Samsung WA85H4000H User Manual
Washing Machine
user manual
imagine the possibilities
Thank you for purchasing a Samsung product.
WA85H4000H
WA85H4000H_03218F_EN.indd 1WA85H4000H_03218F_EN.indd 1 2014-07-18 2:29:042014-07-18 2:29:04
English - 2
contents
SETTING UP YOUR WASHER
6
6 Description of part
9 How to wash automatically depends on the
laundry
10 Control Panel
MANUAL FUNCTIONS
14
14 Manual functions
INSTALLATION & MAINTENANCE
15
15 Environment
15 Levelling
16 Connecting the water supply hose
17 Assembling the rat protection panel
(applicable models only)
18 How to connect the drain hose (applicable
models only)
19 Adding detergent
19 Water supply connector fi lter
20 Cleaning the Dedicated Sink (applicable
models only)
20 Cleaning the fi lter
20 Cleaning the pump fi lter (applicable models
only)
20 Cleaning the detergent compartment
TROUBLESHOOTING
21
21 Troubleshooting
WASHING MACHINE WON’T WORK?
22
22 Washing machine won’t work?
SPECIFICATION
24
24 Specifi cation
WA85H4000H_03218F_EN.indd Sec9:2WA85H4000H_03218F_EN.indd Sec9:2 2014-07-18 2:29:132014-07-18 2:29:13
English - 3
safety instructions
Please note that the following precautions for safety intend to prevent unpredictable danger and damage by
helping the proper use in safety.
When using hot water in washing, please make sure that the water should not exceed 50 °C.
• Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.
IMPORTANT SAFETY PRECAUTIONS
WARNING: To reduce the risk of fi re, electric shock, or injury to persons when using your
appliance, follow basic precautions, including the following:
Do not let children (or pets) play in or on your washing
machine. The washing machine door does not open easily
from the inside and children may be seriously injured if
trapped inside.
This appliance is not to be used by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
For use in Europe : This appliance can be used by children
aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not
be made by children without supervision.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualifi ed persons
in order to avoid a hazard.
This appliance should be positioned so that the power plug,
the water supply taps, and the drain pipes are accessible.
01 SAFETY INSTRUCTIONS
WA85H4000H_03218F_EN.indd Sec2:3WA85H4000H_03218F_EN.indd Sec2:3 2014-07-18 2:29:132014-07-18 2:29:13
English - 4
For appliances with ventilation openings in the base, that a
carpet must not obstruct the openings.
The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
WARNING
There might be serious injury or fatal accident when you violate this instruction.
• Do not pull the cord off or touch it with moist hands.
− An electric shock or a fi re may take place.
• Do not bend the power supply cord by force or press it with heavy things.
− An electric shock or a fi re may take place.
• Do not install the washer nearby electric implement or don’t put a candle light or cigarette
light on the washer.
− A fi re may take place.
• During operation, do not put your hands or metal materials under the washer.
− You may be hurt by spinning board beneath the washer.
• Stay away from the washer when the bottom of the washer sinks into the water.
− There might be an electric shock. Please wait until the water drains out completely.
• Do not put laundry stained with gasoline, benzene, or alcohol in the washer, and keep the
materials away from the washer.
− An explosion or a fi re may take place.
• During spinning, don’t put your hand in the spinning tub.
− It may hurt your hands. If it does not stop within 15 seconds after you open the lid, call
service agent immediately.
• This appliance has to be connected to the plug endurable to proper power consumption.
• This appliance has to be positioned so that the plug is accessible after installation.
• No user-serviceable parts inside. Refer any servicing to qualified service personnel.
− Otherwise this may cause a mechanical error, electric shock, fi re or physical damage.
− The product warranty does not cover problems resulting from disassembling the product.
• Do not use this product for business purposes.
safety instructions
WA85H4000H_03218F_EN.indd Sec2:4WA85H4000H_03218F_EN.indd Sec2:4 2014-07-18 2:29:132014-07-18 2:29:13
English - 5
01 SAFETY INSTRUCTIONS
CAUTIONS
There might be a slight injury or damage when you violate this instruction.
• Don’t install it in the area with moisture or outdoor where it has rain or snow.
− An electric shock or a fi re may take place.
• Please unplug the power supply cord when you do not use it.
− An electric shock or a fi re may take place.
