Santos 12-8, 12-12 User And Maintenance Manual

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 1 / 16 www.santos.fr

USER AND MAINTENANCE MANUAL

IMPORTANT: documents included in this manual to be kept:

• "CE" COMPLIANCE DECLARATION

• WARRANTY CERTIFICATE

Coffee grinders - Fruit juicers - Mixers - Blenders - Drinks dispensers - Planetary mixers
Cheese graters - Ice crushers - Mincers - Vegetable slicers - Dough mixer
Moulins à café - Presse-fruits - Mixers - Blenders - Distributeurs de boissons - Batteurs
mélangeurs - Pétrin - Râpes à fromage - Broyeurs à glaçons - Hache-viande - Coupe-légumes

MODELES DEPOSES FRANCE ET INTERNATIONAL

INTERNATIONALLY PATENTED MODELS

SANTOS SAS :

140-150 AVENUE ROGER SALENGRO
69120 VAULX-EN-VELIN (LYON) - FRANCE
PHONE [phone] ­FAX [phone]
E-Mail :[e-mail] www.santos.fr

MEAT MINCER N°12-8 and N°12-12

!

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 2 / 16 www.santos.fr

SOMMAIRE

“CE” COMPLIANCE DECLARATION ....................................................................................................................... 3

IMPORTANT SAFEGUARDS ....................................................................................................................................... 4

IMPROPER USE ........................................................................................................................................................... 4

ELECTRICAL CONNECTION: ................................................................................................................................... 4

PREPARING THE APPLIANCE FOR USE FOR THE 1ST TIME (FIG. A ). ................................................................ 5

RECYCLING THE PRODUCT AT THE END OF ITS SERVICE LIFE ...................................................................... 5

DESCRIPTION OF THE APPLIANCE ........................................................................................................................ 6

USING THE MACHINE

................................................................................................................................................... 7

USING FOR THE 1ST TIME: ........................................................................................................................................ 7

Preparation and use: ................................................................................................................................................ 7

STOPPING THE APPLIANCE: ............................................................................................................................................. 7

DISMANTLING AFTER USE: .............................................................................................................................................. 8

CLEANING ................................................................................................................................................................... 8

MAINTENANCE .......................................................................................................................................................... 8

Spare parts: ............................................................................................................................................................... 8

FAULT FINDING ............................................................................................................................................................ 9

MACHINE TECHNICAL SPECIFICATIONS

.............................................................................................................. 10

WIRING DIAGRAMS ................................................................................................................................................... 11

WIRING DIAGRAM 220-240V 50/60HZ ......................................................................................................................... 11

WIRING DIAGRAM 100-120V 50/60HZ ......................................................................................................................... 12

FIGURES..................................................................................................................................................................... 13

WARRANTY CERTIFICATE

................................................................................................................................... 16

APPLIANCE IDENTIFICATION PLATE

............................................................................................................... 16

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 3 / 16 www.santos.fr

“CE” COMPLIANCE DECLARATION

THE MANUFACTURER:

SANTOS SAS - 140-150, Av. Roger SALENGRO 69120 VAULX-EN-VELIN (LYON)

FRANCE

declares that the appliance intended for the professional market described below:

Description: MEAT MINCER
Type number: 12-8, 12-12

complies with:

• the statutory provisions defined in appendix 1 of the European "machines" directive
n°2006/42/CE and the national legislation transposing it

• the statutory provisions of the following European directives and regulations:

o N° 2006/95/CE (low voltage directive)
o N° 2004/108/CE (EMC directive)
o No. 2002/95/CE (RoHS directive)
o No. 2002/96/CE (WEEE directive)
o N° 1935/2004/CE (regulation) relating to materials and articles intended to

come into contact with foodstuffs

Harmonised European standards used to give presumption of conformity with the essential
requirements of the above-mentioned directives:

• NF EN 12331+A1: 2010, Machines for food products. Mincers. Safety and hygiene

regulations.

