Product Manual
Momentus 7200.2 SATA
ST9200420ASG |
ST9120823AS |
ST9200420AS |
ST9100821AS |
ST9160823ASG |
ST980813ASG |
ST9160823AS |
ST980813AS |
100451238 Rev. E December 2007
©2004-2007, Seagate Technology LLC All rights reserved. Publication number: 100451238, Rev. E
December 2007
Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Momentus, SeagateSeaBOARD, SeaFONE, SeaTDD, and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/ or other countries. All other trademarks or registered trademarks are the property of their respective owners.
One gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. Quantitative usage examples for various applications are for illustrative purposes. Actual quantities will vary based on various factors, including file size, file format, features and application software. Seagate reserves the right to change, without notice, product offerings or specifications.
Contents
1.0 |
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
1 |
|
|
1.1 |
About the Serial ATA (SATA) interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
2 |
2.0 |
Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
3 |
2.1 Specification summary table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.2 Formatted capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2.1 LBA mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.3 Default logical geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.4 Physical organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.5 Recording and interface technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.6 Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.7 Seek time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.8 Start/stop times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.9 Power specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.9.1 Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.9.2 Conducted noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.9.3 Voltage tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.9.4 Power-management modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.10 Environmental specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.10.1 Ambient temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.10.2 Temperature gradient. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.10.3 Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.10.4 Altitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.10.5 Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2.10.6 Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.11 Acoustics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2.12 Electromagnetic immunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2.13 Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2.13.1 Free Fall Protection feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2.14 Agency certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2.14.1 Safety certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2.14.2 Electromagnetic compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2.14.3 FCC verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.15 Environmental protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2.15.1 European Union Restriction of Hazardous Substances (RoHS) Directive . . . . . 16 2.15.2 China Restriction of Hazardous Substances (RoHS) Directive . . . . . . . . . . . . . 16
2.16 Corrosive environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.0 |
Configuring and mounting the drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
19 |
|
|
3.1 |
Handling and static-discharge precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
19 |
|
3.2 |
Configuring the drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
20 |
|
3.3 |
Serial ATA cables and connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
20 |
|
3.4 |
Drive mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
21 |
4.0 Serial ATA (SATA) interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4.1 Hot-Plug compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4.2 Serial ATA device plug connector pin definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4.3 Supported ATA commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 4.3.1 Identify Device command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 4.3.2 Set Features command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 4.3.3 S.M.A.R.T. commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
5.0 Seagate Technology support services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Momentus 7200.2 SATA Product Manual, Rev. E |
i |
ii |
Momentus 7200.2 SATA Product Manual, Rev. E |
List of Figures
Figure 1. Typical 5V startup and operating current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Figure 2. Serial ATA connectors and jumper options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Figure 3. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Figure 4. Drive dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Momentus 7200.2 SATA Product Manual, Rev. E |
iii |
This manual describes the functional, mechanical and interface specifications for the following Seagate Momentus® 7200.2 SATA model drives:
•ST9200420ASG
•ST9200420AS
•ST9160823ASG
•ST9160823AS
•ST9120823AS
•ST9100821AS
•ST980813ASG
•ST980813AS
These drives provide the following key features:
•7,200 RPM spindle speed
•8 Mbyte buffer (80—160 GB models)
•16 Mbyte buffer (200 GB models)
•Free Fall Protection (on ST9200420ASG, ST9160823ASG and ST980813ASG models only)
•High instantaneous (burst) data-transfer rates (up to 3.0 Gb/s)
•Tunneling Magnetoresistive (TMR) recording heads
•State-of-the-art cache and on-the-fly error-correction algorithms
•Full-track multiple-sector transfer capability without local processor intervention
•Quiet operation
•800 Gs nonoperating shock
•SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns
•The 3D Defense System™, which includes Drive Defense, Data Defense and Diagnostic Defense, offers the industry’s most comprehensive protection for disc drives
•Support for S.M.A.R.T. drive monitoring and reporting
•Support for Read Multiple and Write Multiple commands
Momentus 7200.2 SATA Product Manual, Rev. E |
1 |
The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include:
•Easy installation and configuration with true plug-and-play connectivity. It is not normally necessary to set any jumpers or other configuration options. A jumper position is available to configure the drive for 1.5Gb/s operation for systems that can not operate at a 3Gb/s transfer rate.
