > “View setting” (Page 36).
•The initial auto installation wizard will abort if you leave the TV unattended for 30 minutes before searching for channels.
•When “Italy” or “France” is selected in the country setting, the default age restriction value is set to 18.
14
Initial auto installation
|
|
|
|
|
|
|
|
|
3 Press a/bto select “Search start”, and then |
|
I Set up “Symbol rate 2” if the cable provider uses |
|||
Digital broadcast setting |
|
|
|
|||||||||||
|
|
|
|
press ;. |
|
|
|
several symbol rates. |
||||||
Press c/dto select “Terrestrial” or “Cable”, |
|
4 Press c/dto select “Yes” to start searching |
|
J Details about the “Search method” items are as |
||||||||||
|
|
follows: |
||||||||||||
and then press ;. |
|
|
|
|
|
|
cable broadcasts, and then press ;. |
|
_Channel: Extracts all information from a channel |
|||||
|
|
|
|
|
|
|
|
|
5 The TV searches for, sorts and stores all the |
|
(quick, but needs corresponding TV stations). |
|||
|
|
|
|
|
|
|
|
|
receivable TV stations according to their settings |
|
_Frequency: Checks every frequency in range (slow). |
|||
|
|
Terrestrial |
|
Cable |
|
|
|
|
and the connected antenna. |
|
|
_Quick: All services are searched by one frequency. |
||
|
|
|
|
|
|
|
|
|
• To abort the initial auto installation in progress, |
|
This menu works only when your cable provider |
|||
|
|
|
|
|
|
|
|
|
|
provides the frequency and the network ID (e.g., |
||||
|
|
|
|
|
|
|
|
|
press 6. |
|
|
|
||
ESearching for terrestrial broadcasts |
|
|
|
|
Homing channel). When “Quick” is selected, |
|||||||||
|
|
|
|
|
|
|||||||||
The TV searches for, sorts and stores all the |
|
|
|
|
|
|
“Scrambled stations” is automatically set to “No”, and |
|||||||
|
|
|
|
|
|
“None” for the “Network ID” menu cannot be selected. |
||||||||
receivable TV stations according to their settings |
|
635 series only |
|
|
|
K Set this to register only the specified network ID |
||||||||
and the connected antenna. |
|
|
|
|
After searching for cable channels, the screen |
|
without registering any special services. |
|||||||
• To abort the initial auto installation in progress, |
|
switches to the “Satellite search” setting (Page 16). |
|
L The symbol rates are specified by the cable provider. |
||||||||||
press 6. |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
Analogue broadcast setting |
|||
|
|
|
|
|
|
Menu |
|
Description |
Selectable items |
|
||||
NOTE |
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
Specifies if you |
|
|
|
|||
• A region or service selection screen may display |
|
Scrambled |
|
|
|
The TV searches for, sorts and stores all the |
||||||||
|
|
need to add pay- |
Yes, No |
|
||||||||||
depending on the country settings or cable providers |
|
|
|
|||||||||||
|
stations |
|
TV services. |
|
|
receivable TV stations according to their settings |
||||||||
selections. Follow the screen prompts to make the |
|
|
|
|
|
|||||||||
|
|
|
|
|
|
and the connected antenna. |
||||||||
selections. |
|
|
|
|
|
|
|
|
Specifies how |
Channel, |
|
|||
|
|
|
|
|
|
|
|
|
Search method |
|
you search for |
|
• To abort the initial auto installation in progress, |
|
|
|
|
|
|
|
|
|
|
|
|
channels.*2 |
Frequency, Quick |
|
press 6. |
635 series only |
|
|
|
|
|
|
Start frequency |
|
|
From 47.0_858.0 |
|
|
||
|
|
|
|
|
|
|
|
MHz |
|
|
||||
After searching for terrestrial channels, the screen |
|
|
|
|
|
|
||||||||
|
|
|
Specifies the |
|
|
635 series only |
||||||||
switches to the “Satellite search” setting (Page 16). |
|
Network ID |
|
None, 0_65535 |
|
|||||||||
|
|
network.*3 |
|
After searching for analogue channels, the screen |
||||||||||
ESearching for cable broadcasts |
|
|
|
|
|
|
|
|
|
switches to the “Satellite search” setting (Page 16). |