This European standard is a type-C standard as defined in EN ISO 12100. When the provisions of
this type-C standard differ from those stated in the type-A or B standards, the provisions of the type­C standard override the provisions of the other standards. This standard provides the means to
comply with the requirements of the "machines" directive n°2006/42/CE, (see appendix ZA)

• NF EN ISO 12100 -1 and 2:2004: Safety of machinery - General principles for
design

• NF EN 60204-1: 2006 : Safety of machinery - Electrical equipment of machines­General requirements

• NF EN 1672-2: 2005, Food processing machinery – Basic concepts – Hygiene
requirements

• NF EN 60335-1: 2013 : Household and similar electrical appliances. Safety.

• NF EN 60335-2-64 :2004 : Particular requirements for commercial electric kitchen

machines

Drawn up in VAULX-EN-VELIN on: 01/05/2014
Signatory’s position: CHIEF EXECUTIVE OFFICER
Signatory’s name: Aurélien FOUQUET

Signature:

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 4 / 16 www.santos.fr

IMPORTANT SAFEGUARDS

When using, cleaning or maintaining the machine, always follow these instructions:

Read all instructions

IMPROPER USE

1. Do not use this appliance for:

- grinding meat which is not boned.

- crushing bones or frozen meat.

2. Do not use discs with holes greater than or equal to 8mm.

3. The appliance must not be used with discs and blades other than those
recommended by SANTOS.

4. For electrocution risk protection reasons, never plunge the base (9) into
water or any other liquid.

5. Cleaning in a jet of water or a high pressure spray is prohibited.

6. The base must not be immersed in water.

7. Never use the appliance if the power cord is damaged. It must be replaced
by either a SANTOS approved dealer or a person with similar qualifications
to avoid any danger.

8. The appliance must be unplugged before any intervention on it: cleaning,
general care, maintenance.

9. It is forbidden to operate the appliance on a surface with a slope in excess of
10° with respect to the horizontal plane. The feet of the machine must
always be resting on this surface.

10. The use of spare parts other than certified original SANTOS parts is
prohibited

11. Never connect several appliances to the same power socket.

12. Never use the machine outdoors.

13. Never place the appliance close to or on a source of heat.

14. This appliance is a professional machine designed exclusively for
professional use. It is not designed for household use.

15. This appliance is not designed for use by people (including children) whose
physical, sensorial or mental capacities are impaired or by people with no
experience or knowledge, unless they have been supervised or given
training in the use of the appliance beforehand by a person responsible for
their safety.
Supervise children to ensure they do not play with the appliance.

Note: You will find it easier to understand the next few paragraphs if you refer to

the diagrams at the end of this manual.

!

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 5 / 16 www.santos.fr

ELECTRICAL CONNECTION:

• The appliance's power supply is available in two single-phase voltages:

- 110-120 V 50/60 Hz:

- 220-240 V 50/60 Hz:

Line protection: the appliance must be connected to a standard 2 pole + earth socket. The
set-up must be fitted with a differential circuit breaker and a 16A fuse. The earthing of the

appliance is compulsory.

TAKE CARE:

• Before connecting the machine, check that the mains electrical voltage is the same
as the voltage for your appliance. Its value is shown:

 either on the identification plate under the machine.
 or on the identification plate on the last page of this manual.

• If the power supply cable is damaged, it should be replaced by an approved
SANTOS dealer, SANTOS or a person with similar qualifications to avoid any
danger.

TAKE CARE: Check that the On / Off switch (14) is in the 0 "0-Off"

position before connecting the power cable plug to your

mains electric power socket.

PREPARING THE APPLIANCE FOR USE FOR THE 1st TIME (Fig. A ).

Carefully clean the parts in contact with the food (Fig. 2).

• The body of the mincer (1) and locking screw (2).

• The nut (6), disc (5), blade (4), and feed screw (3).

• Wash the parts with a standard washing up liquid or in the dishwasher.

