Seagate ST19171N, ST19171WC, ST19171W, ST19171DC, ST19171WD User Manual

0 (0)

• • • • • • • • • • • • • • • • • • • • • • • • • •

BARRACUDA 9

• • • • • • • • • • • • • • • • • • • • • • • • • •

Disc Drive

• • • • • • • • • • • • • • • • • • • • • • • • •

ST19171N/W/WD/WC/DC

• • • • • • • • • • • • • • •

Installation Guide

 

 

 

 

 

 

 

 

 

 

 

Contents

 

Preface ........................................................................................

1

Electrostatic discharge protection................................................

1

Important safety information and precautions..............................

2

Wichtige Sicherheitshinweise ......................................................

4

European Union Compliance.......................................................

8

Technical support services ..........................................................

9

General description....................................................................

11

Initial setup information ..............................................................

16

Kühlung des Systems ................................................................

21

Installation des Laufwerkes

 

und Anschluß der Kabel..........................................................

23

N drives section .........................................................................

28

W/WD drives section .................................................................

32

WC/DC drives section................................................................

37

©1995 Seagate Technology, Inc. All rights reserved Publication Number: 83329020, Rev. A

February 1996

Seagate®, Seagate Technology®, and the Seagate logoare registered trademarks of Seagate Technology, Inc. Barracuda™, SeaFAX™, SeaFONE™, SeaTDD™, and SeaBOARD™ are trademarks of Seagate Technology, Inc.

Apple and Macintosh are registered trademarks of Apple Computer, Inc. Other product names are registered trademarks or trademarks of their owners.

No part of this publication may be reproduced in any form without written permission from Seagate Technology, Inc.

Barracuda 9 Installation Guide, Rev. A

1

Preface

This manual contains information for users of the Seagate® ST19171 Barracuda™ 9 SCSI disc drives. It provides support services, performance specifications, and initial setup information. Additional information is available in the Barracuda 9 Product Manual (part number 83329030). Contact your Seagate sales representative if you need to order this publication.

Electrostatic discharge protection

Caution. Removal of circuit boards by personnel not performing depot repair will damage components and may void the warranty.

All drive electronic assemblies are sensitive to static electricity, due to the electrostatically sensitive devices used within the drive circuitry. Although some devices such as metal-oxide semiconductors are extremely sensitive, all semiconductors, as well as some resistors and capacitors, may be damaged or degraded by exposure to static electricity.

Electrostatic damage to electronic devices may be caused by the direct discharge of a charged conductor or by exposure to the static fields surrounding charged objects. To avoid damaging drive electronic assemblies, observe the following precautions when installing or servicing the drive:

Ground yourself to the drive whenever the drive electronics are or will be exposed. Connect yourself to ground with a wrist strap (Seagate part number 12263496). Connection may be made to any grounded metal assembly. As a general rule, remember that you and the drive electronics must all be grounded to avoid potentially damaging static discharges.

2

Barracuda 9 Installation Guide, Rev. A

Turn off the power before removing or installing the DC power cable.

Do not remove any circuit boards from the drive.

Never use an ohmmeter on any circuit boards.

When installing the drive on a carrier or tray, discharge the carrier or tray prior to inserting it into the system.

Important safety information and precautions

Caution. Use forced-air ventilation when bench-testing the drive to ensure proper cooling of drive components.

Use proper safety and repair techniques for safe, reliable operation of this unit. Service should be done only by qualified persons. We recommend the procedures in this manual as effective ways of servicing the unit. Some procedures require the use of special tools. For proper maintenance and safety, you must use these tools as recommended.

The procedures in this manual and labels on the unit contain warnings and cautions that must be carefully read and followed to minimize or eliminate the risk of personal injury. The warnings point out conditions or practices that may endanger you or others. The cautions point out conditions or practices that may damage the unit, possibly making it unsafe for use.

These warnings and cautions are not exhaustive. We cannot possibly know, evaluate, and advise you of all the ways in which maintenance might be performed or the possible risk of each technique. Consequently, we have not completed any such broad evaluation. If you use a non-approved procedure or tool, first ensure that the method you choose will not risk either your safety or unit performance.

Barracuda 9 Installation Guide, Rev. A

3

Always observe the following warnings and precautions:

Perform all maintenance by following the procedures in this manual.

