Samsung ITP-5107S, ITP-5121D, 5000 User Manual 2

0 (0)

 

 

Home Page

 

Table of Contents

 

 

 

 

 

OfficeServ 7100

 

USER INSTRUCTIONS

TECHNICAL MANUAL

TABLE OF CONTENTS APRIL 2007

 

T A B L E O F C O N T E N T S

USER INSTRUCTIONS SECTION

PART

DESCRIPTION

PAGE

1

ENHANCED DISPLAY PROGRAMMING

 

 

1.1

OVERVIEW ...........................................................................................

1.1

 

1.2

LOCKING YOUR KEYSET ...................................................................

1.4

 

1.3

CHANGING YOUR PASSCODE .........................................................

1.5

 

1.4

CALL FORWARDING ..........................................................................

1.6

 

1.5

SETTING YOUR ANSWER MODE .....................................................

1.8

 

1.6

PROGRAMMING YOUR STATION’S NAME .......................................

1.9

 

1.7

PROGRAMMING PERSONAL SPEED DIAL LOCATIONS ..............

1.11

 

1.8

NAMING YOUR PERSONAL SPEED DIAL LOCATIONS ................

1.12

 

1.9

ADDING EXTENDERS TO KEYS .....................................................

1.13

 

1.10

CHECKING STATION STATUS ........................................................

1.14

 

1.11

CHANGING YOUR TIME AND DATE DISPLAY ...............................

1.15

 

1.12

SETTING STATION ON/OFF OPTIONS ..........................................

1.16

 

 

 

 

 

 

1.13

SELECTING A RING TONE ..............................................................

1.19

 

1.14

ALARM REMINDER ...........................................................................

1.20

 

1.15

STATION VOLUME ............................................................................

1.21

 

1.16

SETTING A PROGRAMMED MESSAGE ..........................................

1.23

 

1.17

ALARM REMINDER WITH MESSAGE .............................................

1.24

 

1.18

CALLER ID DISPLAY .........................................................................

1.25

2ITP-5112L USER GUIDE

3ITP-5121D USER GUIDE

4ITP-5107S USER GUIDE

5DS 5000 SERIES USER GUIDE

6iDCS KEYSET USER GUIDE

7STANDARD TELEPHONE USER GUIDE

8SYSTEM ADMINISTRATION AND SPECIAL FEATURES GUIDE

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

PART 1. ENHANCED DISPLAY PROGRAMMING

1.1 OVERVIEW

iDCS KEYSETS

This diagram illustrates the keys on a iDCS 28 BUTTON and a iDCS 18 BUTTON keyset that have special functions during programming. When required, these keys will be referred to by the names described in the diagram.

1.1

Samsung ITP-5107S, ITP-5121D, 5000 User Manual 2

 

 

Home Page

 

 

Table of Contents

 

 

 

 

 

 

OfficeServ 7100

 

 

USER INSTRUCTIONS

TECHNICAL MANUAL

 

 

PART 1

APRIL 2007

This diagram illustrates the keys on a iDCS 8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BUTTON keyset that have special functions

 

 

 

 

 

 

 

during programming. When required, these keys

 

 

 

 

 

 

 

will be referred to by the names described in the

 

 

 

 

 

 

 

diagram.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ITP and DS 5000 Series Keysets

This diagram illustrates the keys on an ITP 5021-D keyset. The ITP and DS 5000 keysets have keys that have special functions during programming. When required, these keys will be referred to by the names described in the diagram.

A BC D E F

1.2

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.2 LOCKING YOUR KEYSET

You can lock your keyset to prevent other people from making or receiving calls while you are away. You can unlock it when you return.

ACTION

1.Press the transfer key followed by 100 Display shows

2.Enter your passocde Default is 1234

3.Enter 1 for locking outgoing calls (Internal calls will still be allowed).

4.Enter 2 for locking all calls (Internal and external calls will not be allowed).

5.Enter 0 to unlock your phone.

DISPLAY

[201] STN LOCK PASSCODE:_

[201] STN LOCK UNLOCKED

[201] STN LOCK LOCKED OUTGOING

OR

[201] STN LOCK LOCKED ALL CALLS

[201] STN LOCK UNLOCKED

6. Press the transfer key to save and exit

1.3

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.3 CHANGING YOUR PASSCODE

Each keyset user can set or change his/her individual passcode. This passcode is used to lock or unlock keysets, for toll restriction override and to access the DISA feature.

NOTE: Default passcodes cannot be used for toll restriction override or for DISA access.

ACTION

1.Press the transfer key followed by 101 Display shows

2.Enter the existing passcode (default = 1234)

3.Enter the new passcode

4.Reenter the new passcode to verify the number If reentered correctly, display shows

DISPLAY

[201] PASSCODE OLD CODE:_

[201] PASSCODE OLD CODE:****

[201] PASSCODE NEW CODE:_

[201] PASSCODE VERIFY :SUCCESS

5. Press the transfer key to save and exit

1.4

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.4 CALL FORWARDING

The OfficeServ 7100 allows the system administrator to program the call forward destinations for other station users. This MMC also allows call forward to be set after the destination has been entered.