• If there is dust or water on the power supply plug and its connected part, please remove it
completely.
− An electric shock or a fi re may take place.
• Do not make your kids look into the inside of the washer.
− If your kid falls into the washer, his life could be in danger.
• Ventilate immediately without touching the power plug if gas is leaking.
− An electric shock or a fi re may take place if it catches fl ame.
• If the washer makes strange noise, smell or smoke, unplug it promptly and call service agent.
− An electric shock or a fi re may take place.
• When cleaning, don’t spray water to the parts of the washer directly.
− It may make its life span shorten.
Also an electric shock or fi re may take place.
• Do not use the strong acid cleaning agent.
• Don’t use several appliances together with an outlet.
− A fi re may take place due to unusual heat.
• Don’t press the button with an awl or pin.
− An electric shock or a fi re may take place.
• If the damage is found on the current cord in use, it should be replaced by manufacturer,
service center or authorized person in order to avoid the risk.
•
Connect the grounding wire to the shell plate, and bury it under at least 25cm of
earth:alternatively, connect the ground wire to the appropriate pin on a properly grounded power
receptacle. Never connect the wire to a telephone line, lightning rod, or gas pipe.
• The product you have purchased is designed for domestic use only.
The use for business purposes qualifies as product misuse. In this case, the product will not be
covered by the standard warranty provided by Samsung and no responsibility can be attributed
to Samsung for malfunctions or damages resulting from such misuse.
WA85H4000H_03218F_EN.indd Sec2:5WA85H4000H_03218F_EN.indd Sec2:5 2014-07-18 2:29:132014-07-18 2:29:13
English - 6
setting up your washer
DESCRIPTION OF PART
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
Water supply hose (Hot)
Water supply hose (Cold)
Dedicated Sink
Power cord
Water drain hose
Lid
Be sure to keep the lid closed
during washing and spinning.
Ground lead
When the water pipe
is metal, make sure
to cover the end of
the ground wire.
Spin basket
Water-Jet Button
Detergent box
Handle (Set Moving )
Control panel
Adjustable legs
Adjust the length
of the legs when
installing the washer.
Filter
Lint will be
collected in the
fi lter during
washing.
WA85H4000H_03218F_EN.indd Sec3:6WA85H4000H_03218F_EN.indd Sec3:6 2014-07-18 2:29:132014-07-18 2:29:13
English - 7
CHECKING BEFORE WASHING AND CARING FOR GARMENTS
Must follow the checkpoints in order to avoid machine problems or damages on garments.
• If the below problems are caused by customer’s faults, separate service fee will be charged.
Checkpoints Before Starting Washing
Check if the clothes are bleaching or not.
• Add liquid detergent to a white towel and the garment where you can’t notice well. Then, rub
together strongly. Check if the color transferred to the towel.
• Be careful for scarves and imported clothes since they are easily discoloring.
• Check for stains or partial dirt.
• If stains are found, use the towel wet with detergents to rub on in a single direction.
• Before washing, the sleeves, collar, dress hem and pockets are pre-treated by brushing with
detergents.
The wrinkle-processed clothes made of wool are specially treated by fi xing them with threads
before washing. The threads shall be removed after the clothes are dried.
Not washable laundry
Clothes those are easily transformable even by soaking in water.
• Even by soaking in water, neckties, brassieres, jackets, suits and coats can be easily
transformed like shrinking and discoloring on the garment surfaces because they are mostly
made of rayon, polynosic, cuff and their blend fabrics.
• The wrinkle-processed, embossed, or resin processed products are easy to transform even
by soaking in water.
• Easily discoloring products made of cotton and wool, wrinkled silk, leather products, leather
accessory, leather ornamented clothes and its accessory.
• Don’t wash those clothes without handling guideline or material indication tag.
About Detergent
• When detergents are not dissolving well, use warm water (about 40°C) to dissolve the
detergent.
• Use an appropriate amount.
• Even if excess amount of detergent is used, there is not much difference in washing
result. It may cause damages to the garments because rinsing is not enough.
• The bleaching agent may cause damages to garments since it is strong alkali.
• Do suffi cient rinsing because the powder detergent is easily remained on the garments
causing bad odors.
• If too much detergent is used or cold water is used, it doesn’t dissolve completely and
remain on the garments, hose or spin basket, causing contamination on clothes.