Follow all cautions and warnings in the procedures.

Use sound safety practices when operating or repairing the unit.

Use caution when troubleshooting a unit that has voltages present. Turn off power to the unit before servicing it.

Wear safety shoes when removing or replacing heavy parts.

Ensure that the internal temperature of the rack or cabinet does not exceed the limits defined for the drive when the drive is mounted in an equipment rack or cabinet. When units are stacked vertically, pay special attention to the top where temperatures are usually highest.

Follow the precautions listed above in “Electrostatic discharge protection.”

Do not remove any circuit boards from the drive chassis. Return the entire drive for depot repair if any circuit board is defective. Removal of circuit boards by personnel not performing depot repair will damage components and may void the warranty.

Do not remove the head and disc assembly (HDA) from the drive chassis. Return the entire drive for depot repair if the HDA is defective.

Do not attempt to disassemble the HDA. It is not field repairable. If the sealed HDA is opened by personnel not performing depot repair, this will damage components and void the warranty.

4

Barracuda 9 Installation Guide, Rev. A

As a component, this drive is designed to be installed and operated in accordance with UL1950, EN60950, CSA C22.2 950M89, and VDE0805.

Seagate takes all reasonable steps to ensure that its products are certifiable to currently accepted standards. Typical applications of these disc drives include customer packaging and subsystem design. Safety agencies conditionally certify component assemblies, such as the Barracuda disc drive, based on their final acceptability in the end-use product. The subsystem designers are responsible for meeting these conditions of acceptability in obtaining safety-regulatory agency compliance in their end-use products and for certifying where required by law. A necessary part of meeting safety requirements is the provision for overcurrent protection on drive SELV supply voltages.

This unit is a component part and as such is not meant to comply with FCC or similar national requirements as a stand-alone unit. Engineering radiated emissions test results are available through the Seagate Safety Department to assist the subsystem designer.

Wichtige Sicherheitshinweise

Vorsicht. Beim Testen des Laufwerks auf dem Prüftisch ist Fremdbelüftung vorzusehen, um eine ausreichende Kühlung der Laufwerkkomponenten sicherzustellen.

Verwenden Sie geeignete Sicherheitsund Reparaturverfahren, um den sicheren, zuverlässigen Betrieb dieser Einheit zu gewährleisten. Reparaturen dürfen nur von qualifiziertem Fachpersonal vorgenommen werden. Wir empfehlen die Verfahren in diesem Handbuch als effektive Methoden zur Wartung und Rep-

Barracuda 9 Installation Guide, Rev. A

5

aratur der Einheit. Einige Verfahren erfordern Spezialwerkzeuge; diese müssen zur sachgemäßen Ausführung der Wartungsarbeiten und aus Sicherheitsgründen den Empfehlungen entsprechend verwendet werden.

Die Verfahren in diesem Handbuch und die Aufkleber auf dem Gerät enthalten Warnund Vorsichtshinweise. Diese Hinweise sind sorgfältigdurchzulesen und zu beachten, um das Risiko von Verletzungen auf ein Mindestmaß zu beschränken oder ganz zu vermeiden. Die Warnhinweise machen auf Situationen oder Praktiken aufmerksam, die Sie oder andere gefährden könnten. Die Vorsichtshinweise machen auf Situationen oder Praktiken aufmerksam, die Einheit beschädigen können, so daß deren Gebrauch mit Risiko behaftet ist.

Die Warnund Vorsichtshinweise sind nicht allumfassend! Es ist uns einfach nicht möglich, alle Wartungsmethoden oder die eventuellen Risiken jeder Methode zu kennen, zu beurteilen und Sie entsprechend zu beraten. Aus diesem Grund haben wir auf eine derartige umfassende Beurteilung verzichtet. Falls Sie ein hier nicht beschriebenes Verfahren oder Werkzeug verwenden, stellen Sie zuerst sicher, daß das gewählte Verfahren weder Ihre persönliche Sicherheit noch die Leistung der Einheit gefährdet.

Beachten Sie in jedem Fall die folgenden Warn-und Vorsichtshinweise:

Führen Sie alle Wartungsarbeiten entsprechend den Anweisungen in diesem Handbuch aus.

Beachten Sie alle Warnund Vorsichtshinweise in diesem Handbuch.

