Samsung ProXpress M453x series, SL-M4530ND, SL-M4530NX Service Manual

MonoLaserPrinter

ProXpressM453xseries SL-M4530NX/SL-M4530ND

(Ver1.02)

SERVICE

MANUAL

MonoLaserPrinter

Contents

1.Precautions

2.ProductSpecicationsandDescription

3.DisassemblyandReassembly

4.Troubleshooting

5.BlockDiagramandConnectionDiagram

6.ReferenceInformation

RefertotheservicemanualintheGSPN(seetherearcover)formoreinformation.

Contents

1.Precautions........................................................................................................................................1−1

1.1.Safetywarning..........................................................................................................................1−1

1.2.Cautionforsafety......................................................................................................................1−2

1.2.1.Toxicmaterial...............................................................................................................1−2

1.2.2.Electricshockandresafetyprecautions...........................................................................1−2

1.2.3.Handlingprecautions.....................................................................................................1−4

1.2.4.AssemblyandDisassemblyprecautions.............................................................................1−4

1.2.5.Disregardingthiswarningmaycausebodilyinjury..............................................................1−5

1.3.ESDprecautions........................................................................................................................1−6

1.4.CautionforDataLoss.................................................................................................................1−7

2.ProductSpecicationsandDescription....................................................................................................2−1

2.1.ProductOverview......................................................................................................................2−1

2.2.Specications............................................................................................................................2−2

2.2.1.GeneralSpecication.....................................................................................................2−2

2.2.2.PrintSpecications........................................................................................................2−4

2.2.3.PaperHandlingspecication............................................................................................2−5

2.2.4.Softwareandsolutionspecication...................................................................................2−7

2.2.5.Supplies.......................................................................................................................2−8

2.2.6.MaintenanceParts.........................................................................................................2−9

2.2.7.Option.......................................................................................................................2−10

2.3.SystemConguration...............................................................................................................2−11

2.4.FeedingSystem.......................................................................................................................2−15

2.4.1.FeedingSystemOverview.............................................................................................2−15

2.4.2.Cassette.....................................................................................................................2−18

2.4.3.Pick-UpUnit..............................................................................................................2−19

2.4.4.RegistrationUnit.........................................................................................................2−20

2.4.5.MPF(Multi-PurposeFeeder)Unit...................................................................................2−21

2.5.ImageCreation........................................................................................................................2−22

2.5.1.Printingprocessoverview.............................................................................................2−22

2.5.2.TonerCartridge...........................................................................................................2−23

2.5.3.ImagingUnit..............................................................................................................2−24

2.5.3.1.Development................................................................................................2−25

2.6.Fuserunit...............................................................................................................................2−26

2.6.1.Fuserunitoverview.....................................................................................................2−26

2.6.2.Fuserunitdrive...........................................................................................................2−27

2.6.3.Fuserunittemperaturecontrol........................................................................................2−28

2.7.LaserScanningUnit(LSU)........................................................................................................2−29

2.7.1.LaserScanningUnitOverview.......................................................................................2−29

Contents

2.7.2.LaserScanningOpticalpath..........................................................................................2−30

2.8.DriveSystem..........................................................................................................................2−31

2.8.1.DriveMotors..............................................................................................................2−31

2.8.2.MainDriveUnit..........................................................................................................2−33

2.8.3.ExitDriveUnit...........................................................................................................2−34

2.8.4.TrayLiftingDriveUnit.................................................................................................2−35

2.9.HardwareConguration............................................................................................................2−36

2.9.1.Mainboard.................................................................................................................2−38

2.9.2.MSOK......................................................................................................................2−40

2.9.3.SO-DIMMPBA..........................................................................................................2−41

2.9.4.USBHostPBA...........................................................................................................2−42

2.9.5.SMPSboard...............................................................................................................2−43

2.9.6.FuserDriveBoard(FDB)..............................................................................................2−45

2.9.7.HVPSboard...............................................................................................................2−47

2.9.8.SCFboard..................................................................................................................2−48

2.9.9.EraserPBA................................................................................................................2−49

2.9.10.Cover-OpenPBA........................................................................................................2−49

2.9.11.Deve_TonerCrumJointPBA.........................................................................................2−50

2.9.12.TonerRemainSensorPBA............................................................................................2−50

2.9.13.JointPBA..................................................................................................................2−51

2.9.14.EEPROMPBA...........................................................................................................2−52

2.9.15.CRUMPBA...............................................................................................................2−52

3.DisassemblyandReassembly................................................................................................................3−1

3.1.Precautionswhenreplacingparts..................................................................................................3−1

3.1.1.Precautionswhenassemblinganddisassembling.................................................................3−1

3.1.2.PrecautionswhenhandlingPBA.......................................................................................3−1

3.1.3.ReleasingPlasticLatches................................................................................................3−2

3.2.Replacingthemaintenancepart....................................................................................................3−3

