SUMMARY MANUAL |
VDC-HD3500P/HD3500 |
||
|
VDC-HD3300P/HD3300 |
||
|
VDC-HD3100P/HD3100 |
||
Side B |
VCC-HD3500/HD3300 |
|
|
|
|
||
Megapixel Camera |
|
|
|
|
English |
||
THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED |
|||
|
|||
SERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL |
|
||
CODES. |
|
|
|
|
|
|
|
|
|
Français |
|
|
|
Español |
|
|
|
Deutsch |
|
|
|
|
Please read this instruction manual carefully in order to ensure correct installation. In addition, be sure to read carefully the electronic manual (INSTRUCTION MANUAL) contained in the supplied CD-ROM to ensure correct operation of the camera.
Table of Contents |
|
|
Name and Function of Each Component ................................................................. |
2 |
|
Lens Adjustment....................................................................................................... |
|
3 |
Network Settings ...................................................................................................... |
|
5 |
Specifications ........................................................................................................... |
|
7 |
Copyright Notice ....................................................................................................... |
|
9 |
■ Accessories |
|
|
Video Cable |
Connector |
Clamping Core |
Cushioning Sheet |
|
To prevent electromagnetic |
|
|
interference |
Hexagonal Wrench |
|
|
Pattern Sheet |
|
|
CD-ROM |
|
|
|
|
VDC-HD3500P |
■ Check your operating environment.
To operate the camera via network operation, you must meet the following operating requirements.
• PC |
: IBM PC/AT compatible |
• Operating system |
: Windows XP Professional/Windows Vista |
• CPU |
: Core2Duo E6700 2.66 GHz or higher |
• Memory |
: Windows XP: 1GB or more |
|
Windows Vista: 2GB or more |
• Network interface |
: 10Base-T/100Base-TX (RJ-45 connector) |
• Display card |
: 1920×1200 pixels or higher |
• Graphics chip |
: ATI RADEON HD2600 series or higher |
|
nVIDIA GeForce 8600 series or higher |
|
nVIDIA Quadro FX550 series or higher |
• Web browser |
: Internet Explorer Ver. 6.0 SP2 or higher, |
|
or Internet Explorer Ver. 7.0 |
■You can automatically set up the IP address of the camera.
This software application is useful when two or more cameras are connected to the network.
Download “AUTO IP SETUP” software application from the supplied CD-ROM.
1
Name and Function of Each Component
■ Top Face
|
|
|
|
||
|
||
|
|
|
|
|
Dome cover
Monitor Output SocketInner cover
SD Card Slot (VDC-HD3500P/HD3500)
LED lamp (VDC-HD3500P/HD3500)
The power indicator blinks to indicate the following camera statuses.
•Recording to SD memory card stopped
•Firmware update in progress
•An SD memory card error occurred (Fast blink)
Operation Buttons
•Restarting camera: Press the RESET button.
OPTION SETTINGS (CAMERA REBOOT)
•Restoring factory default settings: Press the NEAR and SET buttons simultaneously.
OPTION SETTINGS (FACTORY DEFULT)
•Resetting login password (for default users only): Press the FAR and SET
buttons simultaneously.
•Adjusting focus/Adjusting iris
Page 3, “Lens Adjustment” section or the CAMERA SETTINGS (FOCUS ASSIST/IRIS SETTING) section on the electronic manual.
•Inverting video of wall-mounted camera: Press the REVERSE button.
•Viewing Firmware Version:
“Viewing Firmware Version” section or the OPTION SETTINGS (FIRMWARE UPDATE) section on the electronic manual.
2