•Thinner and more flexible cabling for improved enclosure airflow and ease of installation.
•Scalability to higher performance levels.
In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial ATA was designed to allow you to install a Serial ATA host adapter and Serial ATA disc drive in your current system and expect all of your existing applications to work as normal.
The Serial ATA interface connects each disc drive in a point-to-point configuration with the Serial ATA host adapter. There is no master/slave relationship with Serial ATA devices like there is with parallel ATA. If two drives are attached on one Serial ATA host adapter, the host operating system views the two devices as if they were both “masters” on two separate ports. This essentially means both drives behave as if they are Device 0 (master) devices.
Note. The host adapter may, optionally, emulate a master/slave environment to host software where two devices on separate Serial ATA ports are represented to host software as a Device 0 (master) and Device 1 (slave) accessed at the same set of host bus addresses. A host adapter that emulates a master/slave environment manages two sets of shadow registers. This is not a typical Serial ATA environment.
The Serial ATA host adapter and drive share the function of emulating parallel ATA device behavior to provide backward compatibility with existing host systems and software. The Command and Control Block registers, PIO and DMA data transfers, resets, and interrupts are all emulated.
The Serial ATA host adapter contains a set of registers that shadow the contents of the traditional device registers, referred to as the Shadow Register Block. All Serial ATA devices behave like Device 0 devices. For additional information about how Serial ATA emulates parallel ATA, refer to the “Serial ATA: High Speed Serialized AT Attachment” specification. The specification can be downloaded from http://www.serialata.com.
2 |
Momentus 7200.2 SATA Product Manual, Rev. E |
2.0Drive specifications
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the ST9200420ASG, ST9200420AS, ST9160823AS, ST9160823ASG, ST9120823AS, ST9100821AS, ST980813AS and ST980813ASG models.
The specifications listed in this table are for quick reference. For details on specification measurement or definition, see the appropriate section of this manual.
Table 1: |
Drive specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ST9200420ASG |
ST9160823AS |
|
|
ST980813AS |
Drive specification |
ST9200420AS |
ST9160823ASG |
ST9120823AS |
ST9100821AS |
ST980813ASG |
|
|
|
|
|
|
|
|
Formatted Gbytes (512 bytes/sector)* |
200 |
160 |
120 |
100 |
80 |
|
|
|
|
|
|
|
|
Guaranteed sectors |
390,721,968 |
312,581,808 |
234,441,648 |
195,371,568 |
156,301,488 |
|
|
|
|
|
|
|
|
Bytes per sector |
512 |
|
|
|
|
|
|
|
|
|
|
|
|
Default sectors per track |
63 |
|
|
|
|
|
|
|
|
|
|
|
|
Default read/write heads |
16 |
|
|
|
|
|
|
|
|
|
|
|
|
Default cylinders |
16,383 |
|
|
|
|
|
|
|
|
|
|
|
|
Physical read/write heads |
4 |
|
3 |
3 |
2 |
|
|
|
|
|
|
