Sanyo PLC-ZM5000L, PLC-ZM5000S, PLC-ZM5000 User Manual

Multimedia Projector

MODEL PLC-ZM5000 PLC-ZM5000L

 Projection lens is optional.

Network Supported

Refer to the Owner's Manual below for details about network function.

□ Network Set-up and Operation

Owner’s Manual

Features and Design

This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology.

This projector employs WUXGA LCD panels with 1,920x1,200 pixels, allowing it to project high resolution signals at their native resolution.

♦ Functionally Rich

This projector has many useful functions such as lens shifting, ceiling and rear projection,

perpendicular omnidirectional projection, a variety of lens options, etc.

♦ Multi-use Remote Control

Use the remote control as wired and wireless, or as a PC wireless mouse. Eight remote control codes and selectable pointer shapes are also available.

♦ Simple Computer System Setting

The projector has the Multi-scan system to conform to almost all computer output signals quickly (p.36). Supported resolution up to WUXGA.

♦ Direct OFF Function

With the Direct OFF function, you can disconnect the power cord from the wall outlet or turn off the breaker even during projection.(p.24)

♦ Security Function

The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the side control or remote control (p.61). PIN code lock function prevents unauthorized use of the projector. (pp.6162)

♦ Power Management

The Power management function reduces power consumption and maintains lamp life. (p.59)

♦ Automatic Filter Replacement Function

The projector monitors the condition of the filter and replaces a filter automatically when it detects the clogging.

♦ Picture in Picture Function

This projector is capable of projecting two images simultaneously by using either built-in P in P mode or P by P mode. (pp.55-56)

Note:

♦ Multilanguage Menu Display

Operation menu is available in 12 languages; English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, and Japanese. (p.51)

♦ Motor-driven Lens Shift

Projection lens can be moved up, down, right and left with the motor-driven lens shift function. This function makes it easy to provide projected image where you want. Zoom and focus can also be adjusted with a motor-driven operation. (p.17)

♦ Multiple Interface Terminals

The projector has many interface terminals that can support various types of equipment and signals. (p.11)

♦ Shutter Function

The projector is equipped with the shutter that provides complete blackness when the projected image is not needed with keeping the projector on. The shutter management function allows you to set the timer. It prevents from keeping the projector on when the shutter is closed for a long time. (p.63)

♦ Corner Correction

With the "Horizontal and vertical keystone correction function" and "Corner keystone correction function" of this projector, you can correct the keystone distortion even when projecting from the diagonal to the screen. (pp.31, 44, 50)

♦Network-capable

-Through an optional PJ-Net Organizer, you can project an image on a computer as well as operate and manage the projector via network.

-This projector is loaded with the Wired LAN network function. You can operate and manage the projector via network. For details, refer to the owner’s manual “Network Set-up and Operation.”

•The On-Screen Menu and figures in this manual may differ slightly from the product.

•The contents of this manual are subject to change without notice.

2

Table of Contents

Features and Design . . . . . . . . .		.	2. .	. . .		Wireless Mouse Operation			32
Table of Contents . . . . . . . . . . .		.			Input Selection . . . . . . . . . . .		.		. 33. . . . . .
			3. . . . . .			Direct Operation			33
To The Owner . . . . . . . . . . . . .		.
			4. . . . . . .
Safety Instructions . . . . . . . . . .	.		.5 .	. . .	.	Computer Input Source Selection			34
Air Circulation			6			Video Input Source Selection			35
					Computer Input . . . . . . . . . . . . . 36. . . . . .
Installing the Projector in Proper Directions			7
						Computer System Selection			36
Moving the Projector			8
						Auto PC Adjustment			37
Cautions in Handling the Projector			8
						Manual PC Adjustment			38
Compliance . . . . . . . . . . . . . . .
			.9 . . . . . . .						40
Part Names and Functions . . . . .	. 10. . .					Image Level Selection
						Image Adjustment			41
Front			10
						Screen Size Adjustment			42
Back			10
					Video Input . . . . . . . . . . . . .		.		. 45. . . . . . .
Bottom			10
						Video System Selection			45
Rear Terminal			11
						Image Level Selection			46
Side Control and Indicators			12
						Image Adjustment			47
Remote Control			13
						Screen Size Adjustment			49
Remote Control Battery Installation			15
					Setting . . . . . . . . . . . . . . .		. .		.51. . . . . . .
Remote Control Receivers and Operating Range			15
						Setting			51
Wired Remote Control Transmitter			15
					Maintenance and Care . . . . . . .		.	. 66. . . .
Remote Control Code			16
Adjustable Feet			16			Filter Instructions			66
Installation . . . . . . . . . . . . . . .						Replacing the Filter Cartridge			67
		.17. . . . . . .
Positioning the Projector			17			Resetting the Filter Counter			68
						Resetting the Scroll Counter			68
Lens Shift Adjustment			17
						Lamp Replacement			69
Lens Installation			18
						Cleaning the Projection Lens			71
Connecting to a Computer
						Cleaning the Projector Cabinet			71
(Digital and Analog RGB)			19
						Warning Indicators			72
Connecting to Video Equipment
					Appendix . . . . . . . . . . . . . .		.	. 73. . . . . . .
(Video, S-video, HDMI)			20
Connecting for Audio Signal			21			Troubleshooting			73
Connecting the AC Power Cord			22			Menu Tree			76
Basic Operation . . . . . . . . . . .	.	23. . .		. .	.	Indicators and Projector Condition			79
Turning On the Projector			23			Compatible Computer Specifications			82
						Technical Specifications			84
Turning Off the Projector			24
						Optional Parts			85
How to Operate the On-Screen Menu			25
						Lens Replacement			85
Main Menu			26
						PJ Link Notice			85
Operating with Projector Control			27
						Configurations of Terminals			86
Sound Adjustment			28
						PIN Code Number Memo			87
Operating with Remote Control			29
						Dimensions			88
Keystone Correction			31
						List of Picture in Picture			89
Pointer Function			32
						Serial Control Interface			89

