Samsung DW50K4050BB, DW50K4030FW, DW50K4030BB, DW50K4010BB, DW50K4030FS User Manual

Dishwasher

user manual

DW50K4050BB DW50K4030BB

DW50K4030FS

DW50K4030FW

DW50K4010BB

imagine the possibilities

Thank you for purchasing this Samsung product.

DW4000KM-00000A-00_EN (Basic)_160323.indd 1

Contents

SAFETY INFORMATION

OPERATION INSTRUCTION

PRIOR USING FOR THE FIRST TIME

LOADING THE DISHWASHER RACKS

STARTING A WASHING PROGRAMME

MAINTENANCE AND CLEANING

5 Hydrogen gas is explosive 5 Proper use 6 Disposal 6 Instruction about the WEEE mark

7 Control panel 10 Displays 12 Dishwasher features

13 Set the water softener 14 Loading the salt into the softener 15 Fill the rinse aid dispenser 15 Rinse aid dispenser 16 Function of detergent

19 Loading the upper basket 20 Loading the lower basket 21 Cutlery basket and fork shelf 22 For washing in the dishwasher the following

cutlery/dishes

24 Wash cycle table 26 Turning on the appliance 27 Change the programme 27 Forget to add dish 27 Unloading the dishwasher

28 Filtering system 28 Filter assembly 29 Cleaning the spray arms 29 Caring for the dishwasher 29 Protect against freezing 29 Cleaning the door 30 How to keep your dishwasher in shape

INSTALLATION INSTRUCTION

TROUBLESHOOTING TIPS

31 Positioning and leveling 31 Connecting the water and electricity supplies 34 Built-in dishwasher 39 Start of dishwasher

40 Error codes 41 Before calling for service

APPENDIX

43 Speciﬁcations 43 Product dimension

2_ Contents

DW4000KM-00000A-00_EN (Basic)_160323.indd 2DW4000KM-00000A-00_EN (Basic)_160323.indd 2 2016-03-23  1:14:272016-03-23  1:14:27

Safety information

Please read this User Information carefully and keep it to refer to at a later date. Pass it on to any subsequent owner of the appliance.

This manual contains sections of Safety Instructions, Part and Features, Installation your dishwasher and Troubleshooting etc.

Carefully reading it before using the dishwasher will help you to use and maintain the dishwasher properly.

The manufacturer, following a policy of constant development and up-dating of the product, may make modiﬁcations without giving prior notice.

WARNING: When using your dishwasher, follow the below basic precautions including the following:

1. This appliance is not to be used by persons (including

children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

2. For use in Europe: This appliance can be used by

children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

01 SAFETY INFORMATION

3. Children should be supervised to ensure that they do not

play with the appliance.

4. If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly qualiﬁ ed persons in order to avoid a hazard.

READ AND FOLLOW THIS SAFETY INFORMATION

CAREFULLY SAVE THESE INSTRUCTIONS

Safety information _3

DW4000KM-00000A-00_EN (Basic)_160323.indd 3DW4000KM-00000A-00_EN (Basic)_160323.indd 3 2016-03-23  1:14:272016-03-23  1:14:27

Safety information

5. The new hose-sets supplied with the appliance are to be

used and that old hose-sets should not be reused.

6. For appliances with ventilation openings in the base, that

a carpet must not obstruct the openings.

7. For use in Europe: Children of less than 3 years should

be kept away unless continuously supervised.

8. CAUTION: In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly

by the utility.

9. This appliance is intended to be used in household and

similar applications such as:

ces and other working

environments;

– farm houses; – by clients in hotels, motels and other residential type

environments;

– bed and breakfast type environments.

10. The door should not be left in the open position since

this could present a tripping hazard.

11. WARNING: Knives and other utensils with sharp points

must be loaded in the basket with their points down or placed in a horizontal position.

12. Please do not overload your dishwasher. There is only

space for 9 standard dishes.Do not use dish that is not suitable for dishwashers.This is important for good results and for reasonable energy consumption.

READ AND FOLLOW THIS SAFETY INFORMATION

CAREFULLY SAVE THESE INSTRUCTIONS

4_ Safety information

DW4000KM-00000A-00_EN (Basic)_160323.indd 4

Hydrogen gas is explosive

Under certain conditions, Hydrogen gas may be produced in a hot-water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for such a period, before using the dishwasher turn on all hot-water faucets and let the water ﬂow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is ﬂammable, do not smoke or use an open ﬂame during this time.

