Multimedia Projector
MODEL PLC-XU75 PLC-XU78
Owner's Manual
This Multimedia Projector is designed with the most advanced technology for portability, durability, |
|
and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, |
|
and matrix liquid crystal display (LCD) technology. |
|
Compact Design |
Multilanguage Menu Display |
This projector is designed compact in size and weight. It is easy to carry and work anywhere you wish to use.
Compatibility
The projector widely accepts various video and computer input signals including: Computers, 6 Color systems (PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N), Component video, S-Video and RGB scart.
Simple Computer System Setting
The projector has the Multi-scan system to conform to almost all computer output signals quickly. (p.26)
Digital Zoom (for Computer)
The digital zoom function expands (to approx. 16 times of the screen size) or compresses (to approx. a half of the screen size) the image size, allowing you to focus on crucial information during the presentation. (p.34)
Noise reduction function
The Noise reduction function helps you to reduce the contained noise on the screen to get smoother images. (p.40)
Blackboard Function
Blackboard* can be used as a projection screen.
*The board color is limited to Green. (p.30, 38)
Quick Termination
The AC power cord can be unplugged immediately after turning off the projector without waiting for the termination of the cooling fan rotation.
Operation menu is available in 16 languages: English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, and Japanese. (p.42)
Logo Function
The Logo function allows you to customize the screen logo with the Logo functions. (p.43-45) You can capture an image for the screen logo, choose a logo between provided and captured.
Switchable Interface Terminal
The projector provides a switchable interface terminal. You can use the terminal as computer input or monitor output conveniently. (p.47)
Power Management
The Power management function reduces power consumption and maintains the lamp life. (p.47)
Lamp Control
Brightness of the projection lamp can be selected. (p.48)
Security Function
The Security function helps you to ensure the security with the Key lock (p.49) and the PIN code lock (p.18, 49, 50) functions. You can lock the operation on the projector and the remote control. Also you can prevent unauthorized persons from using the projector.
Input Search Function
Input signal can be searched automatically. (p.46)
Note:
•The On-Screen Menu and figures in this manual may differ slightly from the product.
•The contents of this manual are subject to change without notice.
Features and Design . . . . . . . . . . . . .2
Table of Contents . . . . . . . . . . . . . . . .3
To the Owner . . . . . . . . . . . . . . . . . . . .4
Safety Instructions . . . . . . . . . . . . . . .5
Air Circulation |
6 |
Installing the Projector in Proper |
|
Position |
6 |
Moving the Projector |
6 |
Compliance . . . . . . . . . . . . . . . . . . . . .7
Part Names and Functions . . . . . . . .8
Front |
8 |
Back |
8 |
Bottom |
8 |
Rear Terminal |
9 |
Top Control |
10 |
Remote Control |
11 |
Remote Control Battery Installation |
12 |
Operating Range |
12 |
Installation . . . . . . . . . . . . . . . . . . . . . .13
Positioning the Projector |
13 |
Adjustable Feet |
13 |
Connecting the AC Power Cord |
14 |
Connecting to a Computer |
15 |
Connecting to Video Equipment |
16 |
Connecting to Component Video |
|
Equipment |
17 |
Basic Operation . . . . . . . . . . . . . . . . .18
Turning On the Projector |
18 |
Turning Off the Projector |
19 |
How to Operate the On-Screen Menu |
20 |
Menu Bar |
1 |
Zoom and Focus Adjustment |
22 |
Keystone Correction |
|
Sound Adjustment |
3 |
Remote Control Operation |
3 |
Computer Input . . . . . . . . . . . . . . . |
. .25 |
Input Source Selection |
5 |
Computer System Selection |
6 |
Auto PC Adjustment |
7 |
Manual PC Adjustment |
8 |
Image Level Selection |
30 |
Image Level Adjustment |
31 |
Screen Size Adjustment |
32 |
Video Input . . . . . . . . . . . . . . . . . . . |
. .35 |
Input Source Selection (Video, S-Video)35 |
|
Input Source Selection |
|
(Component, RGB Scart 21-pin) |
36 |
Video System Selection |
37 |
Image Level Selection |
38 |
Image Level Adjustment |
39 |
Screen Size Adjustment |
41 |
Setting . . . . . . . . . . . . . . . . . . . . . . . . .42 |
|
Setting |
42 |
Maintenance and Cleaning . . . . . . . .52 |
|
Warning Temp. Indicator |
52 |
Cleaning the Air Filters |
53 |
Attaching the Lens Cover |
53 |
Cleaning the Projection Lens |
54 |
Cleaning the Projector Cabinet |
54 |
Lamp Replacement |
55 |
Lamp Replacement Counter |
56 |
Appendix . . . . . . . . . . . . . . . . . . . . . . .57 |
|
Troubleshooting |
57 |
Menu Tree |
59 |
Indicators and Projector Condition |
61 |
Compatible Computer Specifications |
62 |
Technical Specifications |
63 |
Optional Parts |
64 |
Configurations of Terminals |
65 |
Dimensions |
65 |
PIN Code Number Memo |
66 |
Lamp Replacement Label |
66 |
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation.
