Samsung SCX-3200 Series, SCX-3205, SCX-3205W, SCX-3205W(K) Series User Manual

SCX-3200 Series

Multi-Functional Mono Printer

User’s Guide

imagine the possibilities

Thank you for purchasing a Samsung product.

Copyright_ 2

copyright

© 2010 Samsung Electronics Co., Ltd. All rights reserved.
This user’s guide is provided for information purposes only. All information included herein is subject to change without notice.
Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.

• Samsung and the Samsung logo are trademarks of Samsung Electronics Co., Ltd.

• PCL and PCL 6 are trademarks fo Hewlett-Packard Company.

• Microsoft, Windows, Windows Vista, Windows 7, and Windows Server 2008 R2 are either registered trademarks or trademarks of Microsoft Corporation.

• PostScript 3 is a trademark of Adobe System, Inc.

• USFT® and MicroType™ are registed trademarks of Monotype Imaging Inc.

• iPad, iPhone, iPod touch, TrueType, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S and other countries. AirPrint and the AirPrint logo are

trademarks of Apple Inc.

• LaserWriter is a trademark of Apple Inc.

• All other brand or product names are trademarks of their respective companies or organizations.

Refer to the 'LICENSE.txt' file in the provided CD-ROM for the open source license information.

REV. 1.01

Safety information_ 3

safety information

These warnings and precautions are included to prevent injury to you and others, and to prevent any potential damage to
your machine. Be sure to read and understand all of these instructions before using the machine.

Use common sense for operating any electrical appliance and whenever using your machine. Also, follow all warnings and
instructions marked on the machine and in the accompanying literature. After reading this section, keep it in a safe place
for future reference.

IMPORTANT SAFETY SYMBOLS

This section explains the meanings of all icons and signs in the user's guide. These safety symbols are in order, according to the degree of
danger.

Explanation of all icons and signs used in the user’s guide:

Warning Hazards or unsafe practices that may result in severe personal injury or death.

Caution Hazards or unsafe practices that may result in minor personal injury or property damage.

Do not attempt.

Do not disassemble.

Do not touch.

Unplug the power cord from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Follow directions explicitly.

OPERATING ENVIRONMENT

Warning

Do not use if the power cord is damaged or if the
electrical outlet is not grounded.

► This could result in electric shock or fire.

Do not bend, or place heavy objects on the power
cord.

► Stepping on or allowing the power cord to be
crushed by a heavy object could result in electric
shock or fire.

Do not place anything on top of the machine (water,
small metal or heavy objects, candles, lit cigarettes,
etc.).

► This could result in electric shock or fire.

Do not remove the plug by pulling on the cord; do not
handle the plug with wet hands.

► This could result in electric shock or fire.

Safety information_ 4

Caution

During an electrical storm or for a period of
non-operation, remove the power plug from the
ele

ctrical outlet.

► This could result in electric shock or fire.

If the plug does not easily enter the electrical outlet, do not
attempt to force it in.

► Call an electrician to change the electrical outlet, or this
could result in electric shock.

Be careful, the paper output area is hot.
► Burns could occur.

Do not allow pets to chew on the AC power, telephone or PC
interface cords.

► This could result in electric shock or fire and/or injury to your
pet.

If the machine has been dropped, or if the cabinet appears
damaged, unplug the machine from all interface connections
and

request assistance from qualified service personnel.

► Otherwise, this could result in electric shock or fire.

If the machine does not operate properly after these
instructions have been followed, unplug the machine from all
interface conn

ections and request assistance from qualified

service personnel.
► Otherwise, this could result in electric shock or fire.

If the machine exhibits a sudden and distinct change in
performance, unplug the machine from all interface
conn

ections and request assistance from qualified service

personnel.
► Otherwise, this could result in ele

ctric shock or fire.

OPERATING METHOD

Caution

Do not forcefully pull the paper out during printing.
► It can cause damage to the machine.

When printing large quantities, the bottom part of the
paper output area may get hot. Do not allow children
to touch.

► Burns can occur.

Be careful not to put your hand between the machine
and paper tray.

► You may get injured.

When removing jammed paper, do not use tweezers
or sharp metal objects.

► It can damage the machine.

Do not block or push objects into the ventilation opening.
► This could result in elevated component temperatures which

can cause damage or fire.

Do not allow too many papers to stack up in the paper output
tray.

► It can damage the machine.

Be care when replacing paper or removing jammed paper.
► New paper has sharp edges and can cause painful cuts.

This machine's power interception device is the power cord.
► To switch off the power supply, remove the power cord from

the el

ectrical outlet.

If the machine gets overheated, it releases smoke,
makes strange noises, or generates an odd odor,
imme

diately turn off the power switch and unplug the

machine.
► This could result in electric shock or fire.

Safety information_ 5

INSTALLATION / MOVING

Warning

Do not place the machine in an area with dust,
humidity or water leaks.

► This could result in electric shock or fire.

Caution

Before moving the machine, turn the power off and
disconnect all cords.
Then lift the machine:

•

If the machine weighs under 20 kg (44.09lb), lift with

1 person.

• I

f the machine weighs 20 kg (44.09lb) - 40kg

(88.18lb), lift with 2 people.

• If the machine weighs more than 40 kg (88.18lb), lift

with 4 or more people.

► The machine could fall, causing injury or machine damage.

Do not put a cover over the machine or place it in an airtight
location, such as a closet.

► If the machine is not well-ventilated, this could result in fire.

Do not place the machine on an unstable surface.
► The machine could fall, causing injury or machine damage.

Make sure you plug the power cord into a grounded electrical
outlet.

► Otherwise, this could result in electric shock or fire.

The machine should be connected to
the power level which is specified on the label.

► If you are unsure and want to check the power level you are
u

sing, contact the electrical utility company.

Do not overload wall outlets and extension cords.
► This can diminish performance, and could result in electric

shock

or fire.

Use only No.26 AWG

a

a. AWG: American Wire Gauge

or larger, telephone line cord, if

necessary.
► Otherwise, it can cause damage to the machine.

Use the power cord supplied with your machine for safe
operation. If you are using a cord which is longer than 2 meters
(6 fe

et) with a 140V machine, then the gauge should be 16

AWG or larger.
► Otherwise, it can cause damage to

the machine, and could

result in electric shock or fire.

MAINTENANCE / CHECKING

Caution

Unplug this product from the wall outlet before
cleaning the inside of the machine. Do not clean

the
machine with benzene, paint thinner or alcohol; do
not spray water directly into the machine.

► This could result in electric shock or fire.

Keep cleaning supplies away from children.
► Children could get hurt.

Safety information_ 6

SUPPLY USAGE

Caution

Do not disassemble the toner cartridge.
► Toner dust can be dangerous if inhaled or

i

ngested.

