Sanyo CLT-D6220, CLT-D6223, CLT-D6222 User Manual

0 (0)

INSTRUCTION MANUAL

CLT -D6220

 

 

Dual Handset Model

 

CLT -D6222

 

Triple Handset Model

Digital Enhanced Cordless CLT -D6223

Telephone 6.0

 

VOL

 

 

CID

 

 

 

 

 

 

 

 

VOL

 

 

CID

FLASH

MENU

MUTE

 

 

 

 

BACK

OK

 

CLEAR

 

 

 

 

1

ABC

2

DEF 3

 

 

 

 

GHI 4

JKL

5

MNO 6

FLASH

MENU

MUTE

BACK

OK

 

CLEAR

PQRS 7

TUV

8

WXYZ 9

1

ABC

2

DEF 3

TONE

 

0

 

GHI 4

JKL

5

MNO 6

PQRS 7 TUV 8 WXYZ 9

PAGE

INT

R

FORMAT

PAUSE

TONE

0

 

 

INT

R

 

 

 

 

 

FORMAT

PAUSE

(This picture depicts dual handset model CLT-D6222)

IMPORTANT!

Charge the handset battery for a full 15 hours before using your telephone for the first time.

SANYO Canada Inc.

SANYO Canada Inc.

66DD121BHBAG

www.sanyo.ca

 

 

www.sanyo.ca

 

 

 

 

 

 

 

 

 

 

TABLE OF CONTENTS

INTRODUCTION

3

SAFETY INSTRUCTIONS

3

UNPACKING

5

TIPS FOR BEST PERFORMANCE

6

NAMES OF CONTROLS

7

Handset

7

LCD display

7

Base station

8

External charger

8

INITIAL SETUP

9

AC connection

9

Wall mount

9

Installing the handset battery and

10

initial charging

Replace the handset battery

11

BASIC OPERATION

12

Register

12

Dial mode

12

Set time

13

Placing a call

13

Answering a call

14

Out of range

14

MENU CHART

14

FEATURES

16

Phonebook

16

Character chart

17

Chain dialing

17

Ringer mute

17

Redial

18

Temporary touch tone access

18

Quick access for missed call

18

Flash

18

Handsfree speaker

19

Headset

19

Mute

19

Keylock

19

To adjust the volume

19

Page/Handset locator

19

Intercom/Call transfer

20

3-Way conference

21

Caller ID features

21

Voice mail indicator

21

 

22

SETTINGS MENU

22

New entry

22

PHONEBOOKEdit record

22

Delete record

23

Delete All

23

Music Group

23

Speed dial

24

Memory Status

24

SETUP

25

Unit name

25

Backlight time

25

Area code

25

Dial mode

25

Auto talk

26

Flash time

26

Language

26

Contrast

27

Register

27

New register

27

De-register

27

Select base

28

Time format

28

Set time

29

Set default

29

PROFILE

29

HS ringer music

29

HS ringer volume

30

Page tone

30

Key tone

30

FUNCTION

31

No disturb

31

Alarm 1, Alarm 2

31

Call log

32

Call log options

32

Store record

32

Delete record

33

Delete all

33

 

34

 

34

MAXIMIZE BATTERY PERFORMANCE

35

REPLACE THE BATTERY

35

RECYCLING NICKEL-METAL

35

HYDRIDE BATTERIES

36

POWER FAILURE

37

HEADSET JACK

38

DEFAULT SETTING

39

TROUBLE SHOOTING

41

MAINTENANCE

42

TECHNICAL INFORMATION SANYO COMFORT WARRANTY SOS HELP LINE

2

INTRODUCTION

Thank you for choosing SANYO. Your SANYO DECT 6.0 telephone features include:

Handset speakerphone

Multilingual menu: English, French, Spanish Caller ID

Voicemail indicator 100-name/number phone book 50-caller log

Polyphonic ringers

Listening and ringer volume control Lighted keypad

Speed dialing Page/handset locator Headset jack on handset

3 parties conference call (CLT-D6222, CLT-D6223 multi handsets) Clock & 2 wake-up alarms

Intercom and call transfer between handsets (CLT-D6222, CLT-D6223 multi handsets)

IMPORTANT SAFETY INSTRUCTIONS

Some of the following information may not apply to your particular product; however, when using telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1.Read and understand all instructions.