|
|
Discs |
|
2 |
|
2 |
2 |
1 |
|
|
|
|
|
|
|
Recording density in BPI (bits/inch max) |
1,014,000 |
853,000 |
|
|
|
|
|
|
|
|
|
|
|
Track density TPI (tracks/inch max) |
162,600 |
155,000 |
|
|
|
|
|
|
|
|
|
|
|
Areal density (Gbits/inch2 max) |
169.4 |
131 |
|
|
|
|
Spindle speed (RPM) |
7,200 |
|
|
|
|
|
|
|
|
|
|
|
|
Internal transfer rate (Mbits/sec max) |
850 |
711 |
|
|
|
|
|
|
|
|
|
|
|
Sustained transfer rate OD (Mbytes/sec) |
69.5 |
59 |
|
|
|
|
|
|
|
|
|
|
|
I/O data transfer rate (Gb/s max) |
3.0 (can also be configured for 1.5Gb/s operation) |
|
|
|||
|
|
|
|
|
|
|
ATA data-transfer modes supported |
SATA-1 |
|
|
|
|
|
|
|
PIO modes 0–4 |
|
|
|
|
|
|
Multiword DMA modes 0–2 |
|
|
|
|
|
|
Ultra DMA modes 0–5 |
|
|
|
|
|
|
|
|
|
|
|
Cache buffer (Mbytes) |
16 |
8 |
|
|
|
|
|
|
|
|
|
|
|
Height (max) |
|
9.5 +/- 0.2 mm (0.374 +/- .0078 inches) |
|
|
||
|
|
|
|
|
||
Width (max) |
|
69.85 mm +/- 0.25 mm (2.75 +/- 0.00984 inches) |
|
|
||
|
|
|
|
|
||
Length (max) |
|
100.5 +/- 0.25 mm (3.957 +/- +/- 0.00984 inches) |
|
|
||
|
|
|
|
|
|
|
Weight (max) |
|
115 grams (0.254 lb) |
|
|
|
|
|
|
|
|
|
|
|
Average latency (msec) |
4.17 msec |
|
|
|
|
|
|
|
|
|
|
|
|
Power-on to ready (typical) |
4 seconds |
|
|
|
|
|
|
|
|
|
|
|
|
Momentus 7200.2 SATA Product Manual, Rev. E |
3 |
Table 1: |
Drive specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ST9200420ASG |
ST9160823AS |
|
|
ST980813AS |
Drive specification |
ST9200420AS |
ST9160823ASG |
ST9120823AS |
ST9100821AS |
ST980813ASG |
|
|
|
|
|
|
|
|
Standby to ready (typical) |
4 seconds |
|
|
|
|
|
|
|
|
|
|
|
|
Startup current (typical) +5V (peak) |
1.1 amps |
|
|
|
|
|
|
|
|
||||
Track-to-track seek time (msec typical) |
1.0 (read), 1.5 (write) |
|
||||
|
|
|
|
|
|
|
Average seek, read (msec typical) |
11.0 |
|
|
|
|
|
|
|
|
|
|
|
|
Average seek, write (msec typical) |
13.0 |
|
|
|
|
|
|
|
|
|
|
|
|
Seek power (typical) |
2.3 watts |
|
|
|
|
|
|
|
|
|
|
|
|
Operating power (typical) |
2.1 watts |
|
|
|
|
|
|
|
|
|
|
|
|
Idle mode, low power (typical) |
0.8 watts |
|
|
|
|
|
|
|
|
|
|
|
|
Standby mode (average) |
0.25 watts*** |
|
|
|
|
|
|
|
|
|
|
|
|
Sleep mode (average) |
0.2 watts*** |
|
|
|
|
|
|
|
|
||||
Voltage tolerance (including noise) |
+5V ± 5% / -8% startup |
|
||||
|
|
|
||||
Ambient temperature |
0° to 60°C (operating) |
|
||||
|
|
–40° to 70°C (nonoperating) |
|
|||
|
|
|
|
|
|
|
Temperature gradient |
20°C (operating) |
|
|
|
|
|
(°C per hour max, non-condensing) |
30°C (nonoperating) |
|
||||
|
|
|
||||
Relative humidity |
5% to 90% (operating) |
|
||||
|
|
5% to 95% (nonoperating) |
|
|||
|
|
|
||||
Relative humidity gradient (non-condensing) |
30% per hour max (operating and nonoperating) |
|
||||
|
|
|
|
|
|
|
Wet bulb temperature (max) |
30°C (operating) |
|
|
|
|
|
|
|
40°C (nonoperating) |
|
|||
|
|
|
||||
Altitude, operating |
–304.8 m to 3,048 m |
|
||||
|
|
(–1000 ft to 10,000+ ft) |
|
|||
|
|
|
||||
Altitude, nonoperating |
–304.8 m to 12,192 m |
|
||||
(meters below mean sea level, max) |
(–1000 ft to 40,000+ ft) |
