Samsung ADT Security Hub User Manual
ADT Security Hub
User Guide
This User Guide provides an introduction to the key features
of the ADT Security Hub. Visit SmartThings.com/Support-ADT
for more detailed information and customer support.
Contents
Intrusion Detection
• Introduction
• Arming the system
• Arming the system and bypassing detectors
• Disarming the system
• In the event of an intrusion
• In the event of a false alarm
• Advanced intrusion detection
• Home button
• Emergency button
• Manually notifying ADT
• System icons
• Local Walk Test
ADT Security Hub
A
B
Life Safety
• Introduction
• In the event of smoke or extreme temperatures
• In the event of carbon monoxide
• In the event of a water leak
C
Security Codes
• Master user code
• User codes
D
System Settings
E
Transferring Your ADT Security Hub
F
A
ADT Security Hub
Home button
• No lights: The system is not ready to be armed. One or
more protected doors or windows are open.
• Green: The system is ready to be armed. All protected
doors and windows are closed.
• Flashing green: The system is ready to be armed. All
protected doors and windows are closed but there is a
power outage.
• Flashing orange: The system is not ready to be armed. One
or more protected doors or windows are open, and there is
a power outage.
ADT Security Hub
Use the Home button to wake your ADT Security Hub from sleep
mode or to return to the Home screen. The Home button will
change color to show the status of your system:
• Red: The system is armed.
• Flashing red: The system is armed and an alarm has been
triggered.
Emergency Button
Home Screen
Home Button
Press the Emergency button to manually notify ADT of a panic,
re, or emergency event.
The touchscreen will display buttons for Panic, Fire, and Emergency.
Requires an optional ADT professional monitoring service.
Visit SmartThings.com/ADT for more information.
ADT Security Hub
Manually notifying ADT
ADT Security Hub
Use the Emergency button to manually notify ADT of a panic,
re, or emergency event.
The Emergency button changes color to show the status of
your system:
• No lights: The emergency button is not available.
• White: The emergency button is ready for use.
• Blinking white: An emergency alarm is in progress.
Emergency button
Requires an optional ADT professional monitoring service.
Visit SmartThings.com/ADT for more information.
Press and hold one of the Panic, Fire, or Emergency buttons for two
seconds. Your ADT Security Hub will notify ADT and an operator will
respond according to the terms of your monitoring service.
For compliance with ANSI/SIA CP-01-2010 and to help reduce the risk of
false alarms, you must press the Emergency button on the ADT Security
Hub, and then press and hold one of the Panic, Fire, or Emergency icons
for two seconds.
The following icons may appear at the top of the touchscreen:
System icons
ADT Security Hub ADT Security Hub
Power Connected
Power Not Connected
Low Backup Battery
System Sounds On
System Sounds Off
(Siren still active)
Dim Touchscreen
(Touch to dim screen)
Incoming Messages
(Touch to see messages)
4
Panic, Fire, and Emergency buttons on your ADT Security Hub:
B
Intrusion Detection
Intrusion detection is provided by devices such as the ADT Door
and Window Detector or the ADT Motion Detector. These devices
are only active when armed by your ADT Security Hub.
If your home is protected by an ADT professional monitoring
service, the ADT Security Hub will activate the alarm siren and
notify ADT as soon as an intrusion is detected and initiate an
emergency response.
If your home is not protected by an ADT professional monitoring
service, the ADT Security Hub will activate the alarm siren as soon
as an intrusion is detected but will not notify ADT.
Visit SmartThings.com/ADT for more details on ADT professional
monitoring services and to see the full list of compatible detectors
and alarms.
Introduction
It is strongly recommended that you perform a weekly test of your
ADT Security Hub, detectors, and alarms:
Local walk test
Select System Settings from the Home screen.
Enter the Master User Code.
Select Walk Test.
Select Sensors Test and follow the on-screen instructions.
Select Console Test and follow the on-screen instructions.
1.
2.
3.
4.
5.
Tap or the Home button to exit Test Mode.6.
ADT Security Hub
• If a detector fails the Sensors Test, check that it’s
been installed correctly or visit SmartThings.com/
Support-ADT for assistance.
Loading...