When storing supplies such as toner cartridges, keep
them away from children.

► Toner dust can be dangerous if inhaled or
inge

sted.

Do not burn any of the supplies such as toner
cartridge or fuser unit.

► This could cause an explosion or uncontrollable
fi

re.

Using recycled supplies, such as toner, can cause damage to
the machine.

► In case of damage due to the use of recycled supplies, a
service

fee will be charged.

When changing the toner cartridge or removing jammed paper,
be careful not to let toner dust touch your body or clothes.

► Toner dust can be dangerous if inhaled or ingested.

When toner gets on your clothing, do not use hot water to wash
it.

► Hot water sets toner into fabric. Use cold water.

When you are working inside the machine replacing
supplies or cleaning the insi

de, do not operate the

machine.
► You could get injured.

Do not disassemble, repair or rebuild the machine by
yourself.

► It can damage the machine. Call a certified
tech

nician when the machine needs repair.

Keep the power cable and the contact surface of the plug clean
from dust or water.

► Otherwise, this could result in electr

ic shock or fire.

To clean and operate the machine, strictly follow the user's
guide provided with the machine.

► Otherwise, you could damage the machine.

Do not remove any covers or guards that are fastened with
screws.

► The machine should only be repaired by a Samsung service
technician.

Fuser units should only be repaired by a certified service
technician.

► Repair by non-certified technicians could result in fire or
el

ectric shock.

Regulatory information_ 7

regulatory information

This machine is designed for a normal work environment and certified with several regulatory statements.

LASER SAFETY STATEMENT

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and
elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1:1993 + A1:1997 + A2:2001.

Class I laser products are not considered to be

hazardous. The laser system and printer are designed so there is never any human access to

laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition.

• Wavelength: 800 nm

• Beam d

ivergence

- Paraller: 13 deg

rees

- Perp

endicular: 35 degrees

• Ma

ximum power or energy output: 12 mW

WARNING

Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible,
can damage your eyes.

When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons:

OZONE SAFETY

During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is
advisable that the machine be operated in a well ventilated area.
If you need additional information about ozone, contact your local Samsung dealer.

Regulatory information_ 8

POWER SAVE

This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use.
When the printer does not receive data for an extended period of time, power consumption is automatically lowered.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.
For more information on the ENERGY STAR progra

m see http://www.energystar.gov.

RECYCLING

Recycle or dispose of the packaging material for this product in an environmentally responsible manner.

CHINA ONLY

CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the reta

iler where they purchased this product, or their local government office, for details of where and
how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and con

ditions of the purchase contract. This product should not be mixed

with other commercial wastes for disposal.

RADIO FREQUENCY EMISSIONS

FCC Information to the User

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• Thi

s device may not cause harmful interference, and

• This

device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits fo

r a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

Regulatory information_ 9

• Reorient or relocate the receiving antenna.

• Incre

ase the separation between the equipment and receiver.

• Conn

ect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consul

t the dealer or experienced radio TV technician for help.

Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to
operate the equipment.

Canadian Radio Interference Regulations

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.

Cet appareil numérique respecte les limites de bruits radioélectri

ques applicables aux appareils numériques de Classe B prescrites dans la

norme sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.

UNITED STATES OF AMERICA

Federal Communications Commission (FCC)

Intentional emitter per FCC Part 15

Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be
present (embedded) in your printer system. This section is only applicable if these devices are present. Refer to the system label to verify the
presence of wireless devices.

Wireless devices that may be in your system are only qualified for use in the United

States of America if an FCC ID number is on the system

label.
The FCC has set a general guideline of 20 cm (8 inches) separati

on between the device and the body, for use of a wireless device near the
body (this does not include extremities). This device should be used more than 20 cm (8 inches) from the body when wireless devices are on.
The power output of the wireless device (or devices), which may be embedded in your printer, is well below the RF exposure limits as set by
the FCC.

This transmitter must not be collocated or operation

in conjunction with any other antenna or transmitter.

Operation of this device is subject to the following two conditi

ons: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation of the device.

Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to
use it. Contact manufacturer for service.

FCC Statement for Wireless LAN use:

While installing and operating this transmitter and antenna combination the radio frequency exposure limit of 1m W/cm2 may be
exceeded at distances close to the antenna installed. Therefore, the user must maintain a minimum distance of 20cm from the antenna at
all times. This device cannot be colocated with another transmitter and transmitting antenna.

TURKEY ONLY

GERMANY ONLY

Regulatory information_ 10

RUSSIA ONLY

REPLACING THE FITTED PLUG (FOR UK ONLY)

Important

The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the
fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until
you have another fuse cover.

Contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be suitabl

e. However, some buildings (mainly old ones) do not have normal

13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.

If you cut off the moulded plug, get rid of it straight away.

You cannot rewire the plug and you may receive an electric shock if

you plug it into a socket.

Important warning:

You must earth this machine.
The wires in the mains lead have the following color code:

• G

reen and Yellow: Earth

• Blue: Neutral

• Brow

n: Live

If the wires in the mains lead do not match the colors marked in your plug, do the following:
You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or

green.
You must connect the blue wire to the pin which

is marked with the letter “N” or colored black.

You must connect the brown wire to the pin which is marked with th

e letter “L” or colored red.

You must have a 13 amp fuse in the plug,

adaptor, or at the distribution board.

DECLARATION OF CONFORMITY (EUROPEAN COUNTRIES)

Approvals and Certifications

The CE marking applied to this product symbolizes Samsung Electronics Co., Ltd. Declaration of Conformity with the following applicable
93/68/EEC Directives of the European Union as of the dates indicated:

SCX-3200 Series: Low Voltage Directive (2006/95/EC), EMC Directive (2004/108/EC)
SCX-3205W(K): R&TTE Directive (1999/5/EC)

The declaration of conformity may be consulted at www.samsung.com/printer, go to Support > Download center and enter your printer (MFP)
name to browse the EuDoC.

January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of

the member states related to low voltage equipment.

January 1, 1996: Council Directive 2004/108/EC (92/31/EEC), app

roximation of the laws of the Member States related to electromagnetic

compatibility.
March 9, 1999: Council Directive 1999/5/EC on radio equipment and telecommun

ications terminal equipment and the mutual recognition of
their conformity. A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics
Co., Ltd. representative.

Regulatory information_ 11

EC Certification

Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-Europ

ean single terminal connection to the analogue public switched
telephone network (PSTN) in accordance with Directive 1999/5/EC. The product has been designed to work with the national PSTNs and
compatible PBXs of the European countries:

In the event of problems, you should contact the

Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance.

The product has been tested against TBR21. To assist in the use and ap

plication of terminal equipment which complies with this standard, the
European Telecommunication Standards Institute (ETSI) has issued an advisory document (EG 201 121) which contains notes and additional
requirements to ensure network compatibility of TBR21 terminals. The product has been designed against, and is fully compliant with, all of the
relevant advisory notes contained in this document.