3.2.1.FuserUnit....................................................................................................................3−3

3.2.2.TransferRoller..............................................................................................................3−4

3.2.3.Pick-Up_Forwardroller..................................................................................................3−5

3.2.4.SCFSeparationRoller....................................................................................................3−6

3.2.5.SCFPick-upRollerandForwardRoller.............................................................................3−7

3.3.ReplacingthemainSVCpart.......................................................................................................3−8

3.3.1.RearCover...................................................................................................................3−8

3.3.2.FrontCover..................................................................................................................3−9

3.3.3.Right_LeftCover........................................................................................................3−10

3.3.4.TopCover..................................................................................................................3−11

3.3.5.OPEUnit...................................................................................................................3−12

3.3.6.HDD(HardDiskDrive)................................................................................................3−13

Contents

3.3.7.MainBoard................................................................................................................3−14

3.3.8.JointPBA..................................................................................................................3−15

3.3.9.SMPSandFDB(FuserDriveBoard)...............................................................................3−16

3.3.10.OPCmotorandMainmotor..........................................................................................3−17

3.3.11.MainDriveUnit..........................................................................................................3−18

3.3.12.DuplexclutchandPickupclutch....................................................................................3−19

3.3.13.HVPSboard...............................................................................................................3−20

3.3.14.ExitUnit....................................................................................................................3−21

3.3.15.LSU..........................................................................................................................3−22

3.3.16.EraserLampPBA........................................................................................................3−23

3.3.17.CoverOpenPBA.........................................................................................................3−24

3.3.18.PickupAssy..............................................................................................................3−25

3.3.19.SecondCassetteFeeder(OptionalTray)...........................................................................3−28

3.3.19.1.PBA-SCF....................................................................................................3−28

3.3.19.2.LiftUnit......................................................................................................3−29

3.3.19.3.Clutch.........................................................................................................3−30

3.3.19.4.DriveUnit...................................................................................................3−31

4.Troubleshooting..................................................................................................................................4−1

4.1.Controlpanel............................................................................................................................4−1

4.2.UnderstandingthestatusLED......................................................................................................4−3

4.3.UpdatingFirmware....................................................................................................................4−4

4.3.1.UpdatingwiththeUSBcable...........................................................................................4−4

4.3.2.UpdatingfromtheNetwork............................................................................................4−5

4.4.JAMremoval............................................................................................................................4−9

4.5.ServiceMode..........................................................................................................................4−18

4.5.1.EnteringtheServiceMode............................................................................................4−18

4.5.2.ServiceModeMenu.....................................................................................................4−19

4.5.3.TechModeMenudescription.........................................................................................4−21

4.6.ErrorCodeandTroubleshooting.................................................................................................4−27

4.6.1.11–2Txx(Papermismatcherror)....................................................................................4−28

4.6.2.Ax-xxxx(Motor_Fan_SensorError)................................................................................4−29

4.6.3.Cx-xxxx(Supplies_MaintenancePartError).....................................................................4−38

4.6.4.H1-xxxx(OptionalCassetteFeederError)........................................................................4−47

4.6.5.Mx-xxxx(PaperHandlingError(Jam_PaperEmtpyetc)).....................................................4−72

4.6.6.Sx-xxxx(SystemError)................................................................................................4−85

4.6.7.U1-xxxx(Fusererror)..................................................................................................4−94

4.6.8.U2-xxxxtype(LSU)errorcode....................................................................................4−103

4.7.Imagequalityproblem............................................................................................................4−104

4.8.SPDS(SmartPrinterDiagnosticSystem)Application...................................................................4−118

4.8.1.SPDSAppInstallationandLogin.................................................................................4−119

Contents

4.8.1.1.SPDSAppInstallation.................................................................................4−119

4.8.1.2.UserRegistrationRequest.............................................................................4−120

4.8.1.3.Change_ResetPassword...............................................................................4−121

4.8.1.4.Login........................................................................................................4−122

4.8.1.5.SelectConnectMethod................................................................................4−124

4.8.1.6.Consenttocustomerinformation....................................................................4−127

4.8.2.SPDSMenuIntroduction............................................................................................4−128

4.8.2.1.ErrorMode................................................................................................4−128

4.8.2.2.DiagnosisMode..........................................................................................4−133

4.8.2.3.TestMode..................................................................................................4−134

4.8.2.4.InformationMode.......................................................................................4−135

4.8.2.5.ServiceMode.............................................................................................4−137

4.8.3.CorrectiveUpload.....................................................................................................4−142

4.8.4.Exceptions...............................................................................................................4−143

5.BlockDiagramandConnectionDiagram.................................................................................................5−1

5.1.BlockDiagram..........................................................................................................................5−1

5.2.ConnectionDiagram...................................................................................................................5−2

5.2.1.ConnectionDiagram(1).................................................................................................5−2

5.2.2.ConnectionDiagram(2).................................................................................................5−3

5.2.3.ConnectionDiagram(3).................................................................................................5−4

6.ReferenceInformation..........................................................................................................................6−1

6.1.ToolforTroubleshooting.............................................................................................................6−1

6.2.Glossary...................................................................................................................................6−2

6.3.TheSamplePatternfortheT est....................................................................................................6−8

6.4.ModelNameandCode...............................................................................................................6−9

6.5.DocumentRevisionList............................................................................................................6−10

1.Precautions

Inordertopreventaccidentsanddamagestotheequipmentpleasereadtheprecautionslistedbelowcarefullybefore servicingtheproductandfollowthemclosely.