The OfficeServ 7100 system allows four types of call forwarding: FORWARD ALL, FORWARD NO ANSWER, FORWARD BUSY, and FORWARD DND. There is an additional option, FORWARD BUSY/NO ANSWER, that allows both of these options to be activated at the same time, provided that destinations have been entered for both. The destinations for all these forwards can be either an internal number or an external number.

0

= FORWARD CANCEL

3 = NO ANSWER

1

= ALL CALL

4 = BUSY/NO ANSWER

2

= BUSY

5 = FORWARD DND

0

= FORWARD CANCEL

This option will cancel any call forwarding set in MMC

 

 

102. It will not remove the programmed destination and

 

 

will not override any preset forward settings in MMC 316.

1

= ALL CALL

This option, when set, will forward all calls to the

 

 

programmed destination. If the programmed destination

 

 

is a station then that station can call the forwarded

 

 

station to put calls through.

2

= BUSY

This option, when set, will forward calls to the

 

 

programmed destination when the forwarded keyset is

 

 

busy.

3 = NO ANSWER

This option, when set, will forward calls to the

 

 

programmed destination if the forwarded station

 

 

does not answer a call before the forward no answer

 

 

timer in MMC 502 expires.

4

= BUSY/NO ANSWER

This option will activate both the BUSY option and the

 

 

NO ANSWER option at the same time.

5

= FWD DND

This option will forward all calls to the programmed

 

 

destination whenever the forwarded station goes into

 

 

DND.

ACTION

DISPLAY

 

 

1. Press the transfer key followed by 102

[201] FORWARD

Display shows

0:FORWARD CANCEL

1.5

 

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

2. Dial 0 – 4 to select forward type OR

Press UP or DOWN to select forward type and press RIGHT soft key to move cursor

3. Dial destination number (e.g., 201) OR

Press UP or DOWN to select destination and press RIGHT soft key to move cursor

4. Dial 1 for YES, 0 for NO OR

Press UP or DOWN to select YES or NO and press RIGHT soft key to return to step 2

[201] FORWARD 1:ALL CALL:NONE

[201] FORWARD 1:ALL CALL:205

[201] FORWARD CURENTLY SET :YES

5.Press the transfer key to store and exit

1.6

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.5 SETTING YOUR ANSWER MODE

Each keyset can have its answer mode for intercom calls set to one of the following options:

RING—The station will ring in one of eight custom ring patterns. Calls are answered by pressing the ANS/RLS key or lifting the handset.

AUTO—After giving a short attention tone, the station will automatically answer calls on the speakerphone. When a C.O. line is transferred to a station in Auto Answer, the screened portion of the call will be Auto Answer, but the keyset will ring when the transfer is complete if the user has not pressed the ANS/RLS key or lifted the handset.

VOICE—The station will not ring. After a short attention tone, callers can make an announcement. The called party must press the ANS/RLS key or lift the handset to reply.

ACTION

1.Press the transfer key followed by 103 Display shows

2.Dial 0, 1 or 2 to change the ring mode, e.g., 2 OR

Press UP or DOWN to select the ring mode

DISPLAY

[201] ANS MODE RING MODE

[201] ANS MODE VOICE ANNOUNCE

3. Press the transfer key to store and exit

1.7

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.6 PROGRAMMING YOUR STATION’S NAME

Names are written using the keypad. Each key press selects a character. Pressing the dial pad key moves the cursor to the next position. For example, if the directory name is “SAM SMITH,” press the number “7” four times to get the letter “S.” Press the number “2” once to get the letter “A.” Continue selecting characters from the table below to complete your message. Pressing the bottom left programmable key will change the letter from upper case to lower case. There are up to 11 characters that can be used. NOTE: When the character you want appears on the same dial pad key as the previous character, press the VOLUME UP or DOWN keys to move the cursor to the right or to the left.

iDCS KEYSETS and ITP KEYSETS

COUNT

1

2

3

 

4

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIAL 0

<

>

.

)

0

DIAL 1

space

?

,

!

1

DIAL 2

A

B

C

@

2

DIAL 3

D

E

F

#

3

DIAL 4

G

H

I

$

4

DIAL 5

J

K

L

%

5

DIAL 6

M

N

O

^

6

DIAL 7

P

Q

R

 

S

7

DIAL 8

T

U

V

4

8

DIAL 9

W

X

Y

 

Z

9

DIAL 4

:

=

[

 

]

4

The # key can be used for the following special characters: #, space, &, !, :, ?, ., %, $, -, <, >, /, =, [, ], @, ^, (, ), _, +, {, }, |, ;, \, " and ~.

1.When the character you want appears on the same dial pad key as the previous character, press UP to move the cursor one space to the right.

2.Other symbols are available for DIAL #.

ACTION

1.Press the transfer key followed by 104 Display shows

2.Enter the station name using the procedure described above

DISPLAY

[201] STN NAME

[201] STN NAME SAMSUNG

3. Press the transfer key to store and exit

1.8

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.7PROGRAMMING PERSONAL SPEED DIAL LOCATIONS

You can program frequently dialed telephone numbers in a personal speed dial list. Each station user begins with ten numbers 00–09 and may be assigned up to fifty numbers. See your system administrator to determine the amount assigned to your station.