Before operating this projector, read this manual thoroughly and operate the projector properly.
This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time.
Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.
If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the "Troubleshooting" section in the end of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the service center.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).. NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT.. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL..
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.
NOTE: This symbol and recycle system are applied to EU countries only and not applied to the countries in the other area of the world.
Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
Safety Precaution
WARNING: TO R E D U C E T H E R I S K O F F I R E O R ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE..
–This projector produces intense light from the projection lens.Do not stare directly into the lens, otherwise, eye damage could result. Be especially careful that children do not stare directly into the beam.
–Install the projector in a proper position. If not, it may result in a fire hazard.
–Provide appropriate space on the top, sides and rear of the projector cabinet for allowing air circulation and cooling the projector. Minimum clearance must be maintained. If the projector is to be built into a compartment or similarly enclosed, the minimum distances must be maintained. Do not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous.
SIDE and TOP |
REAR |
|
0.7'(20cm) |
|
|
1.5'(50cm) |
3'(1m) |
1.5'(50cm) |
–If the projector is not to be used for an extended time, unplug the projector from the power outlet.
CAUTION
Do not set the projector in greasy, wet, or smoky conditions such as IN a kitchen to prevent A Breakdown or a disaster.. If The PROJECTor comes in contact with oil or chemicals, IT may become deteriorated..
CAUTION
Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/ Data Processing Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle que définie dans la norme ANSI/NFPA 75 Standard for Protection of Electronic Computer/Data Processing Equipment.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE..
All the safety and operating instructions should be read before the product is operated.
Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.
Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturers.
An appliance and cart combination should be moved with care . Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating.
The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.
This projector should not be placed in a builtin installation such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of air-conditioning equipment.
This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.
Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions:
a.When the power cord or plug is damaged or frayed. b.If liquid has been spilled into the projector.
c.If the projector has been exposed to rain or water.
d.If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation.
e.If the projector has been dropped or the cabinet has been damaged.
f.When the projector exhibits a distinct change in performance-this indicates a need for service.
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.
Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.
Voor de klanten in Nederland
Bij dit produkt zijn batterijen geleverd.
Wanneer deze leeg zijn, moet u ze
niet weggooien maar inleveren als NL KCA.
Safety Instructions
Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.
–Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes.
–Keep the exhaust vent at least 3' (1 m) away from any objects.
–Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area will become hot while the projector is being used.
–Do not put anything on the cabinet. Objects put on the cabinet will not only get damaged but also cause fire hazard by heat.
Cooling fans are provided to cool down the projector. The fans’ running speed is changed according to the temperature inside the projector.
Install the projector properly. Improper Installation may reduce the lamp life and cause a fire hazard.
20˚ |
Do not tilt the projector more than |
|
|
|
20 degrees from side to side. |
20˚ |
|
|
Do not point the projector up to |
|
project an image. |
|
Do not point the projector down |
|
to project an image. |
|
Do not put the projector on either |
|
side to project an image. |
Air intake Vent
Exhaust Vent |
Air Intake Vent |
(Hot air exhaust) |
|
|
Air Intake Vent |
Exhaust Vent (Hot air exhaust)
When moving the projector, replace the lens cover and retract the adjustable feet to prevent damage to the lens and cabinet. When the projector is not in use for an extended period, put it into a suitable case to protect the projector.