1.1.Safetywarning

1)Onlytobeservicedbyafactorytrainedservicetechnician.

Highvoltagesandlasersinsidethisproductaredangerous.Thisproductshouldonlybeservicedbyafactorytrained servicetechnician.

2)UseonlySamsungreplacementparts.

Therearenouserserviceablepartsinsidetheproduct.Donotmakeanyunauthorizedchangesoradditionstothe productasthesecouldcausetheproducttomalfunctionsandcreateanelectricshocksorrehazards.

3)LaserSafetyStatement

TheprinteriscertiedintheU.S.toconformtotherequirementsofDHHS21CFR,chapter1SubchapterJfor ClassI(1)laserproducts,andelsewhereiscertiedasaClassIlaserproductconformingtotherequirementsof IEC/EN60825-1:2014.ClassIlaserproductsarenotconsideredtobehazardous.Thelasersystemandprinterare designedsothereisneveranyhumanaccesstolaserradiationaboveaClassIlevelduringnormaloperation,user maintenanceorprescribedservicecondition.

•Wavelength:800nm

•Beamdivergence

-Parallel:11degrees

-Perpendicular:35degrees

•Maximumpowerofenergyoutput:12mW

WARNING

NeveroperateorservicetheproductwiththeprotectivecoverremovedfromLaser/Scannerassembly.Thereected beam,althoughinvisible,candamageyoureyes.

Whenusingthisproduct,thesebasicsafetyprecautionsshouldalwaysbefollowedtoreduceriskofre,electric shock,andpersonalinjury.

4)Lithiumbatterynotreplaceablebyuser

1.Precautions

1.2.Cautionforsafety

1.2.1.Toxicmaterial

Thisproductcontainstoxicmaterialsthatcouldcauseillnessifingested.

1)Pleasekeepimagingunitandtonercartridgeawayfromchildren.Thetonerpowdercontainedintheimagingunitand tonercartridgemaybeharmful,andifswallowed,youshouldcontactadoctor.

1.2.2.Electricshockandresafetyprecautions

Failuretofollowthefollowinginstructionscouldcauseelectricshockorpotentiallycauseare.

1)Useonlythecorrectvoltage,failuretodosocoulddamagetheproductandpotentiallycauseareorelectricshock.

2)Useonlythepowercablesuppliedwiththeproduct.Useofanincorrectlyspeciedcablecouldcausethecableto overheatandpotentiallycauseare.

3)Donotoverloadthepowersocket,thiscouldleadtooverheatingofthecablesinsidethewallandcouldleadtoare.

4)Donotallowwaterorotherliquidstospillintotheproduct,thiscancauseelectricshock.Donotallowpaperclips,pins orotherforeignobjectstofallintotheproduct,thesecouldcauseashortcircuitleadingtoanelectricshockorrehazard.

5)Nevertouchtheplugsoneitherendofthepowercablewithwethands,thiscancauseelectricshock.Whenservicing theproduct,removethepowerplugfromthewallsocket.

6)Usecautionwheninsertingorremovingthepowercord.Whenremovingthepowercord,gripitrmlyandpull.The powercordmustbeinsertedcompletely,otherwiseapoorcontactcouldcauseoverheatingleadingtoare.

7)Takecareofthepowercable.Donotallowittobecometwisted,bentsharplyaroundcornersorpowercablemaybe damaged.Donotplaceobjectsontopofthepowercable.Ifthepowercableisdamageditcouldoverheatandcausea re.Exposedcablescouldcauseanelectricshock.Replacethedamagedpowercableimmediately,donotreuseor repairthedamagedcable.Somechemicalscanattackthecoatingonthepowercable,weakeningthecoverorexposing cablescausingreandshockrisks.

1.Precautions

8)Ensurethatthepowersocketsandplugsarenotcrackedorbrokeninanyway.Anysuchdefectsshouldberepaired immediately.T akecarenottocutordamagethepowercableorplugswhenmovingthemachine.

9)Usecautionduringthunderorlightningstorms.Samsungrecommendsthatthismachinebedisconnectedfromthe powersourcewhensuchweatherconditionsareexpected.Donottouchthemachineorthepowercordifitisstill connectedtothewallsocketintheseweatherconditions.

