TXM1967
TXM1367
TXM1997
COLOR TELEVISION
............. |
Owner’s |
|
|
|
Instructions |
Printed in Mexico
AA68-02340A (ENG)
Warning! Important
Safety Instructions
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
Note to CATV system installer: This reminder is provided to call CATV system installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
Caution: FCC/CSA regulations state that any unauthorized changes or modifications to this equipment may void the user’s authority to operate it.
Caution: To prevent electric shock, match the wide blade of plug to the wide slot, and fully insert the plug.
Attention: pour eviter les chocs electriques, introduire la lame le plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.
Important: One Federal Court has held that unauthorized recording of copyrighted TV programs is an infringement of U.S. copyright laws.
Certain Canadian programs may also be copyrighted and any unauthorized recording in whole or in part may be in violation of these rights.
To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.
Thank You for Choosing Samsung
Thank you for choosing Samsung! Your new Samsung TV receiver represents the latest in television technology. It has easy-to-use, on-screen menus and closed-captioning capabilities, making this TV one of the best products in its class. This product will provide convenient, dependable service and enjoyment for years to come.
Important Safety Information
To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine.
•Read all safety and operating instructions before operating the TV receiver.
•Retain the safety and operating instructions for future reference.
•Heed all warnings on the TV receiver and in the operating instructions.
•Follow all operating instructions.
•Unplug the TV receiver from the wall outlet before cleaning, Use a damp cloth, Do not use liquid or aerosol cleaners.
•Never add any attachments and/or equipment without approval of the manufacturer. Such additions may cause risk of fire, electric shock, or other personal injury.
•Do not use the TV receiver where contact with or immersion in water is a possibility, such as near bath tubs, sinks, washing machines, swimming pools, etc.
•Do not place the TV receiver on an unstable cart, stand, tripod, bracket, or table. The TV receiver may fall, causing injury to people and/or damage to the TV. Use only with a cart, stand, tripod, bracket, or table not recommended by the manufacturer or sold with the TV receiver.
•Follow the manufacturer’s instructions when mounting the unit, and use a mounting accessory recommended by the manufacturer. Move the TV receiver and its cart with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart to overturn.
•Provide ventilation for the TV receiver. The unit is designed with slots in the cabinet for ventilation to protect it from overheating. Do not block these openings with any object, and do not place the TV receiver on a bed, sofa, rug, or other similar surface. Do not place it near a radiator or heat register. If you place the TV receiver on a rack or bookcase, ensure that there is adequate ventilation and that you’ve followed the manufacturer’s instructions for mounting.
•Operate your TV receiver only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appliance dealer or local power company.
•Use only a grounded or polarized outlet. For your safety, this TV is equipped with a polarized alternating-current line plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact your electrician to replace your outlet.
SAFETY 1
•Protect the power cord. Power supply cords should be routed so that they will not be walked on or pinched by items placed on or against them. Pay particular attention to cord placement at plugs, convenience receptacles, and at the point where they exit from the unit.
•Unplug the TV receiver from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-line surges.
•An outside antenna system should not be placed in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits. Avoid overhead power lines: When installing an outside antenna system, be extremely careful to keep from touching the power lines or circuits. Contact with such lines might be fatal.
•Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.
•Do not insert foreign objects through openings in the unit, as they may touch dangerous voltages or cause damage. Never spill liquid of any kind on the TV receiver.
•Ground outdoor antennas. If an outside antenna or cable system is connected to the TV receiver, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Read information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
•Do not attempt to service the TV receiver yourself. Refer all servicing to qualified service personnel. Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:
-When the power-supply cord or plug is damaged
-If liquid has been spilled on the unit or if objects have fallen into the TV
-If the TV receiver has been exposed to rain or water
-If the TV receiver does not operate normally by following the operating instructions
-If the TV receiver has been dropped or the cabinet has been damaged
-When the TV receiver exhibits a distinct degradation in performance
•If you make adjustments yourself, adjust only those controls that are covered by the operating instructions. Adjusting other controls may result in damage and will often require extensive work by a qualified technician to restore the TV receiver to normal.
•When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in additional damage to the unit.
•Upon completion of any service or repairs to this TV receiver, ask the service technician to perform safety checks to determine that the TV receiver is in a safe operating condition.
2 SAFETY
1) |
Read these instructions. |
DOUBLE INSULATED - When servicing |
|
2) |
Keep these instructions. |
||
use only identical replacement parts. |
|||
|
|
3)Heed all warnings.
4)Follow all instructions.
5)Do not use this apparatus near water.
6)Clean only with dry cloth.
7)Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
8)Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat.
9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10)Protect the power cord from being from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11)Only use attachments/accessories specified by the manufacturer.