Treffen Sie beim Betrieb oder bei der Reparatur der Einheit angemessene Sicherheitsvorkehrungen.

6

Barracuda 9 Installation Guide, Rev. A

Wenn eine Einheit unter Spannung steht, gehen Sie bei der Fehlerdiagnose besonders vorsichtig vor. Schalten Sie die Einheit aus, bevor Sie mit den Reparaturarbeiten beginnen.

Tragen Sie Sicherheitsschuhe, wenn Sie schwere Teile ausbzw. einbauen.

Wenn das Laufwerk in einem Einbaugestell oder Gehäuse montiert ist, sorgen Sie dafür, daß die Temperatur im Inneren des Gestells oder Gehäuses die für das Laufwerk vorgegebenen Grenzwerte nicht übersteigt. Wenn Einheiten vertikal übereinander betestigt werden, achten Sie be sonders auf den oberen Stapelbereich, da dort die Temperatur gewöhnlich am höchsten ist.

Befolgen Sie die oben unter “Electrostatic Discharge Protection” angegebenen Sicherheitsmaßnahmen.

Nehmen Sie keine Platinen aus dem Laufwerkgehäuse. Wenn eine Platine defekt ist, muß das gesamte Laufwerk zur Reparatur eingeschickt werden. Die Herausnahme von Platinen durch andere Personen als die für die werkseitige Reparatur zuständigen kann zu einer Beschädigung der Komponenten und Erlöschen des Garantieanspruchs führen.

Die vormontierte Kopfund Festplatteneinheit (HDA) nicht aus dem Laufwerkgehäuse nehmen! Falls die HDAbeschädigt ist, schicken Sie das gesamte Laufwerk zur Reparatur ein.

Die HDA ist nicht vor Ort reparierbar und darf nicht auseinandergenommen werden! Öffnen der versiegelten HDA durch andere Personen als die für die werkseitige Reparatur zuständigen hat eine Beschädigung der Komponenten und Erlöschen des Garantieanspruchs zur Folge.

Barracuda 9 Installation Guide, Rev. A

7

Als Teilkomponente ist dieses Laufwerk für die Installation und den Betrieb in Übereinstimmung mit UL 1950, EN60950, CSA C22.2 950-M89 und VDE0805 vorgesehen.

Seagate ist ständig bemüht, die Zulassungsfähigkeit von Seagate-Produkten im Rahmen der gegenwärtig geltenden Standards zu gewährleisten. Zu den typischen Anwendungen dieser Festplattenwerke zählen Systemeinbau durch den Kunden und die Konstruktion von Untersystemen. Sicherheitsbehörden gewähren eine bedingte Zulassung für Komponenten wie das Barracuda-Festplattenlaufwerk vorbehaltlich der endgül tigen Zulasssung im Endprodukt. Designer von Untersystemen sind dafür verantwortlich, die Voraussetzungen für die Einhaltung sicherheitsoder aufsichtsbehördlicher Vorschriften in ihren Endprodukten und - falls gesetzlich vorgeschrieben - für die Zulassung zu schaffen. Eine Grundvoraussetzung zur Einhaltung der Sicherheitsanforderungen ist die Bereitstellung eines Überlastschutzes für die SELV-Versorgungsspannungen des Laufwerks.

Dieses Gerät ist eine Baugruppe und unterliegt als solche nicht den Anforderungen der FCC oder ähnlicher nationaler Behörden für eigenständige Geräte. Technische Testergebnisse zu elektromagnetische Strahlung sind für Designer von Untersystemen auf Anfrage von der Seagate-Sicherheitsabteilung erhältlich.

8

Barracuda 9 Installation Guide, Rev. A

European Union Compliance

If this model has the CE Marking, it complies with the European Union requirements of the Electromagnetic Compatibility Directive 89/336/EEC of 03 May 1989 as amended by Directive 92/ 31/EEC of 28 April 1992 and Directive 93/68/EEC of 22 July 1993.

Seagate uses an independent laboratory to confirm compliance to the above directives. The drive was tested in a representative system for typical applications. The selected system represents the most popular characteristics for test platforms. The system configurations include:

486, Pentium, and PowerPC Microprocessors

3.5-inch Floppy Disc Drive

Keyboard

Monitor/Display

Although the test system with this Seagate model complies to the directives, we cannot guarantee that all systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance and provide CE Marking for their product.