10)A voiddampordustyareas,installtheproductinacleanwellventilatedlocation.Donotpositionthemachineneara humidierorinfrontofanairconditioner.Moistureanddustbuiltupinsidethemachinecanleadtooverheatingand causeareorcausepartstorust.

11)Donotpositiontheproductindirectsunlight.Thiswillcausethetemperatureinsidetheproducttorisepossiblyleading totheproductfailingtoworkproperlyandinextremeconditionscouldleadtoare.

12)Donotinsertanymetalobjectsintothemachinethroughtheventilatorfanorotherpartofthecasing,itcouldmake contactwithahighvoltageconductorinsidethemachineandcauseanelectricshock.

13)WhenreplacingtheSMPSboard,pleasewait5minutesafterunpluggingthepowercord,thenreplaceit.Y ou cangetashockbytheelectricdischarge.

1.Precautions

1.2.3.Handlingprecautions

Thefollowinginstructionsareforyourownpersonalsafetytoavoidinjuryandsoasnottodamagetheproduct.

1)Ensuretheproductisinstalledonalevelsurface,capableofsupportingitsweight.Failuretodosocouldcause theproducttotiporfall.

2)Theproductcontainsmanyrollers,gearsandfans.Takegreatcaretoensurethatyoudonotcatchyourngers,hairor clothinginanyoftheserotatingdevices.

3)Donotplaceanysmallmetalobjects,containersofwater,chemicalsorotherliquidsclosetotheproductwhichifspilled couldgetintothemachineandcausedamageorashockorrehazard.

4)Donotinstallthemachineinareaswithhighdustormoisturelevels,besideonopenwindoworclosetoahumidieror heater.Damagecouldbecausedtotheproductinsuchareas.

5)Donotplacecandles,burningcigarettes,etcontheproduct,Thesecouldcauseare.

6)Ensurethatthemachineisinstalledandusedinproperareatomeetthetemperatureandhumidityspecications.

•IfthemachineisstoredatbelowzeroCelsiusforalongtime,donotusethemachineinstantlyaftermovement.It canmalfunction.Takecareofthemachinestorage.IfthemachineisstoredatbelowzeroCelsiusforalongtime, keepthemachineatroomtemperatureandinstallit.

1.2.4.AssemblyandDisassemblyprecautions

1)ReplacepartscarefullyandalwaysuseSamsungparts.T akecaretonotetheexactlocationofpartsandalsocable routingbeforedismantlinganypartofthemachine.Ensureallpartsandcablesarereplacedcorrectly.Pleasecarryout thefollowingproceduresbeforedismantlingtheproductorreplacinganyparts.

2)Ensurethatpowerisdisconnectedbeforeservicingorreplacinganyelectricalparts.

3)Disconnectinterfacecablesandpowercables.

4)Onlyuseapprovedspareparts.Ensurethatpartnumber,productname,anyvoltage,currentortemperaturerating arecorrect.

5)Whenremovingorre-ttinganypartsdonotuseexcessiveforce,especiallywhenttingscrewsintoplastic.

6)Takecarenottodropanysmallpartsintothemachine.

7)HandlingoftheOPCDrum

•TheOPCDrumcanbeirreparablydamagedifitexposedtolight.TakecarenottoexposetheOPCDrumeither todirectsunlightortouorescentorincandescentroomlighting.Exposureforaslittleas5minutescandamage thesurfaceofthephotoconductivepropertiesandwillresultinprintqualitydegradation.T akeextracarewhen servicingtheproduct.RemovetheOPCDrumandstoreitinablackbagorotherlightproofcontainer.T ake carewhenworkingwiththeCovers(especiallythetopcover)openaslightisadmittedtotheOPCareaandcan damagetheOPCDrum.

•TakecarenottoscratchthegreensurfaceofOPCDrumUnit.IfthegreensurfaceoftheDrumCartridgeis scratchedortouchedtheprintqualitywillbecompromised.

1.Precautions

1.2.5.Disregardingthiswarningmaycausebodilyinjury

1)Becarefulwiththehightemperaturepart.

Thefuserunitworksatahightemperature.Usecautionwhenworkingontheprinter.Waitforthefuserunitto cooldownbeforedisassembly.

2)Donotputngersorhairintotherotatingparts.

Whenoperatingaprinter,donotputhandorhairintotherotatingparts(Paperfeedingentrance,motor,fan,etc.). Ifdo,youcangetharm.

3)Whenyoumovetheprinter,usesafeliftingandhandlingtechniques.

Thisprinterisheavy .Usetheliftinghandleslocatedoneachsideofthemachine.Backinjurycouldbecausedif youdonotliftcarefully .

4)Ensuretheprinterisinstalledsafely .

Ensuretheprinterisinstalledonalevelsurface,capableofsupportingitsweight.Failuretodosocouldcausethe printertotiporfallpossiblycausingpersonalinjuryordamagingtheprinter.