RECYCLING THE PRODUCT AT THE END OF ITS SERVICE LIFE

This appliance has the recycling symbol marking relating to waste electrical
and electronic equipment. This means that this product must be processed
by a waste sorting system in accordance with Directive 2002/96/CE (WEEE)
– Professional Equipment section – so that it can be either recycled or
disassembled in order to reduce any impact on the environment.

For further information, please contact your dealer or SANTOS..

For the disposal or recycling of the appliance components, please refer to a specialist
company or contact SANTOS.

Electronic products which have not been out-sorted are potentially dangerous for the
environment.

The packaging material should be disposed of or recycled in accordance with regulations
in force.

!

!

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 6 / 16 www.santos.fr

DESCRIPTION OF THE APPLIANCE

• The N°12-8 and N°12-12 meat mincers are designed for kitchens, restaurants,
caterers and food preparers, butchers, delicatessens…

• They are made up of a motor unit with 8 mm stainless steel body and a « single
cutting » meat grinding assembly.

• The appliances are fully suitable for the preparation of : Meat and beefburgers,
country pâtés, sausage meat, ground fish, cake preparation….

12-8 meat mincer (Standard discs Ø 62mm)

The appliance is made up of a meat grinding assembly comprising one mincer body,
feed screw and nut for clamping the discs made of aluminium for contact with food.
It is supplied with:

- 3 stainless still discs, Ø 62 mm, drilled with the following holes: Ø 3, Ø 4.5
and Ø 8 mm.

- 1 stainless steel self-sharpening blade.
The following is available as an option: a set made up of three sausage cones N°8
(Instruction manual supplied with the set).

Output: 70 kg/hour depending on the type of disc and meat used.

12-12 meat mincer (Standard discs Ø 70mm)

The appliance is made up of a meat grinding assembly comprising one mincer body,
feed screw and nut for clamping the discs made of stainless steel and a feed screw
made of plastic for contact with food.
It is supplied with:

- 3 stainless still discs, Ø 70 mm, drilled with the following holes: Ø 3, Ø 4.5

and Ø 8 mm.

- 1 stainless steel self-sharpening blade

The following is available as an option: a set made up of three sausage cones N°12
(Instruction manual supplied with the set).

Output: 140 to 200 kg/hour depending on the type of disc and meat used.

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 7 / 16 www.santos.fr

USING THE MACHINE

USING FOR THE 1st TIME:

Attention: The meat must be boned and cut into pieces before being inserted into
the insertion chute

Preparation and use:

1. Insert the feed screw (3) with the friction washer (7) into the body of the mincer (1).
(Fig. 3). Attention: make sure this hexagonal drive friction washer is in place or this
could give rise to premature wearing of the parts in contact during operation.

2. Fit the blade (4) onto the square drive of the screw (3).

3. Fit the disc (5) drilled with the holes of the suitable diameter according to the work
to be carried out and position it with respect to the anti-rotation pin (15) of the body
of the mincer (1) (Fig. 4.a – 4.b)..

4. Screw up the nut (6) on the thread of the body of the mincer (1) and lock the
assembly.

5. Position the mincer body assembly onto the end piece of the motor (8), and tighten
the locking screw (2) (Fig. 5, Fig. 6).

6. Fit the meat pan (10) centred in the insertion chute of the body of the mincer (1)
and applied against the stops (13) (Fig. 7).

7. Prepare the products to be processed in small pieces and place them on the pan
(10).

8. Switch the on / off switch (14) to position « 1 ».

9. Place a container flush with the outlet near the disc (5) to take up the ground
products.

10. Insert the pieces of product to be processed into the insertion chute of the body of
the mincer (1) and push the pieces with the plunger (11).

NOTE:

In the event of jamming during operation, the motor can be started up again in the
opposite direction to unblock the feed screw (3) by switching the on/off switch (14) to
« R ».
If, however, the problem persists after a few attempts, you are advised to stop the
appliance by switching the on/off switch (14) to « 0 » and disconnecting the power cord
(12) from the appliance. Then clean and release the feed screw.

