Loading...
R
FU-40SE-K
AIR PURIFIER
OPERATION MANUAL
Tabletop / wall-mounting type
ENGLISH
FEATURES
Cluster Ion Control
The unit controls the ratio of minus cluster ions and plus cluster ions depending on the condition of the room.
• Clean mode
Approximately the same amount of plus and minus cluster ions are discharged. This mode is effective for reducing floating mold and household odors in the air.
• Refresh mode
It is said that plenty of minus ions exist in places such as waterfalls or forests.
In this operation mode, minus ions will be released in an increased rate, in order to bring the room air close to this condition.
• AUTO cluster ion mode
The unit will switch between the Clean mode and Refresh mode automatically depending on the amount of pollution in the air detected by dust and odor sensor.
HEPA Filter
• High-efficiency dust collection
Stamina-power carbon
Powerful deodorization by large particles of columnar charcoal.
FOR UNDERSTANDING THE PRODUCT
Some of the odor ingredients adsorbed by the filters become separated and are discharged through the exhaust port as odor.
Depending on the usage environment, this odour may become strong after several months and the exhaust port may smell.
In this case, purchase an exchange filter FZ-40SEF of the option goods, and replace the filters.
This equipment complies with the requirements of Directives 89/ 336/EEC and 73/23/EEC as amended by 93/68/EEC.
CONTENTS
SAFETY PRECAUTIONS ........................ |
E-2 |
• CAUTIONS CONCERNING THE USAGE |
E-3 |
OF THIS PRODUCT .................................... |
|
• CAUTIONS WHEN MOUNTING THIS |
E-3 |
PRODUCT ON A WALL ............................... |
|
• CAUTIONS CONCERNING |
E-3 |
THE INSTALLATION .................................... |
|
NAMES OF PARTS ................................. |
E-4 |
• ACCESSORIES ........................................... |
E-5 |
INSTALLATION ....................................... |
E-6 |
• WHEN USING THE UNIT ON A TABLETOP .. |
E-6 |
• WHEN WALL MOUNTING THE UNIT .......... |
E-7 |
PREPARATION ........................................ |
E-8 |
• INSTALLING THE FILTERS ......................... |
E-8 |
• INSERTING BATTERIES |
E-8 |
IN THE REMOTE CONTROL ...................... |
|
• USING THE REMOTE CONTROL ............... |
E-9 |
OPERATION .......................................... |
E-10 |
• MAIN UNIT OPERATION .......................... |
E-10 |
• REMOTE CONTROL OPERATION ........... |
E-11 |
CARE AND MAINTENANCE ................. |
E-12 |
• MAIN UNIT ................................................ |
E-12 |
• FILTERS .................................................... |
E-12 |
• GUIDE FOR LIFE OF FILTERS ................ |
E-13 |
TROUBLE SHOOTING .......................... |
E-14 |
SPECIFICATIONS ................................. |
E-14 |
Thank you for purchasing the SHARP FU-40SE. Please read this manual carefully for the correct usage. Before using this product, be sure to read “Safety precautions.”
After reading this manual, retain it in a convenient location for future reference.
This product is for household use only.
E-1
SAFETY PRECAUTIONS
•Do not use the unit if the power cord or plug is damaged or the connection to the wall outlet is loose.
Electrical shock, short circuit and/or fire may occur as a result.
•Do not damage, break, coat, forcefully bend, pull, twist, bundle, pinch or place heavy objects on the power cord.
If the power cord is damaged, fire and/or electrical shock may occur as a result.
•Use AC 220~240V only.
•Do not modify. Repair and disassembly of this product are to be performed by authorized service personnel only.
Fire, electrical shock and/or bodily injury may occur if not.
For repair, contact your dealer or the nearest Sharp Service Center.
•Periodically remove dust from the power plug
Accumulated dust on the power plug may cause bad insulation from humidity, etc. Fire and/or electrical shock may occur as a result.
•When cleaning the unit, be sure to remove the power plug from the wall outlet.