Barracuda 9 Installation Guide, Rev. A

9

Technical support services

Seagate Technology provides technical support literature and diagnostic utilities to authorized distributors. Please contact your dealer for technical support and installation troubleshooting. Product technical support is available for all Seagate products by calling the SeaFAX™, SeaFONE™, SeaTDD™, or SeaBOARD™ services. These are toll calls if you dial from outside of the number’s local dialing area. Seagate also has a forum on CompuServe and an internet web site.

SeaFAX: USA (408) 438-2620; England 44-62-847-7080

Use a touch-tone telephone to access Seagate’s automated FAX system and select technical support information by return FAX. This service is available 24 hours a day, 7 days a week.

CompuServe forum

Online support for Seagate products is available on CompuServe. This includes an extensive question and answer message base, downloadable utilities, and documentation files in AdobeTM AcrobatTM format which you can download and view from your own computer. Type “Go Seagate” to access this service.

SeaFONE: (408) 438-8222

Technical support specialists are available from 8:00 A.M. to 5:00 P.M. PST, Monday through Friday. Recorded technical information on selected Seagate products is provided while you are on hold. Recordings are accessible 24 hours a day, 7 days a week.

10

Barracuda 9 Installation Guide, Rev. A

SeaTDD: (408) 438-5382

TDD is a telecommunication device for the deaf where two people can communicate using a keyboard connected to the phone line. A TDD device is required to access this service, which is available from 8:00 A.M. to 5:00 P.M. PST, Monday through Friday.

SeaBOARD

The Seagate Technical Support Bulletin Board System (BBS) is available 24 hours a day, 7 days a week. A modem is required to access this service. The communications software must be set for eight data bits, no parity, and one stop bit (8N1). These operate at 300 to 9600 baud. With this service you can access:

Specifications and jumper configurations

Reprints of documentation

Utilities that you can download to your own computer

SeaBOARD Location

Modem number

USA, Mexico, Latin America........................

(408) 438-8771

England .......................................................

44-62-847-8011

Germany......................................................

49-89-140-9331

Singapore ....................................................

65-292-6973

Australia ......................................................

61-2-756-2359

Canada........................................................

(416) 856-5581

France .........................................................

33-1-40-67-1034

Korea...........................................................

82-2-556-7294

Internet web site: www.seagate.com

Support services, product information, and much more is provided on this web site.

Seagate ST19171N, ST19171WC, ST19171W, ST19171DC, ST19171WD User Manual

Barracuda 9 Installation Guide, Rev. A

11

General description

Barracuda 9 SCSI disc drives are high-speed, random-access digital-data storage devices.

The drive is a component for installation in an enclosure designed for the drive. This is often a rack within the system or an external enclosure designed to house one or more disc drives or other peripheral units. In either case, the disc drive must receive adequate cooling (refer to “Providing adequate cooling”) and it must be sufficiently grounded and shielded from emissions . The Barracuda 9 Product Manual (part number 83329030) contains guidelines for a properly designed enclosure.

 

DC Power

Pin 1

Connector

 

Pin 1

J1

SCSI I/O

Connector

J2

J6

Figure 1. Barracuda 9 disc drive (N model shown)

12

Barracuda 9 Installation Guide, Rev. A

Characteristics

ST19171

Interface

UltraSCSI1

Capacity

 

Unformatted

11.7 Gbytes

Formatted2

9.1 Gbytes

Recording

 

Cylinders (user)

5,273

Read/write data heads

20

Servo heads

Embedded

Seek time3

 

Average read

9.0 msec

Average write

10.5 msec

Disc rotation

 

RPM

7,200

Average latency

4.17 msec

Internal transfer rate

80 to 124

(Mbits/sec, variable with zone)

Max sync. SCSI transfer rate

N

20 Mbytes/sec

W/WD/WC/DC

40 Mbytes/sec

Multi-segmented cache

512 Kbytes

 

2,048 Kbytes (optional)

1Can also be operated according to SCSI-1 and SCSI-2 protocols.

2Standard factory units are formatted as follows:

512 data bytes per sector

9 spare sectors per cylinder

1 cylinder at the inner track reserved for spares

3Not including on-board controller overhead.

Loading...
+ 30 hidden pages