European Radio Approval Information (for products fitted with EU-approved radio devices)

Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz band, may be
present (embedded) in your printer system which is intended for home or office use. This section is only applicable if these devices are present.
Refer to the system label to verify the presence of wireless devices.

Wireless devices that may be in your system are only qualified for use in the Europe

an Union or associated areas if a CE mark
with a Notified Body Registration Number and the Alert Symbol is on the system label.
The power output of the wireless device or devices that may be embed

ded in you printer is well below the RF exposure limits as set by the

European Commission through the R&TTE directive.

European States qualified under wireless approvals:

EU
Austria, Belgium, Cyprus, Czech Republic, Den

mark, Estonia, Finland, France (with frequency restrictions), Germany, Greece, Hungary,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, The Netherlands, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden and the U.K.
EEA/EFTA countries
Iceland, Liechtenstein, Norway and Switzerland

European States with restrictions on use:

EU
In France, the frequency range is restricted to 2446.5-2483.5 MHz for

devices above 10 mW transmitting power such as wireless
EEA/EFTA countries
No limitations at this time

REGULATORY COMPLIANCE STATEMENTS

Wireless Guidance

Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be
present (embedded) in your printer system. The following section is a general overview of considerations while operating a wireless device.

Additional limitations, cautions, and concerns for

specific countries are listed in the specific country sections (or country group sections). The
wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If
the country you will be using the wireless device in, is not listed, contact your local Radio Approval agency for requirements. Wireless devices
are closely regulated and use may not be allowed.

The power output of the wireless device or devices that may be emb

edded in your printer is well below the RF exposure limits as known at this
time. Because the wireless devices (which may be embedded into your printer) emit less energy than is allowed in radio frequency safety
standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken
to minimize human contact during normal operation.

As a general guideline, a separation of 20 cm (8 inches) betwe

en the wireless device and the body, for use of a wireless device near the body
(this does not include extremities) is typical. This device should be used more than 20 cm (8 inches) from the body when wireless devices are
on and transmitting.

This transmitter must not be collocated or operation

in conjunction with any other antenna or transmitter.

Some circumstances require restrictions on wireless devices.

Examples of common restrictions are listed below:

Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless
devices to be turned off while traveling in an airplane. IEEE 802.11 (also known as wireless Ethernet) and Bluetooth communication devices
are examples of devices that provide wireless communication.

Regulatory information_ 12

OPENSSL LICENSE

Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or with

out modification, are permitted provided that the following conditions are met:

1. Redi

stributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redi

stributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes

software developed by the OpenSSL Project for use i

n the OpenSSL Toolkit (http://www.openssl.org/)".

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be

used to endorse or promote products derived from this software without

Prior written permission. For written permission, please contact [e-mail].

5. Pro

ducts derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written

permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the

OpenSSL Project for use in the OpenSSL

Toolkit (http://www.openssl.org/)".

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS'' AND A

NY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young (e

[e-mail]). This product includes software written by Tim

Hudson ([e-mail]).

ORIGINAL SSLEAY LICENSE

Copyright (C) 1995-1998 Eric Young ([e-mail]) All rights reserved.
This package is an SSL implementation written by

Eric Young ([e-mail]). The implementation was written so as to conform with

Netscapes SSL.
This library is free for commercial and non-commercial use as lo

ng as the following conditions are adhered to. The following conditions apply to
all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this
distribution is covered by the same copyright terms except that the holder is Tim Hudson ([e-mail]). Copyright remains Eric Young's,
and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given
attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation
(online or textual) provided with the package.

Redistribution and use in source and binary forms, with or with

out modification, are permitted provided that the following conditions are met:

1. Redi

stributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

2. Redi

stributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

In environments where the risk of interference to other devices or

services is harmful or perceived as harmful, the option to use a wireless
device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use
of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices,
ask the applicable authority for authorization prior to use or turning on the wireless device.

Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling
between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of
a wireless device in the destination country.

If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers and shields are
in place and the system is fully assembled.

Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it.
Contact manufacturer for service.

Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact
manufacturer Technical Support for additional information.

Regulatory information_ 13

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes

cryptographic software written by Eric Young ([e-mail])" The word 'cryptographic' can be left out if the routines from the library
being used are not cryptographic related.

4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an

acknowledgement: "This product includes software written by Tim Hudson ([e-mail])".

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply
be copied and put under another distribution licence [including the GNU Public Licence.

Regulatory information_ 14

CHINA ONLY

About this user’s guide_ 15

about this user’s guide

This user’s guide provides information about basic understanding of the machine as well as detailed explanation on each
step during actual usage. It is a valuable resource for both novice and professional users for the proper installation and
use of the machine.

• Read the safety information before using the machine.

• If yo

u have a problem using the machine, refer to the troubleshooting chapter (See "Troubleshooting" on page 77).

• Terms used in

this user’s guide are explained in the glossary chapter (See "Glossary" on page 96).

• Il

lustrations in this user’s guide may differ from your machine depending on its options or models.

• T

he procedures in this user’s guide are mainly based on Windows XP.

CONVENTION

Some terms in this guide are used interchangeably, as below:

• Documen

t is synonymous with original.

• Paper

is synonymous with media, or print media.

• M

achine refers to printer or MFP.

The following table offers the conventions of this guide:

CONVENTION DESCRIPTION EXAMPLE

Bold For texts on the display or button names on the machine. Power

Note Provides additional information or details for the machine function and feature.

The date format may differ from country
to country.

Caution Contains information you can use to protect the machine from possible

mechanical damage or malfunction.

Do not touch the surface of the drum
located in the toner cartridge or imaging
unit.

Footnote Provides additional information on certain words or a phrases. a. pages per minute

(“Cross-reference”) Refers you to additional detailed information. (See "Finding more information" on

page 16).

About this user’s guide_ 16

FINDING MORE INFORMATION

You can find information about setting up and using your machine in the following resources, either as a print-out or on screen.

MATERIAL NAME DESCRIPTION

Quick Installation
Guide

This guide provides information on setting up your machine. This guide is provided in the box with the printer.

User’s Guide

This guide provides you with step-by-step instructions for using your machine’s full features, maintaining your machine,
troubleshooting, and replacing supplies.

Machine Driver Help This help provides you with information about the printer driver and instructions for setting up the options for printing (See "Using help"

on page 56).

Samsung website If you have Internet access, you can get help, support, machine drive

rs, manuals, and order information from the Samsung website,

www.samsung.com/printer.

Downloadable
so

ftware

You can download useful software programs from the Samsung website.

• Sa

msung AnyWeb Print: helps personal users to screen-capture the website screen in Windows Internet Explorer easily.