• In case of reserved washing, detergents must be put in the detergent box. If the powder
detergents are spread on laundry directly, it may cause discoloration.
02 SETTING UP YOUR WASHER
CAUTION
WA85H4000H_03218F_EN.indd Sec3:7WA85H4000H_03218F_EN.indd Sec3:7 2014-07-18 2:29:132014-07-18 2:29:13
English - 8
setting up your washer
CARING FOR CLOTHES BEFORE WASHING
Take out personal belongings from pockets.
• Caution, Check the pockets! Hairpins and coins cause damages to
clothes and washing machine. They make noise and problems to
the machine. Must check the pocket.
If pants zippers are open while washing, the spin basket may be
damaged. The zipper should be closed and fi xed with a string
before washing.
• Metal on the clothing may cause damage to the clothes and the tub.
• Turn clothing with buttons and embroidered clothes inside out before
washing them.
• Clothing with long strings may become entangled with other clothes,
and may cause damage to the clothing. Be sure to fi x the strings
before washing.
Waterproof clothes (Ski Wear, Diaper Covers, Footboards) are not
allowed for washing.
• This may cause the laundry to be ejected or cause the washing machine to vibrate
abnormally, which may result in personal injury or damage the washing machine, the fl oor
or the clothing. (Diapers, waterproof clothing, raincoats, umbrella covers, skiwear, car cover
sheets, and sleeping bags, etc.).
• When the tub rotates, water may become trapped in the waterproof clothing or fabric and
can collect in a corner, causing abnormal vibrations. In addition, the laundry rises and may be
ejected and cause personal injury.
Shake the dirt or soils from clothes.
• Soil and sands may rub delicate garments to cause damages and the washing result may be
unsatisfactory.
Do pre-washing for white socks, sleeves, and collars before the main washing.
• For stains and dirt on collars, sleeves, hems, and pockets, apply some detergent to them
and apply it lightly with a brush before washing.
• Use powdered or liquid detergent. Do not use soap as the tub may become dirty from the
dirt on it.
Turn inside out for those nappy clothes before washing.
• If clothes have too much foreign matter, separate them for washing.
Other clothes may pick up those dirty matters (dirt, thread).
• Wash black colored clothes and cotton towels separately. If they are
washed together, towels may pick up dirty matters. Check before
washing.
Cashmilon and those garments having big volume and lightweight
(eg. Lasedecorated clothes, lingerie, nylon stocking, synthetic
fabrics etc.) may rise and cause damages to the clothes and
problems to the machine. Use the laundry net or wash them
separately.
• Must put those long stringed clothes, lase-worked clothes, bed cover
sheet, wool clothes into a laundry net before washing.
• Put delicate clothes in the laundry net.
• Use only those commercial laundry net for washing.
WA85H4000H_03218F_EN.indd Sec3:8WA85H4000H_03218F_EN.indd Sec3:8 2014-07-18 2:29:132014-07-18 2:29:13
English - 9
Curtains, fl oating garments or blue jeans shall be pressed not to fl oat on the water.
• If they are floated on the water, press Start/Pause button to stop and press them to sock in
the water. If the washing goes on with clothes floating on the water, it may cause damages to
the clothes and the washing machine as well as unsatisfactory washing result.
Put only washing cloths on EZ WASH TRAY. Heavy cloths
& thing not to be kept.
• Don’t put candle & Hot Things on washing machine.
HOW TO WASH AUTOMATICALLY DEPENDS ON THE LAUNDRY
Before starting washing, check the following;
• Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure
to lay down the drain hose.
Washing for the fi rst time
Before washing clothes for the fi rst time, you must run a complete cycle without clothes.
To do this:
1. Press the Power button.
2. Open the detergent drawer and insert a little detergent.
3. Turn on the water supply to the washing machine.
4. Press the Start/Pause button.
This will remove any water from the manufacturer’s test run remaining in the machine.
Special notes!
Automatic Sensing Function
• According to the selected program, the amount of laundry is automatically sensed and then
the appropriate water level, wash time, rinse cycle, and spinning time are automatically
selected for the automatic wash.
• After the power is on, a program is selected and Start/Pause button is pressed. Then,
the washing board starts spinning without water. This action senses how much laundry is
in the washing basket, not a machine problem. After this sensing process, water supplies
automatically.