12)Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a used, caution when moving the cart/apparatus combination to avoid injury from tip-over.
13)Unplug this apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
SAFETY 3
Chapter 1: Your New TV . . . . . . . . . . . . . . .1.1
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Familiarizing Yourself with The TV. . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Front Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Remote Control (Type 1) . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 Remote Control (Type 2) . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5
Chapter 2: Installation . . . . . . . . . . . . . . . . 2.1
Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . 2.1 Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . 2.2 Separate VHF and UHF Antennas. . . . . . . . . . . . . . . . . . . . 2.2 Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . 2.2
Connecting to a Cable Box that Descrambles
All Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 Connecting to a Cable Box that Descrambles
some Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 Connecting a Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7 Installing Batteries in the Remote Control. . . . . . . . . . . . . . . . . . . . . 2.8
Chapter 3: Operation . . . . . . . . . . . . . . . . . . 3.1
Turning the TV On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 Viewing the Menus and On-Screen Displays. . . . . . . . . . . . . . . . . . . 3.1 Viewing the Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 Selecting a Menu Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 Memorizing the Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . 3.3 Storing Channels in Memory (Automatic Method) . . . . . . . 3.4 Adding and Erasing Channels (Manual Method) . . . . . . . . 3.5
Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 Using the Channel Buttons. . . . . . . . . . . . . . . . . . . . . . . . . 3.6 Directly Accessing Channels . . . . . . . . . . . . . . . . . . . . . . . . 3.6 Using the PRE-CH Button to select the Previous Channel. . 3.6
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 Using Mute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8 Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9 Auto Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.10 Viewing a VCR or Camcorder Tape. . . . . . . . . . . . . . . . . . . . . . . . . . 3.11
1 CONTENTS
Chapter 4: Special Features . . . . . . . . . . . . 4.1
Customizing Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 Setting Up Your Remote Control to Operate Your VCR. . . . 4.1 Setting Up Your Remote Control to
Operate Your Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 Fine Tuning Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4 Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 Using the Surf Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 Setting the On/Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7 Setting the Sleep Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8 Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9 Using the V-Chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10
Setting Up Your Personal ID Number (PIN) . . . . . . . . . . . . 4.10 How to Enable/Disable the V-Chip . . . . . . . . . . . . . . . . . . . 4.11 How to Set up Restrictions Using the “TV guidelines” . . . . 4.11 How to Set up Restrictions using the MPAA Ratings:
G, PG, PG-13, R, NC-17, X . . . . . . . . . . . . . . . . . . . . . . . . 4.13 How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.14
Chapter 5: Troubleshooting . . . . . . . . . . . . 5.1
Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1
Cleaning and Maintaining Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . A.1
Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . A.1
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1
CONTENTS 2
List of Features
Your TV was designed with the latest technology. This TV is a high-performance unit that includes the following special features:
•Easy-to-use remote control
•Easy-to-use on-screen menu system
•Automatic timer to turn the TV on and off
•Adjustable picture setting that can be stored in the TV’s memory
•Automatic channel tuning for up to 181 channels
•A special filter to reduce or eliminate reception problems
•Fine tuning control for the sharpest picture possible
•Tri-lingual on-screen displays (English, Spanish, and French)
•A special sleep timer
1.1 CHAPTER ONE: YOUR NEW TV
Familiarizing Yourself with The TV
Front Panel Buttons
The buttons on the front panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.
ŒMENU
Press to see an on-screen menu of your TV's features.
´VOL – , +
Press to increase or decrease the volume. Also used to select items on the on-screen menu.
ˇCH ▼ and CH ▲
Press to change channels. Also press to select various items on the on-screen menu.
¨Remote Control Sensor
Aim the remote control towards this spot on the TV.
ˆSTAND BY
Lights up when you turn the power off.
ØPOWER
Press to turn the TV on and off.
Front Panel Jacks
You can use the front panel jacks to connect an A/V component that is used only occasionally, such as a camcorder or video game. (For information on connecting equipment, see pages 2.1 – 2.7.)
ΠEARPHONE jack
Connect a set of external earphones to this jack for private listening.
´ VIDEO and AUDIO input jacks
Use this jacks to connect a camcorder or a video game.
CHAPTER ONE: YOUR NEW TV 1.2
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR.
For more information on connecting equipment, see pages 2.1 – 2.7.
ŒVIDEO and AUDIO input jacks
Use these jacks to connect a VCR or other video equipment.
´VHF/UHF Antenna terminal
Use this terminal to connect an outdoor antenna or cable system.
1.3 CHAPTER ONE: YOUR NEW TV
Remote Control (Type 1)
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV.
ŒPOWER
Press to turn the TV on and off.
