LC-32SH130K
LC-32SH130K
LCD COLOUR TELEVISION OPERATION MANUAL
ENGLISH
50201858
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
SHARP CORPORATION
http://www.sharp-eu.com
English - 1 -
Contents
Features ............................................................................................2
Dear SHARP customer ......................................................................2
Introduction ........................................................................................ 2
Preparation ........................................................................................ 2
Important safety precautions ............................................................. 3
Safety Precautions ............................................................................4
Connection to a Television Distribution System (Cable TV etc.)
from Tuner .................................................................................... 4
Package Contents ............................................................................. 5
Environmental Information ................................................................ 5
Repair Information ......................................................................... 5
Remote Control Buttons .................................................................... 6
LCD TV and Operating Buttons ......................................................... 7
Viewing the Connections - Back Connectors .................................... 7
Viewing the Connections - Side Connectors ..................................... 8
Power Connection ............................................................................. 8
Aerial Connection ..........................................................................8
Using USB Inputs .............................................................................. 8
Connecting to a DVD Player via HDMI .............................................. 9
Connecting to a DVD Player via Component Sockets (YPbPr) or
Scart Cable ........................................................................................ 9
Connecting the LCD TV to a PC ........................................................9
Using Side AV Connectors .............................................................. 10
Remote Control Handset ................................................................. 10
Inserting Batteries ........................................................................ 10
Switching On/Off ..............................................................................10
To Switch the TV On .................................................................... 10
To Switch the TV to Standby ........................................................ 10
To Switch the TV Off .................................................................... 10
Input Selection ................................................................................. 10
Basic Operations ............................................................................. 10
Operation with the Buttons on the TV .......................................... 10
Volume Setting ......................................................................... 10
Programme Selection ..............................................................10
Viewing Main Menu .................................................................. 10
AV Mode .................................................................................. 10
Operation with the Remote Control .............................................10
Volume Setting ......................................................................... 10
Programme Selection (Previous or Next Programme) 10
Programme Selection (Direct Access) ..................................... 10
Viewing Electronic Programme Guide (EPG) .................................. 11
Recording via EPG Screen .......................................................... 11
Programme Options..................................................................... 11
First Time Installation.......................................................................12
Installation .......................................................................................13
Automatic Channel Scan (Retune) Menu Operation 13
Manual Tuning ................................................................................ 13
Digital Manual Search.................................................................. 13
Analogue Manual Search ............................................................13
Analogue Fine Tune.....................................................................13
Clear Service List (*) .................................................................... 13
Managing Stations: Channel List ..................................................... 13
Operating the Channel List .......................................................... 14
Moving a Channel ........................................................................ 14
Deleting a Channel ...................................................................... 14
Renaming a Channel ................................................................... 14
Locking a Channel ....................................................................... 14
Managing Stations: Favourites ........................................................ 14
Button Functions .......................................................................... 14
Managing Stations: Sorting Channel List ........................................14
On-Screen Information .................................................................... 14
Media Playback Using Media Browser ............................................ 15
Viewing Videos via USB ............................................................. 15
Viewing Photos via USB .............................................................. 15
Slideshow Options ....................................................................... 15
Playing Music via USB ................................................................ 15
Recordings Library....................................................................... 16
Media Browser Settings ............................................................... 16
Timeshift Recording ........................................................................ 16
Instant Recording ............................................................................16
Watching Recorded Programmes .................................................. 17
Changing Image Size: Picture Formats ........................................... 17
