Samsung C4303-P, C4203-P, C4301-P, SCC-C4201-P User Manual

0 (0)

220X POWER ZOOM CAMERA

SCC-C4201(P), C4203(P), C4301(P), C4303(P)

Owner’s Instructions Gebrauchsanleitung Guide d’utilisation Guía del usuario Istruzioni per l’uso

E

D

F

Es

I

220x

 

 

LOW

 

DIG

COLIGHT

ITAL

 

LOR CAM

 

 

ERA

Part : AB68-00366A Printed in Korea

Be sure to read the "Safety Precautions" in this manual to ensure correct use and operation of this product.

Safety Precautions

The purpose of safety precautions is to prevent accidental injury or property damage. Always observe all safety precautions.

The precautions are divided into "Warnings" and "Cautions" as distinguished below:

 

 

Warning

Caution

Ignoring this precaution

Ignoring this precaution

may result in death or

may result in injury or

serious injury.

damage to property.

 

 

Warnings

1.Be sure to use only the standard adapter which is specified in the specification sheet. (page 28~31)

Using any other adapter could cause fire, electrical shock, or damage to the product.

2.Check the external connection terminals first before connecting the power source and signal wires. Connect the alarm signal wires to the alarm terminals. Connect the DC12V power adapter to the SCC-C4201(P)/C4203(P) power input, making sure that the currect polarity is observed.

Connect the DC12V or AC24V power adapter to the SCC-C4301(P)/C4303(P) power input.

3.Do not connect multiple cameras to a single adapter. (Exceeding the capacity may cause abnormal heat generation or fire.)

4.Securely plug the power cord into the power receptacle. (A loose connection may result in fire.)

5.When mounting the camera on a wall or ceiling, fasten it safely and securely. (A falling camera may

cause personal injury.)

E

6.Do not place conductive objects (e.g., screwdrivers, coins, and metal things) or containers filled with water on top of the camera. (Serious injury may result from fire, electrical shock, or falling objects.)

7.Do not install the unit in humid, dusty, or sooty locations. (Doing so may cause fire or electrical shock.)

8.If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. (Continued use in such a condition may cause fire or electrical shock.)

9.If this product fails to operate normally, contact the store of purchase or your nearest service center. Never disassemble or modify this product in any way. (Problems caused by unauthorized user disassembly or repairs are not covered by your warranty.)

10.When cleaning, do not spray water directly onto parts of the product. (Doing so may cause fire or electrical shock.) Gently wipe the surface with a dry cloth. Never use detergents or chemical cleaners on the product, as this may result in discoloration of surface or cause damage to the finish.

1

2

Cautions

1.Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibration or magnetic interference.

2.Do not install in a location subject to high temperature, low temperature, or high humidity. (Doing so may cause fire or electrical shock.)

3.Avoid a location which is exposed to direct sunlight, or near heat sources such as heaters or radiators. (Neglecting to do so may result in a risk of fire.)

4.If you want to relocate the already installed product, be sure to turn off the power before moving or reinstalling it.

5.Install in a well-ventilated location.

6.Remove the power plug from the outlet when there is a lightning storm. (Neglecting to do so may cause fire or damage to the product.)

Contents

1.

Overview.............................................................

5

 

2.

Part Names and Functions ...............................

6

 

3.

Installation........................................................

8

 

 

Checking the Package Contents

8

 

 

E

 

Preparing the Cables ........................................

9

 

 

 

Connecting the Cables ....................................

10

 

4.

Navigating the Setup Menu...........................

12

 

 

Structure of the Setup Menu ...........................

12

 

 

- CAMERA ID...................................................

16

 

 

- IRIS................................................................

17

 

 

- BLC................................................................

17

 

 

- ALC ...............................................................

17

 

 

- MANU ............................................................

18

 

 

- SHUTTER......................................................

19

 

 

- AGC (MOTION) .............................................

20

 

 

- WHITE BAL ...................................................

21

 

 

- SPECIAL .......................................................

22

 

 

- AUTO FOCUS ...............................................

24

 

 

- MOTION DET ................................................

24

 

 

- PRESET ........................................................

25

 

 

- COLOR/ BW ..................................................

26

 

 

- EXIT...............................................................

28

 

5.

Specifications ...............................................

29

 

6.

Others ............................................................

33

 

3

4

1 Overview

This camera is a high performance surveillance camera provides a maximum of 220x zoom surveillance capability with its 22x optical zoom lens and digital zoom IC.

It is a multifunction camera that is equipped with all of key features of the existing surveillance cameras :

Day & Night function (SCC-C4203(P), C4303(P)) ensures sharp and clear images even at night.