In addition, never handle the power plug with wet hands. Electrical shock and/or bodily injury may occur as a result.
•Do not use the unit where there are oil ingredients such as cooking oil, etc., in the air.
Cracking of the unit surface may occur as a result.
•Do not wipe the unit with benzene or paint thinner. Also, do not spray insecticides on the unit.
Cracking, electrical shock and/or fire may occur as a result.
•Do not operate the unit when using indoor smoke-generating insecticides.
Chemical ingredients may accumulate within the unit and then discharge from the exhaust port when the unit operates. Discharge of such chemicals may be unhealthy to your body.
•Do not allow the unit to intake flammable gases, sparks from lit cigarettes, incense, etc.
The unit may ignite as a result.
•Do not use the unit where it is humid, such as in a bathroom, etc., or where the unit may get wet.
Electrical shock and/or malfunction may occur as a result.
•Do not insert fingers or foreign objects into the intake or exhaust ports.
Electrical shock and/or malfunction may occur as a result.
•When mounting to a wall, select a sturdy wall or studding.
The unit may fall if not.
•When removing the power plug, always hold the plug and never pull the cord.
Electrical shock and/or fire from short circuit may occur as a result.
•Ventilate when using the unit along with a heating appliance.
Carbon monoxide poisoning may occur as a result.
•Remove the power plug when not using the unit.
•If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid a hazard.
•The batteries must be disposed of safely.
E-2
CAUTIONS CONCERNING THE USAGE OF THIS PRODUCT
•Do not block the intake and exhaust ports.
•Do not use the unit near or on hot objects, such as a stove, etc. Also, do not use the unit where it may come into contact with steam.
•Do not use the unit on its side.
Deformation, malfunction and/or overheating of the motor may occur as a result.
•Do not install when there is generation of lampblack, such as in a kitchen, etc.
•Do not use detergent when cleaning the unit.
The unit surface may become damaged or cracked. In addition, the sensors may malfunction as a result.
•When transporting the unit, always hold the handle on the back of the unit.
Holding the front panel when carrying may cause it to detach, thus dropping the unit and resulting in bodily injury.
CAUTIONS WHEN MOUNTING THIS PRODUCT ON A WALL
•Never mount the unit to a thin wall or plasterboard of insufficient strength.The unit may fall as a result.
•When mounting the unit to a wall, remove the front panel and hold the main unit.
Holding the front panel may cause it to become detached, thus dropping the unit and resulting in bodily injury.
•Do not install when there is generation of lampblack, such as in a kitchen, etc.
The unit surface may crack or the sensors may malfunction as a result.
CAUTIONS CONCERNING THE INSTALLATION
DO NOT USE THE REMOTE CONTROL IN THE FOLLOWING LOCATIONS
•Locations where there are inverter lighting equipment or electronic spontaneous lighting equipment
The remote control may become inoperative. In this case, move away from such lighting equipment or change direction.
•Location exposed to direct sunlight
The unit may not received signals from the remote control
INSTALLATION
•Leave at least 2m of space from televisions and radios
Electrical interference may occur if not.
•Leave at least 60cm of space from the wall
The motor may overheat, causing malfunction if not.
•Avoid a location where sensors are exposed to direct wind
The unit may not operate properly.
•Avoid a location where curtains, etc., come into contact with the intake or exhaust port.
Curtains, etc., may become dirty or malfunction may occur as a result.
EFFECTIVE USAGE
•Place on a stable surface with sufficient air circulation
•Near smoking area
Air pollution is detected quickly.
ABOUT THE FILTER
•Do not wash or reuse Apatite HEPA filter and deodorization filter.
•Small dust particles and odors such as tobacco smoke rise and accumulate at the top of the room.
•Large dust such as pollen and house dust accumulate at the bottom of the room.
•The wall, etc., behind the exhaust port may become dirty as time passes. When using the unit for extensive period in the same location, use a vinyl sheet, etc., to prevent the wall from becoming dirty. In addition, periodically clean the wall, etc.
E-3
Loading...