Sanyo TS3632, KS3032, KS2432, XS3632, XS4232 User Manual 2

...
0 (0)

INSTRUCTION MANUAL

Split System Air Conditioner

COOL/FAN Model

Wall-mounted type

Ceiling-mounted type

Recessed type

 

 

 

KS2432

TS2432

XS1822, XS1852

KS3032

TS3632

XS2432

KS3632

TS4232

XS3632

 

 

XS4232

 

 

 

Save These Instructions!

Pub. OI-85464189201002

©SANYO 2000

 

 

Features

These air conditioners are equipped with cooling function. Details on this function are provided below; refer to these descriptions when using the air conditioner.

· Microprocessor Controlled Operation

· Air Sweep Control

The interior compartment of the remote control

This function moves a flap up and down in the

unit contains several features to facilitate

air outlet, directing air in a sweeping motion

automatic operation, easy logically displayed for

around the room and providing comfort in every

easy use.

corner.

·

·

·

·

Simple One-touch Wireless Remote Control

The remote control unit has several features to facilitate automatic operation.

24-hour clock with ON/OFF Program Timer

The wireless remote controller allows you to set up a wide variety of time based operations. Such functions include automatic on/off with time settings, same time on/off every day, on timer and off timer.

1-Hour OFF Timer

This timer can be set to automatically turn off the unit at any time after one hour.

Night Setback

Pressing this button changes the setting of the room temperature thermostat, allowing you to set the temperature at whatever level that you find comfortable.

·Automatic Restart Function for Power Failure

Even when power failure occurs, preset programmed operation can be reactivated once power resumes.

·Anti-Mold Filter

This unit is equipped with an anti-mold filter that inhibits the growth of mold and bacteria.

· Automatic and 3-step Fan Speed

Auto/High/Medium/Low

2

OI-201-02EG

Contents

 

 

Page

Features..................................................................................................................

2

Product Information ..............................................................................................

3

Alert Symbols ........................................................................................................

3

Installation Location..............................................................................................

4

Electrical Requirements ........................................................................................

4

Safety Instructions ................................................................................................

4

Names of Parts ......................................................................................................

5

Using the Remote Control Unit .........................................................................

11

Operation with the Remote Control Unit..........................................................

13

1. Operation ...............................................................................................

13

2. Adjusting the Fan Speed......................................................................

14

3. Fan Only.................................................................................................

14

4. Night Setback Mode ............................................................................

15

Special Remarks .................................................................................................

16

Setting the Timer ................................................................................................

17

Using the 1-Hour OFF Timer..............................................................................

19

Adjusting the Airflow Direction .........................................................................

20

Operation without the Remote Control Unit ....................................................

20

Care and Cleaning...............................................................................................

21

Troubleshooting...................................................................................................

23

Tips for Energy Saving.......................................................................................

23

Operating Range .................................................................................................

23

Product Information

If you have problems or questions concerning your Air Conditioner, you will need the following information. Model and serial numbers are on the nameplate on the bottom of the cabinet.

Model No.

 

Serial No.

Date of purchase

Dealer's address

Phone number

Alert Symbols

The following symbols used in this manual, alert you to potentially dangerous conditions to users, service personnel or the appliance:

This symbol refers to a hazard or unsafe practice which can result in severe personal injury or death.

CAUTION

This symbol refers to a hazard or unsafe

practice which can result in personal injury

 

 

or product or property damage.

OI-201-03EG

3

Installation Location

·We recommend that this air conditioner be installed properly by qualified installation technicians in accordance with the Installation Instructions provided with the unit.

·Before installation, check that the voltage of the electric supply in your home or office is the same as the voltage shown on the nameplate.

· Do not install this air conditioner where there are fumes or flammable gases, or in an extremely humid space such as a greenhouse.

·Do not install the air conditioner where excessively high heatgenerating objects are placed.

Avoid:

·

To protect the air conditioner from heavy corrosion, avoid installing the

 

 

outdoor unit where salty sea water can splash directly onto it or in

 

 

sulphurous air near a spa.

 

·

The unit may malfunction when the receiver in the indoor unit is

 

 

exposed to the inverter lamp light.

Electrical Requirements

1.All wiring must conform to the local electrical codes. Consult your dealer or a qualified electrician for details.

2.Each unit must be properly grounded with a ground (or earth) wire or through the supply wiring.

3.Wiring must be done by a qualified electrician.

·Power supply: 60 Hz, single-phase, 230/208 volts.

 

 

To warm up the system, the power mains

Power mains

CAUTION

 

 

 

 

 

must be turned on at least five (5) hours

ON

 

 

 

before operation. Leave the power mains

 

 

ON unless you will not be using this

 

 

 

appliance for an extended period.

 

 

 

(CL MODEL)

 

 

 

 

 

Safety Instructions

·Read this Instruction Manual carefully before using this air conditioner. If you still have any difficulties or problems, consult your dealer for help.

·This air conditioner is designed to give you comfortable room conditions. Use this only for its intended purpose as described in this Instruction Manual.

· Never touch the unit with wet hands.

·Never use or store gasoline or other flammable vapor or liquid near the air conditioner Ð it is very dangerous.

·This air conditioner has no ventilator for intaking fresh air from outdoors. You must open doors or windows frequently when you use gas or oil heating appliances in the same room, which consume a lot of oxygen from the air. Otherwise there is a risk of suffocation in an extreme case.

CAUTION · Do not turn the air conditioner on and off from the power mains switch. Use the ON/OFF operation button.

·Do not stick anything into the air outlet of the outdoor unit. This is dangerous because the fan is rotating at high speed.

·Do not let children play with the air conditioner.

·Do not cool the room too much if babies or invalids are present.

4

OI-201-04EG

Names of Parts

Each air conditioner as shown below consists of an indoor unit and an outdoor unit. You can control the air conditioner with the remote control unit.

Ceiling mounted type

Recessed type

Air outlet

 

Air

 

 

 

intake

 

 

 

 

Air outlet

Air intake

 

Drain tube

 

Drain tube

 

 

 

Remote

Refrigerant

 

 

control

tubes

Remote control

Refrigerant

unit

 

unit

tubes

Wall mounted type

Air intake

 

 

Refrigerant

 

 

tubes

 

Air outlet

 

 

Remote control unit

Drain

 

 

hose

NOTE

This illustration is based on the external view of a standard model.

 

Consequently, the shape may differ from that of the air conditioner which

 

you have selected.

 

Air intake The return air in the room is drawn into this section and passes through air filters which remove dust and foreign particles.

Air outlet Conditioned air is returned to the room through the air outlet (ceiling and wall mounted type) or four air outlets (Recessed type).

The direction of airflow can be adjusted as desired using the remote control unit.

Remote control unit The wireless remote control unit controls power ON/OFF, operation mode selection, temperature, fan speed, timer setting, and air sweeping.

Refrigerant tubes The indoor and outdoor units are connected by copper tubes through which refrigerant gas flows.

Drain tube Moisture in the room is condensed and drains off by means of this tube.

Outdoor (condensing) unit The outdoor unit contains the compressor, fan motor, heat exchanger coil, and other electrical components.

OI-201-05EG

5

Sanyo TS3632, KS3032, KS2432, XS3632, XS4232 User Manual 2

Unit Display and Operation Selector

Recessed type

Ceiling mounted type

 

 

 

 

control

OPERATION

TIMER

Remote

lamp

lamp

receiver

Recessed type

Ceiling mounted type

Operation selector

Finger-hold

Air intake grille

Air intake grille

Air filter

Operation selector

6

OI-201-06EG

Unit Display and Operation Selector (continued)

INDOOR UNIT

REMOTE CONTROL receiver

OPERATION lamp

Operation selector

TIMER lamp

 

REMOTE CONTROL

control unit

 

receiver

(transmitter).

 

 

 

 

Operation selector

 

 

ON position

This position is for operating the air conditioner with the wireless

 

 

remote control unit.

 

 

Set the selector normally in this position.

 

 

 

 

OFF position

Switch the selector to the OFF position if you are not going to use

 

 

the air conditioner for a few days or longer.

 

 

The OFF position does not disconnect the power. Use the main

 

 

power switch to turn off power completely.

TEST position This position is used only when servicing the air conditioner.

CAUTION

Do not set at the TEST position for normal operation.

 

OPERATION lamp This lights when the system is in the continuous COOL or FAN mode.

TIMER lamp This lamp lights when the system is being controlled by the timer.

OI-201-07EG

7

Remote Control Unit (Display)

Displayed when main unit sensor is in use

Displayed when setting temperature

1HR.

SET TEMP

F

ON OFF

AM

PM

Displayed when transmitting data

Displayed when temperature is shown

Displayed when the temperature setting is at the upper or lower allowable limit

Displayed when setting timer

Symbols

(1)Operation mode

COOL .......................................

FAN ..........................................

(2)Fan speed

Automatic operation ..............

HIGH ........................................

MEDIUM..................................

LOW.........................................

(3) Set temperature

 

60 ± 88 °F

F

When set to 82 °F ...........

Current temperature

 

indication .........................

 

(4) Timer

24-hour clock with ON/OFF

 

Program Timer .......................

 

24-hour ON Timer..................

ON

 

24-hour OFF Timer

OFF

 

1-hour OFF Timer...................

1HR.

 

(5) NIGHT SETBACK ....................

 

(6) Confirmation of

 

transmission ...........................

 

(7) Sweep indication....................

8

OI-201-08EG

Loading...
+ 16 hidden pages