When handling the projector, do not drop, bump, subject it to strong forces, or put other things on the cabinet.
USE CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR
–Do not drop or bump the projector, otherwise damages or malfunctions may result.
–When carrying the projector, use a suitable carrying case.
–Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to the projector. To transport the projector through a courier or transport service, consult your dealer for their information.
–Do not put the projector in a case before the projector is cooled enough.
Federal Communications Commission Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.
Model Number |
: PLC-XU75/PLC-XU78 |
Trade Name |
: Sanyo |
Responsible party |
: SANYO FISHER COMPANY |
Address |
: 21605 Plummer Street, Chatsworth, California 91311 |
Telephone No. |
: (818)998-7322 |
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician. GROUND
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus ASA . If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted. (See Over)
WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET..
The Wires in this mains lead are coloured in accordance with the following code: Green-and-yellow . . . Earth
Blue . . . . . . . . Neutral Brown . . . . . . . . Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked |
|
by the letter E or by the safety earth symbol |
or coloured green or green-and-yellow. |
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
WARNING: THIS APPARATUS MUST BE EARTHED..
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE..
q w e r t |
y |
!1 |
y |
|
u i |
o!0y |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
!2 |
!3 |
!4 |
!5 |
q Infrared Remote Receiver
w Zoom Ring
e Projection Lens
r Focus Ring
tLens Cover
(See page 53 for attaching.)
y Air Intake Vent
u Power Cord Connector i Speaker
o Terminals and Connectors !0Top Controls and Indicators !1Exhaust Vents
CAUTION
Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.
!2Lamp Cover
!3Air Intake Vents (back and bottom) !4Air Filters
!5Adjustable Feet
Kensington Security Slot
This slot is for a Kensington lock used to deter theft of the projector.
*Kensington is a registered trademark of ACCO Brands Corporation.
Part Names and Functions
q |
w |
e |
|
|
r t y |
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
i u
qSERVICE PORT
This jack is used to service the projector.
w COMPUTER IN 1/COMPONENT IN
Connect output signal from a computer, R G B s c a r t 2 1 - p i n v i d e o o u t p u t , o r component video output to this terminal. (p15, 17)
When the cable is of the longer variety, it is advisable to use this terminal and not COMPUTER IN 2/MONITOR OUT.
eCOMPUTER IN 2 / MONITOR OUT
This terminal is switchable and can be used for input from a computer or output the incoming RGB analog signal from C O M P U T E R I N 1 / C O M P O N E N T I N terminal to the other monitor.
Set the terminal up as either Computer input or Monitor output properly. (Used for Monitor out, this terminal outputs only incoming signal from COMPUTER IN 1/ COMPONENT IN terminal.) (p15, 17, 47)
rS-VIDEO IN
Connect the S-VIDEO output from video equipment to this jack. (p16)
tAUDIO IN
Connect the audio output from video equipment connected to r or i to this
jack. (When the audio output is monaural, connect it to L (MONO) jack.) (p.16)
yAUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack. (p15 - 17)
This terminal outputs sound from AUDIO IN terminal (t or u).
