Sennheiser K6, K 6-P, K6-PC, K6-CL User Manual

0 (0)
GEBRAUCHSANLEITUNG INSTRUCTIONS FOR USE NOTICE D‘EMPLOI ISTRUZIONI PER L‘USO INSTRUCCIONES PARA EL USO GEBRUIKSAANWIJZING
K6 / K6-CL K6-P / K6-PC
SYSTEM K6SYSTEM K6

Speiseadapter K6 / K6 P

+
Mit den Speiseadaptern K6 und K6P werden die aufschraubbaren Mikrofonmodule des System K6 mit Strom versorgt und an die nachfolgenden Verstärker angepaßt. Der Speiseadapter dient auch als Griffstück. Über die vielfältigen Kombina­tionsmöglichkeiten des Systems K6 informiert die beiliegende Systemübersicht.
Ausführungen K6 Speisedapter für Batterie- und Phantomspeisung.
Schaltbarer Tiefenfilter, Ein-/Ausschalter, Batterie-Test-LED.
K6 P Speisedapter für Anschluß an Phantomspeisung.
Schaltbarer Tiefenfilter, Ein-/Ausschalter.
...-C diese Speiseadapter werden ohne Zubehör geliefert K6-CL Wie K6, aber mit geringerer Empfindlichkeit (-18 dB)
Batteriebetrieb ( K6 )
Batterie einsetzen ( Mignon / LR 6, 1,5 V, Polarität beachten!) und Mikrofonmodul aufschrauben.
Einschalten, dabei Batterie-Test durchführen. Blitzt die LED hell auf, ist die Batterieleistung ausreichend. Glimmt die LED nur schwach,
Batterie umgehend erneuern!
Unnötigen Stromverbrauch vermeiden - nach Gebrauch ausschalten.
Bei Phantomspeisung wird automatisch der Batteriebetrieb ausgeschaltet.
Betrieb mit Phantomspeisung ( K6 P )
Der Speiseadapter K6P bezieht die Versorgung für die Mikrofonmodule nur über die Anschlußleitung (Phantomspeisung).
2
Wirkung des Tiefenfilters B:

Trittschallfilter

Der Tiefenfilter B unterdrückt optimal Störungen durch Körperschall, Trittschall, Windgeräusch und Popgeräusche.
Technische Daten K6 (k6P)
Elektrische Impedanz ca. 200 sym, ca. 100 asym. Empfohlene Abschlußimpedanz > 1 k Übertragungsfaktor 0 dB (K6-CL –18 dB) max. Leerlaufausgangsspannung 2 V (entspricht 6 dBV) Ausgang symmetrisch transformatorlos Phantomspeisestrom K6P 12 - 48 V DC, 2 mA Betriebszeit mit einer Batterie max. 150 Stunden Abmessungen in mm netto: 94 x Ø 22 (K6P: 55 x Ø 22) *
brutto: 155 x Ø 22 (K6P: 112 x Ø 22) Gewicht (ohne Batterie) ca. 45g (K6P: 30g) Stecker XLR-3
Lieferumfang K6 / K6P • Speiseadapter
• Stativklemme MZQ 200 Lieferumfang K6-C / K6-CL / K6P-C • Speiseadapter
* Dieses Maß müssen sie zur Länge des entsprechenden Mikrofon-Modules dazuzählen, um zur Gesamtlänge des enstandenen Mikrofones zu gelangen.
4

K6 / K6 P Powering modules

+
The K6 and K6P powering modules power the various microphone heads of the K6 modular microphone system and provide them with a balanced microphone level output. The powering module is also the microphone body for the different heads. Please refer to the enclosed system overview for possible combinations.
Versions K6 Powering module for battery or phantom powering. Switchable bass
roll-off filter, on/off switch with battery condition indicator.
K6 P Powering module for phantom powering only. Switchable bass roll-off
filter, on/off switch.
...-C Versions supplied without accessories. K6-CL Identical to K6, but with lower sensitivity.
Battery operation (K6 only)
Insert a 1.5V AA (LR6) size battery (taking care to observe the correct
polarity) into the powering module and screw on a microphone head.
Switch the microphone on, checking the battery condition (the LED will blink
as the powering module is switched on). If the LED is bright, the battery capacity is OK, if it is dim, the battery is low and should be replaced.
When the powering module is connected to a phantom power
source, it automatically switches from battery to phantom power operation, thus conserving the battery.
Phantom power operation (K6 and K6P)
Both the K6 and K6P powering modules can be powered by 12-48V DC phantom power via the connection cable (phantom powering).
5
Effect of the bass roll-off filter (B)

Roll-off filter

The bass roll-off filter (B) (see drawing on previous page) effectively rejects rumble, handling, pop and wind noises, as well as reducing the proximity effect when used in close miking situations.
Technical data K6 (K6P)
Electrical impedance approx. 200 (bal.), approx. 100 (unbal.) Min. terminating impedance 1 k Sensitivity at 1 kHz 0 dB (K6-CL –18 dB) Max. output voltage (no load) 2V (corresponds to 6dBV) Output transformerless, balanced Phantom power 12 – 48V DC, 2mA Battery operating time (K6 only) max. 150 hrs Dimensions in mm 155 x Ø 22 (K6P 112 x Ø 22) Resultant length in mm* 94 (55) Weight K6: 45g (without battery)
K6P: 30g
Connector: XLR-3 Supply schedule K6/K6P • Powering module
• MZQ 200 stand adaptor
Supply schedule K6-C / K6-CL / K6P-C • Powering module only
* Resultant length: this is the figure you need to add to the capsule length to give the overall length of the complete microphone.
6
Loading...
+ 9 hidden pages