Samsung BN68-02586A-04, PN63C8000, PN50C8000, PN58C8000, P8+ User Manual

0 (0)
Samsung BN68-02586A-04, PN63C8000, PN50C8000, PN58C8000, P8+ User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.

Comuníquese con SAMSUNG WORLDWIDE

Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de atención al cliente de SAMSUNG.

Country

Customer Care Center

Web Site

Address

CANADA

1-800-SAMSUNG (726-7864)

www.samsung.com

Samsung Electronics Canada Inc., Customer Service

 

 

 

55 Standish Court Mississauga, Ontario L5R 4B2

 

 

 

Canada

U.S.A

1-800-SAMSUNG (726-7864)

www.samsung.com

Samsung Electronics America, Inc. 105 Challenger

 

 

 

Road Ridgefield Park, NJ 07660-0511

manual user TV Plasma

Plasma TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model______________ Serial No.______________

© 2010 Samsung Electronics Co., Ltd. All rights reserved.

BN68-02586A-04

 

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

See the warranty card for more information on warranty terms.

Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on no expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use, as well as burned in images, are not covered by your Samsung limited warranty.

SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.

Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

In the United States : 1-800-SAMSUNG (1-800-726-7864)

In Canada : 1-800-SAMSUNG

User Instructions

Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 16 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image.

Heat on the top of the Plasma TV

The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product.

This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product.

The product is making a “cracking” noise.

A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environm ent such as temperature or humidity. This is normal and not a defect of the unit.

Cell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

Avoid operating the TV at temperatures below 41°F (5°C)

A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to the screen.

Damages caused by the above effect are not covered by the Warranty.

After-images on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.

Warranty

Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty.

2 English

Contents

 

Getting Started

 

yy

List of Features..........................................................

4

yy

Accessories...............................................................

4

yy

Install the Stand.........................................................

5

yy Viewing the Control Panel..........................................

6

yy Viewing the Remote Control......................................

7

yy Connecting to an Antenna.........................................

8

yy Plug & Play (Initial Setup)...........................................

8

Connections

 

yy Connecting to an AV Device......................................

9

yy Connecting to an Audio Device................................

11

yy Connecting to a PC.................................................

12

yy Changing the Input Source......................................

13

Basic Features

 

yy How to Navigate Menus..........................................

13

yy

Channel Menu........................................................

14

 

Seeing Channels

14

 

Using Favorite Channels

14

 

Memorizing Channels

14

 

Editing Channels

15

 

Other Features

15

yy

Picture Menu...........................................................

16

 

Changing the Preset Picture Mode

16

 

Adjusting Picture Settings

16

 

Economical Solutions

16

 

Changing the Picture Options

17

 

Viewing TV using the 3D function

19

 

Setting up the TV with Your PC

22

yy

Sound Menu............................................................

22

 

Changing the Preset Sound Mode

22

 

Adjusting Sound Settings

22

 

Sound Settings

22

yy

Setup Menu.............................................................

23

 

Setting the Time

23

 

Using the Sleep Timer

24

 

Setting the On / Off Timer

24

 

Locking Programs

24

 

Other Features

26

 

Picture In Picture (PIP)

27

yy

Support Menu.........................................................

27

Advanced Features

 

yy

Network Connection................................................

29

 

Connecting to a Wired Network

29

 

Connecting to a Wireless Network

31

yy

Media Play...............................................................

36

 

Connecting a USB Device

36

 

Connecting to your PC through a network

36

 

Screen Display

38

 

Playing Multiple Files

41

 

Media Play - Additional Functions

41

yy

Anynet+...................................................................

43

 

Setting Up Anynet+

44

 

Switching between Anynet+ Devices

44

 

Recording

45

 

Listening through a Receiver

45

 

Troubleshooting for Anynet+

46

yy

Internet@TV.............................................................

47

 

Getting Started with Internet@TV

47

 

Setting up Internet@TV

48

 

Using the Internet@TV service

50

 

PROFILE Widget

52

 

Widget Gallery

52

 

Troubleshooting for Internet@TV

53

 

Help Website

53

yy

AllShare...................................................................

54

 

About AllShare

54

 

Setting Up AllShare

54

Other Information

 

yy

Assembling the Cables............................................

56

yy Installing the Wall Mount..........................................

57

yy Securing the Installation Space................................

58

yy Securing the TV to the Wall......................................

59

yy

Troubleshooting.......................................................

60

yy

License....................................................................

63

yy

Specifications..........................................................

64

yy

Dimensions..............................................................

65

yy

Index.......................................................................

66

Check the Symbol!

TOOLS

t

 

 

 

 

Note

Step by Step Guide

 

This function can be used by pressing the

Indicates additional information.

Check here for instructions on how to open

 

TOOLS button on the remote control.

 

the relevant submenu within the OSD (on

 

 

 

screen display).

ENGLISH

English 3

Getting Started

List of Features

yy Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without a cable box / STB (Set-Top-Box) satellite receiver.

yy Media Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 36).

yy Internet@TV: You can use various internet services and view useful information and entertaining content (p. 47). yy AllShare: AllShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 54). yy Self Diagnosis: You can check whether picture or sound operate normally (p. 28).

Accessories

Please make sure the following items are included with your PDP TV. If any items are missing, contact your dealer.The items' colors and shapes may vary depending on the models.

yy Remote Control (BN68-01055A) & Batteries (AAA x 2)

yy Cleaning Cloth (BN63-01798B)

yy Owner’s Instructions

 

yy Warranty Card / Safety Guide / Quick Setup Guide

(M4 X L12)

 

(M4 X L16)

 

Blanking Bracket & Screw (1EA)

TV-Holder & Screw (1EA)

Cable Tie

(50 inches: BN63-06481A)

BN96-10788A

(BN61-05596A)

(58, 63 inches: BN63-06485A)

 

 

 

Holder-Wire (3EA)

Holder-Wire stand

Ferrite Core for Power Cord (A)

(BN61-05373A)

(BN61-05491A)

(3301-002052)

Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.

yy A Maximum distance between the ferrite core and the end of the cord inserted in the TV: 2 inches

yy B Maximum Distance between the ferrite core and the other end of the cord inserted in the AC outlet: 3/4 inch

Ferrite Core for Power Cord (B) (3301-002053)

A

B

 

For best cable connection to this product, be sure to use cables with a maximum thickness as below:

yy Maximum thickness - 0.55 inches (14mm)

Input Cables (Sold Separately)

HDMI

HDMI-DVI

Component

Composite (AV)

Coaxial (RF)

VGA

 

 

 

 

 

 

4 English

Install the Stand

 

s

 

s

 

 

 

 

 

s

s

 

 

 

s

Stand (1EA)

Guide Stand (1EA)

Follow the steps below to connect the TV to the stand. (50 inch model only)

Screws (M4 X L12)

 

 

Top view

 

 

 

Guide Stand

 

s

s

 

 

 

 

 

 

s

Stand

 

 

Front

 

Rear

 

Rear

 

 

 

1. Connect the Guide Stand to the Stand using five screws (M4 X L12) as shown.

5EA (M4 X L12)

5EA (M4 X L10)

Screws (10EA)

2

s

s

 

s

 

s

s

 

s

 

 

 

s

 

Screws (M4 X L10)

2. With your TV upright, connect the TV to the Stand.

3. Fasten two screws (M4 X L10) at position 1, and then

 

fasten three screws (M4 X L10) at position 2.

