Fully Digital
Answering
System
DAS 202
INSTRUCTION MANUAL
Please read this operation manual before using your new answering machine and keep it for further reference
1
QUICK INSTRUCTIONS
•Setting the Time
–Press and hold ‘STOP/TIME’ to enter the SET CLOCK mode
–Press the FF c Key or the REPT d Key to adjust the day
–Press ‘STOP/TIME’ again to set the day
–Repeat to set Hours and Minutes
•Playing the Current Time
–Press ‘STOP/TlME’
•Recording the Outgoing Message (OGM)
–Press and hold ‘OGM1’
–Speak clearly into the microphone with your message
–Press ‘STOP/TIME’ to stop recording
–Repeat the process for ‘OGM2’
•Recording a Memo
–Press and hold ‘MEMO/2WAY’ for 2 seconds
–Speak clearly into the microphone with your message
–Press ‘STOP/TIME’ to stop recording
•2 Way Recording
–Press and hold ‘MEMO/2WAY’ for 4 seconds
–Have a normal conversation on your telephone
–Press ‘STOP/TIME’ to stop recording
•Playing a Memo
–Press ‘MEMO/2WAY’ or ‘PLAY’
•Setting to Answer/Record Mode or Answer Only Mode
–If the system is in Answer Only Mode, press and hold ‘ANSWER’ for about 2 seconds.
–The DAS 202 will beep and OGM1 will play.
–Repeat the process to return the system to ANSWER ONLY MODE.
–The DAS 202 will beep and OGM2 will play
•To turn on/off the answering system, press ‘ANSWER’
•Playing Messages
1. |
Playback |
Press ‘PLAY’ |
2. |
Pause Message |
Press ‘PLAY’ |
3. |
Resume Playback from Pause |
Press ‘PLAY’ |
2 |
3 |
4. |
Repeat Message |
Press ‘REPT d’ once to replay |
|
|
current message, twice to replay |
|
|
the previous message |
5. |
Skip Message |
Press ‘FF c’ once to skip the |
|
|
current message, multiple times to |
|
|
skip through more than one message |
6. |
Erase Single Message |
Press ‘ERASE’ while message |
|
|
is playing |
7. |
Stop Playback |
Press ‘STOP/TIME’ |
8. |
Erase and Save ALL Messages |
Press and Hold ‘ERASE’ to erase |
ALL
Messages. To restore or save all messages, press and hold ‘ERASE’ again
•40-Minute Total Recording Time
–The DAS 202 has 40-minute memory capacity in total to record your outgoing messages, incoming message, memos and 2-way conversation.
•Security Code Remote Control
–Refer to “Remote Control Functions Table” on Page 12/13.
LOCATION AND FUNCTION OF CONTROLS
13
|
|
|
|
|
REPT |
|
14 |
16 |
MEMO/2WAY |
|
TIME |
FF |
|
OGM1 |
|
PLAY |
|
|||
|
STOP |
ERASE |
||||
|
15 |
|
OGM2 |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
1 |
2 |
4 |
6 |
8 |
10 |
|
3 |
|
5 |
7 |
9 |
ANSWER
12
11
1.Message LED Indicator – Indicates the DAS 202 Answering Machine’s current status.
•‘A1’ or ‘A2’ flashes four times on the display to indicate that there is no outgoing message (greeting) recorded.
•‘CL’ flashes once on the display to indicate that the time is not set
•A ‘Number’ displayed before playing your messages back indicates the total number of messages currently in the DAS-202’s Memory.
•A ‘Number’ displayed while playing your messages back indicates the sequential number of the message currently being played.
2.MEMO/2WAY Key – Allows you to leave messages for other family members when you leave the house. Also allows you to record both sides of a
conversation you are having on the telephone.
3/4.OGM1/OGM2 Keys –The DAS 202 allows you to record two outgoing messages. OGM1 is a conventional message, and OGM2 is an “answer only” message. The DAS 202 will automatically switch to the OGM2 message if your memory is full and the unit is unable to take a message.
5.ANSWER LED Indicator – Lights up when the DAS 202 is ready to answer calls, and flashes when you have messages.
6.STOP/TIME Key – Stops current operation, plus allows you to either set the time or hear the current time.
7.PLAY Key – Press to play recorded messages.
8.REPT d Key – Repeats the current or previously played message.
4 |
5 |