5)Donotinstalltheprinteronaslopingorunstablesurface.Afterinstallation,doublecheckthattheprinterisstable.

1.Precautions

1.3.ESDprecautions

Certainsemiconductordevicescanbeeasilydamagedbystaticelectricity .Suchcomponentsarecommonlycalled “ElectrostaticallySensitive(ES)Devices”orESDs.ExamplesoftypicalESDsare:integratedcircuits,someeldeffect transistors,andsemiconductor“chip”components.Thetechniquesoutlinedbelowshouldbefollowedtohelpreducethe incidenceofcomponentdamagecausedbystaticelectricity .

CAUTION

Besurenopowerisappliedtothechassisorcircuit,andobserveallothersafetyprecautions.

1)Immediatelybeforehandlingasemiconductorcomponentorsemiconductor-equippedassembly,drainoffany electrostaticchargeonyourbodybytouchingaknownearthground.Alternatively,employacommerciallyavailable wriststrapdevice,whichshouldberemovedforyourpersonalsafetyreasonspriortoapplyingpowertotheunit undertest.

2)AfterremovinganelectricalassemblyequippedwithESDs,placetheassemblyonaconductivesurface,suchas aluminumorcopperfoil,orconductivefoam,topreventelectrostaticchargebuildupinthevicinityoftheassembly.

3)UseonlyagroundedtipsolderingirontosolderordesolderESDs.

4)Useonlyan“anti-static”solderremovaldevice.Somesolderremovaldevicesnotclassiedas“anti-static”can generateelectricalchargessufcienttodamageESDs.

5)DonotuseFreon-propelledchemicals.Whensprayed,thesecangenerateelectricalchargessufcienttodamageESDs.

6)DonotremoveareplacementESDfromitsprotectivepackaginguntilimmediatelybeforeinstallingit.Most replacementESDsarepackagedwithallleadsshortedtogetherbyconductivefoam,aluminumfoil,oracomparable conductivematerial.

7)ImmediatelybeforeremovingtheprotectiveshortingmaterialfromtheleadsofareplacementESD,touchtheprotective materialtothechassisorcircuitassemblyintowhichthedevicewillbeinstalled.

8)MaintaincontinuouselectricalcontactbetweentheESDandtheassemblyintowhichitwillbeinstalled,until completelypluggedorsolderedintothecircuit.

9)MinimizebodilymotionswhenhandlingunpackagedreplacementESDs.Normalmotions,suchasthebrushingtogether ofclothingfabricandliftingone’sfootfromacarpetedoor,cangeneratestaticelectricitysufcienttodamageanESD.

1.Precautions

1.4.CautionforDataLoss

TopreventlossofcustomersdatatheSVCengineerprovidesend-userwithrelevantinformationinadvance.

2.ProductSpecicationsandDescription

2.1.ProductOverview

•PrintingSpeed(Mono)

•Upto45ppminA4(47ppminLetter)

•Processor

•DualcoreCPU1GHz

•Memory(Std./Max)

•M4530ND:512MB/2GB

•M4530NX:1GB/2GB

•320GBHDD

•M4530ND:Optional

•M4530NX:Standard

•OPEDisplay

•M4530ND:4–lineLCD

•M4530NX:4.3inchT ouchScreenPanel

2.ProductSpecicationsandDescription

2.2.Specications

ProductSpecicationsaresubjecttochangewithoutnotice.

2.2.1.GeneralSpecication

ItemSpecication

ProcessorCPU1GHz(C4N+A1000)

UserInterfaceDisplay

•M4530ND:4–lineLCD

•M4530NX:4.3inchTouchScreenPanel

Memory(Std./Max)

•M4530ND:512MB/2GB

•M4530NX:1GB/2GB

Storage(HDD)

•M4530ND:Optional

•M4530NX:Standard

USB(Device)Hi-SpeedUSB2.0

USB(Host)Hi-SpeedUSB2.0

USB(EDI)Yes

WiredLANStd(Ethernet10/100/1000BaseTX)

AdditionalWired LANSupport

N/A

WirelessLANOption(IEEE802.11b/g/n)

Interface

NFCOption(Active)

FromSleepLessthan23sec

WarmupTime

PowerOffLessthan25sec

Readylessthan16W

Averageoperating mode

Lessthan850W

PowersavemodeLessthan1.3W

Power Consumption

PowerOffLessthan0.45W

DefaultSleepDelayTime1min

Max.SleepDelayTime120min

Europe:AC220~240V/50Hz/5A

USA:AC100~127V/60Hz/10A

Power Requirement

InputV oltage

Korea:AC220~240V/50/60Hz/5A

PrintingSimplex/ Duplex

Lessthan54dBA(SoundPressure)

StandbyLessthan30dBA(SoundPressure,BackgroundNoiseOnly)

AcousticNoise Level(Sound Power/Pressure)