NOTE

xx Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them. xx Make sure that at least two persons lift and move the PDP TV.

xx Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to one side.

Started Getting 01

English 5

Getting Started

Viewing the Control Panel

The product color and shape may vary depending on the model.

Speakers

Power Indicator

Remote control sensor

SOURCEE

MENU

y

z

P(Power)

Standby mode

Power Indicator

Remote control sensor

Blinks and turns off when the power is on and lights up in standby mode. Aim the remote control towards this spot on the TV.

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTEREbutton on the remote control.

Displays an on-screen menu, the OSD (on screen display) of your TV’s features.

Adjusts the volume. In the OSD, use the ybuttons as you would use the ◄ and ► buttons on the remote control.

Changes the channels. In the OSD, use the zbuttons as you would use the ▼ and ▲ buttons on the remote control.

Turns the TV on or off.

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

6 English

Viewing the Remote Control

Turns the TV on and off.

Displays and selects the available video sources (p. 13)

Press to directly access channels.

Press to select additional channels (digital) being broadcasted by the same station. For example, to select channel “54-3”, press “54”, then press “–” and “3”.

Adjusts the volume.

Brings up the OSD.

Displays the Content View, which includes Channel List, Internet@TV, Media Play, AllShare and 3D.

Quickly select frequently used functions.

Returns to the previous menu.

Buttons used in the Channel List,

Internet@TV, Media Play menu, etc.

Use these buttons in Media Play and Anynet+ modes (p. 36, 43).

( : Controls recording for Samsung recorders that have the Anynet+ feature)

Installing batteries (Battery size: AAA)

POWER

ON/OFF

SOURCE

Turns the remote control light on or

 

off. When on, the buttons become

 

illuminated for a moment when pressed.

 

(Using the remote control with this button

 

set to ON will reduce the battery usage

 

time.)

 

Returns to the previous channel.

 

PRE-CH

 

Cuts off the sound temporarily.

MUTE

 

 

Changes channels.

CH LIST

 

CONTENT

 

MENU

INTERNET

 

@ TV

 

 

 

TOOLS

 

 

INFO

RETURN

 

 

EXIT

A

B

C

D

MEDIA.P YAHOO!

FAV.CH P.SIZE CC

Displays the channel list on the screen (p. 14).

Link to various internet services (p. 47).

Displays information on the TV screen.

Selects the on-screen menu items and changes the values seen on the menu.

Exits the menu.

MEDIA.P: Displays Media Play (p. 36).

YAHOO!: Runs the Yahoo widget. (p. 51).

3D: Sets the 3D mode. (p. 20). FAV.CH: Displays Favorite Channel Lists on the screen (p. 14).

P.SIZE: Selects the picture size (p. 18). CC: Controls the caption decoder (p. 26).

NOTE

xx Use the remote control within 23 feet from the TV.

xx Bright light may affect the performance of the remote control. Avoid use when nearby fluorescent lights or neon signs.

xx The color and shape may vary depending on the model.

Started Getting 01

English 7

Getting Started

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.Connecting the power cord and antenna.

VHF/UHF Antenna

Antenna Cable (Not Supplied)

Cable

ANT OUT or

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Input source is set to TV.

To return to the previous step, press the Red button.

1

Selecting a language

2

Selecting Store Demo

or Home Use

3

Selecting an antenna

4

Selecting a channel

5

ModeSetting the Clock

6

View the HD

Connection Guide

7

Enjoy the TV.

Press the ▲ or ▼ button, then press the ENTEREbutton.

POWER

Select the desired OSD (On Screen Display) language.

P

Press the ◄ or ► button, then press the ENTEREbutton.

y

Select the Home Use mode. Store Demo mode is for retail

 

y environments.

yy To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you

see the volume OSD, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select Air, Cable or Auto.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the channel source to memorize. When setting the antenna source to Cable, a step appears allowing you to

assign numerical values (channel frequencies) to the channels. For more information, refer to

Channel → Auto Program (p. 14).

Press the ENTEREbutton at any time to interrupt the memorization process. Set the Clock Mode automatically or manually.

yy Auto: Allows you to select DST (Daylight Saving Time) mode and time zone. yy Manual: Allows you to manually set the current date and time (p. 23).

The connection method for the best HD screen quality is displayed.

Press the ENTEREbutton.

If You Want to Reset This Feature...

OO MENUm→ Setup → Plug & Play → ENTERE

8 English

Connections

Connecting to an AV Device

Using an HDMI or HDMI/DVI Cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture.

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver

HDMI Cable (Not Supplied)

 

 

HDMI to DVI Cable (Not Supplied)

 

 

W

R

W

 

 

 

R

Red

White

Audio Cable (Not Supplied)

Device

HDMI OUT

Device

DVI OUT

AUDIO OUT

R-AUDIO-L

HDMI IN 1(DVI), 2(ARC), 3, 4, PC/DVI AUDIO IN

xx For better picture and audio quality, connect to a digital device using an HDMI cable.

xx An HDMI cable supports digital video and audio signals, and does not require an audio cable.

–– To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.

xx The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.

xx Be sure to use an HDMI cable with a thickness of 14 mm or less.

xx Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.

xx A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet function via HDMI.

xx This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the ARC function is supported by the HDMI IN 2(ARC) port only.

––If 3D Auto View is set to On, some functions such as Internet@TV may be disabled. In this case, set 3D Auto View or 3D Mode to Off.

xx The ARC function allows digital audio to output via the HDMI IN 2(ARC) port. It can be enabled only when the TV is connected with an audio receiver that supports the ARC function.

Connections 02

English 9

Connections

Using a Component (up to 1080p) or Audio/Video (480i only) Cable

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

Video Cable

(Not Supplied)

Y

W

R

R

W

R

B

G

R

 

 

Audio Cable

Component Cable

 

 

 

 

 

 

 

(Not Supplied)

 

 

 

 

 

W

Y

(Not Supplied)

R

W

R

B

G

 

 

 

 

 

 

 

 

Red White Yellow

Device

Y

R

W

VIDEO OUT AUDIO OUT

R

W

R

B

G

AUDIO OUT COMPONENT OUT

Red White

Red Blue Green

Device

R-AUDIO-L

R-AUDIO-L

PR

PB

G

When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (green) will not match the video cable (yellow).For better picture quality, the Component connection is recommended over the A/V connection.

Using an EX-Link Cable Connection

Available Devices: External devices that support EX-Link.

EX-LINK: Connector for service only.

10 English

Connecting to an Audio Device

Using an Optical (Digital) or Audio (Analog) Cable Connection

Available devices: Digital Audio System, Amplifier, DVD home theater

R W

Red White

Audio Cable (Not Supplied)

AUDIO IN

Digital Audio System

 

R-AUDIO-L

 

Optical Cable (Not Supplied)

 

 

Amplifier,

 

DVD home theater

OPTICAL

 

DIGITAL AUDIO OUT (OPTICAL)

xx When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.

xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

xx When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.

AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater. xx When connecting, use the appropriate connector.

xx When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the volume level with the amplifier’s volume control.

Connections 02

English 11

Connections

Connecting to a PC

Using an HDMI/DVI cable or a D-sub cable

 

 

 

 

HDMI to DVI Cable

 

 

 

 

 

(Not Supplied)

 

 

 

 

 

 

 

DVI OUT

 

 

 

 

 

 

AUDIO OUT

 

 

 

 

 

Audio Cable (Not Supplied)

 

 

 

 

 

 

AUDIO OUT

 

 

 

 

 

 

PC OUT

 

 

 

 

 

D-Sub Cable (Not Supplied)

 

Display Modes (D-Sub and HDMI/DVI Input)

 

 

 

 

Optimal resolution is 1920 X 1080 @ 60 Hz.

 

 

 

 

Mode

Resolution

Horizontal Frequency

Vertical Frequency

Pixel Clock Frequency

Sync Polarity

 

(KHz)

(Hz)

(MHz)

(H / V)

 

 

 

IBM

640 x 350

 

31.469

70.086

25.175

+/-

720 x 400

 

31.469

70.087

28.322

-/+

 

 

 

640 x 480

 

35.000

66.667

30.240

-/-

MAC

832 x 624

 

49.726

74.551

57.284

-/-

 

1152 x 870

 

68.681

75.062

100.000

-/-

 

720 x 576

 

35.910

59.950

32.750

-/+

VESA CVT

1152 x 864

 

53.783

59.959

81.750

-/+

1280 x 720

 

56.456

74.777

95.750

-/+

 

 

 

1280 x 960

 

75.231

74.857

130.000

-/+

 

640 x 480

 

31.469

59.940

25.175

-/-

 

640 x 480

 

37.861

72.809

31.500

-/-

 

640 x 480

 

37.500

75.000

31.500

-/-

 

800 x 600

 

37.879

60.317

40.000

+/+

 

800 x 600

 

48.077

72.188

50.000

+/+

 

800 x 600

 

46.875

75.000

49.500

+/+

 

1024 x 768

 

48.363

60.004

65.000

-/-

 

1024 x 768

 

56.476

70.069

75.000

-/-

 

1024 x 768

 

60.023

75.029

78.750

+/+

VESA DMT

1152 x 864

 

67.500

75.000

108.000

+/+

1280 x 1024

 

63.981

60.020

108.000

+/+

 

 

 

1280 x 1024

 

79.976

75.025

135.000

+/+

 

1280 x 720

 

45.000

60.000

74.250

+/+

 

1280 x 800

 

49.702

59.810

83.500

-/+

 

1280 x 800

 

62.795

74.934

106.500

-/+

 

1280 x 960

 

60.000

60.000

108.000

+/+

 

1360 x 768

 

47.712

60.015

85.500

+/+

 

1440 x 900

 

55.935

59.887

106.500

-/+

 

1440 x 900

 

70.635

74.984

136.750

-/+

 

1680 x 1050

 

65.290

59.954

146.250

-/+

VESA GTF

1280 x 720

 

52.500

70.000

89.040

-/+

1280 x 1024

 

74.620

70.000

128.943

-/-

 

 

VESA DMT / DTV CEA

1920 x 1080p

 

67.500

60.000

148.500

+/+

NOTE

xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. xx The interlace mode is not supported.

xx The set may operate abnormally if a non-standard video format is selected.

xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

12 English

Changing the Input Source

Source List

 

Use to select TV or an external input sources

SOURCE

such as a DVD / Blu-ray player / cable box /

 

STB satellite receiver.

 

OO MENUm→ Input → Source List → ENTERE

■■ TV / PC / AV / Component / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB

You can only choose external devices that are connected to the TV. In the Source List, connected inputs will be highlighted.

In the Source List, PC is always activated.

Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.

1

CONTENT

MENU

INTERNET

 

@ TV

 

 

 

 

 

2

 

 

 

 

3

RETURN

 

EXIT

4

 

 

 

1MENU button: Displays the main on-screen menu.

2ENTERE/ Direction button: Move the cursor and select an item. Confirm the setting.

3RETURN button: Returns to the previous menu.

4EXIT button: Exits the on-screen menu.

Edit Name

OO MENUm→ Input → Edit Name → ENTERE

■■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.

When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the HDMI IN 1(DVI) port, you should set the TV to DVI PC mode under Edit Name.

When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set the TV to DVI PC or DVI Devices mode under Edit Name.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1

MENUm

2

▲ / ▼

3

ENTERE

4

▲ / ▼

5

◄ / ►

6

ENTERE

7

EXITe

The main menu options appear on the screen:

Picture, Sound, Channel, Setup, Input, Application, Support.

Select an icon with the ▲ or ▼ button.

Press ENTEREto access the sub-menu.

Select the desired submenu with the ▲ or ▼ button.

Adjust the value of an item with the ◄ or ► button. The adjustment in the OSD may differ depending on the selected menu.

Press ENTEREto confirm the selection.

Press EXIT.

Connections 02

English 13

Basic Features

Channel Menu

¦¦ Seeing Channels

Channel List

Add, delete or set Favorite channels and use

CH LIST

the program guide for digital broadcasts.

OO MENUm→ Channel → Channel List → ENTERE

Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the ▲ / ▼ and ENTEREbuttons. Then you can watch the selected channel.

 

6

 

 

 

Air

Added

6-1

* TV #6

7

 

 

 

Air

Channels

8

 

 

 

Air

 

 

 

 

 

9

 

 

 

Air

 

9-1

* TV #9

 

10

 

 

 

Air

 

10-1

* TV #10

 

11-1

* TV #11

Air

 

 

Antenna

 

 

Zoom

 

Select kPage TTools

 

 

B

 

■■ All Channels: Shows all currently available channels. ■■ Added Channels: Shows all added channels.

■■ *Favorite: Shows all favorite channels.

■■ Programmed: Shows all currently reserved programs.

Using the color buttons with the Channel List xx Red (Antenna): Switches to Air or Cable.

xx B Green (Zoom): Enlarges or shrinks a channel number.

xx Yellow (Select): Selects multiple channel lists. Select desired channels and press the Yellow button to set all the selected channels at the same time. The cmark appears to the left of the selected channels.

xx k(Page): Move to next or previous page.

xx T(Tools): Displays the Channel List option menu. (The options menus may differ depending on the situation.)

Channel Status Display Icons

Icons Operations

c A channel selected.

*A channel set as a Favorite.

) A reserved Program.

¦¦ Using Favorite Channels

OO MENUm→ Channel → Channel List → ENTERE

Add to Favorite / Delete from Favorite t

Set channels you watch frequently as Favorites.

1.Select a channel and press the TOOLS button.

2.Add or delete a channel using the Add to Favorite or

Delete from Favorite menu respectively.