Stopping the appliance:

The appliance is stopped:

1. either by switching the on / off switch (14) to position « 0 »

2. or by unplugging the power cord plug (12) (Fig. 1).

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 8 / 16 www.santos.fr

Dismantling after use:

IMPORTANT:

• In every case, the appliance should be stopped and the appliance's power
supply cord (12) unplugged (Fig. 1).

1. Remove the plunger (11) and the meat pan (10) from the insertion chute of the
body of the mincer (1) (Fig. 7).

2. Unscrew the locking screw (2) (Fig. 6).

3. Remove the mincer body (1) assembly from the end piece of the motor (8).

4. Loosen and unscrew the nut (6) from the thread of the body of the mincer (1).

5. Take down the drilled disc (5), blade (4) and feed screw (3) with the friction washer
(7) (Fig. 2).

CLEANING

IMPORTANT:

• Stop the appliance and unplug the power supply cable.

• Cleaning in a jet of water or a high pressure spray is

prohibited.

• The motor unit (9) must not be immersed in water.

You are advised to clean the appliance as soon as it has finished being used.

To facilitate cleaning, do not allow foodstuff to dry in the body of the mincer (1), the
drilled disc (5), on the blade (4), or the feed screw (3).
The motor unit (9) is to be cleaned with a soft damp sponge, then dried.

MAINTENANCE

Prior to carrying out any intervention on the appliance, it must be
disconnected from the mains without fail.

Spare parts:

IMPORTANT: Use of spare parts other than certified original SANTOS

parts is prohibited

This appliance requires no particular maintenance because the bearings are lubricated for
life.

!

!

!

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 9 / 16 www.santos.fr

If servicing is necessary to replace any parts such as the electrical components, seals or
any others, refer to the list of components (see the exploded view at the end of the
manual).
note: gearbox (the worm and wheel must be replaced at the same time. You are advised
to also replace the seals of the reducing gear).

For all spare part orders (see references in the exploded view at the end of the manual),
state:

 the type,
 the machine serial number and
 the electrical specifications

recorded under the machine.

FAULT FINDING

Carefully determine the reason for the appliance stopping.

The appliance will not start:

• Check: the mains power supply and the condition of the power supply cord (12).

• Check the condition of the capacitor.

• Check the condition of the starting relay.

• Check that the thermal protective device has not tripped due to an overload (Fig. 8).

If the problem persists, switch off the power supply to the appliance (unplug the cord from
the mains socket (12)) and call in the maintenance service or contact a SANTOS-approved
dealer.

The appliance does not grind the meat properly:

• Check the state of wear of the disc and blade.

• Check the blade is in the correct position on the feed screw (the sharp part of the

blade must be the disc end).

The appliance stops because of an overload:

1. In the event of the motor blocking, switch the on/off switch (14) to « reverse
operation » “R” to overcome the blocking, if after a few attempts the blocking

persists, switch the on/off switch (14) to the stop position « 0 », then unplug the
power supply cord from its socket (12). Take down the body of the mincer and
clean.

2. The motor is protected by a thermal overload ampere metric device underneath the
appliance. In the event of an overload, this circuit-breaker trips, stops the motor and
cuts out the electrical power supply.
It must be reset manually to be able to start up again (Fig. 8).

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 10 / 16 www.santos.fr

MACHINE TECHNICAL SPECIFICATIONS

Model N° 12-8

N° 12-8

N° 12-12

N° 12-12

Supply voltage

(V)

220-240

100-120

220-240

100-120

Frequency

(Hz)

50 / 60

Motor: Rating

Power input

(W)

600

650

600

650

Feed screw speed:

(rpm)

140 to 50Hz 170 to 60Hz

Dimensions: Height

(mm)

430

Width

(mm)

260

Depth

(mm)

350

Useful dimensions of
Meat pan

(mm)

42 high x 218 wide x 306 long

Dimensions of Discs used

(mm)

62

70

Weight: Net weight

(kg)

17

19

Packaged weight

(kg)

18

20

Noise : (2)

(dBA)

63

63

(1) These ratings are provided as a rough guide. The exact electrical specifications can be found

on the rating plate.