NOTE: Press button B for flash and button C for pause.

Display keyset users may want to hide some speed dial numbers so they will not show in the display. Before entering a telephone number, press button E. All digits after this will be hidden. Press button E again to begin displaying digits.

If your system uses rotary (or pulse) dialing C.O. lines, pressing button D before entering a speed dial will cause all subsequent digits to be sent as DTMF tones until the D button is pressed again.

ACTION

1.Press the transfer key followed by 105 Display shows

If you have no speed dial bins, the display will be as shown

2.Dial the location number (e.g., 05)

OR

Press UP or DOWN to select the location Press the right soft key to move cursor

DISPLAY

[201] SPEED DIAL 00:

[201] SPEED DIAL SPDBLK NOT EXIST

[201] SPEED DIAL 05:_

3.Enter the trunk access code (e.g., 9) followed by the number to be dialed (e.g., 4264100)

OR

Press the left soft key to return to step 2

4.Press the F button to access the next program OR

Press the transfer key to save and exit

[201] SPEED DIAL 05:9-4264100_

1.9

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.8NAMING YOUR PERSONAL SPEED DIAL LOCATIONS

This program allows a character name to be entered for each personal speed dial location. This name enables the speed dial number to be located when using the directory dial feature. The directory dial feature allows the display keyset user to select a speed dial location by scanning its name. There are up to 11 characters that can be used.

ACTION

1.Press the transfer key followed by 106 Display shows

2.Dial the speed dial location (e.g., 01) OR

Use UP or DOWN to scroll through the location numbers and use the right soft key to move the cursor

DISPLAY

[201] SPEED NAME 00:

[201] SPEED NAME 01:_

3.Enter the location name using the procedure described in Programming Your Station’s Name

4.Press UP or DOWN to move to the next location

OR

Press the F key to program speed dial numbers

[201] SPEED NAME 01:SAMSUNG_

5. Press the transfer key to store and exit

1.10

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.9 ADDING EXTENDERS TO KEYS

This program allows you to assign key extenders to make a general access feature key more specific. The feature keys that can have extenders are listed below:

FEATURE KEY

DESCRIPTION

EXTENDER

BOSS

Boss and Secretary

1–4

DP

Direct Pickup

Extension or station group number

DS

Direct Station Select

Any extension number

FWRD

Call Forward

0–5

GPIK

Group Pickup

01–20

IG

In/Out of Group

Any group number you are part of

MMPG

Meet Me Page

0–9, 4

PAGE

Page

0–9, 4

PARK

Park (orbits)

0–9

RP

Ring Plan

1–6 or HOLD for None

SPD

Speed Dial

00–49, 500–999

PMSG

Programmed Message

01–13

DIR

Directory

PERS (1), SYS (2) or STN (3)

VT

Voice Mail Transfer

Voice Mail Group (501–519)

SG

Station Group

Any group number (500–519)

ACTION

1.Press the transfer key followed by 107 Display shows the first station

2.Enter the key number, e.g., 18

OR

Use UP and DOWN to scroll through the keys Use the right soft key to move the cursor

OR

Press the key to be programmed

DISPLAY

[201] EXT (KTS) 01:CALL1 ¤

[201] EXT (KTS) 18:DS ¤

3.Dial the extender according to above table Press the right soft key to return to step 2

OR

Press the transfer key to store and exit OR

Press the speaker key to store and advance to the next program

[201] EXT (KTS) 18:DS ¤DS207

1.11

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.10 CHECKING STATION STATUS

This program displays the following attributes of a station port. This is a read only feature.

0

PORT #

Cabinet 2 Slot 3

1

PICKUP GROUP

None, 01–20

2

SGR

Station Group Number

3

BOSS-SECR

None, 1–4

4

PAGE

Page Zone (1–4)

5

COS NO

COS (1–30) per Ring Plan (01–06)

6

TENANT GROUP

1

ACTION

DISPLAY

 

Press the transfer key followed by 108

 

 

1.

 

[201] STN STATUS

 

Display shows

 

PORT:C1-S02-P01

 

Press UP or DOWN to view the status items

 

 

2.

 

[201] STN STATUS

 

 

 

TYPE:24B US SET

3.

Press the transfer key to exit

 

 

1.12

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.11 CHANGING YOUR TIME AND DATE DISPLAY

Display keysets will always have the date and time displayed when not in use. You can select from the following display options:

0

COUNTRY

Sets overall display format and has two options

 

 

0

= ORIENTAL

MM/DD DAY HH:MM

 

 

1

= WESTERN

DAY DD MM HH:MM

1

CLOCK

Sets format of clock display and has two options

 

 

0

= 12 HOUR (Displays 1 P.M. as 01:00)

 

 

1

= 24 HOUR (Displays 1 P.M. as 13:00)

2

DISPLAY

Sets format of DAY and MONTH display and has two options

 

 

0

= UPPER CASE (Displays Friday as FRI and March as MAR)

 

 

1

= LOWER CASE (Displays Friday as Fri and March as Mar)

ACTION

1.Press the transfer key followed by 109 Display shows

2.Press UP or DOWN to select the display mode Press the right soft key to move the cursor

3.Press the right soft key to return to step 2

OR

Press the left soft key to return to step 3

DISPLAY

[201] DAY FORMAT COUNTRY:WESTERN

[201] DAY FORMAT COUNTRY:ORIENTAL

4. Press the transfer key to store and exit

1.13

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.12 SETTING STATION ON/OFF OPTIONS

The OfficeServ 7100 allows the system administrator to set any of the keyset features listed below.