Adding Detergent and Softener
• It senses the amount of laundry and indicates the water level and amount of detergent. Then,
it starts water supply right away.
• During the water supply, it is possible to open the detergent box and add detergent.
However, it is better to press Start/Pause button to stop water supply and add detergent.
Close the lid and press Start/Pause button again. This way is much more convenient.
Put the laundry into the washer and add detergent, too.
• Be careful not to overload. Use right detergent for the fabrics you are washing.
• If the lid is open while running, the washing machine is stopped automatically for safety.
(Except, water supply continues while the lid is open.)
• When hot water is selected, both cold and hot water are supplied for the first
20 seconds in order to protect the clothes.
• Possible to control the washing time, rinsing cycle, and spinning time at every program
during the washing.
02 SETTING UP YOUR WASHER
WA85H4000H_03218F_EN.indd Sec3:9WA85H4000H_03218F_EN.indd Sec3:9 2014-07-18 2:29:132014-07-18 2:29:13
English - 10
setting up your washer
CONTROL PANEL
For more details, see control panel of your washing machine.
1
Digital graphic
display
Displays the remaining wash time.
Displays the error state if a problem occurs in the washing machine so that
you can take action.
2
Water Level
The water level is automatically adjusted. However, you can select the water
level manually by pressing this button.
3
Activ Wash+
This is available only when you press the Power button and the washing
machine enters Standby. The default is Water Save.
Select Water Save > Drain
Water Save: This option reduces water consumption.
Drain: Drains the water used in the prewash. In this process, no other
course is available for selection. However, the Power and the Activ Wash+
buttons are still available for selection. Use either button to stop draining the
water.
For built-in pump-drained models
You cannot stop draining in the middle of the process.
No other course is available for selection.
After the draining is complete, the washing machine automatically
switches to Water Save, and you can then select any courses.
• General models also switch to Water Save automatically after the
draining is complete, and then you can select any courses.
4
Wash
Press this button to perform a wash only or to adjust the washing time.
You can set the wash time from between 6 to 30 minutes.
5
Rinse
Press this button to perform a rinse only or to adjust the rinse count.
You can set the rinse count up to fi ve times.
6
Power Spin
Press this button to perform a spin cycle only or to adjust the spin time.
You set the Spin time in this sequence: 1~9 min > 15 min > 30 min.
When only a spin is selected, the spin time will be different from the total
remaining time. This is because the total remaining time includes the actual
spin time and the times for water draining and stopping.
7
Power
Press this button once to operate.
Press it again to turn the power off.
2 3 4 5 6 8
1 7
9
WA85H4000H_03218F_EN.indd Sec3:10WA85H4000H_03218F_EN.indd Sec3:10 2014-07-18 2:29:132014-07-18 2:29:13
English - 11
8
Start/Pause
Use to pause and restart the operation.
To change the washing procedure during an operation,
press this button to stop, and again to restart after changing the procedure.
9
Cycle
Fuzzy Selects the best washing program automatically.
Quick
If you want to wash those frequently used towels
or less dirty laundry time. Because washing is
speedy, it is good for light or less stained laundry.
Soak
Press this button to perform a soak wash.
Soak time is set up as minutes. Can not change
the soak time.
Jeans For a more thorough wash.
Blanket
Big volume laundry like blanket and bed cover
sheets
Delicate Washable sweater, cardigan, delicate clothes etc.
Eco Tub Clean (3 sec)
Hold down for 3 seconds to turn off the Eco Tub
Clean.
Use this program to clean the tub, it will keep the
tub clean and sanitary.
The TUB CHECK LED is turned on to notify the
user that it is time to clean the tub.
The powerful spinning force of the washing tub
pulsator removes the contaminations from the
exterior of the washing tub to prevent odors or
secondary contamination.
The Eco Tub Clean indicator turns on in the
following:
• If Eco Tub Clean is active.
• If the tub is diagnosed to be cleaned.
02 SETTING UP YOUR WASHER
WA85H4000H_03218F_EN.indd Sec3:11WA85H4000H_03218F_EN.indd Sec3:11 2014-07-18 2:29:142014-07-18 2:29:14
English - 12
setting up your washer
CHILD LOCK
This function is for protecting children, the elderly and the frail.