Conguring Picture Settings ............................................................ 18
Operating Picture Settings Menu Items ....................................... 18
Picture Settings Menu Items ........................................................ 18
PC Picture Settings...................................................................... 18
Conguring Sound Settings ............................................................. 19
Operating Sound Settings Menu Items ........................................ 19
Sound Settings Menu Items......................................................... 19
Conguring Your TV’s Settings ........................................................ 19
Operating Settings Menu Items ................................................... 19
Settings Menu Items .................................................................... 19
Using a Conditional Access Module ................................................ 19
Viewing Conditional Access Menu (*) .......................................... 19
Conguring Language Preferences ................................................. 20
Language Settings ....................................................................... 20
Parental Control............................................................................... 20
Parental Settings Menu Operation .............................................. 20
Timers .............................................................................................. 21
Setting Sleep Timer ..................................................................... 21
Setting Programme Timers .......................................................... 21
Adding a Timer ......................................................................... 21
Editing a Timer ......................................................................... 21
Deleting a Timer ....................................................................... 21
Recording Conguration .................................................................. 21
Conguring Date/Time Settings ....................................................... 21
Conguring Source Settings ............................................................ 22
Conguring Other Settings .............................................................. 22
Operation ..................................................................................... 22
Other Features ................................................................................22
Teletext ............................................................................................ 23
Tips .................................................................................................. 23
Appendix A: PC Input Typical Display Modes .................................. 24
Appendix B: AV and HDMI Signal Compatibility (Input Signal
Types) .............................................................................................. 24
Appendix C: Supported DVI Resolutions......................................... 25
Appendix D: Supported File Formats for USB Mode ....................... 25
Appendix E: Software Upgrade ....................................................... 26
Specications ..................................................................................27
Dimensional Drawings ..................................................................... 28
End of life disposal ..........................................................................29
Detachable Stand Uninstallation Method ........................................30
Screw Dimensions ........................................................................... 31
English - 2 -
Features
Remote controlled colour LCD TV.•
Fully integrated Terrestrial digital TV (DVB-T - MPEG2) •
HDMI connectors for digital video and audio. This connection is also •
designed to accept high denition signals.
USB input.•
Programme recording•
Programme timeshifting•
1000 programmes (analogue+digital).•
OSD menu system.•
Integrated tuner MPEG2 compatible.•
Scart socket for external devices (such as video, video games, audio •
set, etc.).
Stereo sound system. (German+Nicam)•
Teletext, fastext, TOP text.•
Headphone connection.•
Automatic programming system.•
Forward or backward manual tuning.•
Sleep timer / Child lock.•
Automatic sound mute when no transmission.•
NTSC playback. •
AVL (Automatic Volume Limiting).•
Auto power down.•
PLL (Frequency Search).•
PC input. •
Plug&Play for Windows 98, ME, 2000, XP, Vista, Windows 7.•
Game Mode •
The illustrations and the OSD in this operation manual are for •
explanation purposes and may vary slightly from the actu al
operations.
The examples used throughout this manual are based on the LC-•
32SH130K model.
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product.
To ensure safety and many years of trouble-free operation of your
product, please read Important safety precautions carefully before
using this product.
Introduction
Please read the corresponding instructions of this handbook prior
to the rst usage of the device, even when the usage of electronic
devices is familiar to you. Please take notice of the chapter SAFETY
PRECAUTIONS. Carefully keep the handbook as future reference.
When selling the device or giving it away, provide these direction for
use.
Thank you for choosing this product. This manual will guide you for
the proper operation of your TV. Before operating the TV, please
read this manual thoroughly. Please do keep this manual in a
safe place for future references.
This device is intended to receive and display TV programs.
The different connection options make an additional expansion of the
reception and display sources possible (receiver, DVD player, DVD
recorder, VCR, PC etc.). This device is only suitable for the operation
in dry interiors. This appliance is intended solely for private domestic
use and may not be used for industrial and commercial purposes. We
exclude liability in principle, if the device is not used as intended, or
unauthorized modications have been made. To operate your LCD TV
in extreme ambient conditions may cause the damage of the device.
Preparation
For ventilation, leave a free space of at least 10 cm all around the set.
To prevent any fault and unsafe situations, please do not place any
objects on top of the set. Use this device in moderate climates.
10 cm
10 cm
10 cm
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is tted with a non-rewireable (moulded)
plug incorporating a 5A fuse. Should the fuse need to be replaced, a
BSI or ASTA approved BS 1362 fuse marked
ASA
or and of the same
rating as above, which is also indicated on the pin face of the plug,
must be used.