||||
|
|
|
|
Symbol rate 1/ |
|
Input the value |
|
|
||||||
To change each item to the appropriate settings: |
|
|
received for |
1000_9000 |
|
|
||||||||
|
Symbol rate 2*1 |
|
|
|
||||||||||
1 Press a/bto select |
|
|
|
|
|
|
|
|
CATV.*4 |
|
|
|
||
|
Scrambled stations |
|
[Yes] |
|
|
QAM |
|
|
16, 32, 64, 128, |
|
|
|||
the menu, and then |
|
|
|
|
|
|
modulation 1 |
|
|
256 |
|
|
||
|
Search method |
[Channel] |
|
|
|
|
||||||||
press ;. |
|
|
|
|
|
|
|
|
|
|||||
|
|
|
QAM |
|
|
None, 16, 32, 64, |
|
|
||||||
|
Start frequency |
|
|
|
|
|
|
|
|
|||||
2 Press a/b/c/dor |
|
|
|
|
|
modulation 2 |
|
|
128, 256 |
|
|
|||
|
Network ID |
[None] |
|
|
|
|
||||||||
0_9 to select or input |
|
|
|
|
|
|
|
|
|
|||||
the appropriate item/ |
|
Symbol rate 1 |
|
|
|
|
|
|
|
|
|
|
||
value, and then press |
|
Symbol rate 2 |
|
|
|
|
|
|
|
|
|
|
||
;. |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
QAM modulation 1 |
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
QAM modulation 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reset |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Search start |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15
Initial auto installation |
|
|
|
|
|
Searching for satellite broadcasts |
1When you change the antenna |
3 Press a/b/c/dto select your favorite |
|||
(635 series only) |
|
|
connection setting: |
satellite, and then press ;. |
|
|
|
Press c/dto select “Change setting”, and then |
• You cannot select “Next” unless you set the satellite |
||
|
|
|
broadcast in step 3. |
|
|
Press c/dto select “Yes”, and then press ;. |
press ;. |
|
|
||
|
|
|
• The antenna connection setting screen is displayed. |
|
|
Yes |
No |
|
|
Atlantic Bird 1 |
|
|
Single satellite |
|
|
||
|
|
|
Euro Bird 1 |
|
|
|
|
|
|
|
|
|
|
|
2 satellites on 22kHz switchbox |
|
|
• If you do not perform “Satellite search” setting, |
2 satellites on toneburst switchbox |
|
|
||
select “No”, and then press ;. |
|
|
|
||
|
|
4 Press a/bto select “Next”, and then press |
|||
• The current DVB-S/S2 setting screen is displayed. |
Max. 4 satellites on DiSEqC multiswitch |
||||
Satellite System |
|
Communal satellite system |
;. |
|
|
|
|
|
|
||
Max. 4 satellites on DiSEqC multiswitch |
|
|
|
||
|
LNB Frequency |
|
NOTE |
SAT1 [ASTRA 1] |
|
Satellite |
Low |
High |
|
|
|
• You can select the antenna connection method from the |
Next |
|
|||
|
|
|
|
||
|
|
|
five types. Consult your dealers before using a method |
|
|
|
|
|
other than “Single satellite”. |
|
|
other |
|
|
E“Single satellite” setting |
5 Press c/dto select “Yes (0/22kHz)” or “No” to |
|
Next |
Change setting |
1 Press a/bto select “Single satellite”, and then |
set the LNB frequency, and then press ;. |
||
|
|
||||
|
|
|
press ;. |
|
|
|
|
|
2 Press a/bto select “SAT1 [None]” to display |
Yes (0/22kHz) |
No |
|
|
|
the satellite broadcasts that the TV can receive, |
|
|
• You must first complete “Change setting” before |
and then press ;. |
6 Press a/bto select the item and press c/d |
|||
moving to the “Next” setting. |
|
|
|||
|
|
|
SAT1 [None] |
to adjust 9,000 MHz to 12,000 MHz to the |
|
|
|
|
appropriate value. |
|
|
|
|
|
|
|
|
|
|
|
Next |
EXAMPLE |
|
|
|
|
|
SAT1 low |
|
|
|
|
|
SAT1 high |
|
|
|
|
|
OK |
|
16
Initial auto installation |
|
|
|
|
|
|
|
7 Press a/bto select “OK”, and then press ;. |
2When starting the satellite search |
EChange setting: |
|
||||
|
after setting the scrambled stations: |
1 |
Press c/dto select “Change setting”, and then |
||||
|
Press c/dto select “Next” on the DVB-S/S2 |
|
press ;. |
|
|
||
After completing this setting, the screen |
|
• The setting screen of “Scrambled stations” and |
|||||
setting screen shown in the left column on page |