´TV/VIDEO
Press to watch TV picture and a picture from a connected component (VCR, LDP etc.).
ˇNumber buttons
Press to directly select channels on the TV.
¨+100
Press to directly select channels over 100. For example, to select channel 121, press +100, then press 2 and 1.
ˆCH ▲ and CH ▼ (Channel)
Press CH ▲ or CH ▼ to change channels. Also use with the on-screen menu system.
ØDISPLAY
Press to see the time, channel, etc., on-screen. Also press to exit (quit) the menu system.
¸SURF
Press when viewing a channel to automatically return to that channel after an amount of time that you set.
”P-STD
Press to adjust the TV picture by selecting one of the special factory settings or your own custom setting.
’MUTE
Press to mute (silence) the volume.
˝MENU
Press this button to see the easy-to-use menu system.
ÔVOL – and VOL + (Volume)
Press VOL – to lower the volume; press VOL + to raise the volume. Also use with the menu system.
ðSLEEP
Press for the TV to automatically turn off after an amount of time that you set.
ÒCH.SCAN (Channel Scan)
Press to have the TV automatically scan all of the channels it has memorized.
ÚPRE-CH (Previous Channel)
Press to see the last channel you were watching.
For models: TXM1367 / TXM1967
CHAPTER ONE: YOUR NEW TV 1.4
Remote Control (Type 2)
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV.
You can also use your remote control to operate most VCR’s and cable boxes. See page 4.1 for details.
ŒPOWER
Press to turn the TV on and off.
´Number buttons
Press to directly select channels on the TV.
ˇSLEEP
Press for the TV to automatically turn off after an amount of time that you set.
¨ADD
Press to add channels or to add features while working with the on-screen menus.
The ADD button does not work for this TV set. (Function not used)
ˆERASE
Press to erase channels or to canel features while working with the on-screen menus.
The ERASE button does not work for this TV set. (Function not used)
Ø+100
Press to directly select channels over 100. For example, to select channel 121, press +100, then press 2 and 1.
¸REW(Rewind)
Press to rewind a tape in your VCR.
”REC
Press to begin recording with your VCR.
’STOP
Press to stop a tape in your VCR.
˝MUTE
Press to mute (silence) the volume.
ÔCH ▲ and CH ▼ (Channel)
Press CH ▲ or CH ▼ to change channels. Also use with the on-screen menu system.
ðP-STD
Press to adjust the TV picture by selecting one of the special factory settings or your own custom setting.
For model: TXM1997
1.5 CHAPTER ONE: YOUR NEW TV
Remote Control (Type 2)
ÒTV
Press to use your remote control to operate your TV.
ÚVCR
Press to use your remote control to operate your VCR.
ÆCABLE
Press to use your remote control to operate a cable box.
ıSET
Use this button when you are setting up your remote control to operate your VCR or cable box.
˜DISPLAY
Press to see the time, channel, etc., on-screen. Also press to exit (quit) the menu system.
¯PLAY
Press to play the tape in your VCR.
˘FF (Fast Forward)
Press to fast forward the tape in your VCR.
¿PAUSE
Press to pause your VCR’s tape.
¸SKIP TIMER
Press when viewing a channel to automatically return to that channel after an amount of time that you set.
For model: TXM1997
˛TV/VIDEO
Press to switch between a TV picture and a picture from a connected component (VCR,LDP etc.).
×VOL – and VOL + (Volume)
Press VOL – to lower the volume; press VOL + to raise the volume. Also use with the menu system.
±MENU
Press this button to see the easy-to-use menu system.
PRE-CH (Previous Channel)
Press to see the last channel you were watching.
CHAPTER ONE: YOUR NEW TV 1.6
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads,” below.
If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads,” on page 2.2.
If you have two antennas, see “Separate
VHF and UHF Antennas,” on page 2.2.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300-ohm twin flat leads, follow the directions below.
1
Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws.
2
Plug the adaptor into the VHF/UHF terminal on the bottom of the back panel.
2.1 CHAPTER TWO: INSTALLATION
Antennas with 75-ohm Round Leads
1
Plug the antenna lead into the VHF/UHF
terminal on the bottom of the back panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires a an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna leads to the combiner.
2
Plug the combiner into the VHF/UHF terminal on the bottom of the rear panel.
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1 |
|
|
Because this TV is cable-ready, |
|
|
||
|
|
you do not need a cable box to view |
|
Plug the incoming cable |
|
|
unscrambled cable channels. |
into the VHF/UHF antenna |
|
|
|
terminal on back of the TV. |
|
|
|
|
|
|
|
|
|
|
|
CHAPTER TWO: INSTALLATION 2.2
Loading...