COLOR TELEVISION
MODEL
32R-S400
36R-S400
L OPERATION MANUAL L
As an ENERGY STAR ® Partner, SHARP has determined that this product meets the
ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered trademark.
|
CONTENTS |
|
|
|
PAGE |
• IMPORTANT INFORMATION/IMPORTANT |
|
|
|
SAFEGUARDS ................................................... |
2 ~ 4 |
• |
Supplied Accessories ............................................... |
5 |
• |
Before Operating Your Television ............................. |
5 |
• |
Antenna Connections ......................................... |
5 ~ 6 |
• Quick Reference Control Operation ................... |
7 ~ 9 |
|
• EZ SETUP during First Use ................................... |
10 |
|
• |
Demo Mode ............................................................ |
11 |
• |
Accessing the MAIN MENU screen without |
|
|
Remote Control ...................................................... |
11 |
• |
Language ............................................................... |
12 |
• |
Sleep Timer ............................................................ |
12 |
• |
Video Adjust ........................................................... |
13 |
• |
Audio Select ................................................... |
14 ~ 15 |
|
MTS (MULTICHANNEL TV SOUND) .................. |
14 |
|
INTERNAL SPEAKER SWITCH ......................... |
14 |
|
FAO ..................................................................... |
14 |
This operating manual includes basic operating instructions in Spanish and French.
SPANISH is on page 8, 45. FRENCH is on page 9.
|
|
PAGE |
• |
Closed Caption ....................................................... |
16 |
• |
Parent Control ................................................ |
17 ~ 27 |
|
V-CHIP ........................................................ |
17 ~ 24 |
|
VIEW TIMER .............................................. |
25 ~ 27 |
• |
Energy Save ........................................................... |
27 |
• |
Set Up ............................................................ |
28 ~ 33 |
|
EZ Setup ............................................................. |
28 |
|
Channel Setting .......................................... |
29 ~ 31 |
|
Blue Screen ........................................................ |
31 |
|
Personal Preference ........................................... |
32 |
|
Universal Plus Function ...................................... |
33 |
• PIP (Picture In Picture) ................................... |
34 ~ 35 |
|
• Using the Video and Audio Input Jacks .......... |
36 ~ 37 |
|
• Using the Audio Output Jacks ................................ |
38 |
|
• Operation of Remote Control ......................... |
39 ~ 43 |
|
• Before Calling for Service ............................... |
44 ~ 45 |
|
• |
Calling for Service .................................................. |
44 |
• |
Specifications ......................................................... |
46 |
• |
Limited Warranty .................................................... |
47 |
7366 GJ 1
01-02 32/36R-S400.p65e |
1 |
16/4/01, 11:25 AM |
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television
– built for outstanding quality, reliability and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL so that you may adjust the picture and color to your personal viewing preference.
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color Television set for years to come.
Please read these instructions carefully, and keep them handy for your future reference.
IMPORTANT
To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the TV.
Model No.:
Serial No.:
IMPORTANT INFORMATION
There are two important reasons for prompt warranty registration of your new SHARP television set, using the REGISTRATION CARD packed in with the set.
FIRST – WARRANTY
This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor warranty applicable to your purchase.
SECOND – CONSUMER PRODUCT SAFETY ACT
To assure that you will promptly receive any safety notification on inspection, modification or recall that SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE.
WHAT IS ENERGY STAR ®
TVs and VCRs use energy both when they are on and when they are off. Americans spend more than $1 billion a year on energy consumed by TVs and VCRs when they are not in use. The new ENERGY STAR ® models will reduce that energy “leakage” by up to 75 percent. Ultimately, this will mean more than $500 million a year in energy savings for consumers.
The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution that contributes to global warming. If every American family replaced their TVs and VCRs with ENERGY STAR ® models, it would reduce carbon dioxide emissions by five million tons every year — equivalent to eliminating the pollution from more than one million cars.
By using ENERGY STAR ® products, you will save money on your electric bills and use less energy. That makes good economic sense and it’s good for our environment.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT WARNING: EXPOSE THIS APPLIANCE TO WET LOCATIONS.
CAUTION: TO REDUCE THE RISK OF |
ELECTRIC SHOCK, |
DO NOT REMOVE COVER (OR BACK). |
NO USER-SERVICEABLE PARTS INSIDE. |
REFER SERVICING TO QUALIFIED SERVICE |
PERSONNEL. |
The lightning flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”
2
01-02 32/36R-S400.p65e |
2 |
16/4/01, 11:25 AM |
IMPORTANT INFORMATION (Continued)
WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
PRODUCT DISPOSAL
This product utilizes a Cathode Ray Tube (CRT) containing lead and tin lead solder.