|
||||
Shock, operating (Gs max at 2 msec) |
300 |
|
|
|
|
|
|
|
|
|
|
|
|
Shock, nonoperating (Gs max at 2 msec) |
800 |
|
|
|
|
|
|
|
|
|
|
|
|
Shock, nonoperating (Gs max at 1 msec) |
900 |
|
|
|
|
|
|
|
|
|
|
|
|
Shock, nonoperating (Gs max at 0.5 msec) |
400 |
|
|
|
|
|
|
|
|
||||
Vibration, operating |
1.0 G (0 to peak, 5–500 Hz) |
|
||||
|
|
|
||||
Vibration, nonoperating |
5.0 G (0 to peak, 5–500 Hz) |
|
||||
|
|
|
|
|
|
|
Drive acoustics, sound power (bels) |
|
|
|
|
|
|
Idle** |
|
2.5 (typical) |
|
|
|
|
|
|
2.8 (max) |
|
|
|
|
Seek |
|
2.9 (typical) |
|
|
|
|
|
|
3.1 (max) |
|
|
|
|
|
|
|
||||
Nonrecoverable read errors |
1 per 1014 bits read |
|
||||
Annualized Failure Rate (AFR) |
0.68% |
|
|
|
|
|
|
|
|
|
|||
Warranty |
|
5 Years on distribution units. |
|
|||
|
|
To determine the warranty for a specific drive, use a web browser to access the following |
||||
|
|
web page: http://www.seagate.com/support/service/ |
|
|||
|
|
From this page, click on the “Verify Your Warranty” link. You will be asked to provide the |
||||
|
|
drive serial number, model number (or part number) and country of purchase. The system |
||||
|
|
will display the warranty information for your drive. |
|
|||
|
|
|
|
|
|
|
4 |
Momentus 7200.2 SATA Product Manual, Rev. E |
Table 1: |
Drive specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ST9200420ASG |
ST9160823AS |
|
|
ST980813AS |
Drive specification |
ST9200420AS |
ST9160823ASG |
ST9120823AS |
ST9100821AS |
ST980813ASG |
|
|
|
|
|
|
|
|
Load/Unload (L/UL) cycles |
|
|
|
|
|
|
25°C, 50% relative humidity |
600,000 software-controlled power on/off cycles |
|
||||
|
|
20,000 hard power on/off cycles |
|
|||
32°C, 80% relative humidity |
600,000 software-controlled power on/off cycles |
|
||||
5°C, 80% relative humidity |
20,000 hard power on/off cycles |
|
||||
5°C, 20% relative humidity |
|
|
|
|
|
|
60°C, 20% relative humidity |
|
|
|
|
|
|
|
|
|
|
|
|
|
Supports Hotplug operation per SATA II |
Yes |
|
|
|
|
|
specification |
|
|
|
|
|
|
|
|
|
|
|
|
|
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.
***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby modes will not contribute to battery power consumption.
Model |
Formatted capacity* |
Guaranteed sectors |
Bytes per sector |
|
|
|
|
ST9200420AS and ST9200420ASG |
200 Gbytes |
390,721,968 |
512 |
|
|
|
|
ST9160823AS and ST9160823ASG |
160 Gbytes |
312,581,808 |
512 |
|
|
|
|
ST9120823AS |
120 Gbytes |
234,441,648 |
512 |
|
|
|
|
ST9100821AS |
100 Gbytes |
195,371,568 |
512 |
|
|
|
|
ST980813AS and ST980813ASG |
80 Gbytes |
156,301,488 |
512 |
|
|
|
|
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
2.2.1LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guaranteed sectors as defined above.
See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48bit addressing support of drives with capacities over 137 Gbytes.
Cylinders |
Read/write heads |
Sectors per track |
|
|
|
16,383 |
16 |
63 |
|
|
|
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guaranteed sectors as defined above.