 

FEATURES

DESCRIPTION

 

 

 

 

AUTO HOLD

Automatically places an existing C.O. call

00

on hold if a CALL button, trunk key or trunk

 

 

route key is pressed during that call.

01

AUTO TIMER

Automatically starts the stopwatch timer

during a C.O. call.

 

 

 

 

When ON, this feature disables the

02

HEADSET USE

hookswitch allowing a headset user to

answer all calls by pressing the ANS/RLS

 

 

 

 

button.

 

 

When ON, this feature allows the user to

03

HOT KEYPAD

dial directory numbers without having to

 

 

first lift the handset or press the SPK button.

04

KEY TONE

Allows the user to hear a slight tone when

pressing buttons on keyset.

 

 

 

 

Allows the user to hear the latter part of

05

PAGE REJOIN

page announcements if keyset becomes

 

 

free during a page.

 

 

When OFF, requires the user to press the

06

RING PREF.

fast flashing button to answer a ringing call

 

 

after lifting the handset.

07

NOT FOR USA

This field is reserved and can not be used

for U.S. software.

 

 

 

 

Keyset users can allow intercom calls to

08

AUTO CAMP-ON

camp-on to other keysets without having to

 

 

press a CAMP-ON key.

09

NOT FOR USA

 

 

 

 

 

 

If this option is set to YES, station users

10

AME PASSCODE

who have AME set must enter their station

 

 

password to listen to messages being left.

 

 

If this option is set to ON the user will have

11

DISP SPD NAME

the name associated with the speed dial

number shown in the display after the

 

 

 

 

number has been dialed.

 

 

If this setting is set to OFF the CID review

 

 

list will only store CID information for calls

12

CID REVIEW ALL

that were not answered at the station and

 

 

reject the information for calls that were

 

 

answered.

1.14

 

 

 

 

Home Page

 

 

 

Table of Contents

 

 

 

 

 

 

OfficeServ 7100

 

 

USER INSTRUCTIONS

TECHNICAL MANUAL

 

PART 1

APRIL 2007

 

 

 

 

 

 

 

 

 

 

 

 

FEATURES

DESCRIPTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When set to OFF an OHVA will be heard

 

 

13

SECURE OHVA

through the keyset speaker rather than the

 

 

 

 

handset.

 

 

 

 

 

 

14

NOT FOR USA

 

 

 

 

 

 

 

 

 

 

This option determines whether CO calls

 

 

 

15

AUTO ANS CO

arriving at a station will be auto answered if

 

 

 

 

auto answer is selected in MMC 103.

 

 

 

 

 

 

 

 

For ITP phones with 2 Line Display

 

 

 

 

 

Set to ON will require user to press SEND

 

 

16

ENBLOCK 2LED

button to make a call, it works like a cell

 

 

 

 

phone. Enblock dialing must be enabled in

 

 

 

 

MMC 861.

 

 

 

 

 

 

17

STN NO RING

When ON all incoming calls will not ring at

 

 

 

stations.

 

 

 

 

 

 

 

 

 

 

 

 

 

ACTION

1.Press the transfer key followed by 110 Display shows

2.Dial the option number from above list (e.g., 4)

Press UP or DOWN to select the option and

Press the right soft key to move the cursor

3.Press UP or DOWN to select ON or OFF Press the left or right soft key to return to step 2

OR

Dial 1 for ON or 0 for OFF

If option 00 from above list is dialed at Step 2

If option 01 from above list is dialed at Step 2

If option 02 from above list is dialed at Step 2

If option 03 from above list is dialed at Step 2

DISPLAY

[201] STN ON/OFF AUTO HOLD :OFF

[201] STN ON/OFF HOT KEYPAD :OFF

[201] STN ON/OFF HOT KEYPAD :ON

[201]STN ON/OFF

AUTO HOLD

:OFF

[201] STN ON/OFF AUTO TIMER :OFF

[201] STN ON/OFF HEADSET USE :ON

[201]STN ON/OFF

HOT KEYPAD

:ON

1.15

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

If option 04 from above list is dialed at Step 2

If option 06 from above list is dialed at Step 2

If option 07 from above list is dialed at Step 2

If option 08 from above list is dialed at Step 2

If option 10 from above list is dialed at Step 2

4.Press UP or DOWN to select ON or OFF Press the left or right soft key to return to Step 2

[201]STN ON/OFF

KEY TONE

:ON

[201]STN ON/OFF

RING PREF

:ON

[201] STN ON/OFF DISPLAY :TIME

[201] STN ON/OFF AUTO CAMPON :ON

[201] STN ON/OFF AME PASSCODE :ON

[201] STN ON/OFF HOT KEYPAD :ON

5. Press transfer to store and exit

1.16

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.13 SELECTING A RING TONE

Each keyset user can select one of eight ring frequencies.