|
||||||
switches to the DVB-S/S2 setting screen shown |
16, and then press ;. |
|
|
“Symbol rate” is displayed. |
|
||
|
|
|
|
|
|||
in the left column on page 16. |
NOTE |
|
|
|
Scrambled stations |
[No] |
|
NOTE |
|
|
|
|
|||
• When you perform the initial auto installation, “Next” |
|
SAT1-Symbol rate 1 |
|
|
|||
• Follow the instructions on the screen for “2 satellites |
cannot be selected. Completing “Change setting” |
|
SAT1-Symbol rate 2 |
|
|
||
on 22kHz switchbox”, “2 satellites on toneburst |
enables you to select “Next”. |
|
|
SAT2-Symbol rate 1 |
Yes |
No |
|
switchbox”, “Max. 4 satellites on DiSEqC multiswitch” |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
and “Communal satellite system” settings. |
|
|
|
|
|
|
|
• To set multiple satellite channels, go to “Max. 4 satellites |
Scrambled stations: No |
|
|
|
|
|
|
on DiSEqC multiswitch”. |
|
|
|
|
Search start |
|
|
• Follow the procedure below when the supply of power |
Satellite |
Symbol rate 1 |
Symbol rate 2 |
|
|
|
|
is needed for a satellite antenna: |
|
|
|
2 |
Press a/bto select “Scrambled stations”, and |
||
Go to “Menu” > “Setup” > “View setting” > “Channel |
|
|
|
||||
|
|
|
|
then press ;. |
|
|
|
settings” > “Antenna setup-DIGITAL” > “Satellite setup” |
|
|
|
|
|
|
|
|
|
|
|
• Scrambled stations: Specifies if you need to add |
|||
> “Change setting” > “Communal satellite system”. |
other |
|
|
|
|||
|
|
|
pay-TV services. |
|
|||
|
|
|
|
|
|
||
|
Start search |
Change setting |
3 |
Press c/dto select “Yes”, and then press ;. |
|||
|
|
|
|
4 Press a/bto select the symbol rate you want |
|||
|
EStart search: |
|
|
|
to modify, and then press ;. |
|
|
|
|
|
|
• Symbol rate: You need to set each symbol rate of |
|||
|
DVB-S/S2 channel searching. |
|
|
all the satellite broadcasts that the TV can receive |
|||
|
1 Press c/dto select “Start search”, and then |
|
(eight is the maximum number of symbol rates that |
||||
|
|
can be displayed). |
|
||||
|
press ;. |
|
|
|
|
||
|
|
|
5 |
Press c/dto select “Search start”, and then |
|||
|
2 The TV searches for and stores all the receivable |
||||||
|
|
press ;. |
|
|
|||
|
TV stations according to their settings and the |
6 |
|
|
|||
|
The TV searches for and stores all the receivable |
||||||
|
connected antenna. |
|
|
||||
|
|
|
|
TV stations according to their settings and the |
|||
|
• Select “Yes” to sort the search result in alphabetical |
|
|||||
|
order. |
|
|
|
connected antenna. |
|
|
|
• To abort the initial auto installation in progress, |
|
• Select “Yes” to sort the search result in alphabetical |
||||
|
press 6. |
|
|
|
order. |
|
|
|
|
|
|
|
• To abort the initial auto installation in progress, |
||
|
|
|
|
|
press 6. |
|
|
17
Initial auto installation |
|
|
|
|
|
|
||
Checking signal strength and |
EChecking channel strength |
|
5 Position and align the antenna so that the |
|||||
4 Press a/bto select “Channel strength”, and |
maximum possible values for “Signal strength” |
|||||||
channel strength (DVB-T/T2*1/C/S*2/ |
||||||||
and “Quality” are obtained. |
||||||||
S2*2) |
|
|
then press ;. |
|
|
|
NOTE |
|
|
|
• You can input a specified frequency band using the |
||||||
If you install a DVB-T/T2/C/S/S2 antenna for the first |
0_9 numeric buttons. |
|
|
• The values of “Signal strength” and “Quality” indicate |
||||
Channel strength of DVB-T/T2 |
|
|
when to check the appropriate alignment of the |
|||||
time or relocate it, you should adjust the alignment |
|
|
antenna. |
|||||
|
|
|
|
|||||
of the antenna to receive a good reception while |
Supply voltage |
Frequency |
|
MHz |
Supplying power to the antenna |
|||
checking the antenna setup screen. |
|
Signal strength |
|
|||||