(http://solution.samsungprinte

r.com/personal/anywebprint)

• SyncThru™ Web Admin Service: provides convenient tools for network administrators who nee

d to manage many machines

simultaneously. This program is for network model o

nly. (http://solution.samsungprinter.com, See "Features by Models" on

page 18)

Features of your new product_ 17

features of your new product

Your new machine is equipped with a number of special features that improve the quality of the documents you print.

SPECIAL FEATURES

Print with excellent quality and speed

• You can print with a resolution of up to 1200 x 1200 dpi

effective output.

• Your machin

e prints A4-sized paper at up to 16 ppm and

letter-sized paper at up to 17 ppm.

Handle many different types of printable material

• The 150-sheet tray supports plain paper in various sizes,

letterhead, envelopes, labels, custom-sized media,
postcards, and heavy paper.

Create professional documents

• Print Watermarks. You can customize your documents with

words, such as “Confidential” (See "Using watermarks" on
page 57).

• Print Po

sters. The text and pictures of each page of your
document are magnified and printed across the sheet of
paper and can then be taped together to form a poster (See
"Printing posters" on page 56).

• You can use

preprinted forms and letterhead with plain

paper (See "Using overlays" on page 58).

Save time and money

• To save paper, you can print multiple pages on one single

sheet of paper (See "Printing multiple pages on one sheet of
paper" on page 56).

• Th

is machine automatically conserves electricity by

substantially reducing power consumption when not in use.

• To

save paper, you can print on both sides of the paper
manually (See "Printing on both sides of the paper (Manual)"
on page 56).

Print in various environments

• You can print with various operating systems such as

Windows, Linux, and Macintosh OS systems.

• Your

machine is equipped with a Hi-Speed USB 2.0

interface.

• Your machin

e comes with a built-in network interface,

Ethernet 10/100 BaseTX. SCX-3205W(K) only)

• Your machine comes with a built-in network interface 802.11

b/g/n wireless LAN. (SCX-3205W(K) only) For some
counties, only 802.11 b/g can be applied.

Copy the original in high quality

• You can copy the original and print them in enhanced image

quality and size.

Scan the originals

• Scan in color and use the precise compressions of BMP,

JPEG, TIFF and PDF formats.

• Use one

button to scan your original to the connected

computer.

Eco Print

• You can reduce toner and paper usage (See "Eco Print

button" on page 22).

IPv6 (SCX-3205W(K) only)

• Th

e machine supports IPv6 (See "IPv6 Configuration" on

page 34).

AirPrint

AirPrint allows you to wirelessly print directly from iPhone, iPad
and iPod touch running iOS 4.2 or later.

Features of your new product_ 18

FEATURES BY MODELS

The machine is designed to support all of your document needs from printing to more advanced networking solutions for your business.
Features by models include:

FEATURES SCX-3200 SERIES SCX-3205W(K) SERIES

Print ● ●

Eco Print ● ●

Duplex (2-sided) printing (manual) ● ●

Copy ● ●

Scan ● ●

Hi-Speed USB 2.0 ● ●

Print Screen ●

IPv6 ●

Network Interface Ethernet 10/100 Base TX wired LAN ●

Network Interface 802.11b/g/n wireless LAN

a

a.Depending on your country, wireless LAN card may not be available. For some counties, only 802.11 b/g can be

applied. Contact your local Samsung dealer or the retailer where you bought your machine.

●

SyncThru™ Web Service ●

(●: Included, Blank: Not included)

Introduction_ 19

1.introduction

This chapter gives you an overview of your machine:

This chapter includes:

• Machine overview

• Control panel overview

• Understanding the status LED

• Introducing the useful buttons

MACHINE OVERVIEW

Front view

3

6

1

10

11

12

9

7

8

5

4

2

13

14

This illustration may differ from your machine depending on its model.

1

Scanner lid

6

Front door

11

Inner cover

2

Scanner glass

7

Tray

12

Toner cartridge

3

Control panel

8

Paper length guide

13

Toner cartridge handle

4

Output tray (face down)

9

Paper width guide

14

Toner cartridge drum

5

Output support

10

Scan unit

Introduction_ 20

Rear view

2 31

This illustration may differ from your machine depending on its model.

1

USB port

2

Power cord receptacle

3

Network port

a

a.SCX-3205W(K) only

Introduction_ 21

CONTROL PANEL OVERVIEW

This control panel may differ from your machine depending on its model.

11 9 10 112 3 4 5 6 7 8

1213

1

Power ( )

Allows you to turn the powe

r on or off (See "Power button" on page 23).

2

Eco Print Turn the Eco mode on or off (See "Eco Print button" on page 22).

3

Scan to Sends scanned data (See "Scanning originals and sending to your computer (Scan to PC)" on page 64).

4

ID Copy Allows you to copy both sides the ID card like a driver’s license to a single side of paper (See "ID card copying" on page 63).

5

Front LED

When the LED lights on, place the front side of an ID card facing down on the scanner glass (See "ID card copying" on
page 63).

6

Back LED

When the LED lights on, place the back side of an ID card facing down on the scanner glass (See "ID card copying" on
page 63).

7

Display Shows the number of pages you want to copy.

8

+/- Buttons Allows you to increase/decrease the number of page you want to copy (See "+/- buttons" on page 22).

9

Print Screen (SCX-3200
only)

Prints the displayed screen of your monitor (See "Print Screen button (SCX-3200 only)" on page 22).

WPS (SCX-3205W(K)
on

ly)

Allows you to turn on or off the wireless network connection (See "WPS button (SCX-3205W(K))" on page 22).

10

Stop/Clear ( )

Stops an operation at any time and there are more functions (See "Stop/Clear button" on page 23).

11

Start ( )

Begins a printing, copying or scanning job depending on which function you are using.

12

Wireless LED
(SCX-3205W(K) only)

Shows the current status of the wirele

ss network connection (See "Understanding the status LED" on page 22).

13

Status LED Shows the status of your machine (See "Understanding the status LED" on page 22).

Introduction_ 22

UNDERSTANDING THE STATUS LED

Status LED

The color of the LED indicates the machine's current status.

STATUS LED DESCRIPTION

Off • The machine is off-line.

• T

he machine is in sleep mode.

Green On • The machine is in ready mode or warming up.

Blinking • When the LED blinks slowly, the machine is

receiving data from the computer or printing
documents.

• W

hen the LED blinks rapidly, the machine is

operating special functions.

Red On • T

he inner cover is opened. Close the inner

cover completely.

• T

here is no paper in the tray. Load paper in the

tray.

• T

he machine has stopped due to a major error.

• Your

system has some problems. If this
problem occurs, contact a service
representative.