Momentus 7200.2 SATA Product Manual, Rev. E |
5 |
Drive model |
Read/write heads |
Number of discs |
|
|
|
|
|
ST9200420AS and ST9200420ASG |
4 |
|
|
|
|
||
ST9160823AS and ST9160823ASG |
2 |
||
|
|||
|
|
||
ST9120823AS |
3 |
||
|
|||
|
|
||
ST9100821AS |
|
||
|
|
||
|
|
|
|
ST980813AS and ST980813ASG |
2 |
1 |
|
|
|
|
|
200 GB models |
160 - 80 GB models |
|
|
|
Interface |
Serial ATA (SATA) |
|
|
|
|
Recording density BPI (bits/inch max) |
1,014,000 |
853,000 |
|
|
|
Track density TPI (tracks/inch max) |
162,600 |
155,000 |
|
|
|
Areal density (Gbits/inch2 max) |
169.4 |
131 |
Spindle speed (RPM) (± 0.2%) |
7,200 |
|
|
|
|
Maximum Internal transfer rate (Mbits/sec) |
850 |
711 |
|
|
|
Sustained transfer rate OD (Mbytes/sec max) |
69.5 |
59 |
|
|
|
I/O data-transfer rate (Mbytes/sec max) |
300 (can also be configured for 150MB/s operation) |
|
|
|
|
Interleave |
1:1 |
|
|
|
|
Cache buffer |
16 Mbytes (16,384 kbytes) |
8 Mbytes (8,192 kbytes) |
|
|
|
Drive specification |
|
|
|
|
|
|
|
Height |
(mm) |
9.5 +/-0.2 |
|
|
(inches) |
0.374 |
+/-0.0078 |
|
|
|
|
Width |
(mm) |
69.85 |
+/-0.25 |
|
(inches) |
2.75 |
+/-0.00984 |
|
|
|
|
Length |
(mm) |
100.5+/- 0.25 |
|
|
(inches) |
3.957 |
+/- 0.00984 |
|
|
|
|
Maximum weight |
(grams) |
115 grams |
|
|
(pounds) |
(0.254 lb) |
|
|
|
|
|
6 |
Momentus 7200.2 SATA Product Manual, Rev. E |
Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows:
•Track-to-track seek time is an average of all possible single-track seeks in both directions.
•Average seek time is a true statistical random average of at least 5,000 measurements of seeks between random tracks, less overhead.
Table 2: |
Typical seek times |
|
|
|
|
|
|
*Typical seek times (msec) |
Read |
Write |
|
|
|
|
|
Track-to-track |
1.0 |
1.5 |
|
|
|
|
|
Average |
|
11.0 |
13.0 |
|
|
|
|
Full-stroke |
|
22.0 |
24.0 |
|
|
|
|
Average latency |
4.17 |
|
|
|
|
|
|
*Measured in performance mode
Note. These drives are designed to consistently meet the seek times represented in this manual. Physical seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted values. However, due to the manner in which these drives are formatted, benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications.
Time to ready |
Typical |
Max |
|
|
|
Power-on to Ready (sec) |
4 |
8 |
|
|
|
Standby to Ready (sec) |
4 |
8 |
|
|
|
Spin down |
5 |
8 |
|
|
|
Momentus 7200.2 SATA Product Manual, Rev. E |
7 |
The drive receives DC power (+5V) through a native SATA power connector.
Power requirements for the drives are listed in Table 3, on page 8. Typical power measurements are based on an average of drives tested, under nominal conditions, at 25°C ambient temperature.
•Spinup power
Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed.
•Seek mode
During seek mode, the read/write actuator arm moves toward a specific position on the disc surface and does not execute a read or write operation. Servo electronics are active. Seek mode power is measured based on three random seek operations every 100 msecs. This mode is not typical.
•Read/write power and current
Read/write power is measured with the heads on track, based on three 63 sector read or write operations every 100 msecs.
•Idle mode power
Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in a random track location.
•Standby mode
During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/ write electronics are in power-down model
Table 3: |
DC power requirements |
|
|
|
|
|
|
Power dissipation (watts) |
+5V input average |
|
|
Example: ST9160823AS |
(watts, 25° C) |
+5V typ amps |
|
|
|
|
|
Spinup |
|
— |
1.1 |
|
|
|
|
Seek |
|
2.3 |
|
|
|
|
|
Read |
|
2.1 |
|
|
|
|
|
Write |
|
2.1 |
|
|
|
|
|
Idle, performance mode* |
1.9 |
|
|
|
|
|
|
Idle, active* |
|
1.1 |
|
|
|
|
|
Idle, low power mode* |
0.8 |
|
|
|
|
|
|
Standby |
|
0.25 |
|
|
|
|
|
Sleep |
|
0.2 |
|
|
|
|
|
*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.
8 |
Momentus 7200.2 SATA Product Manual, Rev. E |