CDP-244
CDP-244CRB
Instruction Manual
Personal CD Player
CD MOBILE
OP |
EN |
SANYO Canada Inc.
www.sanyocanada.com
SAFETY TIPS
Thank you for purchasing the SANYO CDP-244/CDP-244CRB.
The CDP-244 comes with headphones and an AC adapter.
The CDP-244CRB comes with headphones, an AC adapter, car cassette adapter and cigarette lighter adapter.
CAUTIONS FOR SAFETY
Do not take the unit apart. The laser beam used in the unit could harm your eyes.
Do not insert pins or other objects inside the unit. This unit is equipped with a safety device which automatically turns the laser beam off when the disc compartment is opened. If a pin or other metal object should get inside the unit, however, this safety device may be deactivated.
Do not drop the unit or subject it to strong shocks. Doing so could result in damage.
Do not place the unit in the following locations:
Locations where the temperature is high. The cabinet may warp or the unit may otherwise be damaged if it is placed in direct sunlight, near heaters (where the temperature is 140 F/60 C or greater) or in cars with the windows closed. (In the summer, the temperature may get as high as 212 F/110 C or more.) Use the unit within a temperature range of 41 F/5 C to 95 F/35 C.
In humid or dusty locations.
In locations exposed to heavy vibrations.
On unstable or tilted surfaces.
1
CONDENSATION
If cold water is poured into a glass, water droplets form on the outside of the glass. This is called condensation. Condensation may occur on internal operating parts of the laser pickup.
CONDENSATION OCCURS:
When the unit is brought from the outdoors into a warm room, or if it is in a cold room which is heated quickly.
In the summer, if the unit is moved suddenly from an air-conditioned room or car to a hot or humid location.
SHOULD CONDENSATION OCCUR:
The unit may not operate properly if condensation occurs. Wait for 1 to 2 hours (to allow the internal parts to adjust to the surrounding temperature) before using the unit.
SAFETY TIPS
LASER SAFETY
THIS SET EMPLOYS AN OPTICAL LASER BEAM SYSTEM IN THE CD MECHANISM, DESIGNED WITH BUILT-IN SAFEGUARDS. DO NOT ATTEMPT TO DISASSEMBLE. EXPOSURE TO THIS INVISIBLE LASER LIGHT BEAM MAY BE HARMFUL TO THE HUMAN EYE. THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS, ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM EXPOSURE. THIS COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. THE LASER MECHANISM IN THE SET CORRESPONDS TO THE STYLUS (NEEDLE) OF A RECORD PLAYER. ALTHOUGH THIS PRODUCT USES A LASER PICK-UP LENS, IT IS COMPLETELY SAFE WHEN OPERATED ACCORDING TO DIRECTIONS.
SAFETY INSTRUCTIONS
The lightning flash a n d a r r o w h e a d within the triangle is a warning sign alerting you of "dangerous voltage" inside the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P A R T S I N S I D E . R E F E R SERVICING TO QUALIFIED S E R V I C E P E R S O N N E L .
The exclamation point within the triangle is a warning sign alerting y o u o f i m p o r t a n t i n s t r u c t i o n s accompanying the product.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Do not apply oil or petroleum products or solvents to any part of this set.
CAUTION:
Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam.
CONTROLS
1. |
CD lid |
|
|
|
|
|
9. |
SEARCH (backward) |
button |
||
2. |
PLAY/PAUSE |
|
|
|
button |
10. |
PHONES jack |
|
|||
|
|
|
|||||||||
|
|
|
|||||||||
3. |
STOP |
|
button |
|
11. OPEN latch |
|
|||||
|
|
|
|||||||||
|
|
|
|||||||||
4. |
PROGRAM button |
|
12. |
VOLUME control |
|
||||||
5. |
ANTI-S (anti-skip) button |
13. |
LINE OUT jack |
|
|||||||
6. |
P-MODE (Program, Repeat, Intro scan, |
14. |
BATTERY compartment |
|
|||||||
|
Random play) |
button |
|
15. |
DC IN 4.5V jack |
|
|||||
7. |
Display screen |
|
|
|
|
|
16. |
BASS X BOOST (BassXpander) switch |
|||
8. |
SEARCH (forward) |
button |
|
|
|
||||||
8 7 |
6 |
5 |
4 |
3 |
|
|
|
||
9 |
|
|
|
2 |
|
|
|
1 |
|
|
|
|
|
16
OP |
EN |
13 |
|
|
12
11
10
14
15
2 |
3 |
POWER SUPPLY
Plug one end of the AC adapter into the DC 4.5V jack, then plug the other end into an AC wall outlet.
Precautions on using the AC Adapter.
Do not touch the AC adapter with wet hands. Doing so is dangerous, as this could result in an electrical shock.
If the AC adapter is connected when the batteries are installed, the power supply automatically switches to the AC power source and the batteries are disconnected.
ALKALINE BATTERY INSTALLATION
Insert two AA batteries (not supplied) into the battery compartment on the bottom of the unit. Be sure to observe the proper polarity (the"+" and" - " signs) as indicated inside the battery compartment.
NOTE ON ALKALINE BATTERIES
When replacing the alkaline batteries, use two new batteries of the same type. Do not mix a used battery with a new one or mix different types of batteries.
When inserting the batteries, mistakenly inserting even one with improper polarity will cause leakage.
Never charge, heat, disassemble, or throw batteries into a fire.
REMEMBER
If the symbol " 
" flashes in the display, your batteries are weak. Replace them or use the AC adapter or cigarette lighter adapter (CDP-244CRB only).
If the display is blank no numbers show when PLAY/PAUSE button 
is pushed, the batteries are dead. Replace them, or use AC adapter. (Also check if you inserted the batteries according to the + and - as
IMPORTANT NOTE:
Spent or discharged batteries must be recycled or disposed of properly in compliance with all applicable laws. For detailed information, contact your local solid waste authority.
4
CAR KIT ADAPTER (FOR CDP-244CR ONLY)
The supplied cigarette lighter adapter is designed for use with vehicles that have a 12V, negative ground electrical system.
Most vehicles have this type of electrical system, but if you are unsure about the system in your vehicle, contact the vehicle dealer.
CIGARETTE LIGHTER ADAPTER (FOR CDP-244CRB)
Plug one end of the cigarette lighter adapter into the [DC IN 4.5V], then plug the other end into the cigarette lighter jack.
DC IN 4.5V
Caution on the cigarette lighter adapter.
Use this unit only with the supplied cigarette lighter adapter. Use with other cigarette lighter adapters could damage the unit.
When the inside of the cigarette lighter jack is dirty with ashes or dust, the plug section may become hot due to poor contact. Be sure to clean the cigarette lighter jack before use.
After use, disconnect the cigarette lighter adapter plugs from both this unit and the cigarette lighter jack.
The cigarette lighter adapter may cause interference with reception from the car radio or another radio inside the vehicle. If this is the case, disconnect the cigarette lighter adapter from the cigarette lighter jack, or use the radio at a distance from the cigarette lighter adapter.
5
Loading...