uCOMPUTER/ COMPONENT AUDIO IN
Connect the audio output (stereo) from a computer or video equipment connected to w or e to this jack. (p15, 17)
iVIDEO IN
Connect the composite video output from video equipment to VIDEO jack. (p16)
Part Names and Functions
y t
u r
i e
w
oq
qSELECT button
–Execute the selected item. (p.20)
–Expand or compress the image in Digital zoom mode. (p.34)
wPOINT (ed78) buttons
–Select an item or adjust the value in the On-Screen Menu. (p.20)
–Pan the image in Digital zoom + mode. (p.34)
–Adjust the volume level. (Point 7 8 buttons) (p.23)
eKEYSTONE button
Correct the keystone distortion. (p.22, 42)
rPOWER indicator
Emit a red light until the projector gets ready to be turned on. It turns red when the projector is in the stand-by mode. It remains green while the projector is under operation. (p.18, 19, 61)
tLAMP REPLACE indicator
Turn yellow when the life of the projection lamp draws to an end. (p.55, 61)
yWARNING Temp.. indicator
Emit a red light when the projector detects an abnormal condition. This also blinks red when the internal temperature of the projector exceeds the operating range. (p.52, 61)
uPOWER ON/STAND-BY button
Turn the projector on or off. (p.18, 19)
iINPUT button
Select input source. (p.25, 35, 36)
oMENU button
Open or close the On-Screen Menu. (p.20)
10
Part Names and Functions
e w |
|
q |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
r
t
y
qPOWER ON/STAND-BY button
Turn the projector on or off. (p.18, 19)
wVIDEO button
Select VIDEO input source. (p.23, 35)
eCOMPUTER button
Select COMPUTER input source. (p.23, 25, 36)
rMENU button
Open or close the On-Screen Menu. (p20)
tPoint ed78 (VOLUME + / –) buttons
–Select an item or adjust the value in the OnScreen Menu. (p.20)
–Pan the image in Digital zoom + mode. (p.34)
–Adjust the volume level. (Point 78 buttons) (p.23)
ySELECT button
– Execute the selected item. (p.20)
!5 – Expand or compress the image in Digital zoom mode. (p.34)
uD..ZOOM ed buttons
Zoom in and out the images. (p.24, 34)
!4 i FREEZE button
Freeze the picture. (p.23)
|
!3 |
o NO SHOW button |
u |
|
Temporarily turn off the image on the screen. (p.24) |
|
!0LAMP CONTROL button |
|
|
!2 |
|
|
|
Select the lamp mode. (p.24, 48) |
|
!1 |
!1MUTE button |
|
|
Mute the sound. (p.23) |
|
|
!2P-TIMER button |
|
|
Operate the P-timer function. (p.24) |
|
|
!3IMAGE button |
|
|
Select the image level. (p.24, 30, 38) |
|
|
!4AUTO PC button |
|
|
Automatically adjust the computer image to its |
|
|
optimum setting. (p.24, 27) |
i o |
!0 |
!5KEYSTONE button |
|
|
Correct the keystone distortion. (p.22, 42) |
To ensure safe operation, please observe the following precautions:
– Do not bend, drop or expose the remote control to moisture or heat.
– For cleaning, use soft dry cloth. Do not apply benzene, thinner, splay or any chemical material.
11
Part Names and Functions
1 |
Open the battery |
2 |
Install new batteries |
3 |
Replace the |
|
compartment lid. |
|
into the compartment. |
|
compartment lid. |
Two AA size batteries
For correct polarity (+ and –), be sure
battery terminals are in contact with pins in the compartment.
To insure safe operation, please observe the following precautions: ● Use two (2) AA or LR6 type alkaline batteries.
●Always replace batteries in sets.
●Do not use a new battery with a used battery.
●Avoid contact with water or liquid.
●Do not expose the remote control to moisture or heat.
●Do not drop the remote control.
●If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.
●Risk of explosion if a battery is replaced by an incorrect type.
●Dispose of used batteries according to the instructions.
Point the remote control toward the projector (Infrared Remote Receiver) when pressing any button. Maximum operating range for the remote control is about 16.4' (5 m) and 60° in front of the projector.
16.4' |
30° |
(5 m) |
Remote control
30°
12
For projector positioning, see the figures below. The projector should be set horizontally to the flat screen.
Note:
•The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.
•The values shown below are approximate and may vary from the actual sizes.
A : B |
= |
9 : 1 |
|
34.4' (10.5 m) |
|
300" |
(Inch Diagonal) |
|
|
|
23.0' (7.0 m) |
|
Max.. Zoom |
||
|
|
|
|
|
|||
|
|
|
|
|
|
||
|
|
|
17.0' (5.2 m) |
|
200" |
|
Min.. Zoom |
|
|
11.5' (3.5 m) |
|
250" |
|||
|
|
|
|
|
|||
|
|
150" |
|
|
|
||
|
|
4.6' (1.4 m) |
|
166" |
|
A |
|
|
|
100" |
|
|
|
||
|
|
|
126" |
|
|
|
|
|
|
|
83" |
|
|
|
|
|
|
40" |
|
|
|
|
|
|
|
|
|
|
|
|
(Center) |
|
|
|
|
|
|
|
B |
Screen Size |
|
40" |
|
100" |
150" |
200" |
300" |
(W x H) mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 : 3 aspect ratio |
|
813 x 610 |
|
2032 x 1524 |
3048 x 2286 |
4064 x 3048 |
6096 x 4572 |
|
|
|
|
|
|
|
|
Zoom (min) |
|
5.2' (1.6 m) |
|
13.8' (4.2 m) |
20.7' (6.3 m) |
27.6' (8.4 m) |
41.3' (12.6 m) |
|
|
|
|
|
|
|
|
Zoom (max) |
|
|
|
11.5' (3.5 m) |
17.1' (5.2 m) |
23.0' (7.0 m) |
34.4' (10.5 m) |
|
4.6' (1.4 m) |
|
|||||
|
|
|
|
|
|
|
|
Projection angle can be adjusted up to 10.0 degrees with the adjustable feet.