SleepBackgroundNoiseLevel

Dimension(WxD xH)

Set(mm)

(withoutany options)

433x460x368mm(17.05x18.11x14.49inches)

2.ProductSpecicationsandDescription

ItemSpecication

Weight

Set(Kg)

(withsupplies /withoutany options)

•4530NX:27.32Kg[60.23lbs]

•4530ND:27.19Kg[59.94lbs]

Recommended MonthlyPrint V olume

2,000~10,000Images

Reliability& Service

MaxMonthlyDuty Cycle

200,000Images

Operating10to30°C(50to86°F)

Temperature

Storage-20to40°C(-4to104°F)

Operating20to80%RH

Humidity

Storage10to90%RH

2.ProductSpecicationsandDescription

2.2.2.PrintSpecications

ItemSpecication

Simplex45ppminA4(47ppminLetter)

PrintSpeed

Duplex(Simplex toDuplex)

27ipminA4(28ipminLetter)

FromReadyAsfastas6.5sec

FromSleepLessthan23sec FPOT

FromColdbootLessthan36sec

OpticalUpto1,200x600dpi

Resolution

EnhancedUpto1,200x1,200dpieffectiveoutput(1,200x600x2bit)

PrinterLanguagesPCL5e/PCL6/PostScript3/PDFDirectV1.7

PCL111ScalableFonts(IncludeOCR-A/OCR-B)/1Bitmap

Font

Postscript3136ScalableFonts

WindowsXP(32/64bit)/Vista(32/64bit)/2003Server(32/64bit)/2008Server(32/64bit)/

Win7(32/64bit)/2008ServerR2(64bit)/Win8(32/64bit)/Win8.1(32bit/64bit)/ 2012Server(64bit)/2012ServerR2(64bit)

Linux•RedHatEnterpriseLinuxWS5,6

•Fedora12,13,14,15,16,17,18,19,20

•OpenSuSE11.2,11.3,11.4,12.1,12.2,12.3

•Ubuntu10.04,10.10,11.04,11.10,12.04,12.10,13.04,13.10,14.04

•SuSELinuxEnterpriseDesktop10,11

•Debian6,7

•Mint13,14,15,16

UNIX•SunSolaris9,10,11(x86,SPARC)

•HP-UX11.0,11iv1,11iv2,11iv3(P A-RISC,Itanium)

•IBMAIX5.1,5.2,5.3,5.4,6.1,.7.1(PowerPC)

ClientOSSupport

MacOSMacOS:X10.5-10.9,

BasicIPassign(Ethernetspeed,DHCP),SWS,SNMP ,SNTP,SetIP ,SLP ,DDNS,Mdns,

WINS,LPD/LPR,SMB,FTP,SMTP ,UPnP

NetworkProtocol

AdvancedLDAP ,Kerberos,IPSec,802.1x,IPP,WSD

DuplexPrintBuilt-in

DirectPrintYes

Max.PrintArea•Ltr:208x270mm(8.18"x10.6")

•A4:201x289mm(7.91"x11.37")

PrintFeaturesDirectPrint/SecurePrint

2.ProductSpecicationsandDescription

2.2.3.PaperHandlingspecication

ItemSpecication

Standard550-sheetcassetteTray(20lbor75g/m²)

(520Sheets@80g/m²)

Multipurpose100-sheetMPtray(80g/m²)

OtherOptions550-sheetcassetteTray(20lbor75g/m²)

(520Sheets@80g/m²)

InputCapacity

Maximum2,850SheetCassetteTray(550Std+100MP+4x550SCF)(@75g/m²)

(2,700@80g/m²)

Capacity

550sheets@20lb(75g/m²)

(520Sheets@80g/m²)

Mediasizes

A4/Letter/Legal/Ocio/Folio/JISB5/ISOB5/Executive/A5SEF/LEF/ Statement/A6/PostCard4x6/EnvelopeB5/EnvelopeMonarch/Envelope COM-10->EnvelopeNo10/EnvelopeDL/EnvelopeC5/EnvelopeC6/Custom

Mediatypes

PlainPaper/ThinPaper/Bond/Punched/Pre-Printed/Recycled/Envelope /Label/CardStock/Letterhead/Thick/Colored->Color/Archive/Cotton

Mediaweight

•SupportedW eight:60-163g/m²(16-43lb)

•ThinPaper(60-69g/m²)

•PlainPaper(70-90g/m²)

•ThickPaper(91-120g/m²)

•BondPaper(105-120g/m²)

•Cardstock(121-163g/m²)

StandardCassette Tray

Sensing

•H/WInstallDetect:Y es

•PaperEmpty&LowLevelDetect:Y es

•PaperT ypeDetect:No

•PaperSizeDetect:Y es

Capacity•PlainPaper:100sheets

MediasizesMin:76.2mmx127mm(3"x5")

Max:216mmx356mm(8.5"x14.0")

