Ses PSM 15-6, PSM 15-12, PSM 10-4 User Manual

PSM 10/12/15 Series

Installation manual

Ver.1.02 Oct. 2019

Esoltech AB, the battery

company

TABLE OF CONTENTS

Warning ............................................................. 3

1. List of components ..................................... 4

2. Cabinet Assembly ...................................... 6

2.1 Wall mounting: ...................................... 7

2.2 Removing the side panels .................... 8

2.3 Adjusting the feet .................................. 9

2.4 Cable for LED panel ........................... 10

3. Battery and Controller modules ............... 11

3.1 Touch Protection Covers .................... 12

3.2 Insert the battery modules .................. 14

3.3 Cable Installation ................................ 16

4. ESO module ............................................. 20

4.1 ESO assembly .................................... 20

4.2 Insert the ESO .................................... 22

4.3 Cable installation................................. 22

5. External cable .......................................... 24

5.1 DC-Link cable ..................................... 25

5.2 AC cable .............................................. 27

5.3 Cable gland ......................................... 28

6. Final Check and Finishing up .................. 29

6.1 Jumper bricks ...................................... 29

6.2 Finishing up ......................................... 30

7. More information ...................................... 32

7.1 Trouble shooting ................................. 32

7.2 Datasheet ............................................ 34

PSM 10/12/15 Series Installation manual

Esoltech AB, the battery company

May 1, 2019 3

WARNING

• Read through the instruction manual before installation.

• Electrical installation shall be performed by an authorized electrician in accordance with

electrical standards and safety precautions

• Some component may need to be assembled before electrical installation.

• Do not open the enclosure of the electrical components. Warranty is void if the products

has been modified.

• Plug in the jumper brick (battery modules) only when the system is ready to power up.

The FerroAmp PSM 10/12/15 series high performance energy storage system is designed to be installed and operated together with the EnergyHub system with the patented Adaptive Current Equalization (ACE) technology.

FerroAmp Ferroamp Elektronik AB is a research-driven platform company that builds smart integrated energy system for home and industry. The FerroAmp ACE technology is patented under PCT WO2012050501 (A1).

SES Sunwoda Energy Solution Co., Ltd is a professional energy storage solution provider with 20 years’ know- how in battery industry. SES is a subsidiary of the listed Sunwoda Electronic Co., Ltd (SZ 300207) established in 1997. SES is a manufacture powerhouse with it headquarter in Shenzhen, China.

ESOL ESOLtech AB, the battery company, is based in Stockholm. A company of doer brings knowledge into reality.

PSM 10/12/15 Series Installation manual

Esoltech AB, the battery company

May 1, 2019 4

1. LIST OF COMPONENTS

The PSM 10/12/15 series high performance energy storage system comes with the following components:

• Cabinet

• Battery modules

• Battery controller modules

• Energy Storage Optimizer (ESO)

• Accessories box

Knowing your system components:

Battery module

4 pcs (PSM10) 5 pcs (PSM12) 6 pcs (PSM15)

Battery controller module

1 pcs

Energy storage optimizer

1 pcs (6kW, PSM10) 2 pcs (12kW, PSM12/15)

The Cabinet

see picture on the index page

The Accessories box

see the list of accessories

PSM 10/12/15 Series Installation manual

Esoltech AB, the battery company

May 1, 2019 5

List of accessories:

Item no.

Description

quantity

note

Installation manual

This manual

Battery Module Comm. Cable

Battery Module Power cable

Battery Module Jumper Brick

Battery Module Mounting Bolts

M 5

Wall mounting bolts

Wall mounting assembly

Wall mounting assembly bolts

Power Cable ESO - Battery controller

Battery controller Power cable 230VAC

Comm. cable: from ESO to Battery controller

Grounding cable for ESO

ESO Adaptor 1

ESO Adaptor fixing bolts

ESO front panel

ESO front panel fixing bolts

PSM 10/12/15 Series Installation manual

Esoltech AB, the battery company

May 1, 2019 6

2. CABINET ASSEMBLY

The cabinet is pre-assembled. The PSM cabinet is designed to be installed and used indoor only. Before installation, please make sure that:

• the ambient temperature is 0 – 45 deg. (recommended 25 deg.);

• the relative humidity ranges 0-95%;

• there is enough space around the cabinet to enable a safe installation.

Note: the measurement in the diagram is not to the scale

PSM 10/12/15 Series Installation manual

Esoltech AB, the battery company

May 1, 2019 7

2.1 Wall mounting:

Clear the wall. Measure the distance from the floor to the spot on the wall where mounting assembly shall be fixed.

• Figure A: The wall mounting assembly can be attached to 3 locations on the cabinet. The cabinet is shipped with the assembly preinstalled at location 1.

• Figure B: Fix the wall mounting piece to the wall.

• Figure C: Move the cabinet to the wall and fasten the fixing bolts to make sure the

cabinet is secured.

Please refer to Section 2.3 for the adjustment of the feet.

z o o m i n

wall mounting assembly

PSM 10/12/15 Series Installation manual

Esoltech AB, the battery company

May 1, 2019 8

2.2 Removing the side panels

The cabinet has a symmetric design meaning that the panels on the left-hand-side are identical and exchangeable to the ones on the right.

The diagram shows the upper side panels and one of the lower side panels are removed. Detach the grounding cable for installation clearance. The following shows the details of removing the grounding cables.

PSM 10/12/15 Series Installation manual

Esoltech AB, the battery company

May 1, 2019 9

2.3 Adjusting the feet

There are 4 adjustable feet and the sockets are accessible when removing the side panels. Using the hex key (5mm) to adjust the height of the feet.

PSM 10/12/15 Series Installation manual

Esoltech AB, the battery company

May 1, 2019 10

2.4 Cable for LED panel

Connecting the LED cable to the LED connector socket inside the cabinet as indicated below:

There is only one direction the cable can be inserted firmly. The following picture shows finished LED cable connection. The other end of the cable is to be connected to the battery controller module (See also Section 3.2).

LED Cable

(to the LED panel) (to battery controller module)

PSM 10/12/15 Series Installation manual

Esoltech AB, the battery company

May 1, 2019 11

3. BATTERY AND CONTROLLER MODULES

Both the battery module and the battery controller box are shipped with protection covers preinstalled.

Battery module:

Battery controller box:

The PSM system is shipped with one battery controller module and 4 - 6 battery modules depending on system configuration.

Make sure to remove the preinstalled protection cover before installation.

cover

cover 2cover 3

Transparent piece

(click-on)

Black piece

(screw-fixed)

Touch Protection Cover

(black)

+ 23 hidden pages