Samsung MWR-VH02 User Manual
ENGLISH
USER’S MANUAL
Wired Remote Control
MWR-VH02
ERV
(Energy Recovery Ventilator)
ESPAÑOLFRANÇAISITALIANOPORTUGUÊSDEUTSCH ENGLISH
DB98-30597A(1)SE F I DP
E-2
Safety Precautions
• Before using the wired remote control, read this instructions carefully.
• After reading the instructions, keep this user’s manual and installation manual
in a handy and safe place for further reference.
• Never attempt to install or move the wired remote control by yourself.
WARNING
Do not install the unit by yourself. Incorrect installation
of the unit could cause injury due to fire, electric shock or
water leakage. Consult a dealer or a qualified installer.
Install the cables with supplied cables firmly.
If the connection or fixing is incomplete, heat generation,
electric shock or fire may occur.
The first installation or reinstallation as well must be
carried out by a licensed installer or qualified personnel.
Install the unit in a place where it is strong enough
to hold the product weight. If the unit is not installed
securely, the unit may fall and it may cause injury.
If strange noises, burning smell or smoke come from the
product, disconnect the power supply immediately and
consult an authorized service personnel.
Do not attempt to repair, move, modify or reinstall the
unit on your own. Make sure that these installations are
carried out by qualified personnel to avoid electric shock
or fire.
Do not install the product in a place where it is exposed
to inflammable gas leakage.
CAUTION
Do not handle the wired remote control with wet hands.
There is a risk of electric shock.
Do not spray inflammable gas or insecticides on the
product. It may cause fire or malfunction.
Do not spill any kind of liquid into the product. If this
happen, unplug or turn the main switch of the product
off and contact an authorized service center.
Do not use the product with other purpose. It is produced
for ventilators only.
Do not use substances such as benzene, thinner or
alcohol to clean the surface of the product.
Do not install the product in the place where exposed to
sulfurous acid or steam because it may damage the parts
or cause malfunction.
Do not pull or bend the electric wires excessively.
Electric shock or loss of property may occur.
Do not press buttons with a pointed thing.
Do not give a excessive shock to the product or
disassemble it by yourself.
E-3
ENGLISH
Contents
VIEW OF THE UNIT
...........................................................................
4
GETTING STARTED
...........................................................................
5
SELECTING BY-PASS MODE
...........................................................
6
SELECTING HEAT-EX MODE
..........................................................
7
SETTING ON TIMER
..........................................................................
8
SETTING OFF TIMER
........................................................................
9
SELECTING OPTIONAL OPERATION MODE
...................................
10
E-4
View of the Unit
When controlling multiple ventilators with one ERV wired remote
control, the ERV wired remote control displays the status of one
random ventilator only. If multiple ventilators are controlled by one
ERV wired remote control only and an external controller is used to
control one of the multiple ventilators, the ERV wired remote control
will display the status of the randomly selected ventilator and it may
differ from the status of some other ventilators.
External device (Optional)
2-remote control indicator
Operation mode indicator
CO
2
sensor indicator
(Optional)
Air purifying mode indicator
(Optional)
Sleep mode indicator (Optional)
On/Off button
Mode selection button
Confirm/Cancel button
Time setting button
External control
indicator
Communication
error indicator
Centralized control
indicator
Fan speed
Filter sign indicator
Filter reset button
Fan speed
adjustment button
Set time & On/Off
timer setting
Loading...