Disposal of these materials may be regulated due to environment considerations. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance:www.eiae.org
IMPORTANT SAFEGUARDS
CAUTION: Please read all of these instructions before you operate your television and save these instructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic rules for its installation, use and servicing.
1.Unplug this television equipment from the wall outlet before cleaning.
2.Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3.Do not use attachments not recommended by the television equipment manufacturer as they may cause hazards.
4.Do not use this television equipment near water — for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool, etc.
5.Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand recommended by the manufacturer or sold with the television equipment.
6.Television equipment and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination to overturn.
7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturer.
8.Slots and openings in the cabinet and the back or bottom are provided for ventilation. To insure reliable operation of the television equipment and to protect it from overheating, these openings must not be blocked or covered. This television equipment should not be placed in a built-in insulation such as a bookcase unless proper ventilation is provided.
9.The openings should never be covered with a cloth or other material, and the bottom openings should not be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television equipment should never be placed near or over a radiator or heat register.
10.This television equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your television dealer or local power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11.As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger than the other). The 2-wire polarized plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat this safety feature.
12.Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will be abused by persons walking on it.
13.Follow all warnings and instructions marked on the television equipment.
3
03-04 32/36R-S400.p65e |
3 |
16/4/01, 11:23 AM |
IMPORTANT SAFEGUARDS (Continued)
14.If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
ACCORDING TO NATIONAL ELECTRICAL CODE.
|
ANTENNA LEAD-IN WIRE |
|
GROUND CLAMP |
|
ANTENNA DISCHARGE UNIT |
ELECTRIC |
(NEC SECTION 810-20) |
|
|
SERVICE |
GROUNDING CONDUCTORS |
EQUIPMENT |
(NEC SECTION 810-21) |
|
GROUND CLAMPS |
|
POWER SERVICE GROUNDING ELECTRODE SYSTEM |
|
(NEC PART 250, PART H) |
NEC - NATIONAL ELECTRICAL CODE
15.For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.
16.An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
17.Do not overload wall outlets and extension cords as this can result in fire or electric shock.
18.Never push objects of any kind into this television equipment through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television equipment.
19.Do not attempt to service this television equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20.Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions:
A.When the power cord or plug is damaged or frayed.
B.If liquid has been spilled into the television equipment.
C.If the television equipment has been exposed to rain or water.
D.If the television equipment does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the television equipment to normal operation.
E.If the television equipment has been dropped or the cabinet has been damaged.
F.When the television equipment exhibits a distinct change in performance — this indicates a need for service.
21.Upon completion of any service or repairs to this television equipment, ask the service technician to perform routine safety checks to determine that the television is in safe operating condition.
22.When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
4
03-04 32/36R-S400.p65e |
4 |
16/4/01, 11:23 AM |
Supplied Accessories
POWER TV DVD VCR DISPLAY INPUT |
|
TV |
VCR |
CH/SKIP |
|
|
1 2 3 4 5 6 |
7 8 9 FLASHBACK ENTER 0 100 PERSONAL PREFERENCE A B C D CH VOL VOL — + CH MENU MUTE CATV |
DVD |
REW PLAY FF PAUSE STOP REC PIP SWAP FREEZE MOVESELECT |
TV • CATV • VCR • DVD |
|
|
Infrared Remote Control/Part Number |
Size AA |
|||||
|
|
RRMCG1627CESA |
|
Dry Batteries |
||
Before Operating Your Television
Location
•For normal operation, your TV should be located in an area of the room where cool adequate ventilation is provided. Do not place the back of the television set in a place where free airflow will be restricted.
•Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using magnets or any other magnetic substance, such as iron are kept well away from this TV set.
Power
Your TV operates on 120 Volts, 60 Hertz (normal household current) and has a polarized plug. If you are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an electrician. Do not defeat the safety feature of the polarized plug.
Note:
•If the set will not be used for a long period, such as during a vacation, unplug the set from the wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the POWER BUTTON in the OFF position.)
•Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off either the TV or the radio.
•If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received due to the interference of the TV.
LBefore using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
Pull up
Battery 
Cover
•With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two batteries (size “AA”). Be sure to match the battery e/d terminals with the e/d marks inside the compartment.
Antenna Connections
Antennas
•The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various antenna systems:
5
05-06 32/36R-S400.p65e |
5 |
16/4/01, 11:24 AM |
Antenna Connections (Continued)
1.A 75 ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied).
2.A 300 ohm system is a flat “twin-lead” cable that can be attached to a 75 ohm terminal through a 300-75 ohm ADAPTOR (not supplied).
