Sennheiser HME 100 SE User Manual

0 (0)
Sennheiser HME 100 SE User Manual

HME 100 SE

Headsets | Pilot´s Headset

General Description

Featuring an elegant high-tech finish, closed ear protector headphones and excellent passive noise attenuation, the HME 100 Special Edition pilot‘s headset is ideal for use in propeller and turbo-prop aircraft.

Features

Special edition headset

Constant attenuation of up to 40 dB

Advanced transducer design ensures excellent speech intelligibility

Headphone volume control

Noise-compensated boom microphone for superior speech transmission

Delivery includes: 1 HME 100 Special Edition

1 carrying case for headset and accessories

1 MZQ 2002-1 cable clip

1 MZW 45 windshield

Recommended Accessories

 

Gel ear pads

Cat. No. 083140

Replacement parts

 

Ear pads (1 pair)

Cat. No. 077960

MZW 45 windshield

Cat. No. 075823

Cat. No. 500076

Special Edition

Technical Data

 

 

Headphones

 

 

Transducer principle............................................................

 

dynamic

Ear coupling........................................................

 

circumaural, closed

Frequency response ................................................

 

45 – 15,000 Hz

Nominal impedance active/passive

 

HME 100/105/120........................................................

 

150 Ω , mono

HME 100..................................................

 

300 Ω per system, stereo

Attenuation (passive) .................................................

 

> 10 – 40 dB

NRR (Noise Reduction Rating)

24 dB

Contact pressure...........................................................

 

approx. 10 N

Weight without cable ...............................................................

 

350 g

Microphone incl. Preamplifier

 

Type.......................................................................................

 

MKE 45-1

Transducer principle...............

back-electret condenser capsule,

 

 

noise - compensated

Frequency response ................................................

 

300 – 5,000 Hz

Max. SPL ...................................................................................

 

120 dB

Output voltage...............................

 

400 mV ± 3 dB at 114 dB/SPL

 

 

(as per RTCA/DO 214)

Terminating impedance...........................................................

150 Ω

Operating voltage.......................

 

8 – 16 V DC, approx. 8 – 25 mA

 

 

(as per RTCA/DO 214)

General Data

 

 

Connection cable...........

single-sided round cable, length 1.5 m

Connectors

 

 

HME 100

 

 

– Headphones.........................................................

 

1/4” stereo jack

– Microphone...................................................

 

PJ - 068 (5.25 mm Ø)

Specials................................................

 

headphone volume control,

 

 

mono/stereo switch

Operating temperature...................................... ...

+ 55 °C

Storage temperature ...........................................

...

+ 55 °C

Loading...