1. Press the Power button.
2. To activate the Child Lock function, press and hold both the Rinse and Power Spin buttons
down simultaneously for 3 seconds. (If the Child Lock function is activated, the Child Lock
icon blinks.)
3. Operations after activating the Child Lock function.
• Even if the Child Lock function is activated, every button works until the door opens.
• When you open the door during the Child Lock is being activated, the alarm sounds and
an error message appears. In 30 seconds, draining begins automatically. However, if you
close the door within 30 seconds, water will not be drained. (Displayed error message
“CL”, “dE”).
• To add laundry after activating the Child Lock function, you must deactivate the
Child Lock function.
• The Power button is disabled while the washing machine drains water in Child Lock
mode.
4. To deactivate the Child Lock function, press and hold both the Rinse and Power Spin
buttons simultaneously for 3 seconds again. (If the Child Lock function is deactivated, the
Child Lock icon is turned off.)
5. To clear “CL” display, after draining is complete, close the door of the washing turn the main
i/p power off and then on.
- This function is for preventing injury and malfunction of the product because of
inappropriate operations or actions by children, the elderly or the frail.
- If the door opens when the Child Lock function is activated, the water is drained by
force to prevent children from drowning.
- To add laundry after activating the Child Lock function, you must deactivate the
Child Lock.
- Even if the power is turned off and then on when the Child Lock is activated, the
Child Lock remains activated.
- Once Child Lock is activated, even when the power is turned off, if the door is
opened, water is automatically drained in 30 seconds.
- The Child Lock function cannot be deactivated when CL is displayed. (However, the
Child Lock function can be deactivated when the dE error is displayed.)
CAUTION
WA85H4000H_03218F_EN.indd Sec3:12WA85H4000H_03218F_EN.indd Sec3:12 2014-07-18 2:29:142014-07-18 2:29:14
English - 13
Water Jet (applicable models only)
Water Jet helps do a hand-wash as part of prewash. Press the
Water Jet button on the right side of the washing machine to
activate Water Jet; press the button again to deactivate it.
Water Jet is not available in the following:
• If the door is closed (Water Jet will turn off if the door is
closed while in operation)
• When the water level is set to the highest level
Water Jet is available before the washing machine starts operation. If you want to do a
hand-wash during the operation, fi rst stop the operation by pressing the Start/Pause
button, and then press the Water Jet button to do the hand-wash.
To enable the Dedicated Sink (applicable models only)
This tray is designed for the prewash, which looks like a
washboard.
Press the Water Jet button to apply water into the Dedicated Sink
for the prewash.
When the prewash is complete, you can use the water again for
the next cycles, or simply drain it.
To drain the water, select Drain in the Active Wash+ course.
If reusing the water, the water level will be automatically set to 5,
the highest level regardless of the course selected.
02 SETTING UP YOUR WASHER
WA85H4000H_03218F_EN.indd Sec3:13WA85H4000H_03218F_EN.indd Sec3:13 2014-07-18 2:29:142014-07-18 2:29:14
English - 14
manual functions
Possible to select the function for each program.
(Example) For a simple washing as the little dirt program :
Power Select the little dirt program Wash Start/Pause
WASH ONLY
Press the Power button.
Press the Wash button.
Press the Start/Pause button.
Detects the amount of laundry, and determines wash and rinse time
period automatically. (Option)
Washing goes on for 1 time.
When the Wash button is pressed during washing, the wash time
can be changed to between 6 and 30 minutes in duration.
RINSE ONLY
Press the Rinse button.
Press the Start/Pause button.
The number of the Rinse cycles depends on the course.
When the Rinse button is pressed, the rinse times can be changed
to between 1 to 5 times in duration.
Detects the amount of laundry, and determines wash and rinse time
period automatically. (Option)
SPIN ONLY
Press the Power Spin button.
Press the Start/Pause button.
The dry time depends on the course.
When the Power Spin button is pressed, the spin time can be
changed to from 1~9 min > 15 min > 30 min.
WASH AND RINSE
Press the Wash and Rinse button.
Press the Start/Pause button once.
Detects the amount of laundry, and determines wash and rinse time
period automatically. (Option)
When the Wash and Rinse button is pressed, wash time period is
determined between 6 to 30 minutes, and rinse time is determined
between 1 and 5 times.