Trademarks

Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation.

3

To The Owner

Before installing and operating the projector, read this manual thoroughly.

The projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in good condition for many years to come.

Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section in the back of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION :TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).. NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT.. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL..

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT..

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT..

FOR EU USERS

The symbol mark and recycling systems described below apply to EU countries and do not apply to countries in other areas of the world.

Your product is designed and manufactured with high quality materials and components which can be recycled and/or reused.

The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste.

Note:

If a chemical symbol is printed beneath the symbol mark, this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead.

In the European Union there are separate collection systems for used electrical and electronic equipment, batteries and accumulators.

Please, dispose of them correctly at your local community waste collection/ recycling centre.

Please, help us to conserve the environment we live in!

Safety Precaution

WARNING: ● THIS APPARATUS MUST BE EARTHED..

●TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE..

–This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam.

–Install the projector in a proper position. Otherwise it may result in a fire hazard.

–Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The diagrams shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained.

SIDE and TOP

REAR

0.7’(20cm)

1.5’(50cm)

3’(1m)

3’(1m)

–Do not cover the ventilation slots on the projector. Heat build-up can shorten the service life of your projector, and can also be dangerous.

–If the projector is unused for an extended time, unplug the projector from the power outlet.

–Do not project the same image for a long time. The afterimage may remain on the LCD panels by the characteristic of panel.

CAUTIONONHANGINGFROMTHECEILING

Do not set the projector in greasy, wet, or smoky conditions such as IN a kitchen to prevent A Breakdown or a disaster.. If the projector comes in contact with oil or chemicals, it may become deteriorated..

CAUTION

Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/

Data Processing Equipment, ANSI/NFPA 75.

READ AND KEEP THIS OWNER’S MANUAL FOR LATER USE..

4

Safety Instructions

All the safety and operating instructions should be read before the product is operated.

Read all of the instructions mentioned here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

Follow all warnings and instructions marked on the projector.

For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.

Do not expose this unit to rain or operate it near water for example, in a wet basement, near a swimming pool, etc...

Do not use attachments not recommended by the manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a

mounting kit approved by the

manufacturers.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Slots and openings in the back and side of the cabinet are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating.

The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.

This projector should not be placed in a built-

in installation such as a book case unless proper ventilation is provided.

Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector.

Do not install the projector near the ventilation duct of air-conditioning equipment.

This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.

Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.

Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power cord or plug is damaged or frayed.

b.If liquid has been spilled into the projector.

c.If the projector has been exposed to rain or water.

d.If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation.

e.If the projector has been dropped or the cabinet has been damaged.

f.When the projector exhibits a distinct change in performance-this indicates a need for service.

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.

Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.

NOTE FOR CUSTOMERS IN THE US

Hg LAMP(S) inside this product contain mercuryand must be recycled or disposed ofaccording to local, state or federal laws.

5

Safety Instructions

Air Circulation

Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

–Do not put any flammable object or spray can near the projector, as hot air is exhausted from the air vents.

–Keep the exhaust vent at least 3' (1 m) away from any objects.

–Do not touch peripheral parts of the exhaust vent, especially screws and metallic parts. These areas will become hot while the projector is being used.

–Do not put anything on the cabinet. Objects put on the cabinet will not only get damaged but also may cause fire hazard by heat.

Cooling fans are provided to cool down the projector. The fans’ running speed is changed according to the temperature inside the projector.

Air Intake Vent

Exhaust Vent (Hot air exhaust)

Air flow

IMPORTANT!

Filter Maintenance!!

The projector uses a lamp which generates significant heat. The cooling fans and air vents are provided to dissipate the heat by drawing air into the housing and the filter is located in the intake vents to prevent dust from getting inside of the projector.

In order to care for the projector appropriately, regular cleaning is required. Remove any dirt or dust that has accumulated on the projector.

If the projector reaches a time set in the timer setting, a Filter replacement icon (Fig. 1) appears on the screen and WARNING FILTER indicator on the top panel lights up (see below), indicating that the filter replacement is necessary.

If the projector detects that the filter is clogged and no scroll is left in the filter cartridge, a Filter cartridge replacement icon (Fig. 2) appears on the screen and WARNING FILTER indicator on the top

panel lights up (see below). Stop using the projector immediately and replace the filter cartridge.

Blocking the air vents and leaving the projector uncleaned for a long time may not only damage the projector and may require costly repairs but may also cause accidents or fire.