 

6

Air

 

Added

6-1

* TV #6

 

7

Air

 

Delete

 

Channels

8

Air

Add to Favorite

Timer Viewing

10

Air

 

9

Air

Channel Name Edit

 

9-1

* TV #9

Select All

 

10-1

* TV #10

 

 

 

 

11-1

* TV #11

 

Air

Antenna B Zoom Select kPage

TTools

To show all Favorite channels, click on the

FAV.CH

button shown on the right.

¦¦ Memorizing Channels

OO MENUm→ Channel → ENTERE

Antenna (Air / Cable) t

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

Auto Program

■■ Air: Air antenna signal.

■■ Cable: Cable antenna signal. ■■ Auto: Air and Cable antenna.

14 English

NOTE

xx When selecting the Cable TV system: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.

xx After all the available channels are stored, it starts to remove scrambled channels. The Auto Program menu then reappears.

¦¦ Editing Channels

OO MENUm→ Channel → Channel List → ENTERE

Channel Name Edit

1.Select a channel and press the TOOLS button.

2.Edit the channel name using the Channel Name Edit menu.

■■ Channel Name Edit (analog channels only): Assign your own channel name.

¦¦ Other Features

OO MENUm→ Channel → ENTERE

Clear Scrambled Channel

This function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.

How to Stop Searching Scrambled Channels

1.Press the ENTEREbutton to select Stop.

2.Press the ◄ button to select Yes.

3.Press the ENTEREbutton.

This function is only available in Cable mode.

Channel List

Channel List Option Menu

Set each channel using the Channel List menu options (Add / Delete, Timer Viewing, Select All / Deselect All). Option menu items may differ depending on the channel status.

1.Select a channel and press the TOOLS button.

2.Select a function and change its settings.

■■ Add / Delete: Delete or add a channel to display the channels you want.

NOTE

xx All deleted channels will be shown on the All Channels menu.

xx A gray-colored channel indicates the channel has been deleted.

xx The Add menu only appears for deleted channels.

xx Delete a channel from the Added Channels or Favorite menu in the same manner.

■■ Timer Viewing: You can set a desired channel to be displayed automatically at the reserved time. Set the current time first to use this function.

1.Press the ◄ / ► / ▲ / ▼ buttons to select the desired channel in Channel List.

2.Press the TOOLS button, then select Timer Viewing.

3.Scroll up or down to adjust the settings in the box, or use the numeric buttons on your remote to enter the date and time.

If you selected Once, Every Week or EveryDay

in Repeat you can enter the date you want.

4.Select OK, then press the ENTEREbutton when done.

NOTE

xx Only memorized channels can be reserved.

xx Reserved programs will be displayed in the

Programmed menu.

xx When a digital channel is selected, press the ► button to view the digital program.

■■ Select All: Select all the channels in the channel list. ■■ Deselect All: Deselect all the selected channels.

You can only select Deselect All when one or more channels are selected.

Programmed

(in Channel List)

You can view, modify or delete a show you have reserved to watch. Programmed timer viewing is displayed here. Highlight a program and press the TOOLS button to display Options.

■■ Change Info: Change a show you have reserved to watch. Begin with step 3 of “Timer Viewing” above.

■■ Cancel Schedules: Cancel a show you have reserved to watch.

This deletes the highlighted or selected program(s).

Features Basic 03

English 15

Basic Features

■■ Information: Display a show you have reserved to watch. (You can also change the reservation Information.)

Alternatively, you can view Information by highlighting a program and pressing the ENTEREbutton.

■■ Select All / Deselect All: Select or deselect all reserved programs.

Fine Tune

(analog channels only)

If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.

Settings are applied to the channel you're currently watching.

Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.

To reset the fine-tuning, select Reset.

Picture Menu

¦¦ Changing the Preset Picture Mode

OO MENUm→ Picture → Mode → ENTERE

Mode t

Select your preferred picture type.

■■ Dynamic: Suitable for a bright room.

■■ Standard: Suitable for a normal environment. ■■ Relax: Suitable for reducing eye strain.

Relax is not available in PC mode.

■■ Movie: Suitable for watching movies in a dark room.

■■ CAL-NIGHT: Selects a custom calibrated picture for lights off theater experience.

■■ CAL-DAY: Selects a custom calibrated picture for daylight viewing.

¦¦ Adjusting Picture Settings

OO MENUm→ Picture → ENTERE

Cell Light / Contrast / Brightness / Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality control.

NOTE

xx When you make changes to Cell Light, Contrast, Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted accordingly.

xx In PC mode, you can only make changes to Cell Light, Contrast and Brightness.

xx Settings can be adjusted and stored for each external device connected to the TV.

¦¦ Economical Solutions

The Eco Function can be used to enhance your power savings.

Eco Solution

OO MENUm→ Picture → Eco Solution → ENTERE

■■ Energy Saving (Off / Low / Medium / High / Picture Off): This adjusts the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except the volume button to turn on the screen. Until the screen turns on again, a distorted picture will be displayed for about 4 seconds.

■■ Eco Sensor (Off / On): To enhance your power savings; the picture settings will automatically adapt to the light in the room.

If you adjust the Cell Light, the Eco Sensor will be set to Off.

Min Cell Light: When Eco sensor is On, the minimum screen brightness can be adjusted manually.

If Eco Sensor is On, the display brightness may change (become slightly darker in most cases) depending on the surrounding light intensity.

■■ No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it's not receiving a signal.

Disabled when the PC is in power saving mode.

16 English

¦¦ Changing the Picture Options

Advanced Settings

OO MENUm→ Picture → Advanced Settings → ENTERE

(Advanced Settings are available in Standard / Movie /

CAL-NIGHT / CAL-DAY mode)

Compared to previous models, new Samsung TVs have a more precise picture.

In PC mode, you can only make changes to Dynamic Contrast, Gamma and White Balance.

Advanced Settings

Black Tone

: Off

Dynamic Contrast

: Medium

 

Gamma

: 0

 

Expert Pattern

: Off

 

RGB Only Mode

: Off

 

Color Space

: Native

 

White Balance

 

 

 

 

 

UMove EEnter

RReturn

■■ Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth.

■■ Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.

■■ Gamma: Adjust the primary color intensity.

■■ Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern function, the picture can be calibrated. If the OSD menu disappears or a menu

other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears.

Off: Turns the Expert Pattern function off.

Pattern1: This is a test screen designed to demonstrate the affects of display settings on shades.

Pattern2: This is a test screen designed to demonstrate the affects of display settings on colors.

After selecting Pattern1 or Pattern2, you can adjust any of the advanced settings to the desired effect.

While the Expert Pattern is running, sound is not output.

Only enabled in DTV, Component and HDMI modes.

■■ RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.

■■ Color Space (Auto / Native / Custom): Adjust the range of colors available to create the image. To adjust

Color, Red, Green, Blue and Reset, set Color Space to Custom.

■■ White Balance: Adjust the color temperature for a more natural picture.

R-Offset / G-Offset / B-Offset: Adjust each color's (red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each color's (red, green, blue) brightness.

Reset: Resets the White Balance to it's default settings.

■■ 10p White Balance (Off / On): Controls the white balance in 10 point intervals by adjusting the red, green, and blue brightness.