Proper use

• Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.

• Do not operate your dishwasher unless all enclosure panels are properly in place. Open the door very carefully if the dishwasher is operating. There is a risk of water squirting out.

• Do not place any heavy objects of stand on the door when it is open. The appliance could tip forward.

• When loading items to be washed:

- Locate sharp items so that they are not likely to damage the door seal;

- Load sharp knives with the handles up to reduce the risk of cut-type injuries;

• Warning : knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position.

• Check that the detergent receptacle is empty after completion of the wash cycle.

• Do not wash plastic items unless they are marked dishwasher safe or the equivalent. For plastic items not so marked, check the manufacturer’s recommendations.

• Use only detergent and rinse additives designed for an automatic dishwasher. Never use soap, laundry detergent, or hand washing detergent in your dishwasher.

• Other means for disconnection from the supply must be incorporated in the ﬁxed wiring with at least 3 mm contact separation in all poles.

• Keep children away from detergent and rinse aid, keep children away from the open door of the dishwasher, there could still be some detergent left inside.

• Young children should be supervised to ensure that they do not play with the appliance.

• The appliance is not intended for use by young children or inﬁrm persons without supervision.

• Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open.

• The door should not be left in the open position since this could present a tripping hazard.

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualiﬁed person in order to avoid a hazard.

• Please dispose of packing materials properly.

• Use the dishwasher only for its intended function.

• During installation, the power supply must not be excessively or dangerously bent or ﬂattened.

• Do not tamper with controls.

• The appliance is to be connected to the water mains using new hose sets and the old hose-sets should not be reused.

01 SAFETY INFORMATION

READ AND FOLLOW THIS SAFETY INFORMATION

CAREFULLY SAVE THESE INSTRUCTIONS

Safety information _5

DW4000KM-00000A-00_EN (Basic)_160323.indd 5DW4000KM-00000A-00_EN (Basic)_160323.indd 5 2016-03-23  1:14:272016-03-23  1:14:27

Safety information

Disposal

Dispose of the dishwasher packaging material correctly. All packaging materials can be recycled. Plastic parts are marked with the standard international abbreviations:

PE for polyethylene, e.g. sheet wrapping material PS for polystyrene, e.g. padding material POM polyoxymethylene, e.g. plastic clips PP polypropylene, e.g. Salt ﬁller ABS Acrylonitrile Butadiene Styrene, e.g. Control Panel.

WARNING: Packaging material could be dangerous for children!

For disposing of package and the appliance please go to a recycling centre. Therefore cut o the power supply cable and make the door closing device unusable. Cardboard packaging is manufactured from recycled paper and should be disposed in the waste paper collection for recycling. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city oce and your household waste disposal service.

Instruction about the WEEE mark

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government oce, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

For information on Samsung’s environmental commitments and product speciﬁc regulatory obligations e.g. REACH visit: samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html

READ AND FOLLOW THIS SAFETY INFORMATION

CAREFULLY SAVE THESE INSTRUCTIONS

6_ Safety information

DW4000KM-00000A-00_EN (Basic)_160323.indd 6DW4000KM-00000A-00_EN (Basic)_160323.indd 6 2016-03-23  1:14:272016-03-23  1:14:27

Operation instruction

Control panel

DW50K4030FS/FW

02 OPERATION INSTRUCTION

1 POWER Press this button to turn on your dishwasher : the screen lights up.

2 Program To select washing program press this button.

To select Half load function. (With this Half load function you can only use it

3 Half load

4 Delay start

5 Display Running indicator, delay time, error codes and etc.

6 Rinse Add

7 Hygiene

Multi tab

(Control lock)

9 START (Reset)

• When the door is open only the POWER button will operate.

• You can select options (Multi in 1, Delay start, Half load, Hygiene and Rinse Add) before

starting a cycle.

when you have only about or less than 5 place setting dishware, and you will see less water and energy consumption. It can only be used with all program except Pre Wash.)

Press this button to set the delayed hours for washing. You can delay the start of washing up to 24 hours. One press on this button delays the start of washing by one hours.

To select Rinse Add function, you can use it when you want to add once rinse after the program. It can be used with all program expect Pre Wash.