• A tone

r cartridge has almost reached its

estimated cartridge life

a

a.Estimated cartridge life means the expected or estimated toner

cartridge life, which indicates the average capacity of print-outs and is
designed pursuant to ISO/IEC 19752. The number of pages may be
affected by

operating environment, percentage of image area, printing
interval, media type, and media size. Some amount of toner may
remain in the cartridge even when red LED is on and the printer stops
printing.

. It is recommended to
replace the toner cartridge (See "Replacing the
toner cartridge" on page 89).

Blinking • A small amou

nt of toner is left in the cartridge.

The estimated cartridge life

a

of toner is close.
Prepare a new cartridge for replacement. You
ma

y temporarily increase the printing quality by
redistributing the toner (See "Redistributing
toner" on page 77).

• T

he machine is printing in manual feed mode or

in manual duplex mode.

Orange On A paper jam has occurred (See "Clearing paper

jams" on page 78).

Samsung does not recommend using a non-genuine Samsung toner
cartridge such as one that is refilled or remanufactured. Samsung
cannot guarantee a non-genuine Samsung toner cartridge's quality.
Service or repair required as a result of using non-genuine Samsung
toner cartridges will not be covered under the machine warranty.

All printing errors will appear in the Smart Panel program window. If
the problem persists, contact a service representative.

Wireless LED (SCX-3205W(K) only)

WIRELESS LED STATUS DESCRIPTION

Blue

Off (

)

Wireless network is disconnected.

On (

)

Wireless network is connected.

Slowly blinks
(

)

The machine starts connecting to a
wire

less network.

Fast blinks
(

)

• Th

e machine is connecting to

access point (or wireless router).

• Wi

reless network connection is

being disconnected.

INTRODUCING THE USEFUL BUTTONS

Print Screen button (SCX-3200 only)

If you press Print Screen button for less than two seconds, the green light
blinks fast on the Status LED, and then the machine prints the whole
screen displayed in the monitor.

If you press Print Screen

button for more than two seconds, the Status

LED lights on green, and then the machine prints an active screen
displayed in the monitor.

• The page will be printed on the default page like A4 or Letter.

• Print Screen

can only be used in the Windows and Macintosh

operating systems.

• You can only use this function with a USB-connected machine.

• Yo

u can use this function only when the Smart Panel program is

installed and running.

• Yo

u can only use this function in Eco Print mode off.

Eco Print button

You can turn the Eco Print mode on or off by simply pressing the button. If
you set the Eco Print mode on, the machine automatically sets the 2-UP
and Toner Save option on and print with those options.

1. Pres

s Eco Print button on the control panel.

2. Eco Print LED ligh

ts on. Then, Eco Print mode is on.

To turn off Eco Print mode, press Eco Print bu

tton one more time.

+/- buttons

You can determine the number of copies (up to 99 copies) you want to copy
by pressing +/- buttons. The default setting value is 1.

• If you press +/- buttons briefly, the number of copies

increases/decreases by single digits.

• If yo

u press +/- buttons long, the number of copies increases/decreases

by ten-fold.

WPS button (SCX-3205W(K))

This feature automatically detects which WPS (Wi-Fi Protected Setup™)
mode your access point uses. By pushing a button on the wireless LAN
router/access point and the machine, you can setup the wireless network
and security settings (See "Wireless network setup (SCX-3205W(K))" on
page 36).

Introduction_ 23

Stop/Clear button

By pressing Stop/Clear button, you can do the following functions.

FUNCTION DESCRIPTION

Printing a configuration
report

In ready mode, press and hold this button
long enough (about two seconds) until the
Status LED blinks slowly, and release the
button (See "To print a configuration report"
on page 24).

Printing a network
c

onfiguration report

(SCX-3205W(K) only)

In ready mode, press and hold this button for
fo

ur seconds until the Status LED blinks fast,

and release the button (See "Printing a
network configuration report" on page 30).

Supplies information
repor

t

In the ready mode, press and hold this button
for about 6 seconds until the Status LED is
on, and release (See "To print a supplies
information report" on page 24).

Canceling print job

Press

Stop/Clear button during a

operation. The print job is cleared from both
th

e machine and the computer and then the
machine returns to ready mode. This may
take some time depending on the size of the
print job.

Power button

By pressing Power button, you can turn the machine on or off.

Turning on the machine

1. Plug in the power cord.

2. Pr

ess Power button on the control panel.

When the machine is powered on, you can see LED looping on the
displ

ay. Then, the machine is in ready mode.

If you want to turn the power off, press and hold this button for
about two seconds.

Getting started_ 24

2.getting started

This chapter gives you step-by-step instructions for setting up the USB connected machine and software.

This chapter includes:

• Setting up the hardware

• Printing a report

• Supplied software

• System requirements

• Installing USB connected machine’s driver

• Sharing your machine locally

SETTING UP THE HARDWARE

This section shows the steps to set up the hardware, as is explained in the
Quick Installation Guide. Make sure you read the Quick Installation Guide
first and follow the steps below:

Location

1. Select a stable location.

Select a level, stable place with adequate sp

ace for air circulation. Allow

extra space for opening cover(s) and tray(s).
The area should be well ventilated and away from direct sunlight or

sources of

heat, cold, and humidity. Do not set the machine close to the

edge of your desk or table.

Printing is suitable for altitudes under 1,000 m (3,281 ft). Refer to the
altitude setting to optimize your printing (See "Altitude adjustment" on
page 46).

Place the machine on a flat, stable surface so th

at there is no incline
greater than 2 mm (0.08 inch). Otherwise, printing quality may be
affected.

2mm
(0.08 in)

2mm
(0.08 in)

2. Unpack the machine and check all the enclosed items.

3. Remove tape

holding the machine securely.

4. In

stall the toner cartridge.

5. Loa

d paper (See "Loading originals" on page 48).

6. Make

sure that all cables are connected to the machine.

7. T

urn the machine on (See "Turning on the machine" on page 23).

This machine will not operate when the power main fails.

PRINTING A REPORT

Print a configuration or supplies information page to make sure that the
machine is operating properly.

To print a configuration report

In the ready mode, press and hold Stop/Clear button on the control
panel for long enough (about two seconds) until the Status LED blinks
slowly, and release.

For SCX-3205W(K), you can print a network configuration report (See
"Printing a network configuration report" on page 30).

To print a supplies information report

In the ready mode, press and hold Stop/Clear button on the control
panel for about six seconds until the Status LED lights on, and release.

SUPPLIED SOFTWARE

After you have set up your machine and connected it to your computer, you
must install the printer software. If you

are a Windows or Macintosh OS
user, install the software from the supplied CD and if you are a Linux OS
user, download the software from the Samsung website
(www.samsung.com/printer) and install.

Machine software is occasionally updated for reasons like the release
of new operating system

and etc. If needed, download the latest

version from the Samsung website (w

ww.samsung.com/printer).

OS CONTENTS

Windows • Printer driver: Use this driver to take full advantage of

your machine’s features.