Always ret the fuse cover after replacing the fuse. Never use the plug
without the fuse cover tted.
In the unlikely event of the socket outlet in your home not being
compatible with the plug supplied, cut off the mains plug and t an
appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug
destroyed immediately and disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere
into a 13A socket outlet, as a serious electric shock may occur.
To t an appropriate plug to the mains lead, follow the instructions
below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the
following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product may not
correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the plug terminal •
which is marked N or coloured black.
The wire which is coloured brown must be connected to the plug •
terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the
earth terminal in your three pin plug.
Before replacing the plug cover make sure that:
If the new tted plug contains a fuse, its value is the same as that •
removed from the cut-off plug.
The cord grip is clamped over the sheath of the mains lead, and not •
simply over the lead wires.
IF Y O U HAV E A N Y DOUBT, C O N S U LT A Q U A L I F I E D
ELECTRICIAN.
English - 3 -
Important safety precautions
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid •
cleaners or aerosol cleaners.
Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it. Chemicals may •
cause damage or cracks in the cabinet of the TV.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet •
basement.
Do not place vases or any other water-lled containers on this product. The water may spill onto the product causing re or electric shock.•
Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious •
personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold
with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware
recommended by the manufacturer.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven •
oor surface can cause the product to fall from the cart.
Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and •
openings since insufcient ventilation can cause overheating and/or shorten the life of the product. Do not place the product
on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in
installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided
or the manufacturer’s instructions are followed.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impact applied. If the LCD panel •
is broken, be careful not to be injured by broken glass.
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products •
(including ampliers).
To prevent re, never place any type of candle or naked ames on the top or near the TV set.•
To prevent re or shock hazard, do not place the AC cord under the TV set or other heavy items.•
Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at high volume •
levels.
Do not display a still picture for a long time, as this could cause an afterimage to remain.•
There is power consumption always if main plug is connected.•
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. •
Request a qualied person to perform servicing.
The LCD panel is a very high technology product, giving you ne picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a xed point of blue,
green or red. This is within product specications and does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding it with two
hands—one hand on each side of the TV.
WARNING
To prevent the spread of re, keep candles or other open ames away from this product
at all times.
English - 4 -
Safety Precautions
Read the following recommended safety precautions carefully
for your safety.
Power Source
The TV set should be operated only from a 220-240V AC, 50Hz
outlet. Ensure that you select the correct voltage setting for your
convenience.
Power Cord
Do not place the set, a piece of furniture, etc. on the power cord (mains
lead) or pinch the cord. Handle the power cord by the plug. Do not
unplug the appliance by pulling from the power cord and never touch
the power cord with wet hands as this could cause a short circuit or
electric shock. Never make a knot in the cord or tie it with other cords.
The power cords should be placed in such a way that they are not
likely to be stepped on. A damaged power cord can cause re or give
you an electric shock. When it is damaged and needs to be replaced,
it should be done by qualied personnel.
Moisture and Water
Do not use this device in a humid and damp place (avoid
the bathroom, the sink in the kitchen, and near the
washing machine). Do not expose this device to rain or
water, as this may be dangerous and do not place objects
lled with liquids, such as ower vases, on top. Avoid from
dripping or splashing.
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualied personnel before operating
it any further.
Cleaning
Before cleaning, unplug the TV set from the wall outlet.
Do not use liquid or aerosol cleaners. Use soft and dry
cloth.
Ventilation
The slots and openings on the TV set are intended for
ventilation and to ensure reliable operation. To prevent overheating,
these openings must not be blocked or covered in anyway.
Heat and Flames
The set should not be placed near to open ames and
sources of intense heat such as an electric heater. Ensure
that no open ame sources, such as lighted candles, are
placed on top of the TV. Batteries should not be exposed
to excessive heat such as sunshine, re or the like.