For maintenance of the filter, refer to “Filter counter” on page 65 and “Maintenance and Care” on pages 66-68.

Damages to the projector caused by using an uncleaned filter or improper maintenance will void the warranty on the projector..

Top Panel

Fig.. 1 Filter replacement icon

WARNING	Fig.. 2 Filter cartridge
FILTER	replacement icon
indicator

6

Safety Instructions

Installing the Projector in Proper Directions

Use the projector properly in specified positions. Improper positioning may shorten the lamp life and result in severe accidents or fire hazard.

This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane. When installing the projector in downwardly inclined position, install the projector bottom side up.

Note:

To inverse or reverse the image, set the ceiling function to On. (pp. 44, 50)

Positioning Precautions

Avoid positioning the projector as described below when installing.

10˚

10˚

Do not tilt the projector more	10°	10°	In upward projection, do
than 10 degrees from side to			not tilt the projector over 10
side.			degrees right and left.
Do not put the projector on			In downward projection, do
either side to project an image.			not tilt the projector over 10
			degrees right and left.

10° 10°

CAUTION ON CEILING MOUNTING

For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector does not cover any damage caused by use of any nonrecommended ceiling mount kit or installation of the ceiling mount kit in an improper location.

Cautious use of equipment with laser technology

Do not radiate strong light such as laser light on the projection lens directly, as this may degrade the functionality of the projector, and will void any applicable warranties.

7

Safety Instructions

Moving the Projector

Notes on protector

Remove the protector on the lens before use, and keep it for later use. For transportation, press and hold the LENS button or LENS SHIFT button for more than 5 seconds to make the lens return to the central position, and then attach the protector to protect the lens. (Only for PLC-ZM5000)

Protector

Use the handle grip when moving the projector.

Retract the adjustable feet to prevent damage to the lens and cabinet when carrying.

When this projector is not in use for an extended period, put it into a suitable case to protect the projector.

CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR

–Do not drop or bump the projector, otherwise damages or malfunctions may result.

–When carrying the projector, use a suitable carrying case.

–Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.

–Do not put the projector in a case before it is cooled enough.

Cautions in Handling the Projector

Do not hold the lens or the lens compartment tube when lifting or moving the projector. Doing so may cause damage to the lens and the projector.

Care must be taken when handling the projector; do not drop, bump, subject it to strong forces, or put other things on the cabinet.

CAUTION

Do not hold the lens and the peripheral part.

Projection lens is a motorized lens. Please note the followings when using the projector.

●Do not touch the lens while it is moving as this could cause injury to the fingers.

●Never allow children to touch the lens.

8

Compliance

Federal Communications Commission Notice

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Model Number	: PLC-ZM5000, PLC-ZM5000L
Trade Name	: Sanyo
Responsible party	: SANYO NORTH AMERICA CORPORATION
Address	: 21605 Plummer Street, Chatsworth, California 91311, U.S.A.
Telephone No.	: [phone]

AC Power Cord Requirement

The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

AC Power Cord for the United States and Canada:

AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).

AC Power Cord has a grounding-type AC line plug. This is a safety feature to be
sure that the plug will fit into the power outlet. Do not try to defeat this safety feature.
Should you be unable to insert the plug into the outlet, contact your electrician.	GROUND

AC Power Cord for the United Kingdom:

This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus ASA . If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions.

If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted.

WARNING: A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET..

The Wires in this mains lead are coloured in accordance with the following code: Green-and-yellow ············· Earth

Blue ······························ Neutral Brown ···························· Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow.

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

WARNING: THIS APPARATUS MUST BE EARTHED..

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE..

9

Part Names and Functions

Front

Back

Bottom

Lens Release Button

Indicators

Lamp Cover

Speaker

Lens Cap

(for PLC-ZM5000)

Projection Lens

(for PLC-ZM5000)

CAUTION

Do not cover the light beam in front of the lens. High temperature from light beam may damage the lens.

Lens Mount Cover

(for PLC-ZM5000L)

Infrared Remote Receiver (Front & Top)

Side Controls

Exhaust Vent

CAUTION

Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.

Infrared Remote Receiver (Back)

Terminals and Connectors

Filter Cover & Air Intake Vent

Power Cord Connector

Rear Cover (Optional Parts Attachment)

Hand Grip

Security Chain Hook

Note:

This is not a handle for carrying the projector.

Do not carry the projector with this hook.

Adjustable Feet

10

Part Names and Functions

Rear Terminal

							

Infrared remote receiver (Back)

The infrared remote receiver is also located in the front and top (pp.10, 15).

LAN CONNECTION TERMINAL

Connect the LAN cable (refer to the owner’s manual of “Network Set-up and Operation”).

ANALOG OUT TERMINAL

This terminal can be used to output the incoming analog RGB signal from INPUT 1-3 terminal to the other monitor (pp.19-20).

ANALOG (COMPUTER INPUT TERMINAL)

Connect the computer (or RGB scart) output signal to this terminal (pp.19-20).

AUDIO OUTPUT JACK (VARIABLE)

This jack outputs the audio signal from computer, video, HDMI equipment or 5 BNC INPUT jacks to external audio equipment (p.21).

R/C JACK

When using the wired remote control, connect the wired remote control to this jack with a remote control cable (not supplied) (p.15).

HDMI TERMINAL

Connect the HDMI signal (including sound signal) from video equipment or the DVI signal from computer to this terminal (pp.19, 20).

is registered trademarks of HDMI Licensing, LLC.

DIGITAL (DVI-D) TERMINAL

Connect the computer output digital signal to this terminal. The HDTV (HDCP compatible) signal can also be connected (pp.19-20).

 Kensington Security Slot

This slot is for a Kensington lock used to deter theft of the projector.

*Kensington is a registered trademark of ACCO

Brands Corporation.

5 BNC INPUT JACKS

Connect the component or composite video output signal from video equipment to VIDEO/Y, and Pr/Cr.jacks or connect the computer output signal(5 BNC Type [Green, Blue, Red, Horiz. Sync, and Vert. Sync.]) to G, B, R, H/V, and V jacks (pp.19-20).

S-VIDEO INPUT JACK

Connect the S-VIDEO output signal from video equipment to this jack (p.20).

VIDEO INPUT JACK

Connect the component or the composite video output signal from video equipment to these jacks (p.20).

AUDIO 3 JACKS (L(MONO)/R)

Connect the audio output (stereo) signal from video equipment connected to INPUT 3 jacks (p.21). For a monaural audio signal (a single audio jack), connect it to the L (MONO) jack.

AUDIO 1 JACK

Connect the audio output (stereo) signal from a computer connected to INPUT 1 terminals. (p.21)

AUDIO 2 JACK

Connect the audio output (stereo) signal from 5 BNC INPUT jacks (INPUT 2 jacks).

(p.21)

CONTROL PORT CONNECTOR

When controlling the projector with RS-232C, connect the control equipment to this connector with the serial control cable (p.19).

USB CONNECTOR (Series B)

Use this connector when controlling a computer with the remote control of the projector. Connect the USB terminal of your computer to this connector with a USB cable (p.19).

11

Part Names and Functions

	Side Control and Indicators
Side Control		Indicators (on the top panel)

ON/STAND-BY button

Turn the projector on or off (pp.23-24).

MENU button

Open or close the On-Screen Menu (p.25).

SELECT button

–Execute the selected item (p.25).

–Expand or compress the image in the Digital zoom mode (p.43).

SHUTTER button

Close and open up the built-in shutter (p.27).

Point ▲▼◄► ( VOLUME – / + ) buttons

–Select an item or adjust the value in the On-Screen Menu (p.25).

–Pan the image in Digital zoom + mode (p.43).

–Adjust the volume level (with Point ◄► buttons) (p.28).

LENS button

Enter the focus, zoom, and lens shift adjustment mode (p.27).

INPUT button

Select an input source (pp.33-35).

POWER indicator

–Light green while the projector is in standby mode.

–Light green during operations.

–Blink green in the Power management mode (p.59).

LAMP indicator

Light red during operations.

WARNING TEMP.. indicator

Blink red when the internal temperature of the projector exceeds the operating range (pp.72, 79-80).

WARNING FILTER indicator

–Blink slow when the filter is being scrolled (pp.66, 79).

–Blink fast when the filter scroll is not working properly or the filter cartridge is not installed (pp.66, 81).

–Light orange when the clogging of the filter is detected or the filter counter reaches

a time set in the timer setting, urging immediate filter/ filter cartridge replacement (pp.65, 66, 81).

SHUTTER indicator

Light blue when the shutter is closed (p.79).

LAMP REPLACE indicator

Light orange when the projection lamp reaches its end of life (pp.69, 80).

12

Part Names and Functions

Remote Control

	STAND-BY button	R-CLICK button
	Turn the projector off (p.24).	Act as the right mouse button for wireless
		mouse operation (p.32).
	Signal Emission indicator	SELECT button
	Light red while a signal is being sent from the
	remote control to the projector.	– Execute the selected item (p.25).
		– Expand or compress the image in the Digital
	ON button	zoom mode (p.43).
	Turn the projector on (p.23).	MOUSE POINTER button
	SHUTTER button	Move a pointer of the projector or a pointer for
		wireless mouse operation (p.32).
	Close and open up the built-in shutter (pp.27,
	29).	AUTO PC button
	MENU button	Automatically adjust the computer image to its
		optimum setting (pp.29, 37).
	Open or close the On-Screen Menu (p.25).
	Point ▲▼◄►( VOLUME – / +, MUTE)	INPUT button
		Select a signal (pp.33-35).
	buttons
	– Select an item or adjust the value in the
	On-Screen Menu (p.25).	To ensure safe operation, observe the
	– Pan the image in Digital zoom + mode (p.43).
	– Adjust the volume level (with Point ◄►	following precautions:
	buttons) or mute the sound (with Point ▼	– Do not bend, drop, or expose the remote control
	button) (p.28).
		to moisture or heat.
		– For cleaning, use a soft dry cloth. Do not apply
	L-Click button	benzene, thinner, spray, or any other chemical
	Act as the left mouse button for wireless mouse	materials.
	operation (p.32).

13

Part Names and Functions

		Remote Control
			For PIN code
			and remote
			control code.

P-TIMER button

Operate the P-timer function (pp.30, 60).