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
OUTDOOR ANTENNA CONNECTION
•Use one of the following two diagrams if you connect an outdoor antenna.
A:Using a VHF/UHF combination outdoor antenna.
B:Using separate VHF and/or UHF outdoor antenna.
•Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the
TV set.
A. Combination VHF/UHF Antennas
VHF/UHF ANTENNA
300/75-ohm ADAPTOR (not supplied)
|
or |
300-ohm |
VHF/UHF |
twin-lead |
|
|
|
|
ANTENNA |
|
|
75-ohm coaxial cable
REAR OF TV
B. Separate VHF/UHF Antenna
REAR OF TV
VHF UHF
ANTENNA ANTENNA
300-ohm twin-lead
COMBINER
|
300-ohm (not supplied) |
|
|
twin-lead |
|
|
IN OUT |
|
or |
75-ohm coaxial |
|
cable |
||
|
CABLE TV (CATV) CONNECTION
•A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
•Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown, consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/ descrambler using the converter’s channel keys.
|
|
Two-set |
|
A |
|
signal |
|
OUT IN |
|
splitter |
Cable TV Line |
B |
IN |
(not |
|
OUT |
supplied) |
|
|
Cable TV converter/ |
|
|
|
descrambler |
|
|
|
(not supplied) |
|
|
|
Note:
•Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.
6
05-06 32/36R-S400.p65e |
6 |
16/4/01, 11:24 AM |
Quick Reference Control Operation
L Location of Controls
Front Panel
POWER
Press → On.
Press again → Off.
POWER – VOL + |
CH |
MENU 
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
SENSOR AREA FOR
REMOTE CONTROL
(ENGLISH)
VIDEO/AUDIO IN 2 TERMINALS
(VIDEO/AUDIO terminals are also provided on the rear.)
CHANNEL UP/DOWN
(8) Selects next higher channel. (9) Selects next lower channel.
•Press both at the same time to access the MAIN MENU screen.
Basic Remote Control Functions
POWER
Press → On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons, you can program your favorite programs by using the 4 categories A, B, C and D. The channels can be accessed quickly by using these buttons. (See page 32.)
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
•In menu mode, changes or selects the TV adjustments.
MENU
Press →Accesses MAIN MENU. Press again → Exits MAIN MENU.
CATV/DVD-TV/VCR MODE SELECT SWITCH
In TV/VCR position, sends power and channel select commands (Channel up/down and Random Access buttons) to the TV and VCR control.
In CATV/DVD position, sends power and channel select commands to a cable TV converter and DVD control.
DVD/VCR CONTROL
POWER |
|
|
|
TV |
DVD |
DISPLAY |
INPUT |
|
VCR |
||
1 2 3
4 5 6
|
7 |
8 |
9 |
|
|
FLASHBACK |
|
ENTER |
|
|
|
0 |
100 |
|
|
PERSONAL PREFERENCE |
|
||
A |
B |
C |
D |
|
|
VOL |
CH |
VOL |
|
|
|
|
||
|
— |
CH |
+ |
|
|
|
|
|
|
|
MENU |
|
MUTE |
|
|
|
|
CATV |
TV |
|
|
|
DVD |
VCR |
REW PLAY FF
PAUSE STOP REC CH/SKIP
PIP
SWAP FREEZE MOVE SELECT
TV • CATV • VCR • DVD
Infrared Transmitter Window
DISPLAY
Press →Displays receiving channel for four seconds.
Press again → Removes display.
•Temporarily displays receiving channel when in Closed Caption mode.
INPUT
Press → Switch to external video INPUT 1 mode.
Press 2 times →Switch to external video INPUT 2 mode.
Press 3 times → Switch back to the original TV mode.
See page 37.
ENTER
Used in some instances where a Cable Converter Box requires an “enter” command after selecting channels, when using the REMOTE KEYPAD button. (See page 39)
CHANNEL UP/DOWN
(8) Selects next higher channel. (9) Selects next lower channel.
•See pages 29 ~ 31 for channel presetting.
•Moves the “ ” mark of the MENU screens.
MUTE
Press → Mutes sound.
Press again → Restores sound.
•CLOSED CAPTION appears when sound is muted.
See page 39.
Note: 
PIP FUNCTION
With the VIDEO inputs, you can watch two pictures at the same time.
See pages 34, 35.
•The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the remote control, place it under a fluorescent light or other lighting.
•The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
•The degree of illumination will vary depending on the strength of lighting used.
•The degree of illumination will decrease with time and depending on the temperature.
•The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
•Sunlight and fluorescent lighting are the most effective when charging the display.