I 636 series only |
|
|
Channel strength |
CH No. |
|
|
You must supply power to the antenna in order |
|
J 635 series only |
|
|
|
Signal strength |
|
|
||
|
|
|
|
|
to receive digitally/terrestrially broadcast stations |
|||
1 Go to “Menu” > “Setup” > “View setting” > |
|
|
|
|
||||
|
Current |
|
Max. |
after connecting the antenna cable to the antenna |
||||
“Channel settings” > “Antenna setup-DIGITAL”. |
|
|
||||||
|
Quality |
|
|
terminal on the rear of the TV. |
||||
2 Press a/bto select “Digital setup” or “Satellite |
|
|
|
|||||
|
|
|
|
1 Go to “Menu” > “Setup” > “View setting” > |
||||
setup”, and then press ;. |
|
|
Current |
|
Max. |
|||
|
|
|
“Channel settings” > “Antenna setup-DIGITAL” > |
|||||
EChecking signal strength |
|
|
|
|
|
|||
|
Channel strength of DVB-C |
|
|
“Supply voltage”. |
||||
3 Press a/bto select “Signal strength”, and then |
|
|
2 Press c/dto select “On”, and then press ;. |
|||||
|
|
|
|
|||||
press ;. |
|
|
Supply voltage |
Frequency |
|
MHz |
|
|
Signal strength for DVB-T/T2/C |
|
Signal strength |
|
|
||||
|
Symbol rate |
|
|
|
||||
|
Channel strength |
|
|
|
||||
|
|
|
QAM modulation |
|
|
|
||
Supply voltage |
|
|
|
|
|
|
||
|
|
|
Signal strength |
|
|
|
||
Signal strength |
|
|
|
|
|
|
||
Channel strength |
CH No. |
|
|
Current |
|
Max. |
|
|
|
Signal strength |
|
|
|
|
|||
|
|
|
Quality |
|
|
|
||
|
|
|
|
|
|
|
||
|
Current |
Max. |
|
Current |
|
Max. |
|
|
|
Quality |
|
|
|
|
|||
|
|
|
|
|
|
|
||
|
Current |
Max. |
Channel strength of DVB-S/S2 |
|
|
|
||
|
|
|
|
|
|
|||
Signal strength for DVB-S/S2 |
|
Signal strength |
Frequency |
|
MHz |
|
||
|
Channel strength |
|
|
|||||
|
|
|
Symbol rate |
|
|
|
||
Signal strength |
|
|
|
|
|
|
||
|
|
|
Band |
Vert/Low |
|
|||
Channel strength |
|
|
|
|
||||
|
|
|
Signal strength |
|
|
|
||
|
|
|
|
|
|
|
||
|
Signal strength |
|
|
Current |
|
Max. |
|
|
|
|
|
|
|
|
|||
|
Current |
Max. |
|
Quality |
|
|
|
|
|
Quality |
|
|
Current |
|
Max. |
|
|
|
|
|
|
|
|
|||
|
Current |
Max. |
|
|
|
|
|
18
Turning on/standby the power
Turning on the power
Press <on the TV or >aon the remote control unit.
Standby mode
Press <on the TV or TV aon the remote control unit when TV is on.
•The TV enters standby mode and the image on the screen disappears.
•Weak electric power is still consumed even when the TV is turned standby mode.
•To completely turn off the power to the TV, unplug the AC cord from the AC outlet. However, do not unplug the AC cord unless otherwise instructed.
Switching between digital, satellite* and analogue broadcasts
Watching digital |
Watching analogue |
broadcasts |
broadcasts |
Watching satellite broadcasts
*Important information:
Satellite services are only available for the 635 model series.
NOTE
•If multiple satellite services are set, each time you press the SAT button the channel switches as follows.
SAT1 SAT2
SAT4 SAT3
Changing channels
|
With :r/s |
With 0_9 |
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
NOTE
•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
Selecting an external video source
Once the connection is made, press bto display the “INPUT” screen, and then press bor a/bto switch over to the appropriate external source with
;.
CH list
INPUT
TV
NOTE
•You can also select an external video source from “CH list” > “INPUT”.
•Only HDMI inputs which are not set for “Input skip” (Page 42) and properly connected inputs can be selected.
19
Watching TV
Selecting a sound mode
EDTV/SAT mode
If multi sound modes are received, each time you press 7the mode switches as follows.
Audio (ENG) |
STEREO |
||
L/R |
L |
R |
LR |
|
|
|
|
Audio (ENG) CH A
CH A CH B CH AB
Audio (ENG) MONO
Press c/dto select L or R sound when the STEREO or DUAL MONO screen is displayed.