IMAGE SEL.. button

Operate the image selection function (pp.40, 46).

FREEZE button

Freeze the picture on the screen (p.30).

LENS SHIFT button

Select the Lens Shift function (p.29).

ZOOM buttons

Zoom in and out the images (p.29).

PIP button

Operate the Picture in Picture function (pp.30, 55-56).

ON/OFF switch

When using the remote control, set this switch to “ON”. Set it to “OFF” for power saving when it is not in use (p.16).

Wired Remote jack

Connect the remote control cable (not supplied) to this jack when using as a wired remote control.

FILTER button

Scroll the filter (p.30).

FOCUS buttons

Adjust the focus (p.29).

INFO.. button

Display the input source information (p.29).

KEYSTONE button

Correct keystone distortion (pp.31, 44, 50).

D..ZOOM button

Select the Digital zoom +/- mode and resize the image (p.43).

INPUT 1- 3 buttons

Select an input source (INPUT 1 – INPUT 3) (pp.33-35).

IMAGE ADJ.. button

Operate the image adjustment function (pp.4142, 47-48).

SCREEN button

Select the screen size (p.29).

POINTER button

Act as the On-Off switch for the Pointer (pp.30, 32, 60).

Number buttons

Act as number buttons. Use these buttons when setting the remote control codes (p.16) or when entering the PIN code numbers (pp. 23, 54, 62).

14

Part Names and Functions

Remote Control Battery Installation

1	Open the battery	2	Install new batteries into	3	Replace the
	compartment lid.		the compartment.		compartment lid.

Two AAA size batteries

For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment.

To ensure safe operation, please observe the following precautions :

● Use two (2) AAA or LR03 type alkaline batteries.

●Always replace batteries in sets.

●Do not use a new battery with a used battery.

●Avoid contact with water or liquid.

●Do not expose the remote control to moisture or heat.

●Do not drop the remote control.

●If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.

●Risk of an explosion if battery is replaced by an incorrect type.

●Dispose of used batteries according to the instructions or your local disposal rule or guidelines.

Remote Control Receivers and Operating Range

Point the remote control toward the projector (to Infrared Remote Receivers) when pressing the buttons. Maximum operating range for the remote control is about 16.4’ (5 m) and 60 degrees in front, back and top of the projector.

Infrared Remote Receivers are provided in front, back and top of the projector. You can conveniently use all of the receivers (pp. 10, 11, 59).

Note:	16.4’
	(5 m)

When hanging the projector from the ceiling, select the Infrared Remote Receiver which is located farther away from the fluorescent light (p.59).

16.4’ (5 m)

Wired Remote Control Transmitter

The remote control can be used as a wired remote control. Wired remote control helps you use the remote control outside of the operating range (16.4’/ 5 m). Connect the remote control and the projector with the remote control cable (sold separately). Connected with the remote control cable, the remote control does not emit wireless signal.

15

Part Names and Functions

Remote Control Code

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are being operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 58.

MENU button

1Press and hold the MENU and a number button (1–8) for more than five seconds to switch among the codes.

2To reset the remote control code, press and hold the MENU and the number button 0 for more than five seconds.

Number buttons (1-8)

ON/OFF

Switch

Press and hold the MENU and a number button (1-8) that corresponds to the remote control code for more than five seconds to switch among the codes.

Adjustable Feet

Projection angle can be adjusted up to 4.0 degrees with the adjustable feet.

Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector, rotate the feet of both clockwise.

To lower the projector or to retract the adjustable feet, rotate the feet of both counterclockwise.

Adjustable

Feet

16

Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. (for PLC-ZM5000)

Note:

•The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.

•All measurements are approximate and may vary from the actual sizes.

78.6' (24.0 m)

(Inch Diagonal)

46.1' (14.0 m)

34.6' (10.5 m)

400''

400''

Max. Zoom

23.0' (7.0 m)

300''

11.4' (3.5 m)

200''

236''

Min. Zoom

4.5'(1.4 m)

177''

100''

118''

40''

59''

(Center)

Screen Size		40''		100''	200''	300''	400''
(W x H) mm
16:10 aspect ratio		862 x 538		2154 x 1346	4308 x 2692	6462 x 4039	8616 x 5385
Zoom (max.)		4.5'(1.4 m)		11.4' (3.5 m)	23.0' (7.0 m)	34.6'(10.5 m)	46.1'(14.0 m)
Zoom (min.)		7.7'(2.4 m)		19.5' (5.9 m)	39.2' (12.0 m)	58.9' (18.0 m)	78.6' (24.0 m)

Lens Shift Adjustment

Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function makes the positioning of images easy on the screen. (See page 27)

The display position can be shifted upward up

to 60% elevation of the display.

The display position can be shifted downward up to 60% low level of the display.

When the lens is shifted to top.

The display position can be shifted to the left in up to 10% width of the display.

When the lens is shifted to bottom.

The display position can be shifted to the right in up to 10% width of the display.

When the lens is shifted to leftmost. When the lens is shifted to rightmost.

Lens shift adjustable range

60%

10%

Lens shift center Shift range position

17

Installation

Lens Installation

When replacing the lens or using an optional lens, install the lens by following the instructions below.

Ask the sales dealer for detailed information of the optional lens specifications.