Lightning
In case of storm and lightning or when going on holiday,
disconnect the power cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that the service
technician has used replacement parts, which are specied by the
manufacturer or have the same specications as the original one.
Unauthorized substitutions may result in re, electrical shock or other
hazards.
Servicing
Please refer all servicing to qualied personnel. Do
not remove the cover yourself as this may result in an
electric shock.
Waste Disposal
Packaging and packaging aids are recyclable and should principally •
be recycled. Packaging materials, such as a foil bag should be kept
away from children
Batteries, including those which are heavy metal free, should not be •
disposed of with household waste. Please dispose of used batteries
in an environmentally friendly manner. Find out about the legal
regulations which apply in your area.
Do not try to recharge batteries, there is a danger of explosion. •
Replace batteries only with the same or equivalent type.
This symbol on the product or on its packaging means that your
electrical and electronic device should be disposed at the
end of its service life separately from your household
wastes. There are separate collection systems for recycling
in the EU. For more information, please contact the local
au th or it y or the dealer w he re you purch as ed the
product.
Disconnecting the Device
The mains plug is used to disconnect the TV set from the mains and
therefore it must remain readily operable.
Headphone Volume
Excessive sound pressure from earphones and headphones
can cause hearing loss.
Installation
To prevent injury, this device must be securely attached to the wall in
accordance with the installation instructions when mounted to the wall
(if the option is available).
LCD Screen
The LCD panel is a very high technology product with about a million
thin lm transistors, giving you ne picture details. Occasionally, a few
non-active pixels may appear on the screen as a xed blue, green
or red point. Please note that this does not affect the performance of
your product.
Warning! Do not leave your TV in standby or operating mode when
you leave your house.
Connection to a Television Distribution System (Cable
TV etc.) from Tuner
Device connected to the protective earthing of the building installation
through the mains connection or through other apparatus with a
connection to protective earthing-and to a television distribution
system using coaxial cable, may in some circumstances create a re
hazard.
Connection to a cable distribution system has therefore to be provided
through a device providing electrical isolation below a certain frequency
range (galvanic isolator, see EN 60728-11).
Note:The HDMI connection between PC and TV may cause radio
interference in which case it is recommended to use VGA(DSUB-15)
connection.
The Standby Off/On button doesn´t separate this device completely
from mains. Moreover the device consumes power in the standby
operation. In order to separate the device completely from mains, the
mains plug has to be pulled from the mains socket. Because of that
the device should be set up in a way, that an unobstructed access to
mains socket is guaranteed, so that in case of emergency the mains
plug can be pulled immediately. To exclude the danger of re, the power
cord should principally be separated from the mains socket prior to a
longer period of non-usage, i.e. during vacations.
“HDMI, the HDMI logo and H ig h-Definitio n •
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.”
Man u fac t ured unde r lic e nse f rom D olb y •
Laboratories.
English - 5 -
The “HD TV 1080p” Logo is a trademark of EICTA.•
The DVB logo is the registered trademark of the •
Digital Video Broadcasting—DVB—project.
Electrical device not in the hands of children
Never let children use any electrical device unsupervised. Children
cannot always recognise possible dangers. Batteries / accumulators
can be life threatening when swallowed. Store batteries out of the reach
of small children. In case of swallowing a battery medical aid has to be
sought immediately. Also keep the packaging foils away from children
as there is danger of suffocation.
Package Contents
SLEEP
SCREEN
PRESETS
LANG.
FAV
EPG
SWAP
SOURCE
C
DISP.
SEARCH
MODE
INFO
CH
V
Remote Control
LCD TV
Batteries: 2 X AAA
Instruction Book
Quick Guide
1 X Component Video Connection Cable
Note: You should check the accessories after purchasing. Make sure
that each accessory is included.
As the manufacturer’s specication supports communication on cable
lengths shall be smaller than 3m.
Environmental Information
This television is designed to consume less energy to save •
environment.