ACTION

1.Press the transfer key followed by 111 Display shows

2.Dial 1–8 to select the ring tone

OR

Press UP or DOWN to select the ring tone Press the right soft key to move the cursor

DISPLAY

[201] RING TONE SELECTION 6

[201] RING TONE SELECTION 5

3. Press the transfer key to store and exit

1.17

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.14 ALARM REMINDER

Station users can have three alarms programmed at their phones. Each alarm may be one of the following three types:

0.

NOTSET

The alarm is not set.

1.

TODAY ONLY

The alarm will ring at the programmed time and be canceled

 

 

automatically.

2.

DAILY

The alarm will ring each day at this time.

 

ACTION

 

DISPLAY

 

 

Press the transfer key followed by 112

 

 

1.

 

[201] ALM CLK(1)

 

Display shows

 

 

HHMM:

¤NOTSET

 

Dial 13 to select the alarm (e.g., 2)

 

 

2.

 

[201] ALM CLK(2)

 

OR

 

 

HHMM:

¤NOTSET

 

 

 

 

 

 

Press UP or DOWN to select alarm

Press the right soft key to move the cursor

OR

Press the left soft key to return to step 2

3.Enter alarm time in 24 hour format (e.g., 1300) Display automatically advances to step 5

4.Enter alarm type (e.g., 2)

OR

Press UP or DOWN to select alarm type Press the right soft key to move the cursor and return to step 2

[201] ALM CLK (2) HHMM:1300¤NOTSET

[201] ALM CLK HHMM:1300¤DAILY

5. Press the transfer key to store and exit

1.18

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.15 STATION VOLUME

This procedure allows users to view and set the level of the volume for your keyset.

0.

RING VOLUME

Set a level for your keyset ring volume. There are eight levels of

 

 

volume; level 1 is the lowest and level 8 is the highest.

1.

OFF-RING VOL

Set a level for your keyset off-hook ring volume. There are eight

 

 

levels of volume; level 1 is the lowest and level 8 is the highest.

2.

HANDSET VOL

Set a level for your keyset handset volume. There are eight

 

 

levels of volume; level 1 is the lowest and level 8 is the highest.

3.

SPEAKER VOL

Set a level for your keyset speaker volume. There are sixteen

 

 

levels of volume; level 1 is the lowest and level 16 is the highest.

4.

BGM VOLUME

Set a level for your keyset background music volume. There are

 

 

sixteen levels of volume; level 1 is the lowest and level 16 is the

 

 

highest.

5.

PAGE VOLUME

This is the volume you will hear internal page over the keyset

 

 

speaker when your keyset is idle and BGM is turned on. There

 

 

are 16 volume levels: level 1 is the lowest and level 16 the

 

 

highest.

ACTION

1.Press the transfer key followed by 114 Display shows

2.Dial 1-8 to select the volume to change

OR

Press UP or DOWN to select the volume to change

Press the right soft key to move the cursor

DISPLAY

[201] STN VOLUME RING VOLUME :OFF

[201] STN VOLUME OFF-RING VOL:OFF

3. Press UP or DOWN to select ON or OFF

[201] STN VOLUME

Press the left or right soft key to return to step 2

OFF-RING VOL:ON

 

 

OR

Dial 1 for ON or 0 for OFF

 

 

 

If option 0 from above list is dialed at step 2

[201] STN VOLUME

 

RING VOLUME :4

1.19

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

If option 1 from above list is dialed at step 2

If option 2 from above list is dialed at step 2

If option 3 from above list is dialed at step 2

If option 4 from above list is dialed at step 2

[201] STN VOLUME OFF-RING VOL:4

[201] STN VOLUME HANDSET VOL:4

[201] STN VOLUME SPEAKER VOL:13

[201] STN VOLUME BGM VOLUME :13

4. Press the transfer key to store and exit

1.20

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.16 SETTING A PROGRAMMED MESSAGE

When you will be away from your phone for any length of time, you can leave a programmed message. Display stations calling you will see this message and be informed of your status or follow your instructions.

ACTION

1.Press the transfer key followed by 115 Display shows

2.Dial 0020 to select message number, e.g., 05

OR

Press UP or DOWN to select message

3. Press the left or right soft key to return to step 2 OR

Press the transfer key to store and exit

DISPLAY

[201] PGMMSG(00) CANCEL VAC MSG

[201] PGMMSG(05) PAGE ME

1.21

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.17 ALARM REMINDER WITH MESSAGE

Station users can have three alarms programmed at their phones. Each alarm may be one of the following three types:

0.

NOTSET

The alarm is not set.

1.

TODAY ONLY

The alarm will ring at the programmed time and be canceled

 

 

automatically.

2.

DAILY

The alarm will ring each day at this time.