1 |
Lift the front of the projector and press the feet lock |
2 |
latches on both sides of the projector. |
Release the feet lock latches to lock the adjustable |
|
|
feet and rotate the adjustable feet to adjust the |
3 |
position and tilt. |
To retract the adjustable feet, lift the front of the |
|
|
projector and press and undo the feet lock latches. |
Keystone distortion of the projected image can be corrected by menu operation. (p.22, 42)
Adjustable Feet |
Feet Lock Latches |
|
13
Installation
This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the projector with all peripheral equipment before turning the projector on. (See pages 15-17 for connection.)
Connect the AC power cord (supplied) to the projector.
The AC outlet must be near this equipment and must be easily accessible.
CAUTION
For safety, unplug the AC power cord when the projector is not in use. When this projector is connected to an outlet with the AC power cord, it is in Stand-by mode and consumes a little electric power.
NOTE ON THE POWER CORD
AC power cord must meet requirement of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side |
|
AC outlet side |
|
|
For the U..S..A.. and Canada |
For Continental Europe |
For the U..K.. |
|
Ground |
|
|
To power cord |
To the AC outlet. |
|
|
connector on your |
To the AC outlet. |
To the AC outlet. |
|
projector. |
(120 V AC) |
(200 - 240 V AC) |
(200 - 240 V AC) |
14
Installation
Cables used for connection
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)
• Audio Cables (Mini Plug: stereo)
(*One cable is supplied; other cables are not supplied with the projector.)
Audio Output |
Monitor Output |
Monitor Output |
External Audio Equipment |
||
|
or |
||||
|
|
Monitor Input |
|
|
|
|
VGA cable |
VGA cable |
Audio Input |
||
Audio cable |
|
|
|
|
|
(stereo) |
|
|
|
|
Audio cable |
|
COMPUTER IN 1/ |
|
COMPUTER IN 2/ |
(stereo) |
|
|
|
|
|||
|
COMPONENT IN |
|
MONITOR OUT |
This terminal is switchable. |
|
|
|
|
|
Set up the terminal as either |
|
|
|
|
|
Computer input or Monitor |
|
|
|
|
|
output. (See Page 47.) |
|
|
|
|
|
AUDIO OUT |
|
|
|
|
|
(stereo) |
|
|
COMPUTER/ |
|
|
|
|
|
COMPONENT |
|
|
|
|
|
AUDIO IN |
|
|
|
|
Note:
•Input sound to the COMPUTER/COMPONENT AUDIO IN terminal when using the COMPUTER IN 1/COMPONENT IN and the COMPUTER IN 2/ MONITOR OUT terminal as input.
•When connecting the AUDIO OUT to external audio equipment, the projector's built-in speaker is disconnected.
•When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1/ COMPONENT IN and not the COMPUTER IN 2/ MONITOR OUT.
Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.
15
Installation
Cables used for connection
• Video and Audio Cable (RCA x 3)
• S-VIDEO Cable
• Audio Cable (Mini Plug: stereo)
( Cables are not supplied with the projector.)
S-Video Output |
Composite Video and Audio Output |
|
|
(R) (L) |
(Video) |
|
|
External Audio Equipment |
S-Video cable |
Video and audio cable |
Audio Input
S-VIDEO |
(R) |
(L) |
(Video) |
|
AUDIO IN |
VIDEO |
|
|
|
|
Audio cable |
|
|
|
(stereo) |
|
|
|
AUDIO OUT |
|
|
|
(stereo) |
Note:
•When connecting AUDIO OUT to external audio equipment, the projector’s built-in speaker is disconnected.
Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.
16
Installation
Cables used for connection
• Audio Cables (Mini Plug :stereo)
• Scart-VGA Cable
• Component Cable
• Component-VGA Cable
( Cables are not supplied with the projector.)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Audio Output |
|
RGB Scart |
Component Video Output |
||||||||||||||||
|
|
|
|
|
|
21-pin Output |
|
(Y, Pb/Cb, Pr/Cr) |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Component |
|
External Audio Equipment |
|
cable |
|
|
Audio cable |
Scart-VGA |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
(stereo) |
cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Component-VGA |
Audio Input |
cable |
|
COMPUTER IN 1/COMPONENT IN |
|
Audio cable (stereo)
AUDIO OUT (stereo)
COMPUTER/
COMPONENT
AUDIO IN
Note:
•When connecting AUDIO OUT to external audio equipment, the projector's built-in speaker is disconnected.
•See page 64 for ordering optional parts.
Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.
17
1 |
Complete peripheral connections (with a computer, |
2 |
VCR, etc.) before turning on the projector. |
Connect the projector’s AC power cord into an AC |
|
3 |
outlet. The POWER indicator becomes red. |
Press the POWER ON/STAND-BY button on the |
|
|
top control or on the remote control. The POWER |
|
indicator becomes green and the cooling fans start |
|
to operate. The preparation display appears on the |
4 |
screen and the count down starts. |
After the countdown, the input source that was |
|
|
selected the last time and the Lamp mode status |
|
icon (see page 48) appears on the screen. |
If the projector is locked with a PIN code, PIN code Input Dialog Box appears. Enter the PIN code as instructed below.
To Enter a PIN code
Select a number by pressing the Point ed buttons, and then press the Point 8 button to fix the number and move the pointer. The number changes to " ". If you fixed an incorrect number, move the pointer to the number you want to correct by pressing the Point 7 button, and then select the correct number by pressing the Point ed buttons.
Repeat this step to complete entering a four-digit number.
"1234" is set as the initial PIN code at the factory.
After entering the four-digit number, move the pointer to "Set" by pressing the Point 8 button. Press the SELECT button so that you can start to operate the projector.
If you entered an incorrect PIN code, "PIN code" and the number ( ) turns red. Enter the correct PIN code all over again.
What is PIN code?
PIN (Personal Identification Number) code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector.
A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Setting on pages 49 and 50 for locking operation of the projector with your PIN code.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no longer be started. Set a new PIN code with special care, write it down in column on page 66 of this manual, and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service center.
18
16
The preparation display disappears after 30 seconds.
Selected Input Source and Lamp Mode
Lamp mode
(See page 48 for Lamp mode.)
PIN Code Input Dialog Box
After the OK icon disappears, you can operate the projector.
Note:
•When the Input Search function is set on On1 or On2, the input signal will be searched automatically (p.46)
•When the Logo select function is off, the logo is not shown on the screen. (p.43)
•When the "Countdown off" or "Off" is selected in the Display function, the countdown is not shown on the screen. (p.43)
•During the countdown period, all operations are invalid.
•If the correct PIN code number is not input for three minutes after the PIN code dialog box appeared, the projector is turned off automatically.
Basic Operation
1 Press the POWER ON/STAND-BY button on the top control or on the remote control, and a message "Power off?" appears on the screen.
2 |
Press the POWER ON/STAND-BY button again |
|
|
|
|
|
|
|
|
||
|
to turn off the projector.The POWER indicator |
|
|
|
|
|
starts to blink red, and it continues while the |
|
|
|
|
|
cooling fans are operating for about 90 seconds. |
|
|
|
|
|
The message disappears after 4 seconds. |
||||
|
(You can select the level of fan quietness and |
||||
|
rotation speed. See page 51.) |
|
|
|
|
|
At this time you can disconnect the AC power |
|
|
|
|
|
cord even if the fans are still running. |
|
|
|
|
3 |
When the projector has cooled down enough, the |
|
|
|
|
POWER indicator stops blinking and you can turn on the projector.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
DO NOT OPERATE THE PROJECTOR
C O N T I N U O U S LY W I T H O U T R E S T.
