Sharp LC-15AV4U, LC-20AV4U, LC-13AV4U User Manual

0 (0)
Sharp LC-15AV4U, LC-20AV4U, LC-13AV4U User Manual

OPERATION MANUAL

LCD COLOR TV

LC-13AV4U (13 INCH EASEL TYPE TABLE STAND) LC-15AV4U (15 INCH PEDESTAL TYPE TABLE STAND) LC-20AV4U (20 INCH PEDESTAL TYPE TABLE STAND)

FEATURES

MTS/SAP Tuner

181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.

PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tuning system provides free and easy channel selection and lets you tune directly to any channel using the Number buttons (0~9 and +100-key) on the remote control.

On-Screen Function Display

Remote Control

Sleep Timer

Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

Auto Shut Off Function- If there is no signal input from the antenna terminal for 5 minutes or no user operation for 180 minutes, the TV will turn itself off automatically.

AV Mode- Allows you to select from five picture options that will adjust colors to enhance your viewing experience.

V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.

S-VIDEO Input- Allows you to get better picture detail and clarity for the playback of S-VHS VCR tapes, DVDs, Satellite System or Video Cameras.

Progressive Scan Input- You can enjoy high quality definition using the Component Video input jacks if you connect other equipment that has Progressive Scan System.

SUPPLIED ACCESSORIES

Remote control unit

Operation Manual

(9HSUREMT21SH001)

(9HS1EMN20472)

Batteries ("AA" x 2)

(9HS1EMN20473)

PRECAUTIONS

Place your TV in a room with adequate ventilation.

Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.

Do not place your TV on soft surfaces, such as rugs or blankets.

Leave enough room for air to circulate around the bottom, top and back of the set.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The important note is located on the rear of the cabinet.

This manual describes the LC-13AV4U, LC-15AV4U and LC-20AV4U. These three models are different in size and shape, but operate identically.

The LC-20AV4U is illustrated in this manual.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPOTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

WARNING:

CAUTION:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

TO PREVENT ELECTRIC SHOCK, MATCH WIDE

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

CAUTION:

DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN.

FCC WARNINGThis equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. U.S.A. ONLY

Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eia.org

The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.

The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.

To prevent fire, never place any type of candle or flames on the top or near the TV set.

To prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product.

The serial number of this product may be found on the back of the TV. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. U.S.A. ONLY

IMPORTANT:

To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the TV.

Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy efficiency.

Model No.:

Serial No.:

1EMN20472/9HS1EMN20472

L3270UA/L3170UA/L3670UA*****

Printed in China

PORTABLE CART WARNING
S3126A

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp LCD COLOR TV. To ensure safety and many years of trouble-free operation of your product, please read the IMPORTANT SAFEGUARDS carefully before using this product.

IMPORTANT SAFEGUARDS

1. Read instructions-All the safety and operating instructions should be read before the appliance is operated.

2. Retain Instructions-The safety and operating instructions should be retained for future reference.

3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow Instructions-All operating and use instructions should be followed.

5. Cleaning-Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6. Attachments-Do not use attachments not recommended by the TV manufacturer as they may cause hazards.

7. Water and Moisture-Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. Accessories-Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or

table recommended by the manufacturer, or sold with the TV.

Any mounting of the appliance should follow the manu-

facturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance

and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

9.Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.Power Sources-This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions.

11.Grounding or Polarization-This TV is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

FIGURE A

 

EXAMPLE OF ANTENNA GROUNDING AS PER

 

NATIONAL ELECTRICAL CODE

ANTENNA

 

LEAD IN

 

WIRE

GROUND

 

CLAMP

 

 

ANTENNA

 

DISCHARGE UNIT

 

(NEC SECTION 810-20)

ELECTRIC

 

SERVICE

 

EQUIPMENT

GROUNDING CONDUCTORS

 

 

(NEC SECTION 810-21)

 

GROUND CLAMPS

NEC - NATIONAL ELECTRICAL CODE

POWER SERVICE GROUNDING

 

ELECTRODE SYSTEM

S 2 8 9 8 A

(NEC ART 250, PART H)

 

14.Lightning-For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges.

15.Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV.

18.Servicing-Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.Damage Requiring Service-Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power supply cord or plug is damaged or frayed.

b.If liquid has been spilled, or objects have fallen into the TV.

c.If the TV has been exposed to rain or water.

d.If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation.

e.If the TV has been dropped or damaged in any way.

f.When the TV exhibits a distinct change in performance-this indicates a need for service.

20.Replacement Parts-When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21.Safety Check-Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition.

22.Heat-This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

CONNECTIONS

[ANTENNA CONNECTION]

VHF Antenna

UHF Antenna

VHF/UHF

(Not supplied)

(Not supplied)

Combination Antenna

 

 

(Not supplied)

RF Cable (Not supplied)

VHF/UHF Combiner

 

 

(Not supplied)

OR

OR

[CATV/SATELLITE CONNECTION]

CATV Box *

*Some cable TV systems use scrambled signals

or Satellite Box

and require a special converter to receive these

(Not supplied)

channels. Consult your local cable company.