In addition, each alarm may be accompanied by a 16 character message that will be displayed while the alarm is ringing.

NOTE: These are the same three alarms described in Alarm Reminder. This procedure allows a message to be added. A display keyset is necessary to view messages.

ACTION

1.Press the transfer key followed by 116 Display shows

2.Dial 13 to select the alarm (e.g., 2) OR

Press UP or DOWN to select the alarm Press the right soft key to move the cursor

3.Enter the alarm time in 24 hour clock format (e.g., 1300)

Display automatically advances to step 4

4.Dial the valid entry from the above list for the alarm type

OR

Press UP or DOWN to select the alarm type Press the right soft key to move the cursor

5.Enter messages using the method in

Programming Your Station’s Name

Press the right soft key to return to step 2

DISPLAY

[201] ALM REM(1) HHMM: ¤NOTSET

[201] ALM REM(1) HHMM: ¤NOTSET

[201] ALM REM (2) HHMM:1300¤NOTSET

[201] ALM REM HHMM:1300¤DAILY

[201] ALM REM TAKE MEDICATION

6. Press the transfer key to store and exit

1.22

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

1.18 CALLER ID DISPLAY

The station user can change the order in which the CLI, Caller ID and/or ANI information is displayed on an LCD set during a transferred call.

CLI display options are the following:

0.

NO DISPLAY

No CLI data will be displayed.

1.

NUMBER FIRST

The CLI number received from the Central Office will be

 

 

displayed first.

2.

NAME FIRST

The CLI name received from the Central Office will be

 

 

displayed first.

Caller ID display options are the following:

0.

NO DISPLAY

No CID data will be displayed.

1.

NUMBER FIRST

The CID number received from the Central Office will be

 

 

displayed first.

2.

NAME FIRST

The CID name received from the Central Office will be

 

 

displayed first.

ANI display options are the following:

0.

NO DISPLAY

No ANI data will be displayed.

1.

NUMBER FIRST

The ANI number received from the Central Office will be

 

 

displayed first.

2.

NAME FIRST

Since there is no name sent by the Central Office, The only

 

 

time you will receive a name is when your service company

 

 

has programmed a name to be associated with the number

 

 

otherwise your display will read “no ANI name”.

ACTION

DISPLAY

1. Press the transfer key followed by 119

 

 

 

[201] CID DISP

Display shows

 

NUMBER FIRST

 

 

 

1.23

 

Home Page

 

 

Table of Contents

 

 

 

 

OfficeServ 7100

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1

APRIL 2007

 

2. Dial 0 or 1 to select CID or ANI OR

Press UP or DOWN to select CID or ANI and press the right soft key

3. Dial display option 0, 1 or 2, e.g., 2 OR

Press UP or DOWN to select option

[201] ANI DISP NUMBER FIRST

[201] CID DISP NAME FIRST

4. Press the transfer key to store and exit

1.24

ITP-5112L User Guide

For OfficeServ100, OfficeServ500,

OfficeServ7000 Series

04/2007

Copyright 2006 Samsung Telecommunications America.

All rights reserved. No part of this manual may be reproduced in any form or by any means—graphic, electronic or mechanical, including recording, taping, photocopying or information retrieval systems— without express written permission of the publisher of this material.

Samsung Telecommunications America reserves the right without prior notice to revise information in this guide for any reason. Samsung Telecommunications America also reserves the right without prior notice to make changes in design or components of equipment as engineering and manufacturing may warrant. Samsung Telecommunications America disclaims all liabilities for damages arising from the erroneous interpretation or use of information presented in this guide.

TABLE OF CONTENTS

 

ABOUT THIS BOOK ....................................................................................

1

THINGS YOU SHOULD KNOW ................................................

2–8

ASSEMBLING YOUR KEYSET ........................................................

9

ITP-5112L SETUP ........................................................................................

10

Initializing the ITP-5112L............................................................................................................

10

IP Setup Menu ................................................................................................................................

10

Menu Structure ..............................................................................................................................

11

Navigating the Menus ................................................................................................................

12

Setting the Network Parameters ............................................................................................

12

OUTSIDE CALLS

 

Making an Outside Call ..............................................................................................................

16

Dialing from the Outgoing / Incoming Menu ....................................................................

17

Dialing the Most Recent Outgoing / Incoming Number ..............................................

17

Making Calls from the Call Log ................................................................................................

17

Answering a Call ..........................................................................................................................

17

Universal Answer ..........................................................................................................................

18

Recall Dial Tone ............................................................................................................................

18

Sending a Flash..............................................................................................................................

18

Busy Line Queuing with Callback ..........................................................................................

18

Canceling Callback........................................................................................................................

19

INTERCOM CALLS

 

Calling Other Stations ................................................................................................................

20

Dialing the Most Recent Outgoing / Incoming Number................................................

20

Answering Intercom Calls ..........................................................................................................

20

Voice Announce Mode................................................................................................................

20

Auto Answer Mode ......................................................................................................................

21

Busy Station Callback ..................................................................................................................

21

Busy Station Camp-On ................................................................................................................

21

Calling your System Operator ..................................................................................................

22

CALL PROCESSING

 

System Hold ....................................................................................................................................

23

Exclusive Hold ................................................................................................................................

23

Remote Hold ..................................................................................................................................

23

Hold Recall ......................................................................................................................................

24

Consultation Hold ........................................................................................................................

24

Retrieving Calls Held at Another Station..............................................................................

24

Transferring Calls ..........................................................................................................................

25

Transfer with Camp-On ..............................................................................................................

25

Transfer to Voicemail....................................................................................................................

26

Call Waiting......................................................................................................................................

26

Conference Calls ............................................................................................................................

26

Conference Splitting ....................................................................................................................

27

Conference Groups ..............................................................................................................

27–28

Forwarding Calls ....................................................................................................................

28-29

Call Forward Options ..................................................................................................................

29

Station Call Pickup........................................................................................................................

30

Group Call Pickup..........................................................................................................................

30

My Group Pickup ..........................................................................................................................

30

Privacy Release ..............................................................................................................................

30

DIALING FEATURES

 

Speed Dialing ................................................................................................................................

31

Programming Personal Speed Dial Numbers ....................................................................

32

One Touch Speed Dialing ..........................................................................................................

33

Directory Dialing ..........................................................................................................................

33

Last Number Redial ......................................................................................................................

34

Manual Retry with Redial ..........................................................................................................

34

Save Number with Redial ..........................................................................................................

34

Automatic Redial/Retry ..............................................................................................................

35

Pulse to Tone Changeover ........................................................................................................

35

Memo Redialing ............................................................................................................................

35

PAGING AND MESSAGING

 

Making an Internal Page ............................................................................................................

36

Making an External Page............................................................................................................

36

All Page ............................................................................................................................................

36

Meet Me Page ................................................................................................................................

36

Call Park and Page ........................................................................................................................

37

Messages—Set and Cancel ......................................................................................................

38

Returning Messages ....................................................................................................................

38

Programmed Messages ..............................................................................................................

39

CONVENIENCE FEATURES

 

Do Not Disturb ..............................................................................................................................

40

One Time DND ..............................................................................................................................

40

Mute ..................................................................................................................................................

40

Background Music ........................................................................................................................

40

Established Call Pick-Up ............................................................................................................

41

Appointment Reminder/Alarm Clock....................................................................................

41

Door Phone Calls ....................................................................................................................

43-44

Executive/Secretary Hotline......................................................................................................

44

Group Listening ............................................................................................................................

46

Account Codes ..............................................................................................................................

46

Locking Your Keyset ....................................................................................................................

46

Manual Signalling ........................................................................................................................

47

Off-Hook Voice Announce ........................................................................................................

47

OHVA Block......................................................................................................................................

48

OHVA Reject ....................................................................................................................................

48

In Group/Out of Group ..............................................................................................................

48

CUSTOMIZING YOUR KEYSET

 

AME Password ................................................................................................................................

49

Auto Camp-On ..............................................................................................................................

49

Select Ring Tone ............................................................................................................................

50

Change Your Passcode ................................................................................................................

50

Set Answer Mode (Intercom)....................................................................................................

51

Set Answer Mode (CO) ................................................................................................................

51

Automatic Hold..............................................................................................................................

51

Headset Operation ......................................................................................................................

52

Hot Keypad......................................................................................................................................

52

Key Confirmation Tone................................................................................................................

53

Rejoining a Page............................................................................................................................

53

Ring Preference..............................................................................................................................

53

Auto Answer CO Calls..................................................................................................................

54

Display Speed Dial Name ..........................................................................................................

54

Caller ID Review All ......................................................................................................................

55

Secure OHVA ..................................................................................................................................

55

DISPLAY FEATURES

 

Directory Information ................................................................................................................

56

Call Log ............................................................................................................................................

56

Dial by Name ..................................................................................................................................

57

Call Progress Displays ..................................................................................................................

57

Display Number Dialed ..............................................................................................................

58

Call Duration Timer ......................................................................................................................

58

Auto Timer ......................................................................................................................................

58

Timer Function ..............................................................................................................................

58

Viewing Message Indications ..................................................................................................

59

Personal Speed Dial Names ......................................................................................................

59

Station Names................................................................................................................................

59

Managing Key Assignments ....................................................................................................

59

LCR with Clear ................................................................................................................................

60

Backspace with LCR......................................................................................................................

60

Text Messaging ......................................................................................................................

60–61

CALLER ID ............................................................................................................

62

Selecting your Caller ID Display ..............................................................................................

62

Viewing the Next Caller ID Call................................................................................................

62

Saving the Caller ID Number ....................................................................................................

62

Redialing a Saved Caller ID Number......................................................................................

62

Storing a Caller ID Number ......................................................................................................

63

Inquire Caller ID Park/Hold Info ..............................................................................................

63

Reviewing Past Caller ID Calls ..................................................................................................

64

APPLICATION PROGRAM MENUS ........................................

65

PhoneBook......................................................................................................................................

65

E-Diary ..............................................................................................................................................

65

Message............................................................................................................................................

66

Sound/Screen ................................................................................................................................