MediatypePlain/Thin/Bond/Pre-printed/Recycled/Envelope/Label/Cardstock/Thick/

Cotton/Color/Archive/Thicker

Mediaweight•SupportedW eight:60-220g/m²(16~59lb)

•ThinPaper(60-69g/m²)

•PlainPaper(70-90g/m²)

•ThickPaper(90-120g/m²)

•BondPaper(105-120g/m²)

•Cardstock(121-163g/m²)

•ThickerPaper(164-220g/m²)

MP(Multipurpose) Tray

Sensing•PaperEmptyDetect:Y es

•PaperT ypeDetect:No

•PaperSizeDetect:No

2.ProductSpecicationsandDescription

ItemSpecication

StackingCapacity

(FaceDown)

500sheets@20lb(75g/m²)

OutputCapacity

OutputFull sensing

Yes

Max.Size216x356mm(8.5"x14")

Min.Size76x127mm(3"x5") Printingsize

Margin(T/B/L/R)T/B/L/R:1mm

SupportBuilt-in

MediasizesA4,Letter,Legal,Ocio,Folio

MediatypesPlain,Thin,Thick,Recycled,Pre-Printed,punched,Letterhead

DuplexPrinting

Mediaweight16~32lb(60~120g/m²)

2.ProductSpecicationsandDescription

2.2.4.Softwareandsolutionspecication

ItemSpecication

AnywebPrintWindows

EasyPrinterManagerWindows/Mac

EasyColorManagerN/A

EasyDocument Creator

N/A

DirectPrintingUtilityWindows

EasyDeployment Manager

Windows

EasyEcoDriverWindows

Application

UniversalPrinter Driver

Windows

GCP(GoogleCloud Print)

Yes

MobilePrinting

AirPrintYes

DeviceManagementSyncThru

OutputManagementCounThru

Document Managementand Distribution

SmarThruWorkFlow

SecuritySecuThru

Solution

MobilitySCP

Authentication(Local)Yes

Authentication (Network)

Yes(Kerberos/SMB/LDAP)

IPAddressFilteringIPv4Filtering/IPv6Filtering/MACFiltering

HDDOverwrite (Standard)

MIOOnly(ManualImageOvewrite)

HDDOverwrite(Max. Overwrites)

SecurePrintY es

EncryptedSecurePrintYes

EncryptedPDFMode (EncryptedScanning)

Yes

IPSecYes

SmartCard Authentication

N/A

Security

OthersW atermark

2.ProductSpecicationsandDescription

2.2.5.Supplies

ItemsModelNameLife

Initial-Approx.7,000pages

StandardMLT-D304SApprox.7,000pages

HighYieldMLT-D304LApprox.20,000pages

TonerCartridge*

ExtraHighYieldMLT -D304EApprox.40,000pages

ImagingUnitMLT-R304Approx.100,000pages

NOTE

*DeclaredyieldvalueinaccordancewithISO/IEC19752.Thenumberofpagesmaybeaffectedbyoperatingenvironment, printinginterval,graphics,mediatypeandmediasize.

**Basedonsimplex3averageletter/A4-sizepagesperprintjoband5%coverage.ActualYieldmayvarybasedonotherfactors suchasdevicespeed,mediatype,mediasize,tonercoverage,traysource,averageprintjobcomplexity,ratioofsimplex /duplexprintingandoperatingenvironment.

2.ProductSpecicationsandDescription

2.2.6.MaintenanceParts

ItemsPartCodeLife

FuserUnit•JC91-01177A(220V)

•JC91-01176A(110V)

150,000pages

TransferRollerAssyJC93-00393A200,000pages

Tray1Roller(Pickup/Forward)JC97-02259A200,000pages

Tray1ReverserollerJC97-02259A100,000pages

Pickup/Forwardroller(forTray2~4)JC97-02259A200,000pages

Reverseroller(forTray2~4)JC97-02259A100,000pages

MPRollerJC73–00295A100,000pages

MPReverserollerJC73-00328A100,000pages

NOTE

Lifeofpartmayvarybecauseofthepapersheettype,theprintpatterns,andjobtypesused.

2.ProductSpecicationsandDescription

2.2.7.Option

OptionList

ItemModelRemark

SecondCassetteFeederSL-SCF4500550Sheets(@75gsm)

StandSL-DSK001S-

MemoryUpgradeKitSL-MEM0012GB

WirelessLANSL-NWE001XWireless+NFC

OptionSpecication

ModelItemSpecication

ModelNameSL-SCF4500

Capacity550Sheets(@75gsm)(520sh@80gsm)

MediaSizesA4/Letter/Legal/Ocio/Folio/JISB5/ISOB5/Executive/A5

/Statement/A6/Custom

MediatypesPlain/Thin/Recycled/Thick/Archive/Bond/Cardstock

Mediaweight•SupportedWeight:60-163g/(16-43lb)

•ThinPaper(60-70g/)

•PlainPaper(70-90g/)

•ThickPaper(90-105g/)

•BondPaper(105-120g/)

•Cardstock:(121-163g/)

Sensing•H/WInstallDetect:Y es

•PaperEmpty:Y es

•PaperT ypeDetect:No

•PaperSizeDetect:No

Dimension(WxDx H)

433x459.3x145.8mm

SecondCassette Tray(Feeder)

Weight9.8kg(21.6lb)

ModelNameSL-DSK001S

Dimension(WxDx H)

480x553x120mm

Stand

Weight13.3kg(29.3lb)

ModelNameSL-MEM001 MemoryUpgradeKit

Size2GB

WirelessLANModelNameSL-NWE001X(Wireless+NFC)

2.ProductSpecicationsandDescription

2.3.SystemConguration

1)FrontView

1Controlpanel

2MemoryModule(DIMM)cover

3Frontcover

4Shortstand

5Paperlevelindicator

6Optionaltray

7Tray1

8Multi-purposetraycover

9USBmemoryport

10Frontcoverbutton

11Outputtray

12Wireless/NFCkitarea

13Multi-purposetraypaperwidthguides

14Multi-purposetraypaperextension

15Imagingunit

16Tonercartridge

2.ProductSpecicationsandDescription

2)RearView

1Wireless/NFCkitportcover

2Rearcover

3Powerreceptacle

4Power-switch

5USBport

6EDIportforcardreader

7Networkport

2.ProductSpecicationsandDescription

SystemLayout

1TonerCartridge

2ImagingUnit

3Exit

4LSU

5FuserUnit

6Cassette

7Optionaltray

8Pickuproller/Reverseroller/Forwardroller

9MPtray

2.ProductSpecicationsandDescription

PaperPath

2.ProductSpecicationsandDescription

2.4.FeedingSystem

2.4.1.FeedingSystemOverview

ThefeedingsystempicksupapaperfromthecassetteorMPtrayandtransportsittothemachineinside.Itmainlyconsists ofthecassette,pickuproller,feedroller,registrationroller,transferrollerunit,exitunit,anddriveunit.

2.ProductSpecicationsandDescription

[FeedingSystemComponent]

No.Description

1Tray1Papertray

2Tray2Papertray

3Tray3Papertray

4Tray4Papertray

5Tray1pickup/reverse/forwardrollers

6Tray2pickup/reverse/forwardrollers

7Tray3pickup/reverse/forwardrollers

8Tray4pickup/reverse/forwardrollers

9MPTraypickup/reverse/forwardrollers

10Tray1feedroller

11Tray2feedroller

No.Description

12Tray3feedroller

13Tray4feedroller

14Registrationsensor

15Registrationroller

16Transferroller

17Exitsensor

18Exitroller1

19Exitroller2

20Exitroller3

21Duplexdriveroller

22Duplexsensor

2.ProductSpecicationsandDescription

No.Description

23Mainbinfullsensor

24Stand

25Tray5Papertray

No.Description

26Tray5feedroller

27Tray5pickup/reverse/forwardrollers

•Pick-Uproller(T ray1~5andMPTray)

-Thisrollerpicksupthepaperfromthetray .

•Forwardroller(T ray1~5andMPTray)

-Thisrollerisplacedagainstthereverseroller.Ittransportsthepaperfromthepickuprollertofeedroller .

•Reverseroller(Tray1~5andMPTray)

-Thisrollerisplacedagainsttheforwardrollerandtransportsonlyonesheettothefeedroller.Whentwosheetsof

paperormorearetransportedfromthepickuproller,theloadofthetorquelimiterofthereverserollerisheavier thanthefrictionalforcebetweenthesheets.Asaresult,thereverserollerisstoppedandthelowerpaperdoes notadvanceanyfurther.

•Feedroller

-Thisrollertransportsthepapersentfromtheforward/reverserollertotheregistrationroller .

•Registrationroller

-ThisrolleralignstheleadingedgeofthepaperandtransportsthepapertothetransferrollerAssy.

2.ProductSpecicationsandDescription

2.4.2.Cassette

Thecassettestorespapers.

Papersizeissetusingthepaperguideintray.

BasicCassette(Tray1)

•Specication

1)Structure:DrawerType

2)Paperseparation:Reverserollertype

3)Capacity:550Sheets(75g/m²paperstandard)

4)Paper

-Plainpaper:A6,Statement,A5SEF/LEF ,Executive,B5,A4,Letter,Folio,Ofcio,Legal

-Autodetect:A5,Executive,B5,A4,Letter,Folio,Legal(7T ypes)

-SpecialPaper:Envelop,Label,Cardstock

5)Weight:plainpaper60~163g/m²

6)Plateknockuplifttype:LiftMotor+UpLimitSensor

+ 224 hidden pages

Samsung ProXpress M453x series, SL-M4530ND, SL-M4530NX Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual