Samsung SCV-5085 User Manual

High Resolution WDR
Vandal-Resistant Dome Camera

User Manual

SCV-5085

High Resolution WDR Vandal-Resistant Dome Camera

User Manual

Copyright
©2014 Samsung Techwin Co., Ltd. All rights reserved.

Trademark

is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.

Restriction

Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document
shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.

Disclaimer

Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but
no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on
the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document
without prior notice.

Warranty

If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve
the problem for free of charge. The warranty period is 3 years. However, the followings are excluded:

•If the system behaves abnormally because you run a program irrelevant to the system operation.

•Deteriorated performance or natural worn-out in process of time

 Design and specifications are subject to change without prior notice.

Before operating the camera, confirm the camera model and correct input power voltage. To
help you understand this manual thoroughly, we'll introduce our model description.

■ SCV-5085 SERIES

• NTSC MODEL • PAL MODEL
SCV-5085N SCV-5085P

■ MODEL DESCRIPTION

• SCV-5085X

_

 •SIGNAL SYSTEM

N → NTSC MODEL
P → PAL MODEL

SIGNAL SYSTEM

4_ safety information

safety information

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of electric

shock is present within this unit.

This exclamation point symbol is intended to alert the user to the presence

of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING

• To prevent damage which may result in fire or electric shock hazard, do not expose this
appliance to rain or moisture.

• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with
the installation instructions.

WARNING

1. Be sure to use only the standard adapter that is specified in the specification sheet.

Using any other adapter could cause fire, electrical shock, or damage to the product.

2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire,

electric shock, or damage to the product.

3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause

abnormal heat generation or fire.

4. Securely plug the power cord into the power receptacle. insecure connection may cause

fire.

5. When installing the camera, fasten it securely and firmly. The fall of camera may cause

personal injury.

English_5

● safety information

6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers

filled with water on top of the camera. Doing so may cause personal injury due to fire, electric
shock, or falling objects.

7. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric

shock.

8. If any unusual smells or smoke come from the unit, stop using the product. in such case,

immediately disconnect the power source and contact the service center. Continued use in
such a condition may cause fire or electric shock.

9. If this product fails to operate normally, contact the nearest service center. never

disassemble or modify this product in any way. (samsung is not liable for problems caused
by unauthorized modifications or attempted repair.)

10. When cleaning, do not spray water directly onto parts of the product. Doing so may

cause fire or electric shock.

CAUTION

1. Do not drop objects on the product or apply strong shock to it. Keep away from a location

subject to excessive vibrationor magnetic interference.

2. Do not install in a location subject to high temperature (over 55°C), low temperature (below

-30°C), or high humidity. Doing so may cause fire or electric shock.

3. If you want to relocate the already installed product, be sure to turn off the power and then

move or reinstall it.

4. Remove the power plug from the outlet when then there is a lightning. Neglecting to do so

may cause fire or damage to the product.

5. Keep out of direct sunlight and heat radiation sources. It may cause fire.

6. Install it in a place with good ventilation.

7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may

damage the CMOS image sensor.

8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

such as vases, shall be placed on the apparatus.

9. The Mains plug is used as a disconnect device and shall stay readily operable at any time.

10. Do not expose the camera to radioactivity. Radioactivity exposure may damage the

CMOS.

6_ safety information

safety information

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions :

1) This device may not cause harmful interference, and

2) This device must accept any interference received including interference that may cause
undesired operation.

CAUTION

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at
his own expense.

IC Compliance Notice

This Class A digital apparatus meets all requirements of the Canadian
Interference.-Causing Equipment Regulations of ICES-003.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health
or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

English_7

● safety information

important safety instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the apparatus.

13. Unplug this apparatus when a card is used. Use caution when

moving the cart/ apparatus combination to avoid injury from tip-over.

14. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as
powersupply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.

15. This product is intended to be supplied by a Listed Power Supply Unit marked "Class

2" and rated from 24 Vac (50/60Hz) min 0.6A or 12 Vac min 0.6A.

Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus

Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to provide
customers with more environment-friendly products.The Eco mark represents
Samsung Techwin’s will to create environment-friendly products, and indicates
that the product satisfies the EU RoHS Directive.

8_ contents

contents

INTRODUCTION

9

9

Features

10

Components and Accessories

11

COMPONENT NAMES AND

FUNCTIONS

INSTALLATION

12

12

Before installation

12

Installation

15

Adjusting the monitoring

direction for the camera

CONNECTION

16

16

Connecting to Monitor

16

Connecting to Power

17

Using Coaxial Communications

CAMERA OPERATION

19

19

Menu Configuration

19

Menu Setup

TROUBLESHOOTING

36

36

Troubleshooting

SPECIFICATIONS

37

37

Specifications

39

Dimension

English_9

● introduction

introduction

FEATURES

yHigh Resolution

Use of a 1.3 mega pixel CMOS device provides clear pictures with a horizontal resolution
of 1000.

y Excellent Sensitivity

The built-in high sensitivity COLOR CMOS produces a clear image.