You not only help to save the environment but also you can save
money by reducing electricity bills thanks to the energy efciency
feauture of this TV. To reduce energy consumption, you should take
the following steps:
You can use Power Save Mode setting, located in the Other Settings •
menu. If you set Power Save Mode as On, the TV will switch to
energy-saving mode and luminance level of TV set will be decreased
to optimum level. Note that some picture settings will be unavailable
to be changed when the TV is in Power Save Mode.
When the TV is not used, please switch off at the rear rocker switch •
to further reduce power consumption.
Disconnect the TV from the mains socket when it will not be used •
for prolonged periods.
When the TV is left in stand-by it consumes a small amount of power •
switching off at the rear rocker switch or disconnect the TV from the
mains will make further energy savings. Note activating the “Power
Save Mode” saves on an annual bases more energy than switching
off the mains when the TV is not used, to save most energy it is highly
recommended that “Power Save Mode” is switch on.
Repair Information
Please refer all servicing to qualied personnel. Only qualied personnel
must repair the TV. Please contact your local dealer, where you have
purchased this TV for further information.
English - 6 -
Remote Control Buttons
Standby1.
Image size / Zooms videos (in Media Browser video mode)2.
Sleep Timer3.
Mono / Stereo - Dual I-II / Currrent Language (*) (in DVB 4.
channels)
Favourite Mode Selection (in DVB channels)5.
Numeric buttons6.
Electronic programme guide (in DVB channels)7.
No function8.
Media Browser9.
Navigation buttons (Up/Down/Left/Right)10.
No function11.
Recordings Library12.
Programme Down / Page up - Programme Up / Page down13.
Mute14.
Programme recording15.
Pause (in Media Browser mode) / Timeshift recording 16.
Rapid reverse (in Media Browser mode)17.
Play (in Media Browser mode)18.
Red button19.
Green button / List Schedule (in EPG) / Tag / Untag All (in 20.
favourite list) / Play-Slideshow (in Media Browser) / Loop-Shufe
(in Media Browser)
Picture mode selection / Changes picture mode (in Media 21.
Browser video mode)
No function22.
Teletext / Mix (in TXT mode)23.
Subtitle on-off (in DVB channels)24.
Previous programme25.
AV / Source selection26.
Menu on-off27.
Okay (Conrm) / Hold (in TXT mode) / Edit Channel List28.
Exit / Return / Index page (in TXT mode)29.
No function30.
Info / Reveal (in TXT mode)31.
Volume Up / Down32.
No function33.
No function34.
Rapid advance (in Media Browser mode)35.
Stop (in Media Browser mode)36.
Blue button / Edit Channel List / Filter (In Favourite List&EPG) 37.
Yellow button / Timeline Schedule (in EPG)38.
SLEEP
SCREEN
PRESETS
LANG.
FAV
EPG
SWAP
SOURCE
C
DISP.
SEARCH
MODE
INFO
CH
V
English - 7 -
LCD TV and Operating Buttons
FRONT and REAR VIEW
Control buttons VIEW
Control Buttons
1. Standby/On button
2. TV/AV button
3. Programme Up/Down buttons
4. Volume Up/Down buttons
Note: Press “ ” and
buttons at the same time to view
main menu.
Viewing the Connections - Back Connectors
SPDIF
SCART
VGA
Coax.OUT
1
2
HDMI 2: HDMI Input1.
HDMI 1: HDMI Input2.
HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of displaying High Denition pictures
from devices such as a High Denition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or
Component Socket. These sockets can accept either 720p or 1080i signals. No sound connection is needed for an HDMI to HDMI
connection.
RF Input3. connects to an aerial antenna system.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate
antenna cable, as shown in the illustration in the following pages.
SCART 4. input or output for external devices. Connect the SCART cable between SCART socket on TV and SCART socket on your external
device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode. Note: S-VHS signal is supported
via the scart socket.
PC Input5. is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
SPDIF Coaxial Out6. outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has SPDIF input
English - 8 -
Viewing the Connections - Side Connectors
CI Slot1. is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more
information, see “Conditional Access” section.