• Scanner driver: TWAIN and Windows Image

Acquisition (WIA) drivers are available for scanning
documents on your machine.

• Smart Panel

: This program allows you to monitor the

machine’s status and alerts you when an error occurs
during printing (See "Using the Smart Panel program" on
page 70).

• SmarThru

a

:

a.Allows you to edit a scanned image in various ways using a powerful

imag

e editor and to send the image by email. You can also open
another image editor program such as Adobe Photoshop, from
SmarThru. For details, refer to the on-screen help supplied on the
SmarThru program (See "SmarThru" on page 70).

This program is the accompanying

W

indows-based software for your multifunctional

machine.

• Sa

msung Scan and Fax Manager: You can find out

about Samsung Scan and Fax Manager program
information and installed scan driver's condition.

• Printer Settings

Utility: This program allows you to set

up printer’s other options from your computer.

• SetIP

: Use this program to set your machine’s TCP/IP

addresses. (SCX-3205W(K) only)

Macintosh • Printer Driver

: Use this driver to take full advantage of

your machine’s features.

• Sc

anner driver: TWAIN driver is available for scanning

documents on your machine.

• Smart Panel

: This program allows you to monitor the

machine’s status and alerts you when an error occurs
during printing (See "Using the Smart Panel program" on
page 70).

• Sa

msung Scan and Fax Manager: You can find out

about Samsung Scan and Fax Manager program
information and installed scan driver's condition.

• Printer Settings

Utility: This program allows you to set

up printer’s other options from your computer.

• SetIP

: Use this program to set your machine’s TCP/IP

addresses. (SCX-3205W(K) only)

Linux • U

nified Linux Driver: Use this driver to take full

advantage of your machine’s features.

• SANE

: Use this driver to scan documents.

• Smart Panel

: This program allows you to monitor the

machine’s status and alerts you when an error occurs
during printing (See "Using the Smart Panel program" on
page 70).

• Printer Settings

Utility: This program allows you to set

up printer’s other options from your computer.

• SetIP

: Use this program to set your machine’s TCP/IP

addresses. (SCX-3205W(K) only)

Getting started_ 25

SYSTEM REQUIREMENTS

Before you begin, ensure that your system meets the following
requirements:

Windows

Your machine supports the following Windows operating systems.

OPERATING

SYSTEM

REQUIREMENT (RECOMMENDED)

CPU RAM

FREE

HDD

SPACE

Windows®
2000

Intel® Pentium® II 400
MHz (Pentium III 933
MHz)

64 MB
(128 MB)

600 MB

Windows® XP Intel® Pentium® III 933

MHz (Pentium IV 1 GHz)

128 MB
(256 MB)

1.5 GB

Windows
Se

rver® 2003

Intel® Pentium® III 933
MHz (Pentium IV 1 GHz)

128 MB
(512 MB)

1.25 GB to
2 GB

Windows
Se

rver® 2008

Intel® Pentium® IV 1 GHz
(Pentium IV 2 GHz)

512 MB
(2 GB)

10 GB

Windows
Vista®

Intel® Pentium® IV 3 GHz 512 MB

(1 GB)

15 GB

Windows® 7 Intel® Pentium® IV 1 GHz

32-bi

t or 64-bit processor

or higher

1 GB
(2 GB)

16 GB

• Support for DirectX® 9 graphics with 128 MB

memory (to enable the Aero theme).

• DVD-R/W Drive

Windows
Se

rver® 2008

R2

Intel® Pentium® IV 1 GHz
(x86)

or 1.4 GHz (x64)
processors (2 GHz or
faster)

512 MB
(2 GB)

10 GB

• Internet Explorer® 5.0 or higher is the minimum requirement for all

Windows operating systems.

• Windows Terminal Services is compatible with your machine.

Macintosh

OPERATING

SYSTEM

REQUIREMENTS (RECOMMENDED)

CPU RAM

FREE

HDD

SPACE

Mac OS X

10.3 ~ 10.4

• Int

el®

Processors

• PowerPC G4/ G5

• 128 MB for a

PowerPC based
Mac (512 MB)

• 512

MB for a
Intel-based Mac
(1 GB)

1 GB

Getting started_ 26

Linux

ITEM REQUIREMENTS

Operating
system

RedHat® Enterprise Linux WS 4, 5 (32/64 bit)
Fedora 4, 5, 6, 7, 8, 9, 10, 11, 12 (32/64 bit)
SuSE Linux 10.0, 10.1 (32 bit)

OpenSuSE® 10.2, 10.3, 11.0, 11.1, 11.2 (32.64 bit)
Mandriva 2005, 2006, 2007, 2008, 2009, 2009.1
(32/64 bit)
Ubuntu 5.04, 5.10, 6.06, 6.1

0, 7.04, 7.10, 8.04, 8.10,

9.04, 9.10 (32/64 bit)
SuSE Linux Enterprise Desktop 10, 11 (32/64 bit)
Debian 4.0, 5.0 (32/64 bit)

CPU Pentium IV 2.4 GHz (Intel Core™2)

RAM 512 MB (1 GB)

Free HDD space 1 GB (2 GB)

INSTALLING USB CONNECTED MACHINE’S
DRIVER

A locally connected machine is a machine directly connected to your
computer by a USB cable.

Only use a USB cable no longer than 3 m (10 ft.).

Windows

You can install the machine software using the typical or custom method.
The following steps are recommended for most users who use a machine

d

irectly connected to your computer. All components necessary for machine

operations will be installed.

1. Ma

ke sure that the machine is connected to the computer and powered

on.

If the “Found New Hardware Wizard” window appears during the
installation procedure, click Cancel to close the window.

2. Insert the supplied software CD into your CD-ROM drive.

• Th

e software CD should automatically run and an installation window

will appear.

• If the in

stallation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing “X” with the letter which represents
your CD-ROM Drive. Click OK.

• If you use Wi

ndows Vista, Windows 7 or Windows 2008 Server R2

click Start > All programs > Accessories > Run.

Type X:\Setup.exe replacing “X” with the letter which represents
your CD-ROM Drive and click OK.

• If the AutoPlay window appears in Windows Vista, Windows 7 or

Windows 2008 Server R2, click Run Setup.exe in Install or run

program field, and click Continue or Yes in the User Account
Control window.

3. Select In

stall now.

If necessary, select a language from the drop-down list.

• For SCX-3205W(K), you can access the Wireless Setting and

Installation menu. The menu allows you to install a wireless
network to connect to the machine with an USB cable (See
"Wireless network setup (SCX-3205W(K))" on page 36).

• The

Advanced Installation has two options, Custom

Installation and Install Software Only. The Custom
Installation allows you to select the machine’s connection and
choose individual component to install. The Install Software
Only allows you to install the supplied software, such as Smart

Panel. Follow the instruction on the window.