OUT IN

75-ohm Coaxial Cable (Not supplied)

OR

From Cable System

LC-20AV4U

or Satellite Antenna

 

75-ohm

 

Coaxial Cable

 

(Not supplied)

 

From Cable System

 

OPERATING CONTROLS AND FUNCTIONS

LC-13AV4U

 

 

 

 

 

LC-15AV4U

 

 

 

 

 

 

 

 

 

 

LC-20AV4U

 

 

 

 

 

 

 

 

 

 

1

2

3

4

5

7

1

2

3

4

5

6

 

 

 

 

 

 

 

 

 

 

6

7

 

 

 

1.MENU button- Press to display the menu on the TV screen.

2.VOL (ume) +/– buttons- Press to control the volume level.

Press to determine the setting mode from the menu on the TV screen.

-Press the VOL + button to select each item.

-Press the VOL – button to go back to the previous menu.

Press to select or adjust from a particular menu (for example: Language Selection, Channel Presetting, Closed Caption selection, AV mode selection, adjust of the Picture control adjustments or V- CHIP Set Up).

3.CH (annel) /buttons- Press to select memorized channels. Press to select the setting mode from the menu on the TV screen. Press to select item you want to adjust in the picture control mode.

4.INPUT button- Press to select TV or Video input (AV1 or AV2) mode. (See USING AUDIO/VIDEO INPUT JACKS.)

5.POWER button- Press to turn the TV ON or OFF (standby).

6.Power indicator- Lights up when power is on.

7.Infrared Sensor Window

8.Number buttons- Press two digits to directly access the desired channel. Remember to press a "0" before a single digit channel.

100 button- Press to select cable channels higher than 99.

9.FLASHBACK button- Press to go back to the previously viewed channel. For example, pressing this button once will change channel display from CH 6 (present channel) to CH 10 (previously viewed channel) and pressing it a second time will return from CH 10 to CH 6.

10.MUTE button- Press to mute the sound portion of the TV program (Volume level display turns light RED from light BLUE). Press this button again or press the VOL + or button to recall sound.

REAR PANEL

LC-20AV4U

12

13

14

15

11.

DISPLAY button- Press to display

REMOTE CONTROL

 

on screen the channel number, input

 

 

 

 

 

source, TV sound or the remaining

 

 

 

 

 

minutes on your sleep timer. If you

 

 

 

4

 

press it again, the display will disap-

5

 

 

 

pear.

 

1

2

3

12.

COMPONENT (Y/PB/PR) Video

 

8

 

 

 

 

input jacks- AV2: Connect to the

4

5

6

 

component video out jacks of a

 

7

8

9

 

DVD or set top box, etc.

 

 

9

 

0

100

 

If HDTV (720p/1080i) signals are

 

 

 

 

3

 

input to these jacks, "NOT

 

 

 

 

AVAILABLE" will appear on the

 

 

 

 

 

black background.

2

 

 

 

13. AUDIO L/R input jacks- AV2:

 

 

1

 

 

 

 

Connect to the left/right audio output

 

 

 

11

 

jacks of a DVD or set top box, etc.

10

 

 

14. S-VIDEO input jack- AV1:

 

 

 

 

 

Connect to the S-VIDEO output

 

 

 

 

 

jack of a video camera or VCR.

 

 

 

 

Note: When you connect using both

VIDEO and S-VIDEO cables simul-

LCDTV

 

taneously, the S-VIDEO jack is

 

given priority over the VIDEO jack.

 

15.VIDEO input jack- AV1: Connect to the video output jack of a video camera, VCR or video game.

16.AUDIO L/R input jacks- AV1: Connect to the left/right audio output jacks of a video camera, VCR or video game.

Note: The AUDIO L (input) jack is for monaural input. The sound is heard from both speakers. Use this jack for monaural audio equipment to be hooked up.

17.ANT(enna). in jack- Connect to an antenna, cable system or satellite system.

18.HEADPHONE jack- Connect headphone (not supplied) for personal listening.

Note: Do not connect earphones that have an L-shaped plug. The plug may interfere with the cabinet.

[INSTALLING THE BATTERIES]

1) Remove the battery compartment cover on the remote unit.

162) Insert 2 "AA" batteries into battery compartment in the direction as indicated by the polarity (+/–) markings. Batteries installed with incorrect polarity may damage the remote unit.

173) Replace the cover.

18

TABLE STAND

EASEL TYPE

(LC-13AV4U)

The angle of the TV has to be kept at 18°.

CAUTION :

Be careful not to hurt your fingers with the stand. Do not pick up the TV by its stand.

18°

PEDESTAL TYPE

(LC-15AV4U, LC-20AV4U)

Adjust the stand to change the angle of the TV (-2.5°~10°).

CAUTION :

Be careful not to hurt your fingers with the table stand.

-2.5°

10°

Loading...
+ 7 hidden pages