Sanus Systems TV27, TV-VCR, TV20, TV32, TV13, TELEVISION TURNTABLES TV13 User Manual


Assembly Instructions for Television TurntablesTM TV13, TV20, TV27, TV32

Congratulations on your purchase! Sanus Systems Television TurntablesTM are functional, attractive, and inexpensive. They are fi nished with a black powder that is both durable and beautiful. Please check carefully to make sure there are no missing or defective parts. Never use defective parts. Improper assembly may cause damage or injury. If you do not understand these directions, or have any questions about this assembly please contact Sanus at 800.359.5520 or We can quickly assist you with installation questions and missing or damaged parts

Supplied Parts: (1) Television Turntable

Supplied Parts: (1) Self Adhesive Protective Feet (pad of 4)

Step 1:

Position the Turntable so the black nylon swivel is facing up. Locate the circles at the end of each spoke. Next, place a

Adhesive Foot inside each circle, as shown in Diagram 1


Diagram 1





Bottom of



NOTE: If you are going to use the optional TV-VCR Kit, Proceed to the instructions for those at the bottom of the

page, otherwise, proceed to Step 2.

Diagram 2

Top of Turntable

Step 2:

Flip the Turntable over and place it in the desired position on a shelf or cabinet so the Adhesive Feet are facing down and are in direct contact with the shelf or cabinet as shown in Diagram 2.


Assembly Instructions for Optional TV-VCR Kit




TV-VCR Kit will not work with the TV13 Turntable

TV Turntable (sold separate)




Contents: (1)




Contents: (2)

Support Pillars



Contents: (4)

Plastic Dowels



Contents: (4) Allen bolts




Contents: (1) Allen Wrench







Sanus Systems 2221 Highway 36 W. St. Paul, MN 55113 800.359.5520 7.6.04

+ 1 hidden pages