2.Follow all warnings and instructions marked on the product.

3.Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4.Telephones should not be used while you are in a bathtub, shower or pool. Immersion of the telephone or handset in water could cause an electrical shock.

5.Slots and openings in the cabinet back or bottom are provided for ventilation, to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation unless proper ventilation is provided.

6.This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

7.Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by people walking on it.

8.Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.

9.Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

10.To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified serviceman when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the telephone equipment is subsequently used.

11.Do not expose the product to extreme temperatures such as areas near a hot radiator or stove or in a hot car.

12.Do not place light candles, cigarettes, cigars, etc., on the telephone.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

13.Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

14.Never install or modify telephone wiring during a lightning storm.

15.Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

16.Use caution when installing or modifying telephone lines to prevent electrical shock and/or fire.

17.Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power supply cord or plug is damaged or frayed.

B.If the product has been exposed to water.

C.If the product does not operate normally by following the operating instructions.

D.If the product’s cabinet has been damaged.

E.If the product exhibits a distinct change in performance.

18.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

19.Do not use the telephone to report a gas leak in the vicinity of the leak.

20.Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product.

CAUTION

You must use a Class 2 power source that supplies 7.5V DC and delivers at least 250mA. Its plug must fit the phone’s DC IN jack. The supplied adaptor meets these specifications. Using an adaptor that does not meet these specifications could damage the phone or the adaptor.

Always connect the AC adaptor to the phone before you connect it to AC power. When you finish, disconnect the adaptor from AC power before you disconnect from the phone.

SAFETY INSTRUCTIONS FOR BATTERIES

1.CAUTION: Risk of explosion if battery is replaced by an incorrect type. Use only the provided battery pack in the handset of your cordless phone: 2.4V 600mAH NiMH rechargeable battery pack

2.Do not dispose of the battery(ies) in a fire. They may explode. Check with local codes for possible special disposal instructions.

3.Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin and it may be toxic if swallowed.

4.Exercise care in handling battery(ies) in order not to short out the battery(ies) with conducting materials such as rings, bracelets, and keys. The battery(ies) or conductor may overheat and cause burns.

5.Do not attempt to rejuvenate the battery(ies) provided with or identified for use with this product by heating them. Sudden release of the battery(ies) electrolyte may occur causing burns or irritation to eyes or skin.

6.When inserting battery pack into this product,the proper polarity or direction must be observed. Remove battery(ies) from this product if storing over 30 days because the battery(ies) could leak and damage the product.

7.If your product uses rechargeable battery(ies), charge the battery(ies) only in accordance with the instructions and limitation specified in the User Manual.

SAVE THESE INSTRUCTIONS

3

4

 

 

 

 

 

 

 

 

UNPACKING

Check to make sure you have all the items that come with the system.

Base Station

Handset

Telephone Cord

(1 pc for CLT-D6220 2 pcs for CLT-D6222 3 pcs for CLT-D6223)

Rechargeable

Battery Pack 2SN-AAA60H-S-T (Pre-installed)

(1 pc for CLT-D6220 2 pcs for CLT-D6222 3 pcs for CLT-D6223)

VOL CID

AC Adaptor

External Charger

1 pc for base 250mA

(1 pc for CLT-D6222

1 pc for charger 150mA (CLT-D6222)

2 pcs for CLT-D6223)

2 pcs for charger 150mA (CLT-D6223)

 

INPUT: AC120V, 60Hz OUTPUT: DC 7.5V, 250mA Polarity: Center Negative (for base station)

INPUT: AC120V, 60Hz OUTPUT: DC 7.5V, 150mA Polarity: Center Negative (for external charger)

TIPS FOR BEST PERFORMANCE

Base station location

For the maximum operating range, the best location for the base station is at the highest point in the house. Avoid places near electrical appliances and metal structures such as refrigerator and filing cabinets that can reduce operating range and performance.

Away from electrical appliances such

In a HIGH and CENTRAL location

as TV, radio, or personal computer.

with no obstructions.

Do not place the base station on top of or near TV or VCR as this may interfere with the performance of these appliances.

CAUTIONS:

If you operate this product near water (bathtub, swimming pool, kitchen), take care to avoid contact between the water and the handset.

Never spill liquid on the handset. This may cause a malfunction.

Do not operate this product with dirty hands or allow the handset to be exposed to direct sunlight for extended periods. This can cause blurring, discoloration and fading of the lettering on the handset keypad. Discoloration or fading will have no effect on the telephone performance.

Connect the AC adaptor to a wall outlet that receives power continuously. Do not connect it to a switched outlet.

5

6

 

 

 

 

 

 

 

 

Sanyo CLT-D6220, CLT-D6223, CLT-D6222 User Manual

NAMES OF CONTROLS

Handset

Incoming Ring/

In use LED

TALK Button

Press to answer an incoming call or to place an outgoing call.

MENU/OK Button Press to enter the menu

in standby mode. Also use

to confirm the selection in the menu.

Headset Jack

FLASH/BACK Button

Works like a temporary hook switch. Use to access

special telephone company services (call waiting, for example) Press in menu mode will go

back one step.

TONE/ / Button

Press for temporary access to Touch-Tone dialing. Press and hold will turn ON and OFF No disturb mode.

INTERCOM/FORMAT Button Press to page or intercom another handset registered to the same base unit.

Press to format area code/ Long distance numbers when reviewing Caller ID numbers.

PHONEBOOK Button Press to access

phonebook. Microphone

VOL

 

 

CID

 

FLASH

MENU

MUTE

BACK

OK

 

CLEAR

1

ABC

2

DEF

3

GHI 4

JKL

5

MNO

6

PQRS 7

TUV

8

WXYZ 9

TONE

 

0

 

 

INT

 

 

R

 

 

 

 

 

FORMAT

 

PAUSE

 

Earpiece

Display

UP/DOWN Button

Use to scroll up () or down ( ) in the menu. Or adjust the volume level of the earpiece during a call. Press Up () or Down ( ) in standby mode to check for missed calls.

END Button

Press to disconnect a call or exit from menu.

MUTE/CLEAR Button

Use to mute the microphone during a call. Also use for clear an input.

Dial Buttons

#/KEYLOCK Button

Press and hold will activate or deactivate keylock

HANDSFREE SPEAKER Button Press to activate the speakerphone.

REDIAL (PAUSE) Button Press to display the dialed number. Also use to insert

a pause between dialing digits.

Contact Points

For handset battery charging.

LCD display

Speaker, In Use,

Date

Ringer Off, Alarm Time

In Range Signal

 

Battery

 

NAMES OF CONTROLS (Continued)

Base station

Contact Points

For handset battery charging.

CHARGE /IN USE

PAGE

7.5

CHARGE/IN USE

Indicator

Lights when the handset battery is being recharged or when the telephone

is in use.

Flashes when there is an incoming call.

PAGE Button Press to page the handset.

AC Adaptor Jack

Modular Telephone Jack

(DC 7.5V AC Adaptor)

(TEL LINE)

External charger

(For CLT-D6222, CLT-D6223)

CHARGE Indicator

7.5

AC Adaptor Jack

(DC 7.5V AC Adaptor)

7

8

 

 

 

 

 

 

 

 

INITIAL SETUP

AC connection

1.Insert the small plug on the end of the AC adaptor cord into the DC 7.5V AC ADAPTOR jack on the back of the base station.

2.Plug the AC adaptor into a standard AC120V wall outlet.

3.Plug one end of the telephone cord into a telephone wall jack and the other into the TEL LINE jack on the back of the base station.

Wall Telephone Jack

AC Wall Outlet

7.5

AC Adaptor

To Telephone Line

7.5

(For CLT-D6222, CLT-D6223)

NOTE:

Use only AC adaptor provided with the telephone.

Wall mount

To mount the base station on a wall

1.Connect the cord to a wall phone plate (not supplied).

2.Mount the base station on the wall phone plate securely.

WARNING:

Be certain there are no electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting the screws into the wall.

INITIAL SETUP (Continued)

Installing the handset battery and initial charging

1.The battery pack is already pre-installed in the handset. Find the battery contact tab on the back of the handset.

2. Pull the battery contact tab out slowly from the battery compartment.

3. Place the handset on the base station for 15 hours.

CHARGE

The /IN USE indicator in base will light.

The base station must be connected to AC power.

NOTE:

Battery and handset may become warm during charging. This is normal.

Pull to remove before use

Retirer avant usage

Pull to remove before use

Retirer avant usage

IMPORTANT: Charge the handset battery for a full 15 hours before using the telephone for the first time.

If the handset battery is not installed and the handset is placed on the base station cradle, the incoming ring will not sound.

Replacement battery:

Nickel Metal Hydride 2.4V 600mAh battery pack.

Using other types of batteries may cause serious damage or equipment malfunctions. Only replace with an approved battery pack available through SANYO.

Use enclosed form to order.

CAUTION:

Use only the specified battery.

Do not remove the battery from the handset to charge.

Never throw the battery into a fire, disassemble it, or heat it.

Do not remove or damage the battery casing.

Remove the battery if would not use the phone for over 30 days.

Low battery

If the handset battery power is low the BATTERY ICON in the display will be empty and you will hear a warning beep every 15 seconds. If you are on a call, finish your conversation as soon as possible as your call will be cut in approximately 5 minutes. Recharge the handset for 15 hours before continuing to use the telephone.

9

10

 

 

 

 

 

 

 

 

INITIAL SETUP (Continued)

Replace the handset battery

1. Remove the battery compartment lid.

2. Detach the old battery from the battery compartment by using the ribbon linked to the battery.

Battery ribbon

3. Place the new battery into the compartment.

 

Follow the direction and make sure the contacts

 

of the battery touch the contacts of the

 

compartment.

Battery

 

contacts

4.

Replace the lid.

5.

Place the handset on the base station for 15 hours.

 

CHARGE

 

The /IN USE indicator in base will light.

BASIC OPERATION

Before using the phone

Register

Your handset has been registered to the base at the factory. Please verify the link is still valid before use.

1.Place the handset close to the base station. The antenna icon in the display should appear.

2.Press . Verify that you get a dial tone and the IN USE indicator lights. The display will show "IN USE" and a call timer.

Your handset is ready to use.

3.Place a call or press to hang up.

If your handset does not register to the base, please see page 36 TROUBLE SHOOTING for help and/ or try the following procedures to register the handset:

Lift the handset from the base charging cradle. Press and hold the PAGE button in the base for 10

CHARGE

seconds until the /IN USE LED flashes. Please complete the registration within 1 minute.

Press

To

MENU

enter MENU

 

 

scroll to SETUP

MENU

enter SETUP

 

scroll to REGISTER

MENU

enter REGISTER

MENU

enter NEW REGISTER

MENU

select BASE 1 for the first base unit

input PIN code, default is 1234

key 0-9

confirm

MENU

 

Your handset is now searching for the base. If successful you will hear a long beep confirmation tone. If not successful, you will hear a 3 beep error tone. Please try again.

Dial mode

Depending on the telephone system, you may need to set the dial mode TONE or PULSE to match. Default is TONE. If you are not sure the dialing system, contact your local telephone company.

Press To

MENU

enter MENU

scroll to SETUP

MENU

enter SETUP

scroll to DIAL MODE

MENU

enter DIAL MODE

select TONE or PULSE

confirm

MENU

exit

NOTE: For CLT-D6222 and CLT-D6223 multi-handsets, you must set the dial mode for each handset.

11

12

 

 

 

 

 

 

 

 

Loading...
+ 15 hidden pages