-

Color : 0.03Lux (F1.2, 50IRE), 0.001Lux (1sec, F1.2, 50IRE)

0.01Lux (F1.2, 30IRE), 0.0003Lux (1sec, F1.2, 30IRE)

B/W : 0.003Lux (F1.2, 50IRE), 0.0001Lux (1sec, F1.2, 50IRE)

0.001Lux (F1.2, 30IRE), 0.00003Lux (1sec, F1.2, 30IRE)

y Intelligence

Without an external sensor, you can use this product to detect motion and generate
alarms and thus more efficient monitoring can be achieved.

y SSNR4 (Samsung Super Noise Reduction) Function

High performance W7 Chip removes noises of GAIN resulting from the low light level and
shows a vivid, high definition video even in the dark place.

y Day&Night

This camera has a function that automatically selects the mode that is appropriate
for daytime or night-time conditions. The COLOR mode operates in daytime condi

­tions to provide optimum colors, and B/W mode operates in night-time conditions to
enhance the definition of the image.

y SSDR (Samsung Super Dynamic Range)

If an object has a large variance between bright and dark areas, it will keep bright areas bright
and make selected dark areas bright, so that the overall brightness can be maintained.

y PROFILE

You can set a mode according to the camera installation conditions.

- BASIC, DAYNIGHT, BACKLIGHT, ITS, INDOOR, USER

y WDR

By adopting a proprietary W7 chip, the camera delivers clear, high quality pictures
even in backlight, by increasing exposure in dark areas while decreasing it in bright
areas; a corrected image with clear details results.

y DIS (Digital Image Stabilizer)

The DIS function compensates for any camera movement, to produce more stable
pictures.

10_ introduction

introduction

y Miscellaneous Functions

HLC(High Light Compensation), REVERSE , D-ZOOM, SHARPNESS and PRIVACY
functions are provided.

y Communication

Coaxial communication methods are supported.

- Coaxial Communications : Pelco Coaxitron

y OSD

The camera’s OSD is complimented by 17 languages.

- English, Chinese, Korean, Japanese, German, Italian, French, Spanish, Russian,
Czech, Polish, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese

COMPONENTS AND ACCESSORIES

Check if the following items are included in the product package.

Quick Manual

SCV-5085

oGyG~kyG
}TyGkGj

SCV-5083 Quick Manual Screws

Video Output Cable Template Wrench

케이블 구멍

English_11

● introduction

COMPONENT NAMES AND FUNCTIONS

1

Dome Cover

2

Shield Case

3

Rotate base : control rotating angle of camera.

❹

Cushion Lens : It prevents the lens and dome cover from the external force generated

during camera distribution.(Remove it before camera installation.)

❺

Vari-focal Lens Module : 3 ~ 8.5mm (F1.2).

❻

Function Setup switch : Display the menu on the screen and move the cursor to four

directions to confirm status or after changing a selected item.
When menu is off,move this switch left(NEAR) or right(FAR) for

adjusting focus.move thisswitch up(TELE) or down(WIDE) for
adjusting zoom.

❼

Video Output Terminal to Monitor

❽

Pan Base : Control panning angle of camera.

➒

Power Input Connector

❿

Ground Terminal

⓫

D & N Input Terminal : You can switch to Day & Night Mode by connecting an external

signal to this terminal.

⓬

MD Output Terminal: Motion detection signals are output through this terminal.

⓭

Video Output Jack : Video signals are output through this port. Connect this port to the

Video IN port of a monitor.

TOP

FRONT

AF

N

W

F

VIDEO

➊

➋

➌ ➎

➏

➐

➑

➒

⓫

⓬

❿

⓭

➍

12_

Installation

BEFORE INSTALLATION

Ensure you read out the following instructions before installing the camera:

yYou have to check whether the location (ceiling or wall) can bear five times the weight of your

camera.

yDon’t let the cable to be caught in improper place or the electric line cover to be damaged.

Otherwise it may cause a breakdown or fire.
yBefore installing your camera, you have to adjust the lens focus, zoom, and switch settings.
yWhen installing your camera, don’t allow any person to approach the installation site.

INSTALLATION

Disassembling

1. Using the L-wrench provided, loosen 3 screws by turning them counterclockwise and separate

the dome cover.

2. Remove the cushion lens.

` If the cushion lens is not removed, the

image can be covered up.

Installation

Dome Cover

TOP
FRONT

English_13

● InstallatIon

Installing the camera on a ceiling or wall

1. Drill holes on the ceiling by matching to the holes on the case bed, and insert
plastic anchors (HUD 5) (not included) fully into the holes. Fix the case bed on
the ceiling by using Tapping screws (TH M4 x L30). (3 places)

screw

2. Connect Power and video cables and arrange them through the hole you want
to pass when mounting the main body on the mounting bracket, note that not
to damage or squeeze the cables.

Power input terminal

Function jack

Video output jack

TOP
FRONT