4. R

ead the License Agreement, and select I accept the terms of the

License Agreement. Then, click Next.

The software searches for the machine.

If your machine is not connected to the computer, the following

Mac OS X

10.5

• Intel®

Processors

• 86

7 MHz or
faster Power PC
G4/ G5

512 MB (1 GB) 1 GB

Mac OS X

10.6

• Intel®

Processors

1 GB (2 GB) 1 GB

OPERATING

SYSTEM

REQUIREMENTS (RECOMMENDED)

CPU RAM

FREE

HDD

SPACE

Getting started_ 27

window will appear.

• After connecting the machine, click Next.

• Ch

eck if you want to install the software without

connection of the printer.

- Ch

eck this option to install the software without a machine
connected. In this case, the print a test page window will be
skipped, and completes the installation.

• Sear

ch again

When you press this button,

the firewall notice window

appears.

- T

urn off the firewall and Search again. For Windows
operating system, click Start > Control Panel > Windows
Firewall, and inactivate this option.

- T

urn off the firewall from the third party's program beside
the operating system. Refer to the manual provided by
individual programs.

• Direct

Input

The Dir

ect Input allows you to search a specific machine on

the network.

- Search by IP address: Enter the IP address or the host

name. Then click Next.
To verify your machine’s IP address, print a network

co

nfiguration report (See "Printing a network configuration

report" on page 30).

- Se

arch by network path: To find a shared machine (UNC

Path), enter the shared name manually or find a shared
printer by clicking the Browse button. Then click Next.

• Help

- T

his help button gives you the detailed information about

how to connect the machine.

5. The searched machines will be shown on the screen. Select the one you
wish to use and click Next.

If the software searched only one machine, the confirmation
window appears.

6. After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click Print a test page.

Otherwise, just click Next an

d skip to step 8.

7. If

the test page prints out correctly, click Yes.

If not, click No

to reprint it.

8. If you wa

nt to register your machine on Samsung web site, click On-line

Registration.

If your machine is not connected yet to the network or computer,
click How to connect?. How to connect? gives detailed
information about how to connect the machine. Follow the
instructions in the window.

9. Click Finish.

If the printer driver does not work properly, follow the steps below to
repair or reinstall the driver.

a) Make

sure that the machine is connected to your machine and

powered on.

b) Fro

m the Start menu, select Programs or All Programs >

Samsung Printers > your printer driver name > Uninstall.

c) Select the option you wish to execute, then follow the instruction

on the window.

Macintosh

1. Make sure that the machine is connected to your computer and powered

on.

2. Inse

rt the supplied software CD into your CD-ROM drive.

3. D

ouble-click the CD-ROM icon that appears on your Macintosh desktop.

4. D

ouble-click the MAC_Installer folder.

5. D

ouble-click the Installer OS X icon.

6. En

ter the password and click OK.

7. T

he Samsung Installer window opens. Click Continue.

8. R

ead the license agreement and click Continue.

9. Click Agre

e to agree to the license agreement.

10. Select Ea

sy Install and click Install. Easy Install is recommended for

most users. All components necessary for machine operations will be
installed.

If you select C

ustom Install, you can choose individual components to

install.

11. When

the message which warns that all applications will close on your

computer appears, click Continue.

12. Select Typi

cal installation for a network printer for a network printer

and then click OK.

13. After the installation is finished, click Restart.

14. Open the Appl

ications folder > Utilities > Print Setup Utility.

• For Mac OS X

10.5 ~ 10.6, open the Applications folder > System

Preferences and click Print & Fax.

15. Click Add o

n the Printer List.

• For Mac OS X

10.5 ~ 10.6, click the “+” icon; a display window will

pop up.

16. F

or Mac OS X 10.3, select the USB tab.

• For Mac OS X10.4,

click Default Browser and find the USB

connection.

• For Mac OS X 10.5 ~ 10.6, click Default and find the USB

connection.

17. F

or Mac OS X 10.3, if Auto Select does not work properly, select

Samsung in Printer Model and your machine name in Model Name.

• For Mac OS X

10.4, if Auto Select does not work properly, select

Samsung in Print Using and your machine name in Model.

• For Mac OS X

10.5 ~ 10.6, if Auto Select does not work properly,

select Select a driver to use... and your machine name in Print
Using.

Your machine appears on the Printer List,

and is set as the default

machine.

18. Click Add.

Getting started_ 28

If the printer driver does not work properly, uninstall the driver and
reinstall it.

Follow steps below to uninstall the driver for Macintosh.

a) Ma

ke sure that the machine is connected to your computer and

powered on.

b) In

sert the supplied software CD into your CD-ROM drive.

c) Doub

le-click CD-ROM icon that appears on your Macintosh

desktop.

d) Doub

le-click the MAC_Installer folder.

e) Doub

le-click the Installer OS X icon.

f) Ente

r the password and click OK.

g) The

Samsung Installer window opens. Click Continue.

h) Read

the license agreement and click Continue.

i) Click Agr

ee to agree to the license agreement.

j) Select Unins

tall and click Uninstall.

k) Whe

n the message which warns that all applications will close on

your computer appears, Click Continue.

l) Whe

n the uninstall is done, click Quit.

Linux

You need to download Linux software packages from the Samsung website
to install the printer software.

Follow the steps below to install the software.

Installing the Unified Linux Driver

1. Make sure that the machine is connected to your computer and

powered on.

2. When the Administrator Login window appears, type in root in the

Login field and enter the system password.

You must log in as a super user (root) to install the machine
software. If you are not a super user, ask your system
administrator.

3. Fro

m the Samsung website, download the Unified Linux Driver

package to your computer.

4. Right-click the Unified Linux Driver package and extract the

package.

5. Dou

ble-click cdroot > autorun.

6. Wh

en the welcome screen appears, click Next.

7. When the installation is complete, click Finish.
The installation program added the Uni

fied Driver Configurator desktop
icon and the Unified Driver group to the system menu for your
convenience. If you have any difficulties, consult the on screen help that
is available through your system menu or from the driver package
Windows applications, such as Unified Driver Configurator.

Installing the Smart Panel

1. Make sure that the machine is connected to your computer and

powered on.

2. W

hen the Administrator Login window appears, type in root in the

Login field and enter the system password.

You must log in as a super user (root) to install the machine
software. If you are not a super user, ask your system
administrator.

3. From th

e Samsung website, download the Smart Panel package to

your computer.

4. Righ

t-click the Smart Panel package and extract the package.

5. Doub

le-click cdroot > Linux > smartpanel > install.sh.

Installing the Printer Settings Utility

1. Make sure that the machine is connected to your computer and

powered on.

2. W

hen the Administrator Login window appears, type in root in the

Login field and enter the system password.