(2) Noise level measured with sound pressure appliance in operation 1 m from its centerline in

accordance with standard EN 31201.

ITEM

Description

1

Mincer body

2

Locking screw

3

Feed screw

4

Blade

5

Drilled disc

6

Nut

7

Friction washer

8

End piece of motor

9

Motor unit

10

Meat pan

11

Plunger

12

Power supply cord

13

Pan stop

14

On/Off switch

15

Anti-rotation pin

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 11 / 16 www.santos.fr

WIRING DIAGRAMS

Wiring diagram 220-240V 50/60Hz

4 3 2

Starting relay
Brown

~

On/Off
White

White

Black

Brown

Capacitor

c

Thermal

protector

Black

Green/Yellow

White

White

a

d f 6 5 2

1

Blue

Brown

M

White

Blue

4

Brown

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 12 / 16 www.santos.fr

Wiring diagram 100-120V 50/60Hz

~

On/Off

White

Black

Brown

Thermal

protector

Green/Yellow

4

White

White

4 3 2

Blue

White

Capacitor

M

Yellow

White

Black

Brown

Red

f c a 1 2

5 6 d

White

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 13 / 16 www.santos.fr

FIGURES

Figure 1

14

12

Figure 2

1 7 3

4 5 6

Figure 3

7 3 1

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 14 / 16 www.santos.fr

Figure 6

2

Figure 4.b

15

Figure 4.a

15 5 1

Figure 5

8

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 15 / 16 www.santos.fr

Figure 7

11 2 13

10

1

9

Figure 8

SANTOS: Instruction and Maintenance Manual

98112 EN 2.2 - 05 2014 16 / 16 www.santos.fr

WARRANTY CERTIFICATE

WARRANTY

Since the 01.01.95, all our appliances comply with CE and possess the CE label. Our guarantee is
of 24 months from the manufacturing date mentioned on the descriptive plate, except concerning
the asynchronous motors (consisting of a rotor and a stator) which are warranted for 5 years from
their manufacturing date. Warranty is strictly limited to the free replacement of any part of origin
recognized by us as defective due to a defect or building default and identified as belonging to the
concerned appliance. Warranty does not apply to damages resulting from installation or use non­complying with our appliance data sheet (user’s manual) or in case of an evident lack of
maintenance or disrespect of elementary security electric rules. It does not apply in case of regular
wear and tear. Any replacement of parts under warranty will be realized after return of the
defective part in our workshops, postage paid, supported by a copy of a conformity statement on
which appears the serial number of the appliance. Every appliance is equipped with a descriptive
plate conforming to the EC recommendations and of which a duplicate exists in the conformity
statement (serial number, manufacturing date, electrical characteristics …). In case of serious
damage judged repairable only in our workshops, and after prior consent from our departments,
any appliance under guarantee is sent by the Distributor, carriage paid. In case of repairs or
reconditioning of appliances not under guarantee, the round trip transport is payable by the
distributor. The parts and workforce are invoiced at the current rate. A preliminary estimate can be
supplied.

Coffee grinder not using SANTOS original burrs are not taken under guarantee. The warranty
conditions, repairs, reconditioning, of the espresso coffee grinder are the object of a specific note.
Our guarantee does not extend to the payment of penalties, the repair of direct or indirect
damages and notably to any loss of income resulting from the nonconformity or the defectiveness
of products, SANTOS's global responsibility being limited to the sale price of the delivered product
and to the possible repair of the defective products.
In case of revelation of an imperfection during the warranty period, the Distributor has to, unless a
different written agreement of SANTOS, indicate to his customer to stop any use of the defective
product. Such a use would release SANTOS of any responsibility.

APPLIANCE IDENTIFICATION PLATE

SPECIMEN

For all the documents not delivered

with the appliance.

Printed, Faxed, Downloaded