Removing the lens
1	Shift the lens to the central position by using the	Lens release button
	Lens shift function (p.27).
2	Turn off the projector and unplug the AC power
	cord.
3	While pressing the Lens release button on the top

of the cabinet, turn the lens counterclockwise until it stops and pull it out slowly from the projector.

CAUTION

Be careful when handling the lens. Do not drop.

Attaching the lens to the projector

1 Remove the lens mount cover.

Red 2 Fit the lens to the projector by aligning the red dot dots

on the lens with the red dot of the projector.

3 Slowly turn the lens clockwise until it clicks. Make sure that the lens is fully inserted to the projector.

CAUTION

Do not press the lens release button when attaching the lens.

NOTES ON LENS INSTALLATION

●Do not touch or remove any parts except the lens and related parts. It may result in malfunctions, electrical shock, fire hazard or other accidents.

●Before installing or replacing the lens, check that the Model No. of the Projection Lens matches with the projector.

●For details of the lens and installation, contact the sales dealer where you purchased the projector.

18

Installation

Connecting to a Computer (Digital and Analog RGB)

Cables used for connection ( = Cables not supplied with this projector.)

• VGA Cable (One cable is supplied.)
• HDMI-DVI cable 			• Serial Cross cable 
• BNC cable 			• USB cable 

	Monitor			Monitor
	Output	Monitor Input		Output
	BNC	VGA	VGA
		cable	cable
	cable
	G B R H/V V	ANALOG		ANALOG
		OUT		IN

DVI

Monitor

Serial

USB

Output

Output

out

port

HDMI-	DVI-	Serial	USB
DVI	Digital	Cross
cable	cable	cable	cable

HDMI DIGITALCONTROL USB

IN PORT

Unplug the power cords of both the

See the next page for the signals that can output

projector and external equipment

to the ANALOG OUT terminal.

from the AC outlet before connecting

cables.

19

Installation

Connecting to Video Equipment (Video, S-video, HDMI)

Cables used for connection ( = Cables not supplied with this projector.)

•Video cable (RCA x 1 or RCA x 3) 

•BNC cable (BNC x 1 or BNC x 3) 

• S-video cable 

Analog Out Signal Table

• Scart-VGA cable 

• HDMI cable 

Input Terminal

Monitor Out

Cable

D-sub15

RGB (PC analog)

YES

RGB (SCART)

NO

Input 1

DVI

RGB (PC digital)

NO

RGB (AV HDCP)

NO

HDMI

HDMI

NO

Unplug the power

RGB

YES

Input 2

5 BNC

Video

YES



cords of both the

Y, Pb/Cb, Pr/Cr

YES



projector and external

RCA

Y, Pb/Cb, Pr/Cr

YES



equipment from the

Input 3

S-video

S-video

NO

Video

Video

YES



AC outlet before

Network

NO

connecting cables.

A cable with one end D-sub 15 and the other end (Black box) compatible with each equipment is necessary.

	Component Video
					RGB Scart				Digital Output
Composite Output (Y, Pb/Cb, Component			Composite	S-video		HDMI
					21-pin					(HDCP
Video	Pr/Cr)	Video Output	Video	Output	Output	Output				compatible)

			Refer to the
			Analog Out
			Signal Table			Scart-
	BNC	RCA	(above).	S-video				HDMI	DVI-Digital
	cable	cable		cable		VGA		cable	cable
						cable
Video	Y - Pb/	Y - Pb/ Video	ANALOG	S-VIDEO	ANALOG		HDMI		DIGITAL
	Cb - Pr/Cr	Cb - Pr/Cr	OUT			IN			IN

20

Installation

Connecting for Audio Signal

Cables used for connection ( = Cables not supplied with this projector.)

• Audio cables 

External Audio Equipment

Audio Output

Audio

Output (R) (L) (R) (L)

Audio Input

	Audio	Audio	Audio
	cable	cable
			cable
	(stereo)	(stereo)		Audio
				cable
				(stereo)
	AUDIO IN 1/2		(R)	(L)

AUDIO OUT

(stereo)

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

21

Installation

Connecting the AC Power Cord

This projector uses nominal input voltages of 100–240 V

AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

If you are not sure of the type of power being supplied, consult your authorized dealer or service center.

Connect the projector with all peripheral equipment before turning on the projector.

CAUTION

The AC outlet must be near this equipment and must be easily accessible.

Note:

Unplug the AC power cord when the projector is not in use. When the projector is connected to an outlet with AC power cord, it is in stand-by mode and consumes a little electric power.

Connect the AC power cord (supplied) to the projector.

NOTE ON THE POWER CORD

AC power cord must meet the requirements of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

Projector side		AC Outlet side
	For the U..S..A.. and Canada	For Continental Europe	For the U..K..
	Ground		Ground
To POWER CORD
CONNECTOR on	To the AC Outlet.	To the AC Outlet.	To the AC Outlet.
your projector.	(120 V AC)	(200–240 V AC)	(200–240 V AC)

22

Basic Operation

Turning On the Projector

1Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector.

2Connect the projector’s AC power cord into an AC outlet. The LAMP indicator lights red and the POWER indicator lights green.