Push the Hygiene button for the best possible hygiene in your dishwasher. At the ﬁnal rinse it heat up to 67 °C and hold this temperature for a several minutes. This function is available with all program except Pre Wash.

To select Multi in 1 option which needs salt and rinse aid but a Multi in 1 tablet. This option can be used with all program except Pre Wash. Another option allows you to lock the buttons on the control panel so children cannot accidentally start the dishwasher by pressing the buttons on the panel. To lock and unlock the buttons on the control panel, hold down both the Multi in 1 button for (3) seconds.

In power on condition, close the dishwasher door and select the cycle and desired options. Press the START button to begin the cycle.

When you want to pause the dishwasher while running, press the START button and make sure to open the door slowly and carefully.

You can reset the machine by pressing the START button for 3 seconds during washing. After reset, the dishwasher goes to the initial state except salt consumption setting of water softener.

5 94 8

Operation Instruction _7

DW4000KM-00000A-00_EN (Basic)_160323.indd 7DW4000KM-00000A-00_EN (Basic)_160323.indd 7 2016-03-23  1:14:272016-03-23  1:14:27

Operation instruction

DW50K4050BB

3 4 5 10 116 8 971 2

DW50K4030BB

DW50K4010BB

1 POWER Press this button to turn on your dishwasher : the screen lights up.

2 Cycle To select washing program press this button.

When you select Upper, only the upper rack nozzle is activated. The lower nozzle will not operate.

Use this feature to wash a small load of dishes or glasses placed in the upper

3 Upper

4 Lower

5 Hygiene

6 Rinse Add

7 Multi tab

8 Control lock

rack.

When you select Upper, place dishes, glasses, etc. in the upper rack only. The dishwasher will not wash items placed in the lower rack.

Selecting Upper reduces both the cycle time and the amount of electricity consumed.

When you select Lower, only the lower rack nozzle is activated. The upper nozzle will not operate.

Use this feature to wash a small load of dishes or glasses placed in the lower rack.

When you select Lower, place items, glasses, etc. in the lower rack only. The dishwasher will not wash items placed in the upper rack.

Selecting Lower reduces both the cycle time and the amount of electricity consumed.

To select Rinse Add function, you can use it when you want to add once rinse after the program. It can be used with all program expect Pre Wash.

To select Multi in 1 option which needs salt and rinse aid but a Multi in 1 tablet. This option can be used with all program except Pre Wash.

Control lock option allows you to lock the buttons on the control panel so children cannot accidentally start the dishwasher by pressing the buttons on the panel.

8_ Operation Instruction

DW4000KM-00000A-00_EN (Basic)_160323.indd 8

If Rinse Reﬁll or Salt Reﬁll indicator is lit, it means rinse or salt is needed to reﬁll.

Salt Reﬁll Indicator

• If the “Salt Reﬁll” indicator is lit, it means the dishwasher is low on

dishwasher salt and needs to be reﬁlled.

9 Indicator

Rinse Reﬁll Indicator

• If the “Rinse Reﬁll” indicator is lit, it means the dishwasher is low on

dishwasher rinse aid and requires a reﬁll.

Control lock Indicator

• If the “Control lock” indicator id ﬁt, it means the dishwasher is

locked, you cannot do any operate.

Press this button to set the delayed hours for washing. You can delay the

10 Delay start

start of washing up to 24 hours. One press on this button delays the start of washing by one hours.

In power on condition, close the dishwasher door and select the cycle and desired options. Press the START button to begin the cycle.

When you want to pause the dishwasher while running, press the START

11 START (Reset)

button and make sure to open the door slowly and carefully. You can reset the machine by pressing the START button for 3 seconds

during washing. After reset, the dishwasher goes to the initial state except salt consumption setting of water softener.

• When the door is closed only the POWER button will operate.

• You can select options (Multi tab, Half load, Delay, Hygiene and Rinse Add) before starting a

cycle.

02 OPERATION INSTRUCTION

Operation Instruction _9

DW4000KM-00000A-00_EN (Basic)_160323.indd 9DW4000KM-00000A-00_EN (Basic)_160323.indd 9 2016-03-23  1:14:282016-03-23  1:14:28

Operation instruction

Displays

DW50K4030FW/FS

2 3

1 PROGRAM ICONS When press the Program button, each program is selected.

Normal

Eco

Intensive Heavily soiled items include pots and pans.