7
07-09 32/36R-S400.p65e |
7 |
16/4/01, 11:24 AM |
Referencia rápida de los controles de operación
L Ubicación de los controles |
(ESPAÑOL) |
Panel Delantero
ALIMENTACION (POWER)
Pulsando → Enciende (On).
Pulsando nuevamente →
Apaga (Off).
POWER – VOL + |
CH |
|
MENU |
AUMENTO/DISMINUCION |
|
DEL VOLUMEN (VOL) |
|
(+) Aumenta el sonido. |
|
(–) Disminuye el sonido. |
ZONA DEL SENSOR DEL |
|
MANDO A DISTANCIA |
Funciones Basicas Del Control Remoto
TERMINALES DE ENTRADA VIDEO/
AUDIO IN 2
(Los terminales VIDEO/AUDIO también se encuentran en la parte posterior)
CANAL SUPERIOR/INFERIOR (CH) – MENU
(8) Selecciona el siguiente canal superior. (9) Selecciona el siguiente canal inferior.
•Pulse ambos al mismo tiempo para acceder a la pantalla de MENU PRINCIPAL.
ALIMENTACION (POWER)
Pulsando → Enciende (On). Pulsando nuevamente →Apaga (Off).
TECLADO A DISTANCIA (REMOTE KEYPAD)
Para tener acceso a cualquier canal empleando las teclas.
RETORNO AL CANAL
ANTERIOR (FLASHBACK)
Para volver al canal anterior.
PREFERENCIAS PERSONALES
Con los botones Personal Preference puede programar sus programas favoritos utilizando las cuatro categorías A, B, C y D.
Puede acceder a los canales rápidamente utilizando estos botones.
AUMENTO/DISMINUCION DEL VOLUMEN (VOLUME UP/DOWN)
(+) Aumenta el sonido.
(–) Disminuye el sonido.
•En modo de MENU cambia o selecciona el ajuste del televisor.
PREPARACION (MENU)
Pulsando → Accede al MENU PRINCIPAL.
Pulsando nuevamente → Sale del MENU PRINCIPAL.
CONMUTADOR SELECTOR DE TELEVISOR/TV POR CABLE (TV-CATV)
En la posición TV, el mando envia los comandos de alimentación y selección de canales (botones de canal superior/inferior y de acceso aleatorio) a un televisor.
En la posición CATV, envia los comandos de alimentación y selección de canales a un convertidor de TV por cable.
Note:
POWER |
|
|
|
TV |
DVD |
DISPLAY |
INPUT |
|
VCR |
||
1 2 3
4 5 6
|
7 |
8 |
9 |
|
FLASHBACK |
|
ENTER |
|
|
0 |
100 |
|
PERSONAL PREFERENCE |
||
A |
B |
C |
D |
|
VOL |
CH |
VOL |
|
|
||
—+
CH
MENU |
MUTE |
CATV TV
DVD VCR
REW PLAY FF
PAUSE STOP REC CH/SKIP
PIP
SWAP FREEZE MOVE SELECT
TV • CATV • VCR • DVD
Ventanilla del transmisor de infrarrojos
VISUALIZACION (DISPLAY)
Pulsando → Aparece el canal de recepción por cuatro segundos. Pulsando nuevamente → Elimina la visualización.
•En el modo de “Closed Caption” se muestra el canal de recepción por un corto tiempo.
ENTRADA (INPUT)
Pulsando → Cambia al modo de entrada 1 del vídeo externo.
Pulsando 2 veces → Cambia al modo de entrada 2 del vídeo externo.
Pulsando 3 veces → Vuelve al modo TV original.
INTRODUCIR (ENTER)
Se utiliza en algunos casos en los cuales una Caja de Inversor de Cable requiere una orden “enter” después de seleccionar los canales, al usar el teclado a distancia.
CANAL SUPERIOR/INFERIOR (CHANNEL UP/DOWN)
(8) Selecciona el siguiente canal superior. (9) Selecciona el siguiente canal inferior.
•En el modo de MENU, mueve la marca “ ”.
SILENCIAMIENTO (MUTE)
Pulsando → Silencia el sonido. Pulsando nuevamente → Restaura el sonido.
•CLOSED CAPTION aparece automáticamente cuando el sonido es silenciado. Siempre y cuando la transmisión tenga esta señal.
CONTROLES DEL DVD/VIDEO
IMAGEN EN IMAGEN (FUNCTION PIP)
Con las entradas VIDEO, se puede ver dos imágenes al mismo tiempo.
•Los botones que arriba pueden verse sombreados en el Control Remoto lucen en la oscuridad. Para usar el visor del control remoto que luce en la oscuridad, colocarlo bajo una luz fluorescente u otra fuente luminosa.
•El material fosforescente no contiene elementos radiactivos ni tóxicos, de modo que su uso no representa ningún peligro.
•El grado de iluminación variará de acuerdo con la potencia de la luz utilizada.
•El grado de iluminación irá decayendo con el tiempo y dependiendo de la temperatura.
•El tiempo necesario para cargar el visor fosforescente variará de acuerdo con la iluminación circundante.
•La luz del sol y la luz fluorescente son las más eficaces para la carga del visor.
8
07-09 32/36R-S400.p65e |
8 |
16/4/01, 11:24 AM |
Référence rapide sur les commandes
L Emplacement des touches
Panneau Avant
ALIMENTATION (POWER) |
|
|
Appuyer pour mettre sous |
|
|
tension. |
|
|
Appuyer de nouveau pour |
|
|
mettre hors tension. |
POWER – VOL + |
CH |
AUGMENTATION/RÉDUCTION |
|
MENU |
|
|
|
DU VOLUME SONORE (VOL) |
|
|
(+) Pour augmenter le volume du |
|
|
son. |
|
ZONE DE DETECTION |
(–) Pour diminuer le volume du |
|
|
|
DU CAPTEUR |
|
son. |
|
|
|
|
(FRANÇAIS)
PRISES D’ENTRÉE
VIDÉO/AUDIO IN 2
(Les prises VIDÉO/AUDIO sont également reprises à l’arrière.)
TOUCHES DES CANAUX CROISSANT/ DÉCROISSANT (CH) – MENU
(8) Sélectionne le canal supérieur suivant.
(9) Sélectionne le canal inférieur précédent.
•Appuyez simultanément sur ces deux touches pour accéder à l’écran MENU PRINCIPAL.
Fonctions de base de la télécommande
ALIMENTATION (POWER)
Appuyer pour mettre sous tension. Appuyer de nouveau pour mettre hors tension.
PAVE NUMERIQUE DE COMMANDE A DISTANCE (REMOTE KEYPAD)
Sélectionne directement le canal voulu sur le pavé numérique.
RETOUR (FLASHBACK)
Rappelle le canal regardé précédent.
PREFERENCES PERSONNELLES
Grâce aux touches de préférence personnelle, vous pouvez programmer vos programmes préférés à l’aide des 4 catégories:
A, B, C et D. Ces touches vous permettent d’accéder rapidement à ces canaux.
AUGMENTATION/RÉDUCTION DU VOLUME SONORE (VOLUME UP/DOWN)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
•Pour changer ou sélectionner les réglages du téléviseur en mode menu.
RÉGLAGE (MENU)
Appuyer → Accès au MENU PRINCIPAL. Appuyer de nouveau → Sortie du MENU PRINCIPAL.
SÉLECTEUR DE MODE DE CÂBLOVISION/DVD-TÉLÉVISION/ MAGNÉTOSCOPE (CATV/DVD-TV/VCR)
En position télévision/magnétoscope (TV/VCR), permet de mettre le téléviseur et le magnétoscope sous/hors tension et de
sélectionner ses canaux (touche de canaux en ordre croissant/décroissant et d’accès direct). En position câblovision/DVD (CATV/DVD), permet de mettre un convertisseur de téléviseur par câble et un lecteur de DVD sous/hors tension et de sélectionner ses canaux.
Remarque: 
POWER |
|
|
|
TV |
DVD |
DISPLAY |
INPUT |
|
VCR |
||
1 2 3
4 5 6
|
7 |
8 |
9 |
|
FLASHBACK |
|
ENTER |
|
|
0 |
100 |
|
PERSONAL PREFERENCE |
||
A |
B |
C |
D |
|
VOL |
CH |
VOL |
|
|
||
—+
CH
MENU |
MUTE |
CATV TV
DVD VCR
REW PLAY FF
PAUSE STOP REC CH/SKIP
PIP
SWAP FREEZE MOVE SELECT
TV • CATV • VCR • DVD
Fenêtre d’émission du signal infrarouge
AFFICHAGE (DISPLAY)
Appuyer pour afficher le canal reçu pendant quatre secondes.
Appuyer de nouveau pour faire disparaître le canal.
•Pour afficher temporairement le canal reçu en mode Sous-titres.
ENTRÉE (INPUT)
Appuyer pour sélectionner le mode ENTRÉE 1 vidéo externe.
Appuyer 2 fois pour sélectionner le mode ENTRÉE 2 vidéo externe. Appuyer 3 fois pour revenir au mode TV initial.
ENTRER (ENTER)
Parfois utilisée lorsqu’un convertisseur nécessite l’introduction d’une commande “enter” après la sélection de canaux à l’aide du pavé numérique de commande à distance.
TOUCHES DES CANAUX CROISSANT/ DÉCROISSANT (CHANNEL UP/DOWN)
(8) Sélectionne le canal supérieur suivant. (9) Sélectionne le canal inférieur précedént.
• Déplace le curseur “ ” sur l’écran du MENU.
SOURDINE (MUTE)
Appuyer → Mise en sourdine du son. Appuyer de nouveau → Rétablissement du son.
•CLOSED CAPTION apparaît lorsque le son est mis en sourdine.
COMMANDE DU LECTEUR DE DVD/ MAGNÉTOSCOPE
IMAGE DANS L’IMAGE (FUNCTION PIP)
Avec les entrées VIDEO, vous pouvez regarder deux images en même temps
•Les boutons ombrés de la télécommande illustrés ci-dessus brillent dans l’obscurité lorsque la télécommande a été placée sous une ampoule fluorescente ou toute autre source lumineuse.
•Le matériau phosphorescent n’est absolument pas toxique ou radioactif. Il peut donc être utilisé en toute sécurité.
•Le degré d’illumination variera en fonction de l’intensité de la source d’éclairage.
•Le degré d’illumination diminuera avec le temps, en fonction de la température.
•Le temps requis pour charger les touches phosphorescentes dépendra de l’éclairage environnant.
•Les rayons directs du soleil et les luminaires fluorescents constituent les meilleures sources de chargement des touches phosphorescentes.
9
07-09 32/36R-S400.p65e |
9 |
16/4/01, 11:24 AM |
EZ SETUP during First Use
LWhen you turn on the TV for the first time, it will automatically memorize the broadcasting channels.
Please perform the following instructions before you press the power button.
(1)Insert the batteries into the remote control. (See page 5)
(2)Connect the antenna cable to the TV set. (See page 5 ~ 6)
(3)Plug in the AC POWER cord to the wall outlet.
POWER |
|
|
|
POWER |
|
TV |
DVD |
DISPLAY |
INPUT |
||
|
VCR |
|
|||
|
1 |
2 |
|
3 |
|
|
4 |
5 |
|
6 |
VOLUME |
|
7 |
8 |
|
9 |
(+)/(–) |
|
|
|
|||
FLASHBACK |
|
ENTER |
|
||
|
|
0 |
100 |
|
|
PERSONAL PREFERENCE |
|
||||
A |
B |
C |
|
D |
CHANNEL |
|
|
CH |
|
|
|
VOL |
|
|
VOL |
UP (8)/ |
|
— |
|
CH |
|
+ |
|
|
|
|
|
DOWN (9) |
|
MENU |
|
|
MUTE |
||
|
|
|
|||
CATV |
TV |
MENU |
DVD |
VCR |
|
1 Press the POWER button on the TV set or on the Remote Control to turn on the TV. The SELECT LANGUAGE mode will be
displayed.
(On the Set)
POWER
S E L E C T L A NGU AGE
E NG L I S H
E S P A ÑO L F R A NC A I S
S E L E C T : C H8 / 9 S E T : V O L + / –
(SELECT LANGUAGE mode)
2 Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH (ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
CH
CH
S E L E C T L A NGU A G E
E NG L I S H
E S P A ÑO L F R A N C A I S
S E L E C T : C H8 / 9 S E T : V O L + / –
3 Press VOL (+) or (–) to access EZ SETUP mode.
|
CON N E C T A N T E N N A |
|
|
OR |
C A B L E . |
|
S T A R T E Z S E T U P ? |
|
VOL |
VOL |
Y E S : V O L + |
— |
+ |
|
NO : V O L –
|
|
|
(EZ SETUP mode) |
|
|
|
|
4 |
Press VOL (+). |
|
|
|
The tuner will automatically search for the |
|
P L E A S E WA I T |
|
broadcasting and cable TV channels. (The CH No. |
|
A U T O P ROGR AMM I NG |
|
will automatically increase when it appears.) |
|
|
|
|
|
|
|
If you want to stop the EZ SETUP process once it |
VOL |
1 8 |
|
has started, press VOL (–) and it will be canceled. |
+ |
|
|
|
S T O P : V O L – |
|
|
If you want to SETUP again, please refer to page |
|
|
|
28 on SETUP. |
|
|
|
To cancel EZ SETUP |
|
|
|
Press VOL (–). |
|
|
|
|
|
|
5 |
Once EZ SETUP is completed, the lowest channel number |
|
|
|
memorized will be displayed. |
|
2 |
|
|
|
|
Note:
•If EZ SETUP does not memorize all the channels in your region, please refer to page 29 for more information on manually memorizing the channels using CHANNEL SETTING.
•It may be difficult to PRESET when the broadcasting signals are weak, the channel cycle frequency is incorrect or the frequency jamming is occuring around the area. Please refer to pages 29 ~ 31 for
more information on manually memorizing the channels using CHANNEL SETTING.
10
10-11 32/36R-S400.p65e |
10 |
16/4/01, 11:25 AM |
Demo Mode
•To quickly learn more about the TV set, press and hold for more than three seconds both CH UP (8) and DOWN (9) on the TV set. The TV set will go into DEMO mode and briefly explain the various features.
•To cancel DEMO mode, again press both CH UP (8) and DOWN (9) on the TV set.
Example:
DEMO mode display
From SHARP Minds
Come SHARP Products
(On the Set)
CH
MENU 
CHANNEL UP (8)/ DOWN (9) buttons
Accessing the MAIN MENU screen without Remote Control
•If you misplaced your Remote Control you can still access most settings via the MAIN MENU screen when you press both CH UP (8) and DOWN (9) on the TV set.
•Some features of your TV set will not be accessible without the Remote
Control. If you lost your Remote Control, contact a Sharp Service Center for a replacement.
(On the Set)
CH
MENU 
CHANNEL UP (8)/ DOWN(9) buttons
11
10-11 32/36R-S400.p65e |
11 |
16/4/01, 11:25 AM |
Language
L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH. L Setting the ON SCREEN DISPLAY Language.
1 Press MENU to access MAIN MENU screen.
T I ME R
V I D E O A D J U S T A U D I O S E L E C T
C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E
S E T U P
(MAIN MENU screen)
2 Press CH UP (8) or DOWN (9) to move the “
” mark to “SET UP”.
CH
CH
T I ME R
V I D E O A D J U S T A U D I O S E L E C T
C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E
S E T U P
3 Press VOL (+) or (–) to access SET UP mode, then press CH UP (8) or DOWN (9) to move the “
” mark to “LANGUAGE”.
— |
+ |
→ |
CH |
VOL |
VOL |
|
|
CH
B L U E S C R E E N
P E R S ON A L P R E F . U N I V E R S A L P L U S
L A NGU A G E
C H S E T T I NG
(SET UP mode)
4 Press VOL (+) or (–) to access LANGUAGE change mode.
VOL |
VOL |
— |
+ |
L A NGU A G E
E NG L I S H E S P A ÑO L F R A N C A I S
(LANGUAGE change mode)
5 Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
CH
CH
I D I OMA
E NG L I S H
E S P A ÑO L 
F R A N C A I S
6 Press MENU to exit.
Sleep Timer
L You can set the number of minutes for your TV to automatically turn off.
1 Press MENU to access MAIN MENU screen.
2 Press VOL (+) or (–) to access TIMER SET mode.
→
VOL VOL
—+
T I MER
V I D E O A D J U S T A U D I O S E L E C T
C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E
S E T U P
(MAIN MENU screen)
3 Press VOL (+) or (–) to set a sleep time of 30, 60, 90 or 120 minutes.
4 Press MENU to exit.
— |
+ |
→ |
VOL |
VOL |
|
Note:
S L E E P T I ME R
1 2 0 R EMA I N
(TIMER SET mode)
•To turn off the Sleep Timer, repeat the above SLEEP TIMER steps and select “– – – REMAIN” during step 3.
•While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular
intervals or when the remote’s Display key is pressed.
12
12-13 32/36R-S400.p65e |
12 |
16/4/01, 11:29 AM |
Video Adjust
Description of Adjustment Items
Selected |
VOL UP (+) button |
VOL DOWN (–) button |
item |
|
|
|
|
|
PICTURE |
To increase contrast |
To decrease contrast |
|
|
|
TINT |
To make skin tones greenish |
To make skin tones purplish |
COLOR |
To increase color intensity |
To decrease color intensity |
|
|
|
BRIGHT |
To increase brightness |
To decrease brightness |
|
|
|
SHARP |
To increase sharpness |
To decrease sharpness |
|
|
|
COLOR |
To choose a LOW, ML, MH or HIGH COLOR TONE. |
|
TEMP. |
|
|
|
|
|
RESET |
To return all adjustments to factory preset levels. |
|
|
|
|
PERSONAL PREFERENCE
A |
B |
C |
D |
|
VOL |
CH |
VOL |
|
|
—+
CH
MENU |
MUTE |
CATV |
TV |
DVD |
VCR |
VOLUME (+)/(–)
CHANNEL UP (8)/ DOWN (9)
MENU
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “
” mark to “VIDEO ADJUST”.
→ CH
CH
T I ME R
V I D E O A D J U S T A U D I O S E L E C T
C L O S E D C A P T I ON P A R E N T CON T RO L E N E RG Y S A V E
S E T U P
(MAIN MENU screen)
3 Press VOL (+) or (–) to access PICTURE adjust mode.
VOL |
VOL |
|
|
|
P I C T U R E |
5 0 |
||||||||||
— |
+ |
|
|
|
||||||||||||
– |
|
|
|
|
|
|
|
|
|
|
|
|
|
+ |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
(PICTURE adjust mode)
4 Press CH UP (8) or DOWN (9) to select the desired mode. (Refer to the diagram below.)
PICTURE |
|
|
|
|
TINT |
|
|
|
|
COLOR |
|
|
|
|
BRIGHT |
CH |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RESET |
|
|
|
|
COLOR TEMP. |
|
|
|
|
SHARP |
CH |
|||||||||||
|
|
|
|
|
|
|
|
|||||||||||||||
|
|
: CH UP (8) |
|
|
: CH DOWN (9) |
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|||||||||||||||
5 Press VOL (+) or (–) to adjust the setting.
VOL |
VOL |
|
— |
+ |
P I C T U R E 5 0 |
– |
+ |
VOL UP (+) increase contrast
VOL DOWN (–) decrease contrast
6 Repeat steps 4 to 5 to adjust other settings.
7 Press MENU to exit.
13
12-13 32/36R-S400.p65e |
13 |
16/4/01, 11:29 AM |
Audio Select
LMTS (MULTI CHANNEL TV SOUND)
This circuit allows reception of stereo or bilingual TV sound.
LINTERNAL SPEAKER SWITCH
This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from external speakers by using the AUDIO OUTPUT JACKS on page 38.
LFAO
This function turns the TV’s internal speakers “OFF” and allows fixed audio output from the AUDIO OUTPUT JACKS on page 38. With FAO on the TV’s volume control is disabled.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ 
” mark to “AUDIO SELECT”.
→ CH
CH
T I ME R
V I D EO A D J U S T A UD I O S E L E C T
C L OS E D C A P T I ON P A R E N T CON T RO L E N E RGY S A V E
S E T U P
(MAIN MENU screen)
3 Press VOL (+) or (–) to access AUDIO SELECT mode.
4 Press CH UP (8) or DOWN (9) to move the “ 
” mark to “MTS”, “SPEAKER” or “FAO”.
— |
+ |
→ |
CH |
VOL |
VOL |
|
|
|
|
|
CH |
A UD I O S E L E C T
MT S |
: S A P |
S P E A K E R |
: ON |
F AO |
: O F F |
(AUDIO SELECT mode)
5 Press VOL (+) or (–) to select “STEREO”, “SAP” or “MONO” when the “ 
” mark is at “MTS” position.
MTS |
SPEAKER |
FAO |
|
|
||||||||
STEREO |
|
|
ON |
|
|
ON |
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
VOL |
VOL |
|
|
|
|
|
|
|
|
|
|
|
||
|
SAP |
|
|
OFF |
|
|
OFF |
— |
+ |
|||
|
|
|
|
|
|
|
||||||
MONO
A UD I O S E L E C T
MT S |
: S T E R EO |
S P E A K E R : O F F |
|
F AO |
: ON |
(AUDIO SELECT mode)
6 Press MENU to exit.
Ex: Actual screen indicating ON AIR when receiving STEREO broadcasts |
|
|
|
|
|
|
|
|||
Actual channel number |
|
|
|
|
|
1 2 |
||||
|
|
|
|
|
||||||
“← ON AIR” will appear next to STEREO or |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|||
SAP when receiving STEREO or SAP |
T E R E O |
ON |
A I R |
|||||||
broadcasts. |
||||||||||
S A P |
ON |
A I R |
||||||||
MONO
(CHANNEL call on screen)
14
14-15 32/36R-S400.p65e |
14 |
16/4/01, 11:30 AM |
Audio Select (Continued)
LYou can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
•Stereo broadcasts
Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo sound.
•SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
LIf stereo sound is difficult to hear.
•You can obtain clearer sound by manually switching to fixed monaural mode.
Note:
•Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
•Selecting MTS while in the INPUT mode does not change the type of sound; in this case, sound is determined by the video source.
•If “FAO” mode is select “ON”, “SPEAKER” will automatically turn “OFF”.
“SPEAKER” selecting will not affect “FAO” mode.
15
14-15 32/36R-S400.p65e |
15 |
16/4/01, 11:30 AM |
Loading...