Samsung MRK-A00, MRK-B00, MRK-A00U, MRK-B00U, MRK-B01 Installation Manual

ENGLISH

Receiver & Display Unit

INSTALLATION MANUAL
MANUAL DE INSTALACIÓN
MANUEL D’INSTALLATION
MANUALE D’INSTALLZIONE
MANUAL DE INSTALAÇÃO
INSTALLATIONS-HANDBUCH

E°XEIPI¢IO E°KATA™TA™H™

азлнкмдсаь ий млнДзйЗдЦ

ESPAÑOL

FRANÇAIS

ITALIANO

PORTUGUÊS

DEUTSCH

E§§HNIKA

RUSSIAN

System Air Conditioner

Aire acondicionado sistemático

Climatiseur numérique multifonctionnel

Sistema Aria Condizionata

Sistema Ar Condicionado

Klimaanlage System

™‡ЫЩЛМ· ∫ПИМ·ЩИЫМФ‡

лЛТЪВПМ˚И ЗУБ‰Ы¯М˚И дУМ‰ЛˆЛУМВ

E S F I P D G R A DB98-05186A(2)

MRK-A00, A00U
MRK-B00, B00U
MRK-B01, B01U

Safety Precautions

◆Read carefully this installation manual before
installation and check whether the receiver & display
unit is installed correctly after installation.

◆Do not attempt to install or repair this receiver &
display unit by yourself.

◆This receiver & display unit contains no user­serviceable parts. Always consult authorized service
personnel for repairs.

◆When moving, consult authorized service personnel
for disconnection and installation of the receiver &
display unit.

◆Ensure that the wall is strong enough to support the
weight of the receiver & display unit.

◆Must install the receiver & display unit with the wire
kit which is supplied with the unit.

◆The receiver & display unit must be installed
according to the national electrical rules by an
installation specialist.

◆When you want to disuse the receiver & display unit,
consult authorized installation center.

WARNING

E-2

This installation manual indicates you to install the receiver & display unit which
is supplied with the wireless remote controller of duct type air conditioner. For
installation of other optional accessories, see an appropriate installation manual.

CAUTION

◆

Do not use inflammable gases near the receiver &
display unit.

◆

Do not install the receiver & display unit in a location
where it will come into contact with the combustible
gases, machine oil, sulphide gas, etc.

◆

Avoid a location where acid/alkali solution or special
spray is used.

◆

Choose a location that is dry and sunny, but not
exposed to direct sunlight. Available temperature is
between 0

°C(32°F) and 39°C(102°F).

◆

Do not spill water into the receiver & display unit.

◆

Do not give tensile strength to the cable to avoid
disconnection.

◆

Do not press buttons with a pointed thing.

◆

If the receiver & display unit is installed in a hospital
or other special places, it should not affect other
electronic devices.

E-3

ENGLISH