You must log in as a super user (root) to install the machine
software. If you are not a super user, ask your system
administrator.

3. From th

e Samsung website, download the Printer Settings Utility

package to your computer.

4. Right-click the Printer Settings Utility package and extract the

package.

5. Doub

le-click cdroot > Linux > psu > install.sh.

If the printer driver does not work properly, uninstall the driver and
reinstall it.

Follow the steps below steps to uninstall the driver for Linux.

a) Ma

ke sure that the machine is connected to your computer and

powered on.

b) W

hen the Administrator Login window appears, type in “root”

in the Login field and enter the system password.
You must log in as a super user (root) to uninstall the printer

driver. If you are

not a super user, ask your system

administrator.

c) Click the icon

at the bottom of the desktop. When the Terminal

screen appears, type in:
[root@localhost root]#cd /opt/Sa

msung/mfp/uninstall/

[root@localhost uninstall]#./uninstall.sh

d) Click Unin

stall.

e) Click Next.
f) Click Fi

nish.

Getting started_ 29

SHARING YOUR MACHINE LOCALLY

Follow the steps below to set up computers to share your machine locally.
If the Host computer is directly connected to the machine by a USB cable

and is also connected to the local network environment, the client computer
connected to the local network can use the shared machine through the
host computer to print.

2

1

1

Host computer A computer which is directly connected to

the machine by USB cable.

2

Client computers Computers which use the machine shared

through the host computer.

Windows

Setting up a host computer

1. Install your printer driver (See "Installing USB connected machine’s

driver" on page 26).

2. Cli

ck the Windows Start menu.

3. Fo

r Windows 2000, select Settings > Printers.

• F

or Windows XP/Server 2003, select Printers and Faxes.

• F

or Windows Server 2008/Vista, select Control Panel >

Hardware and Sound > Printers.

• For Windows 7, select Co

ntrol Panel > Hardware and Sound >

Devices and Printers.

• For Windows Server 2008 R2, select Control Panel > Hardware

> Devices and Printers.

4. Rig

ht-click the printer icon.

5. Fo

r Windows XP/Vista/Server 2003/Server 2008, press Properties.

For Windows 7/Windows Server 2008 R2, from context menus,
select the Printer p

roperties.

If Printer properties item has a ► mark, you can select other
printer drivers connected with the selected printer.

6. Select the Sharing tab.

If you are a Windows 7/Windows Server 2008 R2 user, check
the Change Sharing Options.

7. Check the Share this printer checkbox.

8. Fi

ll in the Share Name field. Click OK.

Setting up a client computer

1. Install your printer driver (See "Installing USB connected machine’s

driver" on page 26).

2. Click the Windows Start menu.

3. Select Al

l programs > Accessories > Windows Explorer.

4. Enter the

IP address of the host computer in the address bar and

press Enter in your keyboard.

In case host computer requires a User name and Password,
fill in User ID and password of the host computer account.

5. Right-click the printer icon you want to share and select Connect.

6. If a se

t up complete message appears, click OK.

7. Ope

n the file you want to print and start printing.

Macintosh

The following steps are for Mac OS X 10.5~10.6. Refer to Mac Help
for other OS versions.

Setting up a host computer

1. Install your printer driver (See "Macintosh" on page 27).

2. Ope

n the Applications folder > System Preferences and click

Print & Fax.

3. Select

the printer to share in the Printers list.

4. Select Sh

are this printer.

Setting up a client computer

1. Install your printer driver (See "Macintosh" on page 27).

2. Ope

n the Applications folder > System Preferences and click

Print & Fax.

3. Click the “+” icon.

A display window showing the name of your shared printer appears.

4. Select y

our machine and click Add.

Network setup (SCX-3205W(K) only)_ 30

3.network setup (scx-3205w(k) only)

This chapter gives you step-by-step instructions for setting up the network connected machine and software.

This chapter includes:

• Network environment

• Introducing useful network programs

• Using a wired network

• Installing network connected machine’s driver

• IPv6 Configuration

NETWORK ENVIRONMENT

You need to set up the network protocols on the machine to use it as your
network machine. You can set up the basic network settings through the
network setting programs.

The following table shows the network en

vironments supported by the

machine.

ITEM REQUIREMENTS

Network interface • Ethernet 10/100 Base-TX

• 802.11

b/g/n Wireless LAN

a

a.Depending on your country, wireless LAN card may not be available.

For some counties, only 802.11 b/g can be applied. Contact your local
Samsung dealer or the retailer where you bought your machine.

Network operating system • Win

dows 2000/Server 2003 /Server

2008/XP/Vista/7/Server 2008 R2

• Variou

s Linux OS

• Ma

c OS X 10.3 ~ 10.6

Network protocols • TCP/IPv4

• DHCP, BOOTP

• DNS, WINS, Bo

njour, SLP, UPnP

• Stan

dard TCP/IP Printing (RAW), LPR,

IPP

• SNMPv 1/2/3, HTTP

• TCP/IPv6

(DHCP, DNS, RAW, LPR,

SNMPv 1/2/3, HTTP)
(See "IPv6 Configuration" on page 34.)

Wireless security • Auth

entication: Open System, Shared
Key, WPA Personal, WPA2 Personal
(PSK)

• Encryp

tion: WEP64, WEP128, TKIP,

AES

INTRODUCING USEFUL NETWORK PROGRAMS

There are several programs available to setup the network settings easily in
network environment. For the network administrator especially, managing
several machines on the network is possible.

Before using the programs below, set the IP address first.

SyncThru™ Web Service

Web server embedded on your network machine, which allows you to do
the following tasks.

• You can configure the network parameters necessary for the machine to

connect to various network environments.

• You c

an customize machine settings

(See "Using SyncThru™ Web Service (SCX-3205W(K) only)" on
page 69).

SyncThru™ Web Admin Service

Web-based machine management solution for network administrator.
SyncThru™ Web Admin Service provides you with an efficient way of

man

aging network devices and lets you remotely monitor and troubleshoot

network machines from any site with corporate internet access.

• D

ownload this program from http://solution.samsungprinter.com.

SetIP

This utility program allows you to select a network interface and manually
configure the IP addresses for use with the TCP/IP protocol.

• See "IPv4 setting using SetIP Program (Windows)" on page 31.

• See "IPv4 setting using SetIP Program (Macintosh)" on page 31.

• See "IPv4 setting using SetIP Program (Linux)" on page 32.

TCP/IPv6 is not supported by this program.

USING A WIRED NETWORK

You must set up the network protocols on your machine to use it on your
network. This chapter will show you how this is easily accomplished.

You can use network after connecting network cable to a corresponding
port on your machine.

Printing a network configuration report

You can print a network configuration report from the machine’s control
panel that will show the current machine’s network settings. This will help
you to set up a network and troubleshoot problems.