Low - Light Surveillance function that enables image capture even under extremely low light conditions.

White Balance function that provides accurate color rendition under any light conditions.

BLC function that enables effective back light compensation even under a spotlight or a very bright incident light.

Auto Focus function that automatically tracks and on the moving subject.

RS485/ Wired remote control function.

Broadcast System

SCC-C4201/ C4203/ C4301/ C4303 : NTSC System

SCC-C4201P/ C4203P/ C4301P/ C4303P : PAL System

Power System/Power Consumption

SCC-C4201(P), C4203(P) : DC 12V/5.0W

SCC-C4301(P), C4303(P) : AC 24V, DC 12V/5.5W

5

2 Part Names and Functions

E

 

 

 

220x Power Zoom

 

 

 

LOW LIGHT

 

 

 

DIGITAL COLOR CAMERA

 

 

SET-UP button

 

 

 

Instead of “POWER”, “DC IN”

 

 

 

is writtern in

 

 

 

SCC-C4201(P)/4203(P).

REMOTE

RS-485

POWER

Instead of “POWER”, “PWR

 

 

 

IN” and instead of “GND”,

 

 

 

“DC12&AC24V” is writtern in

 

 

 

SCC-C4301(P)/4303(P).

SET-UP button

The function of the SET-UP button varies depending on whether you are currently in Normal Operation mode (i.e., the Setup Menu is not displayed) or Setup Menu mode.

In Normal Operation Mode

- UP/ DOWN buttons : Use as the ZOOM Tele button and the ZOOM Wide button respectively.

- LEFT/ RIGHT buttons : Use as the FOCUS Near button and the FOCUS Far button respectively.

- SETUP button: Use to enter the Setup Menu.

Hold the SETUP button for longer than 3 seconds to enter the Setup Menu.

6

In Setup Menu Mode

- UP/ DOWN buttons: Use to move the cursor up or down.

- LEFT/ RIGHT buttons: Use to move the cursor left or right, or to sequentially view the values that can be assigned to a parameter.

- ENTER button: Use to select a Sub Menu item, and to accept the current value.

ZOOM/ FOCUS REMOTE terminals

Use to control ZOOM/ FOCUS from an external controller. Depending on the input conditions, the terminals can be set to 4 different modes.

(Operating Voltage Range : +3V ~+13V, -3V~-13V)

Code

Item

Tele

Wide

Far

Near

 

A

-6V

+6V

+6V

-6V

 

B

-6V

+6V

-6V

+6V

 

C

+6V

-6V

+6V

-6V

 

D

+6V

-6V

-6V

+6V

Caution : In the event of a simultaneous input of RS485 and wired remote control signal, whichever was input first will be activated.

(For a camera with the ROM version 1.2 or above, please refer to page 33.)

ALARM OUT terminal

An alarm signal is output from this terminal when the MOTION DET mode is activated or BW mode is activated. (Open Collector: DC24V 40mA Max)

VIDEO OUT terminal

Connect the monitor's VIDEO IN. The video signal from the camera is transmitted to the monitor via this terminal.

RS485 terminal

RS485 remote control terminal.

Power LED

Lights when power is on.

POWER IN terminal

Plug in the power adapter here.

7

3 Installation

BeforeInstallation

Checking the Package Contents

Make sure that the following accessories are included in

E

the package.

 

220x

 

 

 

LOW

LIGHT

DIGITAL

 

 

COLOR

CAMERA

 

 

 

SCC-C4201(P),C4203(P),

User's Guide

C4301(P),C4303(P)

 

Mount Adapter

Screw (2)

Terminal Block

8

Samsung C4303-P, C4203-P, C4301-P, SCC-C4201-P User Manual

PreparingtheCables

To install and use the camera, first prepare the following cables.

The requirements for the power adapter, which connects to the camera's POWER IN terminal, are as follows:

SCC-C4201(P), SCC-C4203(P) : DC12V 600mA

SCC-C4301(P), SCC-C4303(P) : AC24V 300mA

DC12V 600mA

Video Cable

Use a BNC cable, such as the one shown below, to connect the camera's VIDEO OUT to the monitor.

ConnectingtheCables

1.Connect one end of the BNC cable to the VIDEO OUT.

2.Connect the other end of the BNC cable to the VIDEO IN of the monitor.

E

Video terminals on the back of the monitor

BNC cable

RS-485

POWER

3.Plug in the power adapter. Use a "minus" screwdriver to connect one part of the power adapter, which consists of two lines, to the POWER terminal of the camera as follows :

POWER SELECTION switch underneath the power adapte

POWER SELECTION switch underneath the power adapte

REMOTE

RS-485

POWER

9

10

Loading...
+ 13 hidden pages