Express Normally soiled daily using items, with short cycle time.

Pre Wash

2 3*8 SEGMENT Display the remaining time, error code, or delay time.

3 REFILL INDICATORS

Rinse Add

Hygiene

Multi tab (Control lock)

For normally soiled loads, such as pots, plates, glasses, and lightly soiled pans. Standard daily cycle.

Normally soiled daily using items, with reduced energy and water consumptions.

Cold rinse for remove only dirt on dishes stored for a long time or soaking dishes which are dried up before other programme running.

If Rinse Reﬁll or Salt Reﬁll indicator is lit, it means rinse or salt is needed to reﬁll.

To select Rinse Add function, you can use it when you want to add once rinse after the program. It can be used with all program expect Pre Wash.

10_ Operation Instruction

DW4000KM-00000A-00_EN (Basic)_160323.indd 10DW4000KM-00000A-00_EN (Basic)_160323.indd 10 2016-03-23  1:14:282016-03-23  1:14:28

DW50K4050BB

DW50K4030BB

DW50K4010BB

1 PROGRAM ICONS When press the Program button, each program is selected.

Normal

Eco

Intensive (DW50K4050BB/

DW50K4030BB)

Quick Wash (DW50K4050BB)

Delicate (DW50K4050BB)

Express Normally soiled daily using items, with short cycle time.

For normally soiled loads, such as pots, plates, glasses, and lightly soiled pans. Standard daily cycle.

Normally soiled daily using items, with reduced energy and water consumptions.

Heavily soiled items include pots and pans.

Lightly soiled with very short cycle time.

Lightly soiled delicate items.

02 OPERATION INSTRUCTION

Pre Wash (DW50K4050BB/

DW50K4030BB)

2 3*8 SEGMENT Display the remaining time, error code, or delay time.

3 REFILL INDICATORS

SALT REFILL INDICATOR

RINSE REFILL INDICATOR

CONTROL LOCK INDICATOR

DELAY START INDICATOR

DW4000KM-00000A-00_EN (Basic)_160323.indd 11

Cold rinse for remove only dirt on dishes stored for a long time or soaking dishes which are dried up before other programme running.

If Rinse Reﬁll or Salt Reﬁll indicator is lit, it means rinse or salt is needed to reﬁll.

If the “Salt Reﬁll” indicator is lit, it means the dishwasher is low on dishwasher salt and needs to be reﬁlled.

If the “Rinse Reﬁll” indicator is lit, it means the dishwasher is low on dishwasher rinse aid and requires a reﬁll.

If the “Control lock” indicator id ﬁt, it means the dishwasher is locked, you cannot do any operate.

If the “Deley Start” indicator is ﬁt, it means the dishwasher start woll delay several hours which you setup.

Operation Instruction _11

Operation instruction

Dishwasher features

Front & Rear View

1 Upper Basket

2 Spray Arms

3 Lower Basket

4 Water Softener

5 Filters

6 Detergent Dispenser

7 Rinse Aid Dispenser

8 Cutlery basket

12_ Operation Instruction

DW4000KM-00000A-00_EN (Basic)_160323.indd 12DW4000KM-00000A-00_EN (Basic)_160323.indd 12 2016-03-23  1:14:292016-03-23  1:14:29

Prior using for the ﬁrst time

Before using your dishwasher for the ﬁrst time:

A. Set the water softener B. Loading the salt into the softener C. Fill the rinse aid dispenser

D. Fill in detergent

Set the water softener

The water softener is designed to remove minerals and salts from the water, which would have a detrimental or adverse eect on the operation of the appliance. The higher the content of these minerals and salts, the harder the water is. The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

Setting

The amount of salt dispensed can be set from H0 to H7. Salt is not required at the set value H0.

1. Find out about the hardness value of your tap water. Your water utility company will help you

with this.

2. Set value can be found in the water hardness table.

3. Close the door.

4. Switch on "Power" switch.

5. Hold down "Delay" button and then press "Program" button (for freestnading dishwasher) or

"Start" button (for full built-in dishwasher) for 5 seconds. The buzzer rings one time and H. ﬂ ashes on the digital display. (factory setting is H4)

To change the setting:

1. Press "Delay" button.

Each time the button is pressed, the set value increasesby one level;when the value of H7 has been reached, the display jumps back to H0 (o ).