3Press the ON/STAND-BY button on the side control or the ON button on the remote control. The LAMP indicator dims and the cooling fans start to operate. The preparation display appears on the screen and the countdown starts.

4After the countdown, the input source that was selected the last time and the Lamp control status icon (see page 57) appear on the screen.

If the projector is locked with a PIN code, PIN code input dialog box will appear.

Note:

•When the Logo select function is set to Off, the logo will not be shown on the screen (p.52).

•When Countdown off or Off is selected in the Display function, the countdown will not be shown on the screen (p.52).

•When the Input button function is set to Mode 3, the input signal will be searched automatically (p.51).

•If you press the ON/STAND-BY button on the side control or the remote control during the countdown period, you can skip the countdown and go to the normal operations. In this case, however, the brightness of the image needs some time to stabilize after turning on the projector. The display may flicker after turning on the lamp for the characteristics of the lamp. This is normal operation and not a malfunction.

Enter a PIN code

Use the Point ▲▼ buttons on the side control or Number buttons on the remote control to enter a number.

When using side control

Use the Point ▲▼ buttons on the side control to select a number. Press the Point ► button to fix the number and move the red frame pointer to the next box. The number changes to . Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to “Set”. Press the SELECT button so that you can start to operate the projector.

When using remote control

Press the Number buttons on the remote control to enter a number (p.14). When you complete entering a four-digit number, the pointer moves to “Set”. Press the SELECT button so that you can start to operate the projector.

If you fix an incorrect number, use the Point ◄ button to move the pointer to the number you want to correct, and then enter the correct number.

If you entered an incorrect PIN code, “PIN code” and the number () will turn red for a moment. Enter the correct PIN code all over again.

16

The preparation display will disappear after 30 seconds.

Selected Input Source and Lamp control

Input 1

RGB(PC analog)

Lamp control status

(See page 57 for Lamp control status.)

Note:

•The Lamp replacement icon and the Filter replacement or the Filter cartridge replacement icon may appear on the screen depending on the usage state of the projector.

•When the filter cartridge replacement icon keeps appearing on the screen at turning on the projector for some time and no action is taken to replace the filter cartridge, the projector will be automatically shut down in 3 minutes after turning on to protect the projector. (pp. 66-68, 81)

•When the Picture in Picture function is set to User 1-5, User 1-5, Input source, Lamp control status, Lamp replacement icon and Filter warning icon will appear on the screen for 10 seconds.

PIN Code Input Dialog Box

After the OK icon disappears, you can operate the projector.

Note:

•If the PIN code number is not entered within three minutes after the PIN code dialog box appears, the projector will be turned off automatically.

•The "1234" is set as the initial PIN code at the factory.

23

Basic Operation

What is PIN code?

PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector.

A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Setting Menu on pages 61-62 for locking operation of the projector with your PIN code.

CAUTION ON HANDLING PIN CODE

If you forget your PIN code, the projector can no longer be started. Take a special care in setting a new PIN code; write down the number in a column on page 87 of this manual and keep it on hand. Should the PIN code be missing or forgotten, consult your dealer or service center.

Turning Off the Projector

1Press the ON/STAND-BY button on the side control or the STAND-BY button on the remote control, and after the countdown is over, Power off? appears on the screen.

2Press the ON/STAND-BY button on the side control or the STAND-BY button on the remote control again to turn off the projector. The LAMP indicator lights bright and the POWER indicator turns off. After the projector is turned off, the cooling fans operate for 90 seconds. You cannot turn on the projector during this cooling down period.

3When the projector has cooled down enough, the POWER indicator lights green and then you can turn on the projector. To unplug the AC power cord, wait until the projector is completely cooled down.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST FIVE MINUTES BEFORE TURNING IT OFF.

DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS.

Direct OFF Function

You can disconnect the power cord from the wall outlet or turn off the breaker even during projection without pressing the ON/STAND-BY button.

Note:

When using the Direct OFF function, you can not restart the projector immediately after the power is disconnected. If the external power supply is suddenly cut off, the fan stops immediately. The lamp remains high temperature and needs to be cooled.

Power off? disappears after 4 seconds.

Note:

If the ON button on the remote control is pressed, the time countdown will be brought to an end without appearing Power off? afterwards on the screen.

Note:

•When the Direct On function is set to On, the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.60).

•The running speed of cooling fans is changed according to the temperature inside the projector.

•Do not put the projector in a case before the projector is cooled enough.

•If the WARNING TEMP. indicator blinks red, see “Warning Indicators” on page 72.

•The projector cannot be turned on during the cooling period with the POWER indicator turned off. You can turn it on again after the POWER indicator becomes green again.

24

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen Menu. The menu has a hierarchical structure, with

a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual.

1Press the MENU button on the side control or the remote control to display the On-Screen Menu.

2Use the Point ▲▼ buttons to highlight or select a main menu item. Press the Point ► or the

SELECT button to access the submenu items. (The selected item is highlighted in orange.)

3Use the Point ▲▼ buttons to select the desired submenu item and press the SELECT button to set or access the selected item.

4Use the Point ▲▼◄► buttons to adjust the setting or switch between each option and press the SELECT button to activate it and return to the submenu.

5Press the Point ◄ button to return to the main menu. Press the MENU button to exit the On-Screen Menu.