C O N T I N U O U S U S E M AT R E S U LT I N
SHORTENTING THE LAMP LIFE.TURN OFF
THE PROJECTOR AND GIVE IT A REST
ABOUT AN HOUR IN EVERY 24 HOURS.
Note:
•When the On start function is on, this projector is turned on automatically by connecting the AC power cord to an AC outlet. (p.48)
•The running speed of cooling fans is changed according to the temperature inside the projector.
•Do not put the projector in a case before the projector is cooled enough.
•If the WARNING TEMP. indicator blinks or emits a red light, see "Warning Temp. Indicator" on page 52.
•While the POWER indicator is blinking, lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to be turned on again.
•The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.
•The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal poweroff processing for fan cooling is completed, compared with the time the AC power cord is immediately unplugged after the power-off.
19
Basic Operation
The projector can be adjusted or set via the On-Screen Menu. Refer to the following pages regarding each adjustment and setting procedures.
1 |
Press the MENU button to display the On-Screen |
2 |
Menu. |
Press the Point 7 8 buttons to select a Menu icon |
|
|
to adjust and press the Point ed buttons to select |
|
an item to adjust. |
3 |
Press the SELECT button to show the item data. |
|
To adjust the data, press the Point 7 8 buttons. |
|
Refer to the following pages for each adjustment. |
To close the On-Screen Menu, press the MENU button again.
Note:
The selected item is not active until the SELECT button is pressed.
Top Control
POINT buttons
(outer ring)
MENU button SELECT button
Remote Control
MENU button POINT buttons
SELECT button
On-Screen Menu |
Menu icon |
|
|
Menu bar |
Pointer |
|
(red framed ) |
Pointer (red framed )
Press the Point ed buttons to move the pointer.
Item
SELECT button
Item data
Press the Point 78 buttons to adjust the value.
Quit
Exit this menu.
20
Basic Operation
For detailed functions, see Menu Tree on p.59,60.
For computer source
Guide Window |
PC System Menu |
Image Select Menu |
Screen Menu |
Setting Menu |
||||||||
Show the selected |
Used to select computer |
Used to select an |
Used to adjust size of |
Used to set |
||||||||
Menu of the |
system. (p.26) |
image level among |
image. [Normal / True |
the projector's |
||||||||
On-Screen Menu. |
|
|
Dynamic, Standard, |
/ Wide / Full screen |
operating |
|||||||
|
|
|
|
Real, Blackboard |
/ Digital zoom +/–] |
configurations. |
||||||
|
|
|
|
(Green), and Image |
(p.32, 34) |
(p.42-51) |
||||||
|
|
|
|
1 ~ 4. (p.30) |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Input |
|
Menu |
|
|
|
|
|
||
|
PC Adjust Menu |
Image Adjust Menu |
|||||||
Used to select |
Used to adjust |
Used to adjust computer |
|||||||
input source either |
parameters to match |
image.[Contrast / |
|||||||
Computer or |
with input signal |
Brightness / Color temp. |
|||||||
Video. (p.25) |
format. (p.27-29) |
/ White balance (R/G/B) |
|||||||
|
|
|
|
|
|
/ Sharpness / Gamma] |
|||
|
|
|
|
|
|
(p.31, 32) |
Sound Menu
Used to adjust the volume or mute the sound. (p.23)
For video source
Input Menu
Used to select input source either Video or Computer. (p.35, 36)
Image Select Menu
Used to select an image level among Dynamic, Standard, Cinema, Blackboard (Green) and Image 1 ~ 4. (p.38)
Screen Menu
Used to set size of image to Normal or Wide. (p.41)
Same function as menu for computer source.
|
|
|
|
|
|
|
|
|
|
|
|
AV System Menu |
Image Adjust Menu |
||||
Used to select system |
Used to adjust picture image. |
||||
of selected video |
[Contrast / Brightness / Color / Tint |
||||
source. (p.37) |
/ Color temp. / White balance (R/ |
||||
|
|
G/B) / Sharpness / Gamma / Noise |
|||
|
|
reduction / Progressive ] (p.39-40) |
Same function as computer menu.
21