Samsung 21Z50, 21Z57, CL21Z43, CL-21Z43MJ, CL-21Z43MQ Owner's Instructions Manual
...
English - 1
Control Panel (depending on the model)
➢
The product color and shape may vary depending on the
model.
The 2 and 3 buttons also have the same function as the
◄/►/▲/▼ buttons on the remote control.
If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
COLOR TELEVISION
AA68-03806M-00
Owner’s Instructions
Before operating, please read this manual carefully,
and retain it for future reference.
Register your product at www.samsung.com/global/register.
Record your Model and Serial number.
▪ Model __________ ▪ Serial No. __________
CL21Z43/21Z50/21Z57
Connection Panel (depending on the model)
➢
The product color and shape may vary depending on the
model.
➢
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
1 Audio/Video Output Jacks
Connect to the audio/video input jacks of a recording VCR.
2 Audio/Video Input Jacks
Connect to the audio/video output jacks of VCRs, DVD players
and similar devices.
3 Component Video Input Jacks (Y, PB, PR)
Connect to the Component video outputs of a DVD or DTV
set-top box. 480i video signal input is available.
When using the Component Video input, connect audio jacks
to “AV IN 2 (AUDIO-L/R)”.
4 ANT IN
Connect to an antenna or to a cable TV system.
➢
Please be sure to match the color coded input terminals
and cable jacks.
When both the side and rear jacks (AV IN 2) are
connected to external equipment, the side receives
priority.
1 Audio Input Jacks
Connect audio signals from a camcorder or video game.
2 Video Input Jack
Connect a video signal from a camcorder or video game.
3 Headphone Jack
Connect a set of external headphones to this jack for private
listening.
Front Panel
1 On-screen menu display
2 Volume adjustment
3 Channel selection
4 Remote control sensor
5 Indicator (Standby or Timer)
6 Power on/off
Rear Jack
1
2
3
4
3
Side Jack
1
2
3
AA68-03806M_Eng.indd 1 2007-07-07 ｿﾀﾀ・9:26:21
English - 2
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Viewing the Menus
1 Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
“Setup”.
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected items.
Press the MENU button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
Remote Control (depending on the model)
➢
Operation of remote control may be affected by bright
artificial light near to the TV.
➢
This is a special remote control for the visually impaired,
and has Braille points on the POWER, Channel and
Volume buttons.
1 POWER
Turns the TV on and off.
2 Number buttons
Press to select channels
directly on the TV.
3 –
Press to select channels
over 100. For example,
for channel 122, press “-”,
then “2”, then “2”.
4 VOL +, VOL -
Press to increase or
decrease the volume.
5 MENU
Displays the main
on-screen menu.
6 ▲/▼/◄/►
Controls the cursor in the
menu.
7 ENTER
While using the on-screen
menus, press
ENTER to
activate (or change) a
particular item.
8 MTS
(Multi-channel Television
Sound)
Press to choose
“Stereo”, “Mono”, or
“SAP” (Secondary Audio
Program).
9 R.SURF
Press to automatically
return to a preferred
channel after a userpreset
time delay.
0 SOURCE
Press to display all of the
available video sources.
! INFO
Press to display
information on the TV
screen.
@ PRE-CH
Tunes to the previous
channel.
# CH , CH
Press to change
channels.
$ EXIT
Press to exit the menu.
% MUTE
Press to temporarily cut
off the sound.
^ SLEEP
Press to select a preset
time interval for automatic
shut off.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not operate
normally, check that the “+” and “–” ends of
the batteries are inserted correctly or the
batteries are drained.
➢
Do not mix battery types, i.e. alkaline and manganese.
AA68-03806M_Eng.indd 2 2007-07-07 ｿﾀﾀ・9:26:26
English - 3
Input - Source List / Edit Name
Source List
You can switch between
viewing signal from
connected equipment, such
as a VCR, DVD, set-top
box, and the TV source
(broadcast or cable).
➢
Press the SOURCE
button on the remote control repeatedly to select the
desired signal source.
Edit Name
You can give a name to the
external source.
Setup - Plug & Play
When the TV is initially powered on, several basic customer
settings proceed automatically and subsequently.
The following settings are available.
1 Press the POWER button
on the remote control.
The message “Plug &
Play” is displayed. It
flickers for a little while and
then Language menu is
automatically displayed.
2 Press the ◄ or ► button to
select the language, then
press the MENU button.
The message “Ant input
check” is displayed.
3 Make sure that the antenna
is connected to the TV.
Press the ENTER button,
then the “Channel” is
displayed.
4 Press the ◄ or ► button to
select “Air”, “STD”, “HRC”,
or “IRC”, then the MENU
button. The message “Auto
Program” is displayed.
5 Press the ENTER button to
select “Start”. The TV will
begin memorizing all of the
available channels. Press the
ENTER button to stop.
continued...
6 After all available channels
are stored, the “Time” is
displayed. Press the ENTER
button. Press the ◄ or ►
button to move to the hour
or minute. Set the clock by
pressing the ▲ or ▼ button.
6 When you have finished,
press the MENU button.
The “Enjoy your watching.”
is displayed.
➢
Plug & Play feature
doesn’t work in the AV
mode.
Re-setting the Plug & Play
Method:
MENU ▲/▼ (Setup)
ENTER ▲/▼ (Plug & Play)
ENTER
Plug & Play
Move Enter Return
Source List
TV
AV1
-- --
AV2
-- --
Component
-- --
Adjust Skip
Setup
Time ►
Plug & Play ►
Caption ►
Language : English
▼ More
Ant input check
Auto Program Skip
Adjust Skip
Channel
Auto Program ►
Add/Delete : Deleted ►
Air/CATV : Air
Name :
----
Auto Program
Enter Skip
Start
Air 7
Enjoy your watching
Move Enter Return
Edit Name
AV1 : -- --
AV2 :
-- --
Component :
-- --
-- --
VCR
DVD
Cable STB
Sat. STB
AV Recv.
DVD Recv.
Game
Camcorder
DVD Combo
Move Enter Return
Setup
Time ►
Plug & Play ►
Caption ►
Language : English
▼ More
Move Enter Return
Time
Clock -- : -- am
On Timer -- : -- am Off
Off Timer -- : -- am Off
Sleep Timer : Off
On Timer Volume : 10
AA68-03806M_Eng.indd 3 2007-07-07 ｿﾀﾀ・9:26:30
Loading...