67

Call Forward....................................................................................................................................

67

Setup ................................................................................................................................................

67

My Phone ........................................................................................................................................

69

Samsung Voicemail..................................................................................

70

Accessing your Mailbox ..............................................................................................................

71

Subscriber Services Menu Diagram ................................................................................

72–73

Getting Started .............................................................................................................................

74

Listen to your Messages.............................................................................................................

74

Subscriber Services Menu .........................................................................................................

74

Listening to Old or New Messages ........................................................................................

75

Group New or Old Messages....................................................................................................

76

Record and Send a Message ....................................................................................................

76

Access Manager ............................................................................................................................

77

Personal Greetings ......................................................................................................................

79

Mailbox Administration..............................................................................................................

81

Message Broadcast ....................................................................................................................

83

Personal Services ........................................................................................................................

84

Personal Administration Settings ..........................................................................................

85

Keyset User Features ..................................................................................................................

86

Shortcuts ........................................................................................................................................

88

Interactive Displays ......................................................................................................................

88

PERSONAL SPEED DIAL NUMBERS ............................

89–90

ABOUT THIS BOOK

Samsung’s new OfficeServ technology keyset model ITP-5112L is part of the OfficeServ 100, OfficeServ 500, and OfficeServ 7000 Series.

The ITP-5112L IP keyset represents a new concept of Internet phone, in that it uses an IP address to Send/Receive voice and data. For voice communications, the ITP5112L uses the data network line already in place in most offices and increasing number of homes.

The ITP-5112L IP keysets also incorporate a large LCD color screen, which provides important information for the user, to make using the keyset easier and more convenient.

Please take the time to study this guide and to become familiar with the operation of your keyset. Keep this guide handy, as you may need to look up instructions for infrequently used features.

This book is written based on factory default settings, for the feature access codes. Sometimes, due to programming requirements, these codes may be changed. If you find that a feature code does not work as described in this book, please contact your installation and service company to determine the correct code.

1

THINGS YOU SHOULD KNOW

USER ORIENTATION

The ITP model telephones are called “IP keysets”. The IP keyset incorporates buttons or “keys” that are used to access or activate the many features of your office phone system. The lower five buttons (ten total) that reside on either side of the Large Display screen are programmable buttons. This means they can be programmed for a specific function on your keyset and that same button can be something different on another keyset. See the system manager to get your most frequently used features assigned to your programmable buttons.

The top button on either side of the Large Display Screen scrolls through the various levels of the programmable button display screens.

Lines from the telephone company are “C.O. lines”. Calls on these lines are referred to as “outside calls”. Your system can have individual C.O. line buttons or lines may be assigned to groups. When they are in a group, you access a line by dialing an access code or pressing a route button. For example, dial 9 or press a “LOCAL” button to get a local outside line. If Least Cost Routing is used, pressing the “LCR” button will automatically select a preprogrammed C.O. line according to what digits are dialed. Each line in the system is numbered, beginning with 701, then 702, 703, etc.

Direct Station Selection (DSS) buttons are programmed to ring specific stations. You can press a DSS button instead of dialing the extension number.

The 5112L keyset provides distinctive ring patterns:

Outside calls have a single ring tone repeated.

Internal calls have a double ring tone repeated.

Door phone calls and alarm/appointment reminders have a triple ring tone repeated.

FULL DUPLEX SPEAKERPHONE

All ITP keysets are speakerphones. Pressing the SEND button will answer an incoming call on the speakerphone. Pressing the END button will release the call on the speakerphone.

Switching from the handset to the speakerphone is easy. Press the SPEAKER button and hang up the handset.

TERMINAL STATUS INDICATOR

The terminal status indicator light is positioned on the top right corner of the keyset above the display. The terminal status indicator is a tri-colored (red, green, and amber) light that provides greater visibility of your keysets status than the individual button LEDs. The terminal status indicator provides the following indications:

Busy/Off Hook

Steady Red

Intercom Ring

Flashing Red

Outside Call Ring

Flashing Blue

Recall Ring

Flashing Amber

Message Waiting

Flashing Red

Do Not Disturb

Fast Flash Red at 1 Second Intervals

SELECT BUTTONS

The 5112L keysets incorporate twelve select buttons. These buttons are positioned six on either side of the LCD screen.

The top left and right buttons are used to page up and page down screens.

The remaining five buttons on either side of the display are programmable. There are ten programmable buttons per programmable feature screen, with the exception of the last screen, which has nine programmable buttons. The total programmable buttons per 5112L station is ninety-nine. Any system feature or function can be assigned to these buttons.

VOLUME CONTROLS

The 5112L keysets use the UP and DOWN buttons to adjust the ringer volume while the keyset is ringing, the speaker volume while the speakerphone is in use and the handset volume while you are listening. These three levels will be stored in memory until changed. If background music is turned on at your keyset, the volume buttons will also control the level of music. The volume of pages heard through the speaker of a keyset can be adjusted during a page announcement by using the volume buttons.There are 16 levels for each volume setting.The volume of off-hook ring is controlled by a user-programmable setting.

2

3

Loading...
+ 259 hidden pages