USB Inputs2. .
Note that programme recording feature is available via these USB inputs. You can connect external hard disk drives to
this input.
Video Input3. i s u se d f o r c on n ec t i ng v id e o s i g n al s o f e x t e rn a l d e v i ce s . Co n ne c t t h e v id e o
ca b l e bet w e e n th e VIDE O I N s o c k e t o n t h e T V and t he V I D E O O U T jack o n y o u r d e v i c e .
Audio Inputs4. are used for connecting audio signals of external devices. Connect the audio cable between the AUDIO
INPUTS on the TV and the AUDIO OUTPUT jacks on your device. Note: If you connect a device to the TV via the VIDEO
INPUT, you should also connect your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.
Component Video Input (YPbPr)5. is used for connecting component video.
You can connect the component video and audio sockets with a device that has component output. To do this, you
must use the supplied component video connection cable for enabling connection. First, plug single jack of the cable
to the TV’s YPbPr socket (side). Afterwards, insert your component cable’s (not supplied) connectors into the plural
part of the Component video connection cable. Colours of the connected jacks should match.
Headphone6. jack is used for connecting an external headphone to the system. Connect to the HEADPHONE jack to
listen to the TV from headphones (optional).
7. , switch is used for turning the TV on or off.
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Plug the power cable to •
the mains socket outlet.
Aerial Connection
Connect the aerial ,cable TV plug to the AERIAL INPUT socket located at the rear of the TV.•
SPDIF
SCART
VGA
Coax.OUT
1
2
Using USB Inputs
USB Connection
You can connect a USB hard disk drive or USB memory stick to your TV by using the USB inputs of the TV. This feature allows you to play •
les stored in a USB drive or record programmes.
2.5” and 3.5” inch (hdd with external power supply) external hard disk drives are supported.•
To record a programme, you should rst connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to •
enable recording feature. Otherwise, recording feature will not be available.
IMPORTANT !
You may back up your les before making any connections to the TV set in order to avoid any possible data loss. Note that manufacturer will •
not be responsible for any le damage or dataloss.
It is possible that certain types of USB devices (e.g. MP3 Players) or USB hard disk drives/memory sticks may not be compatible with this •
TV.
IMPORTANT: The TV supports only FAT32 disk formatting. NTFS format is not supported. If you connect a USB disk with NTFS format, the TV
will ask you to format the content. See the section, “Format Disk” in the following pages for more information on disk formatting.
Note that ALL the data stored on the USB disk will be lost and then the disk format will be converted to FAT32 in such a case.
USB Disk Connection
• Plug your USB device to the USB input of the TV.
Note: Plug or unplug your USB disk while the TV is switched off.
Note: If you are going to connect a USB hard disk drive to the TV set, USB connection cable used between the disk drive and the TV should
have a USB logo and should be as short as possible.
Note: While formatting a USB hard disk that has 1TB (Tera Byte) or more le capacity, you can experience problems with the formatting process.
In such a case, you should format the disk with your personal computer and the formatted disk type should be FAT32.
SIDE VIEW USB MEMORY
5Vdc
Max:500mA
USB
CAUTION !
English - 9 -
Quickly plugging and unplugging USB devices, is a very hazardous •
operation. Especially, do not repeatedly quickly plug and unplug
the drive. This may cause physical damage to the USB player and
especially the USB device itself.
Do not pull out USB module while playing or recording a le.•
Programme Recording
To record a programme, you should rst connect a USB disk to your
TV while the TV is switched off. You should then switch on the TV to
enable recording feature.
IMPORTANT: When using a new USB hard disk drive, it is recommended
that you rst format the disk using your TV’s “Format Disk” option.
To use the recording function a USB 2.0 certied device of at least •
1GB should be used, If the connected USB device is not USB 2.0 an
error message will be displayed.
Recorded programmes are saved into the connected USB disk in .TS •
format (MPEG-2 transport stream). If desirable, you can back up /
copy these saved recordings into a personal computer.
Note: It is possible that recorded broadcasts in .TS format may not be
supported by your media playback software. In such a case, you should
install an appropriate media playback software to your computer.
An hour of the recordings stored occupies approximately 2 GB of •
space.
For more information on recording programmes, see sections •
“Instant Recording”, “Timeshifting”, “Electronic Programme Guide”,
“Recordings Library” or “Recording Timers” in the following parts.
Recorded programmes are split into 1GB partitions. Names of the •
stored recordings’ last three digits indicates this: Such as 4801-000.
ts , 4801-001.ts.
Recorded programmes are stored in the following directory of the •
connected USB disk: \DVR\RECS. All recordings are indicated with
a number (such as 4801-000.ts). A text (txt) le is created for each
recording. This text le includes information such as broadcaster,
programme, and recording time.
If the writing speed of the connected USB disk is not sufcient, •
recording may fail and timeshifting feaute may not be available.
Recordings of HD programmes can occupy bigger size on the •
USB disk depending on the broadcast’s resolution. For this reason
it is recommended to use USB hard disk drives for recording HD
programmes.
Do not plug out the USB/HDD during the recording. This may harm •
the connected USB/HDD.
Only two partitions on a HDD unit can be supported.•
Some stream packets may not be recorded because of signal •
problems, so sometimes video may freezes during playback.
Record, Play, Pause, Display (for PlayListDialog) keys could not •
be used when teletext is ON. If a recording starts from timer when
teletext is ON, teletext is automatically turned off. Also teletext usage
is disabled when there is ongoing recording or playback.
If the recording time of an event is longer than the memory capacity,
the following message will appear on the screen: “There is not enough
space for ‘event’ but it will be recorded until the drive is full”.
Connecting to a DVD Player via HDMI
Please refer to your DVD player’s instruction book for additional
information. Power off both the TV and the device before making
any connections.
Note: Not all cables shown in the illustration are supplied.
If your DVD player has an • HDMI socket, you can connect via HDMI for
better video and audio quality.
SPDIF
SCART
VGA
Coax.OUT
1
2
External device
(not supplied)
HDMI Cable
When you connect to DVD player as illustrated above, switch to the •
connected HDMI source. See, Input Selection section for more
information on changing sources.
Connecting to a DVD Player via Component
Sockets (YPbPr) or Scart Cable
If you want to connect a DVD player to your LCD TV, you can use
connectors of the TV set. DVD players may have different connectors.
Please refer to your DVD player’s instruction book for additional
information. Power off both the TV and the device before making any
connections.
Note: Cables shown in the illustration are not supplied.
If your DVD player has an HDMI socket, you can connect via HDMI. •
When you connect to DVD player as illustrated below, switch to HDMI
source. See, “Input Selection” section.
You may also connect through the scart socket. Use a SCART cable •
as shown below.
Note: These two methods of connection perform the same function
but in different levels of quality. It is not necessary to connect by all
three methods.
HDMI
inputs
Scart sockets
DVD Player
Scart Cable
(not supplied)
HDMI Cable
(not supplied)
HDMI
SCART
Some DVD players are connected through • COMPONENT SOCKETS
(YPbPr). In this case, you must use the supplied Component video
connection cable for enabling connection. First, plug single jack of
the cable to the TV’s YPbPr socket (side). Afterwards, insert your
component cable’s (not supplied) connectors into the plural part of the
Component video connection cable (see illustration below). Colours
of the connected jacks should match.
To enable audio connection, use the • VGA/Component Audio cable.
First, plug single jack of the cable to the TV. Afterwards, insert your
DVD player’s audio cable’s connectors into the plural part of the VGA/
Component audio connection cable (see illustration below). Colours
of the connected jacks should match.
YPbPr
Side view
DVD Player
Connection Cable
(supplied)
YPbPr Video Cable
(Not supplied)
When the connection is made, switch to • YPbPr source. See, Input
selection section.Note: To connect YPb Pr device, you should use supplied
component (YPbPr) connection cable.
Loading...