RINSE AND SPIN
Press the Rinse and Power Spin button.
Press the Start/Pause button once.
Rinsing and spin drying follow.
When the Rinse and Power Spin button is pressed, the number of
rinse times is determined between 1 and 5, and spin time period for
drying is determined between 1~9 min > 15 min > 30 min.
Detects the amount of laundry, and determines wash and rinse time
period automatically. (Option)
WASH, RINSE AND SPIN
Press the Wash, Rinse and Power Spin button.
Press the Start/Pause button once.
Wash, Rinse and Power Spin is performed.
Detects the amount of laundry, and determines wash and rinse time
period automatically. (Option)
When turning on the washing machine, it remembers the last run course and automatically proceed
with the course.
• However, the Eco Tub Clean course is not remembered.
WA85H4000H_03218F_EN.indd 14WA85H4000H_03218F_EN.indd 14 2014-07-18 2:29:142014-07-18 2:29:14
English - 15
installation & maintenance
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
ENVIRONMENT
Leave some space
Maintain at least 10 cm between the washer and the wall.
Place the washer on a sturdy fl at surface.
If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Allowable is 1˚)
Adjust the legs for even placement.
Never install the washer near water.
Do not place the washer in steamy rooms or where the washer is directly exposed to rain. Moisture may
destroy the electrical insulation causing an electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic an electrical components are affected by direct heat, never place the washer near furnaces,
boilers, etc. Do not place under direct sunlight.
LEVELLING
• If the washer is not leveled with the ground, it makes the machine tremble more or be out of order. So,
make sure that the washer is leveled properly.
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
• Open the lid of the machine, pour water into the tub up
to the level just below the pulsator, and adjust the legs so
that the pulsator is positioned at the center of the water as
shown in the fi gure.
• Place the machine more than 10 cm away from the wall.
• Adjust the legs on feet for levelling.
• Do not use stand, trolley and bricks for Washing Machine
Installation
Water
LOOSEN
LOCK
04 INSTALLATION & MAINTENANCE
WA85H4000H_03218F_EN.indd Sec10:15WA85H4000H_03218F_EN.indd Sec10:15 2014-07-18 2:29:152014-07-18 2:29:15
English - 16
CONNECTING THE WATER SUPPLY HOSE
1. Remove the adaptor from the water supply hose.
2. First, using a “+” type screw driver, loosen the four screws
on the adaptor. Next, take the adaptor and turn part (b)
following the arrow for gap about 5 mm between them.
3. Connect adaptor to the water tap by tightening the screws
fi rmly. Then, turn part (b) following the arrow and put (a)
and (b) together.
a
b
4. Connect the water supply hose to the adaptor. Pull down
the part (c) of the water supply hose. When the part (c)
is released, the hose is automatically connected to the
adaptor making a ‘click’ sound.
c
5. Connect the other end of the water supply hose to the
inlet water valve at the back of the washer. Screw the hose
clockwise all the way in.
5-1. Connect the other end of the water supply hose to the
inlet water valve at the back side of the washer. Screw
the hose clockwise all the way in.
• If the water tap is a screw type, assemble a water supply
hose that fits to the tap as shown. After completing
connection, if water leaks from the hose, then repeat the
same steps.
After completing connection, if water leaks from the hose, then repeat the same steps.
Use the most conventional type of faucet for water supply.
In case the faucet is square or too big, remove the spacing ring before inserting the faucet
into the adaptor.
installation & maintenance
5 mm
WA85H4000H_03218F_EN.indd Sec5:16WA85H4000H_03218F_EN.indd Sec5:16 2014-07-18 2:29:152014-07-18 2:29:15
English - 17
ASSEMBLING THE RAT PROTECTION PANEL
(APPLICABLE MODELS ONLY)
Tilt the washer a little, insert the shutter and fi nally fi x the shutter with screw to the base as
shown in the picture.
1. Insert the rat protection panel to the
assembling hole on back side to the end.
2. If you have diffi culty inserting the panel lift
up the washer a little and insert it.
Rear Side
04 INSTALLATION & MAINTENANCE
WA85H4000H_03218F_EN.indd Sec5:17WA85H4000H_03218F_EN.indd Sec5:17 2014-07-18 2:29:152014-07-18 2:29:15
Loading...