2. Press "Program" or "Start" button. The chosen setting has now been stored.

Contact your local water board for infor-mation on the hardness of your water supply.

Water hardness table

WATER HARDNESS

°Clark Range

0~8 soft 0~1.1 H0

9~10 soft 1.2~1.4 H1

11~12 medium 1.5~1.8 H2

13~15 medium 1.9~2.1 H3

16~20 medium 2.2~2.9 H4

21~26 hard 3.0~3.7 H5

27~38 hard 3.8~5.4 H6

39~62 hard 5.5~8.9 H7

mmol/l Set value on the machine

03 PRIOR USING FOR THE FIRST TIME

Prior Using for the First Time _13

DW4000KM-00000A-00_EN (Basic)_160323.indd 13DW4000KM-00000A-00_EN (Basic)_160323.indd 13 2016-03-23  1:14:292016-03-23  1:14:29

Prior using for the ﬁrst time

Loading the salt into the softener

Always use salt intended for use with dishwasher.

If your model has no water softener, you may skip this section

WATER SOFTENER

The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses salts speciﬁcally designed to eliminate lime and minerals from the water.

The salt container is located beneath the lower basket and should be ﬁlled as follows:

CAUTION: Only use salt speciﬁcally designed for use in dishwashers! All other types of salt not speciﬁcally designed for use in a dishwasher, especially table salt, will damage the water softener. In case of damages caused by the use of unsuitable salt the manufacturer does not give any warranty nor is liable for any caused damages. Only ﬁll with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been split, remaining on the bottom of the machine for any period of time, which may cause corrosion. After the ﬁrst wash cycle the control panel light expires.

1. Remove the lower basket and then

unscrew and remove the cap from the salt container.

1 2

2. If you are ﬁ lling the container for the ﬁ rst time, ﬁ ll 2/3 of its volume with water (around 500ml).

3. Place the end of the funnel (supplied) into the hole and introduce about 1.2kg of salt. It is normal for a

small amount of water to come out of the salt container.

4. Carefully screw the cap back on.

5. Usually, the salt warning light will be o in 2-6 days after the salt container is ﬁ lled with salt.

• The salt container must be reﬁlled when the salt warning light in the control panel comes on. Though the salt container is ﬁlled enough, the indicator light may not black out before the salt fully dissolve. If there is no salt warning light in the control panel (for some models), you can judge when to load the salt into the softener by the cycles that the dishwasher had run (see the following schema).

• If there are spills of the salt, a soak program could be run to wipe them out.

14_ Prior Using for the First Time

DW4000KM-00000A-00_EN (Basic)_160323.indd 14DW4000KM-00000A-00_EN (Basic)_160323.indd 14 2016-03-23  1:14:292016-03-23  1:14:29

Fill the rinse aid dispenser

MAX

Function of rinse aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and streak free drying.

CAUTION: Only use branded rinse aid for dishwasher. Never ﬁll the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

When to Reﬁll the Rinse Aid Dispenser

If there is no rinse-aid warning light on the control panel, you can judge the amount of rinseaid by the color of the optical level indicator "D" located next to the cap. When the rinse-aid container is full, the whole indicator will be dark. As the rinse aid diminishes, the size of the dark dot decreases. You should never let the rinse aid get below 1/4 full.

As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator changes, as illustrated below.

Full 3/4 full 1/2 full 1/4 full : Should reﬁll to eliminate spotting Empty

Rinse aid dispenser

1. To open the dispenser, turn the cap to the "open" (left) arrow

and lift it out.

D (Rinse-Aid indicator)

MAX

03 PRIOR USING FOR THE FIRST TIME

2. Pour the rinse aid into the dispenser, be careful not to overﬁ ll.

3. Replace the cap by inserting it aligned with "open" arrow

and turning it to the "closed" (right) arrow.

Prior Using for the First Time _15

DW4000KM-00000A-00_EN (Basic)_160323.indd 15DW4000KM-00000A-00_EN (Basic)_160323.indd 15 2016-03-23  1:14:292016-03-23  1:14:29

+ 33 hidden pages

Samsung DW50K4050BB, DW50K4030FW, DW50K4030BB, DW50K4010BB, DW50K4030FS User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual