SHANGHAI SUNRISE ELECTRONICS 1.5KE91CA, 1.5KE91C, 1.5KE91, 1.5KE9.1A, 1.5KE82A Datasheet

...

SHANGHAI SUNRISE ELECTRONICS CO., LTD.

)

(BR)

1.5KE6.8 THRU 1.5KE440CA

TRANSIENT VOLTAGE SUPPRESSOR

BREAKDOWN VOLTAGE:6.8-440V

PEAK PULSE POWER: 1500W

TECHNICAL

SPECIFICATION

FEATURES

DO-201AE

• 1500W peak pulse power capability

• Excellent clamping capability

• Low incremental surge resistance

• Fast response time: typically less than 1.0ps from 0V to V

for unidirectional and 5.0nS for bidirectional types.

• High temperature soldering guaranteed:

265

C/10S/9.5mm lead length at 5 lbs tension

MECHANICAL DATA

• Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C

• Case: Molded with UL-94 Class V-O recognized flame retardant epoxy

• Polarity: Color band denotes cathode except for unidirectional types.

Dimensions in inches and (millimeters)

• Mounting position: Any

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

(Ratings at 25oC ambient temperature unless otherwise specified)

RATINGS

Peak power dissipation (Note 1) Peak pulse reverse current (Note 1) Steady state power dissipation (Note 2) Peak forward surge current (Note 3) Maximum instantaneous forward voltage at 50A for unidirectional only (Note 4) Operating junction and storage temperature range

Notes:

1. 10/1000

2. Tl=75

3. Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.

4. V

DEVICES FOR BIDIRECTIONAL APPLICATIONS

1. Suffix 'A' dnotes 5% tolerance device,no suffix 'A' dnotes 10% tolerance device.

2. For bidirectional use 'C' or 'CA' suffix for types 1.5KE6.8 thru types 1.5KE440A (e.g. 1.5KE7.5C,1.5KE440CA), for unidirectional don't use 'C' suffix after types.

3. For bidirectional devices having V

4. Electrical characteristics apply in both directions.

=3.5V max. for devices of V

S waveform non-repetitive current pulse, and derated above Ta=25oC

C, lead length 9.5mm, Mounted on copper pad area of (20×20mm

200V, and VF=5.0V max. for devices of V

of 10 volts and less, the ID limit is doubled.

SYMBOL VALUE UNITS

ppm

m(av)

FSM

STG,TJ

ppm

Minimum 1500 W

See Table A

5.0 W

200 A

3.5/5.0 V

-55 to + 175

>200V

http://www.sse-diode.com

ELECTRICAL CHARACTERISTICS

( at TA=25oC unless otherwise noted )

JEDEC

TYPE

NUMBER

1N6267 1.5KE6.8 1N6267A 1.5KE6.8A 1N6268 1.5KE7.5 1N6268A 1.5KE7.5A 1N6269 1.5KE8.2 1N6269A 1.5KE8.2A 1N6270 1.5KE9.1 1N6270A 1.5KE9.1A 1N6271 1.5KE10 1N6271A 1.5KE10A 1N6272 1.5KE11 1N6272A 1.5KE11A 1N6273 1.5KE12 1N6273A 1.5KE12A 1N6274 1.5KE13 1N6274A 1.5KE13A 1N6275 1.5KE15 1N6275A 1.5KE15A 1N6276 1.5KE16 1N6276A 1.5KE16A 1N6277 1.5KE18 1N6277A 1.5KE18A 1N6278 1.5KE20 1N6278A 1.5KE20A 1N6279 1.5KE22 1N6279A 1.5KE22A 1N6280 1.5KE24 1N6280A 1.5KE24A 1N6281 1.5KE27 1N6281A 1.5KE27A 1N6282 1.5KE30 1N6282A 1.5KE30A 1N6283 1.5KE33 1N6283A 1.5KE33A 1N6284 1.5KE36 1N6284A 1.5KE36A 1N6285 1.5KE39 1N6285A 1.5KE39A 1N6286 1.5KE43 1N6286A 1.5KE43A 1N6287 1.5KE47 1N6287A 1.5KE47A 1N6288 1.5KE51 1N6288A 1.5KE51A 1N6289 1.5KE56 1N6289A 1.5KE56A

GENERAL

PART

NUMBER

Breakdown

Voltage

(Volts)

(BR)

(NOTE 1)

Test

Current

(mA)

MIN MAX

6.12 7.48 10.0 5.50 1000 139.0 10.8 0.057

6.45 7.14 10.0 5.80 1000 143.0 10.5 0.057

6.75 8.25 10.0 6.05 500 128.0 11.7 0.061

7.13 7.88 10.0 6.40 500 132.0 11.3 0.061

7.38 9.02 10.0 6.63 200 120.0 12.5 0.065

7.79 8.61 10.0 7.02 200 124.0 12.1 0.065

8.19 10.0 1.0 7.37 50 109.0 13.8 0.068

8.65 9.55 1.0 7.78 50 112.0 13.4 0.068

9.00 11.0 1.0 8.10 10 100.0 15.0 0.073

9.50 10.5 1.0 8.55 10 103.0 14.5 0.073

9.90 12.1 1.0 8.92 5.0 93.0 16.2 0.075

10.5 11.6 1.0 9.40 5.0 96.0 15.6 0.075

10.8 13.2 1.0 9.72 5.0 87.0 17.3 0.078

11.4 12.6 1.0 10.2 5.0 90.0 16.7 0.078

11.7 14.3 1.0 10.5 5.0 79.0 19.0 0.081

12.4 13.7 1.0 11.1 5.0 82.0 18.2 0.081

13.5 16.5 1.0 12.1 5.0 68.0 22.0 0.084

14.3 15.8 1.0 12.8 5.0 71.0 21.2 0.084

14.4 17.6 1.0 12.9 5.0 64.0 23.5 0.086

15.2 16.8 1.0 13.6 5.0 67.0 22.5 0.086

16.2 19.8 1.0 14.5 5.0 56.5 26.5 0.088

17.1 18.9 1.0 15.3 5.0 59.5 26.2 0.088

18.0 22.0 1.0 16.2 5.0 51.5 29.1 0.090

19.0 21.0 1.0 17.1 5.0 54.0 27.7 0.090

19.8 24.2 1.0 17.8 5.0 47.0 31.9 0.092

20.9 23.1 1.0 18.8 5.0 49.0 30.6 0.092

21.6 26.4 1.0 19.4 5.0 43.0 34.7 0.094

22.8 25.2 1.0 20.5 5.0 45.0 33.2 0.094

24.3 29.7 1.0 21.8 5.0 38.0 39.1 0.096

25.7 28.4 1.0 23.1 5.0 40.0 37.5 0.096

27.0 33.0 1.0 24.3 5.0 34.5 43.5 0.097

28.5 31.5 1.0 25.6 5.0 36.0 41.4 0.097

29.7 36.3 1.0 26.8 5.0 31.5 47.7 0.098

31.4 34.7 1.0 28.2 5.0 33.0 45.7 0.098

32.4 39.6 1.0 29.1 5.0 29.0 52.0 0.099

34.2 37.8 1.0 30.8 5.0 30.0 49.9 0.099

35.1 42.9 1.0 31.6 5.0 26.5 56.4 0.100

37.1 41.0 1.0 33.3 5.0 28.0 53.9 0.100

38.7 47.3 1.0 34.8 5.0 24.0 61.9 0.101

40.9 45.2 1.0 36.8 5.0 25.3 59.3 0.101

42.3 51.7 1.0 38.1 5.0 22.2 67.8 0.101

44.7 49.4 1.0 40.2 5.0 23.3 64.8 0.101

45.9 56.1 1.0 41.3 5.0 20.4 73.5 0.102

48.5 53.6 1.0 43.6 5.0 21.4 70.1 0.102

50.4 61.8 1.0 45.4 5.0 18.6 80.5 0.103

53.2 58.8 1.0 47.8 5.0 19.5 77.0 0.103

Stand-

off

Voltage

(Volts)

Maximum

Reverse

Leakage at

ID(µA)

(NOTE3)

Maximum

Peak Pulse

Reverse

Current

Ippm

(Amps)

(NOTE 2)

Maximum Clamping

Voltage at

Ippm

Vc(Volts)

Maximum

Temperature

Coefficient

of V

(BR)

(%/oC)

http://www.sse-diode.com

+ 1 hidden pages