Audio (ENG) STEREO
L/R |
|
L |
|
R |
|
LR |
NOTE
•The sound mode screen disappears in six seconds.
•Selectable items vary depending on the received broadcasts.
•When the “Audio description setting” menu is set to “On”, the audio description sound is selected depending on the main audio.
EATV mode
Each time you press 7, the mode switches as shown in the following tables.
|
NICAM TV broadcasts selection |
|
Signal |
Selectable items |
|
Stereo |
NICAM STEREO, MONO |
|
Bilingual |
NICAM CH A, NICAM CH B, NICAM CH AB, |
|
MONO |
||
|
||
Monaural |
NICAM MONO, MONO |
|
A2 TV broadcasts selection |
Signal |
Selectable items |
Stereo |
STEREO, MONO |
Bilingual |
CH A, CH B, CH AB |
Monaural |
MONO |
NOTE
•When no signal is input, the sound mode will display “MONO”.
Channel display
You can display the channel information by pressing pon the remote control unit.
DTV mode |
|
|
ATV mode |
||
|
|
|
|
|
|
|
|
|
|
|
|
Audio (ENG) |
STEREO |
|
|
Auto |
|
Video |
|
|
|
|
|
|
|
|
|
MONO |
|
Subtitle |
Off |
|
|
||
|
|
Subtitle |
|||
>> New information |
|
|
|||
|
|
|
|||
|
|
|
|||
|
|
|
|
|
|
IFour digit numbers (e.g., 0001) are displayed after selecting the five Nordic countries in the country setting.
SAT mode
NOTE
• Skip step 1 if receiving DTV/SAT broadcasts.
1Select a TV channel (the time information is automatically captured).
2Press p. The channel display will appear on the TV.
3Press pagain within the several seconds that the channel display is on the screen. Time information will be shown in the lower-right corner of the screen for several seconds.
4Even when you change the TV channel, you can display the time information with steps 2 and 3 above.
NOTE
•If acquired successfully, the time information will appear on the screen by pressing @.
Operation without a remote control unit
You can operate the menu settings using the TV control buttons.
Audio (ENG) |
STEREO |
Video |
|
Subtitle |
Off |
>> New information
JSatellite channels are displayed by four digit numbers (e.g., 0001).
KYou can set four satellite stations to “SAT1”, “SAT2“, “SAT3“, “SAT4”.
ETime display in channel information
You can display the time information included in DTV, SAT and teletext broadcasts.
TV control buttons |
Remote control buttons |
@ |
@ |
# |
; |
!r/s |
a/b |
Yk/l |
d/c |
20
Watching TV
EPG
EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule for DTV/SAT/RADIO/DATA, view detailed information about them and tune to an event currently on-air.
Useful settings for using EPG
View setting
EPG
If you want to use the EPG for digital stations, select “Yes”. The EPG data must be automatically captured while the TV is in standby mode. After setting to “Yes”, it may take some time to turn off the power using the remote control unit or the TV due to the data capture process.
Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Standby search” > “EPG”.
Option
Display range setup
The “Display range setup” allows you to select three types of time spans for display on the screen.
Go to “Menu” > “Setup” > “Option” > “EPG setup” > “Display range setup”.
|
|
Item |
|
Mode 1 (Wide |
Displays six hours of programme |
||
angle) |
|
information. |
|
Mode 2 |
(Zoom) |
Displays three hours of programme |
|
information. |
|||
|
|
||
Mode 3 |
(Vertical |
Changes to the EPG display format |
|
angle) |
|
with a vertical time span. |
Option
Genre icon setup
You can grey out or place a mark on desired genres and smoothly search for programmes you frequently watch.
1Go to “Menu” > “Setup” > “Option” > “EPG setup” > “Genre icon setup”.
2Press a/bto select the desired genre, and then press ;.
EGenre icon list
Icon |
Genre |
Icon |
Genre |
|
Movie/Drama |
|
Music/Ballet/Dance |
|
|
|
|
|
News/Current |
|
Arts/Culture |
|
affairs |
|
(without music) |
|
Show/Game show |
|
Social/Political |
|
|
issues/Economics |
|
|
|
|
|
|
Sports |
|
Education/Science/ |
|
|
Factual topics |
|
|
|
|
|
|
Children’s/Youth |
|
Leisure hobbies |
|
programmes |
|
|
|
|
|
3Press a/bto select a level to pick out or search for programmes you want to watch (“Standard”, “Light”, “Remark”).
21