Side Control

MENU button

SELECT button

POINT buttons

Remote Control

MENU button

POINT buttons SELECT button

On-Screen Menu

Dynamic

Point

►or SELECT button

The currently	The selected item is
set item is
marked.	highlighted in orange.
Dynamic

25

Basic Operation

	Main Menu
For detailed functions of each menu, see “Menu Tree” on pages 76-78.
Main Menu	Sub-Menu

        



 Input

Used to select an input source (Input 1, Input 2, Input 3 or Network) (p.33).

Note: Network will not be displayed when optional PJ-Net Organizer is not attached.

 PC adjust

Used to adjust the parameters to match with the input signal format (pp.37-39).

Image select

For computer source, used to select an image level among Dynamic, Standard, Real, and Image 1-10 (p.40).

For Video source, used to select an image level among Dynamic, Standard, Natural, Cinema, and

Image 1-10 (p.46).

Image adjust

For computer source, used to adjust the computer image. [Contrast/Brightness/Iris/Color temp../White balance (R/G/B)/Offset(R/G/B)/Sharpness/Gamma/Reset/Store] (pp.41-42).

For video or HDMI source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Iris/Color temp../White balance (R/G/B)/Offset (R/G/B)/Sharpness/Gamma/Noise Reduction/Progressive/ Reset/Store] (pp.47-48).

Screen

For computer source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/True/

Custom/Custom adj../Digital zoom +/-/Keystone/Ceiling/Rear/Screen aspect/Reset] (pp.42-44).

For video or HDMI source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/Natural

Wide/Custom/Custom adj../Keystone/Ceiling/Rear/Screen aspect/Reset] (pp. 49-50).  Sound

Used to adjust the volume or mute the sound (p.28).

 Setting

Used to set the projector’s operating configurations (pp.51-65).

 Information

Display the input source information: Input, System, H-sync freq.., V-sync freq.., Screen, Language, Lamp status, Lamp counter, Filter counter, Power management, Key lock, PIN code lock, Shutter management, Simple mode, Remote control, and SERIAL NO.. (p.29).

 Network

See the owner’s manual of “Network Set-up and Operation”.

 Guide

The key operation is displayed.

26

Basic Operation

Operating with Projector Control

Lens Operation

Side Control

The following lens operation can be made with the LENS button on the side control.

Press the LENS button to enter each lens operation mode. The selected adjustment display appears on the screen.

Zoom → Focus → Lens Shift → ……

Zoom Adjustment

Display Zoom on the screen. Use the Point ▲▼ buttons to zoom in and out the image.

Focus Adjustment

Display Focus on the screen. Use the Point ▲▼ buttons to adjust focus of the image.

Lens Shift Adjustment

Display Lens shift on the screen. Use the Point ▲▼◄► buttons to position the screen to the desired point without having picture distortion.

The screen can be moved up or down to 60 percent, or sideways up to 10 percent from the central axis of the lens shift.

Press and hold the LENS button for more than 5 seconds to return to the central position.

Note:

•The arrow disappears at the maximum lens shift in each direction.

•The arrows turn red when the lens shift comes to the center position of the screen.

Shutter Function

Shutter function allows you to completely block out light to the screen. Press the SHUTTER button to close the shutter inside the projector. To open up the shutter, press the SHUTTER button again. Refer to p.63 for details of setting for the Shutter function.

Note:

•The SHUTTER button on the side control and the remote control cannot be effective when Shutter Protection is On in the Setting menu. (p.63)

•The SHUTTER indicator on the projector's top lights blue when the shutter is closed. (pp.12, 79)

•The projector will shut down automatically when the set time on shutter management has passed. (p.63)

•The Power management function does not work when the shutter is closed. (p.59)

LENS button

SHUTTER button POINT buttons

Zoom

Focus

	
	Lens shift	
	

27

Basic Operation

Sound Adjustment

Direct Operation

Volume

Press the VOLUME+/– buttons on the side control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds.

Mute

Press the MUTE (Point ▼) button on the remote control to select On to temporarily turn off the sound. To turn the sound back on, press the MUTE (Point

▼) button again to select Off or press the VOLUME +/– buttons.

Menu Operation

1Press the MENU button to display the On-Screen

Menu. Use the Point ▲▼ buttons to select Sound. Press the Point ► or the SELECT button to access the submenu items.

2Use the Point ▲▼ buttons to select the desired submenu item and press the SELECT button to access the selected item.

Volume

Press the Point ► button to turn up the volume; press the Point ◄ button to turn down the volume.

Built-in SP

Press the Point ▲▼ buttons to switch the Built-in

SP function On/Off. When the Built-in SP sound is turned off, Off is displayed.

Mute

Press the SELECT button to switch the mute function On/Off. When the sound is turned off, On is displayed. Press the VOLUME +/– buttons again to turn the sound back on.

Note:

Sound function can not be operated via the remote control or the Screen Menu, when Network is selected in Input Menu.

Side Control

VOLUME +/– buttons

Remote Control

VOLUME – button

VOLUME + button

MUTE (Point ▼) button

Volume Dialog Box

Approximate level of the volume.

Press the Point ▼ button to set the Mute function On or Off. The dialog box disappears after 4 seconds.

Sound Menu

28