
ECC F040
ECC Product Support
Technical Tip
Original / Supersedes
Supplements / :
Original
Title:
Quick guide for accessory connection to NASA high wall
units.
Compiled by: Joakim
Andersson
Approved by: Jimmy
Cederlund
For more information view the latest User or Service manuals.
If you have any questions please raise them via the QNA section of GSPN.
Page 1 of 5
AC026MNADKH/EU, AC035MNADKH/EU , AC052MNADKH/EU
AC071MNADKH/EU, AC026KNADEH/EU, AC035KNADEH/EU
AC071KNADEH/EU
Installers asking for how to connect wired remote controllers and Wi-Fi
kits. Information is not in the indoor unit installation manual and the
controller manuals describe how to connect to units with connection plinth.
Remove the caps and screws,

For more information view the latest User or Service manuals on GSPN. If you have any questions please
raise them via the Subsidiary Technical Support
Page 2 of 5
Unlock the side hooks 1 and 2 then the centre hooks attached to the fixing
plate.(If unit is already installed on the wall push it gently upwards to
unlock. Then unlock the bottom hooks, their possition is marked by arrows
on the outide of the lower cover.