Available when the picture mode is set to Movie, CAL-NIGHT or CAL-DAY and when the external input is set to all input.

Some external devices may not support this function.

Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level.

Reset: Resets the 10p White Balance to its default settings.

■■ Flesh Tone: Emphasize pink “Flesh Tone.”

■■ Edge Enhancement (Off / On): Emphasize object boundaries.

■■ xvYCC (Off / On): Setting the xvYCC mode on increases detail and color space when watching movies from an external device (e.g. BD/DVD player) connected to the HDMI or Component IN jacks.

Available when the picture mode is set to Movie and when the external input is set to HDMI or Component.

Some external devices may not support this function.

Features Basic 03

English 17

Basic Features

Picture Options

OO MENUm→ Picture → Picture Options → ENTERE

In PC mode, you can only make changes to the Color Tone, Size and Screen Burn Protection.

Picture Options

Color Tone

: Normal

Size

: 16:9

 

Digital Noise Filter

:Auto

 

MPEG Noise Filter

:Auto

 

HDMI Black Level

: Normal

 

Film Mode

: Off

 

Motion Judder Canceller

: Standard

 

 

 

 

UMove EEnter

RReturn

■■ Color Tone (Cool / Normal / Warm1 / Warm2)

Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.

Settings can be adjusted and stored for each external device connected to an input on the TV.

■■ Size: Your cable box/satellite receiver may

have its own set of screen sizes as well. P.SIZE However, we highly recommend you use

16:9 mode most of the time. 16:9 : Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magnification. Zoom2: Use for a stronger magnification.

Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.

Available with HD 1080i / 720p signal in 16:9 mode.

4:3 : Sets the picture to basic (4:3) mode.

Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and center of the screen may cause image retention(screen burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.

18 English

NOTE

xx When Double (À, Œ) mode has been set in PIP (Picture-in-Picture), the Picture Size cannot be set.

xx After selecting Zoom1, Zoom2 or Wide Fit:

1.Press the ► button to select Position.

2.Press the ENTEREbutton.

3.Press the ▲ or ▼ button to move the picture up or down.

4.Press the ENTEREbutton.

5.Press the ► button to select Reset.

6.Press the ENTEREbutton to reset the picture to its default position.

xx After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you may need to center the picture:

1.Press the ◄ or ► button to select Position.

2.Press the ENTEREbutton.

3.Press the ▲, ▼, ◄ or ► button to move the picture.

4.Press the ENTEREbutton.

5.Press the ◄ or ► button to select Reset.

6.Press the ENTEREbutton.

xx HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)

xx Settings can be adjusted and stored for each external device you have connected to an input on the TV.

Input Source

Picture Size

ATV, AV,

16:9, Zoom1,

Component (480i, 480p)

Zoom2, 4:3

DTV(1080i),

16:9, 4:3, Wide Fit,

Component (1080i, 1080p),

Screen Fit

HDMI (720p, 1080i, 1080p)

 

PC

16:9, 4:3

■■ Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualization): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.

When the signal is weak, try other options until the best picture is displayed.

Auto Visualization: When changing analog channels, displays signal strength.

Only available for analog channels.

When bar is green, you are receiving the best possible signal.

■■ MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality.

■■ HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth.

Available only in HDMI mode.

■■ Film Mode (Off / Auto1 / Auto2 / Cinema Smooth): Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality.

An 1080p 24Hz HDMI signal must be input to use the Cinema Smooth function.

Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).

■■ Motion Judder Canceller (Off / Standard / Smooth / Demo): Removes drag from fast scenes with a lot of movement to provide a clearer picture.

If Motion Judder Canceller is Demo, you can compare the difference between on and off modes.

■■ Screen Burn Protection: To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. The Time setting allows you to program the time between movement of the picture in minutes.

Pixel Shift (Off / On): Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after-images on the screen.

Optimum condition for pixel shift

 

Item

TV/AV/Component/

 

HDMI/PC

 

 

Horizontal

0~4

4

Vertical

0~4

4

 

 

 

Time (minute)

1~4 min.

4 min.

 

 

 

The Pixel Shift value may differ depending on the monitor size (inches) and mode.

This function is not available in the Screen Fit mode.

Auto Protection Time (10 min. / 20 min. / 40 min. / 1 hour / Off): Set the time the screen remains idle with a still image until the screen saver is activated. The screen saver prevents the formation of ghost images on the screen.

Scrolling: This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time.

The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after performing the function, repeat the function again.

Press any key on the remote control to cancel this feature.

Side Gray (Light / Dark): When you watch TV with the screen ratio set to 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides.

¦¦ Viewing TV using the 3D function

OO MENUm→ Picture → 3D → ENTERE

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES.

Read and understand the following safety information before using the TV’s 3D function.

[[WARNING

xx Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea and headaches. If you experience any such symptom, stop viewing 3D TV, remove 3D Active Glasses and rest.

xx Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses and rest.

xx A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.

xx Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.)

xx Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may result in injuries due to running into objects, tripping, and/or falling.

English 19

Features Basic 03

Basic Features

3D

This exciting new feature enables you to view

3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D

Active Glasses (SSG-2100AB, SSG-2200AR, SSG-2200KR) to view 3D video.

Samsung 3D Active Glasses are sold separately. For more detailed purchasing

information, contact the retailer where you purchased this TV.

3D emitter

The LED on the 3D emitter blinks only when sending a 3D signal.

If there is any obstacle between the emitter and 3D Active Glasses, the proper 3D effect may not be obtained.

■■ 3D Mode: Select the 3D input format.

If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and then select 3D Mode from the list below that provides the best 3d viewing experience.

When watching 3D images, turn on 3D Active Glasses.

3D Mode

Operation

 

 

 

Off

Turns the 3D function off.

 

2D → 3D

Changes a 2D image to 3D.

 

Side by Side

Displays two images next to

 

each other.

 

 

 

Top & Bottom

Displays one image above

 

another.

 

 

 

Line by Line

Displays the images for the left

 

and right eye alternately in rows.

 

 

 

 

Displays the images for the

 

Vertical Stripe

left and right eye alternately in

 

 

columns.

 

Checker

Displays the images for the

 

left and right eye alternately in

 

Board

 

pixels.

 

 

 

 

Displays the images for the

 

Frequency

left and right eye alternately in

 

 

frames.

“Side by Side” and “Top & Bottom” are available when the resolution is 720p, 1080i and 1080p in DTV, HDMI and USB mode or when set to PC and the PC is connected through an HDMI/DVI cable.

“Vertical Strip”, “Line by Line” and “Checker Board” are available when the resolution is set to PC and the PC is connected through an HDMI/ DVI cable.

“Frequency” displays the frequency (60Hz only) when the resolution is set to PC.

■■ 3D → 2D (Off / On): Displays the image for the left eye only.

This function is deactivated when 3D Mode set to “2D → 3D” or Off.

■■ 3D View point: The overall adjustment of 3D perspective.

This function is deactivated when 3D Mode set to “2D → 3D” or Off.

■■ Depth: Adjusts focus / depth in “2D → 3D” mode.

This function is only activated when the 3D Mode is “2D → 3D”.

■■ Picture Correction: Adjusts the images for the left and right eye.

■■ 3D Auto View (Off / On): If 3D Auto View is set to On, a “Side by Side” format HDMI signal with one of the resolutions below is automatically switched to 3D. Here, correct 3D information must be sent from the Standard HDMI 3D Format.

If a 3D failure occurs due to a 3D information error, set 3D Auto View to Off and manually select a 3D Mode using the 3D button or corresponding menu.

Support resolution (16:9 only)

Resolution

Frequency (Hz)

1280 x 720p

60

Hz

1920 x 1080i

60

Hz

1920 x 1080p

24 / 30

/ 60 Hz

■■ 3D Optimize: The overall adjustment of 3D effect.

20 English

Resolution supported for HDMI PC mode

The resolution for HDMI PC mode is optimized to 1920 x 1080 input.

An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode.

How to watch the 3D image

3D

To watch in 3D, wear 3D glasses and press the power button on the glasses.

Viewing 3D TV motion pictures for long periods may cause eye fatigue and/or dizziness.

OK Cancel

LMove EEnter eExit

3D

UsiingttheLEFT//RIIGHTkeysonttherremotecontrol, sellectt tthe iicon suitable fforr tthe piictture on scrreen..

LMove EEnter eExit

1.Press the CONTENT button, then the Content View menu will appear.

2.Press the ◄ or ► button, then select 3D.

To watch in 3D, wear 3D Active Glasses and press the power button on the glasses.

3.Select OK, then press the ENTEREbutton.

4.Using the ◄ or ► buttons on your remote control, select the 3D Mode of the image you want to view.

Some 3D modes may not be available depending

on the format of the image source.

Supported formats and operating specifications for Standard HDMI 3D

The 3D formats indicated below are recommended by the HDMI association and must be supported.

Source signal format

Standard HDMI 1.4 3D

1920x1080p@24Hz x 2

1920x2205p@24Hz

1280x720p@60Hz x 2

1280x1470p@60Hz

 

 

The mode is automatically switched to 3D in one of the source signal formats above.

For the Standard HDMI 3D format with 24Hz, the TV is optimized as follows:

––Judder Reduction Display Mode: When Motion Judder Canceller is set to Smooth, you can watch a smooth picture without judder.

Before using 3D function...

NOTE

xx You may notice a small amount of screen flickering when watching 3D images in poor light conditions (from a strobe light, etc.), or under a fluorescent lamp (50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim the light or turn the lamp off.

xx 3D mode is automatically disabled in following cases: when changing a channel or the input source, or accessing Media Play or Internet@TV.

xx Some Picture functions are disabled in 3D mode. xx PIP is not supported in 3D mode.

xx 3D Active Glasses from other manufacturers may not be supported.

xx The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV. If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses.

xx Photos of Media Play are shown in “2D → 3D” mode only.

xx If you lie on your side while watching TV with 3D active glasses, the picture may look dark or may not be visible.

xx Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D pictures.

––Otherwise, you may not be able to enjoy proper 3D effects.

xx The ideal viewing distance should be three times or more the height of the screen. We recommend sitting with viewer's eyes on a level with the screen.

Features Basic 03

English 21

Basic Features

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

¦¦ Setting up the TV with Your PC

Set the input source to PC.

OO MENUm→ Picture → ENTERE

Auto Adjustment t

Adjust frequency values/positions and fine tune the settings automatically.

Not available when connecting with an HDMI/DVI cable.

Screen

■■ Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the center of screen.

■■ Position: Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjust the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.

■■ Image Reset: Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

Depending on the version of Windows and the video card, the actual screens on your PC will probably look different, but the same basic set-up information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1.Click on “Control Panel” on the Windows start menu.

2.Click on “Appearance and Themes” in the “Control Panel” window and a display dialog-box will appear.

3.Click on “Display” and a display dialog box will appear.

4.Navigate to the “Settings” tab on the display dialog-box.

yy The correct size setting (resolution) [Optimum: 1920 X 1080 pixels]

yy If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.

Sound Menu

¦¦ Changing the Preset Sound Mode

OO MENUm→ Sound → SRS TheaterSound →

ENTERE

SRS TheaterSound t

■■ Standard: Selects the normal sound mode. ■■ Music: Emphasizes music over voices.

■■ Movie: Provides the best sound for movies.

■■ Clear Voice: Emphasizes voices over other sounds.

■■ Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.

¦¦ Adjusting Sound Settings

OO MENUm→ Sound → Equalizer → ENTERE

Equalizer

Adjusts the sound mode (standard sound mode only).

■■ Balance L/R: Adjusts the balance between the right and left speaker.

■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.

■■ Reset: Resets the equalizer to its default settings.

¦¦ Sound Settings

OO MENUm→ Sound → ENTERE

SRS TruSurround HD (Off / On) t

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology.

SRS TruDialog (Off / On)

(standard sound mode only)

This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly.

22 English

xx TV Speaker: On, External Speaker: On
xx TV Speaker: Off, External Speaker: On

Preferred Language

(digital channels only)

Digital-TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages).

You can only select a language among the ones being broadcasted.

Multi-Track Sound (MTS) t

(analog channels only)

■■ Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.

■■ Stereo: Choose for channels that are broadcasting in stereo.

■■ SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.

Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital sound, reducing interference going to speakers and various digital devices such as an A/V Receiver/Home theater.

■■ Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.

■■ Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

Setup Menu

¦¦ Setting the Time

OO MENUm→ Setup → Time → ENTERE

Features Basic 03

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal.

■■ Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night.

Speaker Select (External Speaker / TV

Speaker)

A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.

When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.

When Speaker Select is set to External Speaker.

When Speaker Select is set to TV Speaker.

If there is no video signal, both speakers will be mute.

Time

■■ Clock: Setting the clock is for using various timer features of the TV.

OO The current time will appear every time you press the INFO button.

If you disconnect the power cord, you have to set the clock again.

Clock Mode (Auto / Manual)

–– Auto: Set the current time automatically using the time from a digital channel.

The antenna must be connected in order to set the time automatically.

––Manual: Set the current time manually.

Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.

Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm manually.

Available only when Clock Mode is set to

Manual.

You can set the Month, Day, Year, Hour and Minute directly by pressing the number buttons on the remote control.

English 23

Basic Features

DST (Daylight Saving Time) (Off / On): Switches the Daylight Saving Time function on or off.

This function is only available when the Clock Mode is set to Auto.

Time Zone: Select your time zone.

This function is only available when the Clock Mode is set to Auto.

¦¦ Using the Sleep Timer

OO MENUm→ Setup → Time → Sleep Timer → ENTERE

■■ Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

To cancel the Sleep Timer, select Off.

¦¦ Setting the On / Off Timer

OO MENUm→ Setup → Time → Timer 1 → ENTERE

You can set the TV to turn on automatically at a preset time.

■■ Timer 1 / Timer 2 / Timer 3: Three different on / off timer settings can be made. You must set the clock first.

Timer 1

On Time

 

 

 

00

 

 

 

 

00

 

 

 

 

am

 

 

Inactivate

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Off Time

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Inactivate

 

 

 

00

 

 

 

 

00

 

 

 

 

am

 

 

Volume

 

Source

 

 

 

 

Antenna

 

 

Channel

 

 

10

 

 

 

TV

 

 

Cable

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Repeat

 

 

Sun

Mon

 

Tue

Wed

 

Thu

Fri

Sat

Once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LMove

 

UAdjust

EEnter

RReturn

On Time / Off Time: Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.)

Volume: Set the desired volume level.

Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)

Antenna (when the Source is set to TV): Select Air or

Cable.

Channel (when the Source is set to TV): Select the desired channel.

Contents (when the Source is set to USB): Select a folder in the USB device containing music or photo files

to be played when the TV is turned on automatically.

NOTE

xx If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly.

xx When there is only one photo file in the USB, the Slide Show will not play.

xx If a folder name is too long, the folder cannot be selected.

xx Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer.

The cmark indicates the day is selected.

Auto Power Off (available only when the TV is turned on by the Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.

¦¦ Locking Programs

OO MENUm→ Setup → Security → ENTERE

Security

The PIN input screen appears, Enter your 4 digit PIN number.

■■ V-Chip: The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal identification number) before any of the V-Chip restrictions are set up or changed.

NOTE

xx V-Chip is not available in HDMI, Component or PC mode.

xx The default PIN number of a new TV set is “0-0-0-0”.

xx Allow All: Press to unlock all TV ratings. xx Block All: Press to lock all TV ratings.

V-Chip Lock (Off / On): You can block rated TV Programs.

24 English

TV Parental Guidelines: You can block TV programs

Canadian French: You can block TV programs

depending on their rating. This function allows you to

depending on their French Canadian rating.

control what your children are watching.

–– G: General / 8 ans+: Programming generally

–– TV-Y: Young children / TV-Y7: Children 7 and over /

considered acceptable for children 8 years and over

TV-G: General audience / TV-PG: Parental guidance

to watch on their own. / 13 ans+: Programming may

/ TV-14: Viewers 14 and over / TV-MA: Mature

not be suitable for children under the age of 13. /

audience

16 ans+: Programming is not suitable for children

–– ALL: Lock all TV ratings. / FV: Fantasy violence / V:

under the age of 16. / 18 ans+: Programming

Violence / S: Sexual situation / L: Adult Language / D:

restricted to adults.

Sexually Suggestive Dialog

The V-Chip will automatically block any

The V-Chip will automatically block certain

category that deals with more sensitive material.

categories dealing with more sensitive material.

For example, if you block the 8 ans+ category,

For example, if you block the TV-Y category,

then 13 ans+, 16 ans+ and 18 ans+ will

then TV-Y7 will automatically be blocked.

automatically be blocked also.

Similarly, if you block the TV-G category, then

Downloadable U.S. Rating: Parental restriction

all the categories in the young adult group will

information can be used while watching DTV channels.

be blocked (TV-G, TV-PG, TV-14 and TV-MA).

NOTE

The sub-ratings (D, L, S, V) work similarly. So,

xx If information is not downloaded from the

if you block the L sub-rating in TV-PG, then

broadcasting station, the Downloadable U.S.

the L sub-ratings in TV-14 and TV-MA will

Rating menu is deactivated.

automatically be blocked.

xx Parental restriction information is automatically

MPAA Rating: You can block movies depending on

downloaded while watching DTV channels. It

their MPAA rating. The Motion Picture Association of

may take several seconds.

America(MPAA) has implemented a rating system that

xx The Downloadable U.S. Rating menu

provides parents or guardians with advanced information

on which films are appropriate for children.

is available for use after information is

–– G: General audience (no restrictions). / PG: Parental

downloaded from the broadcasting station.

However, depending on the information from

guidance suggested. / PG-13: Parents strongly

the broadcasting station, it may not be available

cautioned. / R: Restricted. Children under 17 should

for use.

be accompanied by an adult. / NC-17: No children

xx Parental restriction levels differ depending on

under age 17. / X: Adults only. / NR: Not rated.

The V-Chip will automatically block any

the broadcasting station. The default menu

category that deals with more sensitive material.

name and Downloadable US Rating change

For example, if you block the PG-13 category,

depending on the downloaded information.

then R, NC-17 and X will automatically be

xx Even if you set the on-screen display to another

blocked.

language, the Downloadable U.S. Rating

Canadian English: You can block TV programs

menu will appear in English only.

depending on their Anglophone Canadian ratings.

xx The rating will automatically block certain

–– C: Programming intended for children under age 8. /

categories that deal with more sensitive

C8+: Programming generally considered acceptable

material.

for children 8 years and over to watch on their own.

xx The rating titles (For example: Humor Level..etc)

/ G: General programming, suitable for all audiences.

and TV ratings (For example: DH, MH, H..etc)

/ PG: Parental Guidance. / 14+: Programming

may differ depending on the broadcasting

contains themes or content which may not be

station.

suitable for viewers under the age of 14. / 18+: Adult

■■ Change PIN: The Change PIN screen will appear.

programming.

The V-Chip will automatically block any

Choose any 4 digits for your PIN and enter them. As

category that deals with more sensitive material.

soon as the 4 digits are entered, the Confirm New

PIN screen appears. Re-enter the same 4 digits. When

For example, if you block the G category, then

the Confirm screen disappears, your PIN has been

PG, 14+ and 18+ will automatically be blocked.

memorized.

 

Features Basic 03

English 25

Basic Features

How to watch a restricted channel

If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear:

This channel is blocked by V-Chip. Please enter the PIN to unblock.

If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to “0-0-0-0:” POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)

¦¦ Other Features

OO MENUm→ Setup → ENTERE

Menu Language

Set the menu language.

1.Select Menu Language and press the ENTERE button.

2.Choose desired language and press the ENTERE button.

Choose between English, Español and Français.

Caption

(On-Screen Text Messages)

 

■■ Caption (Off / On): You can switch the

CC

caption function on or off. If captions are

not available, they will not be displayed on

 

the screen.

 

The Caption feature doesn’t work in

 

Component, HDMI or PC modes.

 

■■ Caption Mode: You can select the desired caption mode.

The availability of captions depends on the program being broadcast.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels only) The Digital Captions function works with digital channels.

Service1~6 may not be available in digital caption mode depending on the broadcast.

■■ Digital Caption Options: (digital channels only)

Size: Options include Default, Small, Standard and Large. The default is Standard.

Font Style: Options include Default and Styles 0 to 7. The default is Style 0.

Foreground Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letter. The default is White.

Background Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the caption. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent, Solid and Flashing.

Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground

Opacity and Background Opacity to its default.

NOTE

xx Digital Caption Options are available only when Default and Service1 ~ Service6 can be selected in Caption Mode.

xx The availability of captions depends on the program being broadcasted.

xx The Default setting follows the standards set by the broadcaster.

xx The Foreground and Background cannot be set to have the same color.

xx You cannot set both the Foreground Opacity and the Background Opacity to Transparent.

Network (Network Type / Network Setup / Network Test / SWL(Samsung Wireless Link) / SWL connect)

For details on set up options, refer to the “Network Connection” instructions (p. 29).

General

■■ Game Mode (Off / On): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu.

26 English

NOTE

xx Precautions and limitations for game mode

––To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.

––If you display the TV menu in Game Mode, the screen shakes slightly.

xx Game Mode is not available when the input source is set to TV or PC.

xx After connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality.

xx If Game Mode is On:

––Picture mode is set to Standard and Sound mode is set to Movie.

––Equalizer is not available.

■■ BD Wise (Off / On): Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which support BD Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.

Available when connecting Samsung products that support BD Wise through a HDMI cable.

■■ Menu Transparency (Bright / Dark): Set the Transparency of the menu.

■■ Melody (Off / Low / Medium / High): Set so that a melody plays when the TV is turned on or off.

Melody is disabled when FastStart is On.

■■ FastStart (Off / On): When the TV is powered on, the screen will come on quickly with this feature.

Wireless Remote Control (Off / On)

Turn on/off or give permission to Samsung mobile phones/ devices.

You must have a Samsung Mobile phone/device which supports Wireless Remote Control. For more details, refer to each device's manual.

¦¦ Picture In Picture (PIP)

PIP t

You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode.

OO MENUm→ Setup → PIP → ENTERE

NOTE

xx For PIP sound, refer to the Sound Select instructions.

xx If you turn the TV off while watching in PIP mode, the PIP window will disappear.

xx You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.

xx While V-Chip or Internet@TV is in operation, the PIP function cannot be used.

xx PIP Settings

Main picture

Sub picture

Component, HDMI1/DVI,

 

HDMI2, HDMI3, HDMI4,

TV

PC

 

■■ PIP (Off / On): Activate or deactivate the PIP function.

■■ Air/Cable (Air / Cable): Select either Air or Cable as the input source for the sub-screen.

■■ Channel: Select the channel for the sub-screen.

■■ Size (Õ/ Ã/ À/ Œ): Select a size for the subpicture.

■■ Position (Ã/ / / œ): Select a position for the sub-picture.

In Double (À, Œ) mode, Position cannot be selected.

■■ Sound Select (Main / Sub): You can choose the desired sound (Main / Sub) in PIP mode.

Support Menu

OO MENUm→ Support → ENTERE

Legal Notice

The Legal Notice may differ depending on the country.

Features Basic 03

English 27

or
USB Drive
TV Rear Panel

Basic Features

Self Diagnosis

Self Diagnostic might take few seconds, this is part of the normal operation of the TV.

■■ Picture Test: Use to check for picture problems.

Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG).

No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

■■ Sound Test: Use the built-in melody sound to check for sound problems.

If you hear no sound from the TV’s speakers, before performing the sound test, make sure

Speaker Select is set to TV Speaker in the Sound menu.

The melody will be heard during the test even if

Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.

Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG).

No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

■■ Signal Information: (digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.

■■ Troubleshooting: If the TV seems to have a problem, refer to this description.

If none of these troubleshooting tips apply, contact the Samsung customer service center.

Software Upgrade

Software Upgrade can be performed by network connection or downloading the latest firmware from “www. samsung.com,” to a USB memory device.

Current Version - the software already installed in the TV.Software is represented as “Year/Month/Day_Version.”

Software Upgrade

Current Version

2010/01/18_000001

 

 

 

 

 

 

By USB

By Online

 

Alternative Software

----/--/--_------

 

UMove EEnter RReturn

Installing the Latest Version

■■ By USB: Insert a USB drive

containing the firmware upgrade file, downloaded from “www.samsung.com,”

into the TV. Please be careful

not to disconnect the power or remove the USB drive until upgrades are complete.

The TV will be turned off and

on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to to write down your settings so that you can easily reset them after the upgrade.

■■ By Online: Upgrade the software using the Internet.

First, configure your network. For detailed procedures on using the Network Setup, refer to the “Network Connection” instructions.

If the internet connection doesn’t operate properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade.

■■ Alternative Software (backup): Displays the software version downloaded through By Online. During the software upgrading, When the Upgrade will discontinue from last step, this function be activated.

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software.

28 English

Advanced Features

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.

¦¦ Connecting to a Wired Network

You can attach your TV to your LAN using cable in three ways:

yy You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 cable. See the diagram below.

 

TV Rear Panel

The Modem Port on the Wall

External Modem

 

 

(ADSL / VDSL / Cable TV)

Modem Cable (Not Supplied)

LAN Cable (Not Supplied)

yy You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem. Use a Cat 5 cable for the connection. See the diagram below.

The Modem Port on the Wall

External Modem

 

TV Rear Panel

 

IP Sharer

 

 

 

(ADSL / VDSL / Cable TV)

 

 

(having DHCP server)

 

 

 

Modem Cable (Not Supplied)

LAN Cable (Not Supplied)

LAN Cable (Not Supplied)

yy Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.

TV Rear Panel

The LAN Port on the Wall

LAN Cable (Not Supplied)

If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks are Dynamic Networks.

Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer.

You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support DHCP also let you use Static IP addresses.

Features Advanced 04

English 29

Advanced Features

Network Setup (Auto)

Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps:

How to set up automatically

1.Connect your TV to your LAN as described in the previous section.

2.Turn on your TV, press the MENU button on your remote, use the ▲ or ▼ button to select Setup, and then press the ENTEREbutton.

3.Use the ▲ or ▼ button to select Network in the Setup menu, and then press the ENTEREbutton. The Network screen appears.

Network

Network Type

: Wired

Network Setup

 

 

Network Test

 

 

SWL (Samsung Wireless Link)

: Off

 

SWL connect

 

 

 

UMove EEnter

RReturn

4.On the Network screen, select Network Type.

5.Set Network Type to Wired.

6.Select Network Setup. The Network Setup screen appears.

Network Setup

Internet Protocol Setup

:Auto

IPAddress

:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Subnet Mask

:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gateway

:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DNS

:Auto

 

 

 

DNS Server

:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UMove EEnter

RReturn

7.Set Internet Protocol Setup to Auto.

8.Auto acquires and enters the needed Internet values automatically.

9.Wait two minutes, and then press the RETURN button on your remote.

10.If the Network Function has not acquired the network connection values, go to the directions for Manual.

Network Setup (Manual)

Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address.

Getting the Network Connection Values

To get the Network connection values on most Windows computers, follow these steps:

1.Right click the Network icon on the bottom right of the screen.

2.In the pop-up menu that appears, click Status.

3.On the dialog that appears, click the Support tab.

4.On the Support Tab, click the Details button. The Network connection values are displayed.

How to set up manually

To set up your TV’s cable network connection manually, follow these steps:

1.Follow Steps 1 through 6 in the “How to set up automatically” procedure.

2.Set Internet Protocol Setup to Manual.

3.Press the ▼ button on your remote to go to the first entry field.

4.Enter the IP Address, Subnet Mask, Gateway, and

DNS Server values. Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another.

5.When done, press the RETURN button on your remote.

6.Select Network Test to check the Internet connectivity.

30 English

Loading...
+ 168 hidden pages