VMAA18
(6901-100016 <04>)
Thank you for choosing the Sanus VMAA18 wall mount. The Sanus VMAA18 wall mount is designed to support a monitor sized up to 50 in. (127cm) and weighing up to 59 kg (130 lbs).The mount is adjustable; it will tilt +5° to -15°, swivel to ±90°, and roll ±6.°
WARNING
This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children!
CAUTION
This product is designed for use in wood stud walls only! The wall must be capable of supporting up to five times the weight of the monitor and mount combined. If you have any doubts about the ability of the wall to support the monitor, contact Sanus Customer Service, or a qualified contractor.
CAUTION
Do not use this product for any purpose not explicitly specified by Sanus Systems. Improper installation or use may cause personal injury and/or property damage. If you do not understand these instructions, or if you have doubts about the safety of the installation, contact Sanus Customer Service. Sanus is not liable for injury or damage caused by incorrect installation or use.
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA
US Customer Service: 1-800-359-5520 • info@sanus.com • www.sanus.com ©2008 Milestone AV Technologies
3/16 in.
Supplied Parts and Hardware
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Sanus Customer Service. Never use damaged parts!
[01] x 1 |
[02] x 1 |
5/16 in. |
1/4-20 |
5/16-18 x 1 in. |
[06] x 4 |
[07] x 4 |
[08] x 2 |
M4 x 12mm |
M5 x 12mm |
M6 x 12mm |
M8 x 16mm |
[11] x 4 |
[12] x 4 |
[13] x 4 |
[14] x 4 |
M4 |
M5 |
M6 |
M8 |
|
|
||||
|
||||
|
||||
[17] x 4 |
[18] x 4 |
[19] x 4 |
[20] x 4 |
[21] x 4 |
M4 x 30mm |
M5 x 30mm |
M6 x 35mm |
[24] x 4 |
[25] x 4 |
[26] x 4 |
|
M6 / M8 |
1/4-20 x 2.0 in. |
M4 / M5 |
|
|
|
|
|
[28] x 8 |
[29] x 4 |
[30] x 4 |
[03] x 2 |
[05] x 4 |
[04] x 2
[09] x 10 |
[10] x 1 |
5/16 x 2.5 in. |
|
[15] x 4 |
[16] x 2 |
M4 / M5 |
M6 / M8 |
[22] x 4 |
[23] x 4 |
|
M8 x 40mm |
|
[27] x 4 |
7/32 in. |
3/16 in. |
[31] x 1 |
[32] x 1 |
6901-100016 <04>
1: Attach Brackets to Monitor
For Monitors with a Flat Back
[11], [12], |
4x |
|
[13], [14] |
||
|
[17], [18], [19], [20]
[28], [29]
[03]
For Monitors with a Curved Back or Obstruction
|
[11], [12], |
4x |
|
|
|
|
[13], [14] |
|
OPT [28] |
|
|
|
[17], [18], |
|
[22], [23] |
[19], [20] |
|
|
[28], [29] |
|
[03]
OPT |
Use washer [28] with M4 or M5 |
|
hardware only. |
||
|
6901-100016 <04>
Loading...