Samsung 2.008030309222e16, HT-AS720S-XAC, HT-AS720S Instruction Manual

Instruction Manual
Digital Surround AV Receiver System
HT-AS720S
SAMSUNG ELECTRONICS CANADA,INC.
HEADQUARTERS
55 Standish Court Mississauga,Ontario L5R 4B2 Canada
TEL:1-905-542-3535
SERVICE DIVISION
55 Standish Court Mississauga,Ontario L5R 4B2 Canada
1-800-SAMSUNG (1-800-726-7864)
HT-AS720S-XAC-ENG-표지.indd 2-3HT-AS720S-XAC-ENG-표지.indd 2-3 2008-01-24 오후 7:00:582008-01-24 오후 7:00:58
3
ENG
Precautions
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the amplifier. In order to disconnect the player completely from the power supply, remove the mains plug from the wall outlet, especially when left unused for a long period of time.
Protect the player from moisture(i.e. vases) , and excess heat(e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use. Use of this product is for personal use only. Condensation may occur if your player or disc have been stored in cold temperatures. If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before using.
During thunderstorms, disconnect AC main plug from the wall outlet. Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and malfunction of the unit.
The battery used with this product contain chemicals
that are harmful to the environment.
Do not dispose of batteries in the general household
trash.
2
Safety Warnings
WARNING : To reduce the risk of fire or electric shock,do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK,MATCH WIDE BLADE OF PLUG TO WIDE SLOT,FULLY
INSERT.
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. SERVICE PERSONNEL.
CAUTION
This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit.
This symbol alerts you to important operating and maintenance instructions accompanying the unit.
Note to CATV system installer :
This reminder is provided to call the CATV system installer ’s attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
PREPARATION
HT-AS720S-XAC-ENG 2008.1.25 3:16 PM Page 2
54
Contents
PREPARATION
Safety Warnings ..............................................................................................................2
Precautions......................................................................................................................3
Features ..........................................................................................................................4
Description ......................................................................................................................6
CONNECTIONS
Connecting speakers.......................................................................................................10
Connecting external devices ...........................................................................................12
Anynet+ ...........................................................................................................................16
Connecting the FM antenna ............................................................................................17
OPERATION
Before using the AV receiver...........................................................................................18
Selecting digital/analog input ..........................................................................................19
Setting the speaker mode................................................................................................20
Setting the speaker listening distance ...........................................................................22
Setting digital input ..........................................................................................................23
Setting HDMI AUDIO.......................................................................................................24
Setting DRC (Dynamic Range Compression) .................................................................25
Test tone .........................................................................................................................26
Setting speaker level .......................................................................................................28
Dolby Pro Logic llx mode.................................................................................................29
Setting Dolby Pro Logic llx effect ....................................................................................30
Setting NEO:6 mode........................................................................................................31
Setting EX/ES mode........................................................................................................32
Setting Tone Control ........................................................................................................33
SFE mode........................................................................................................................34
Stereo mode ....................................................................................................................35
RADIO OPERATION
Listening to radio ............................................................................................................36
Presetting radio stations .................................................................................................37
MISCELLANEOUS
Convenient functions ......................................................................................................38
Operating your TV with the remote control......................................................................41
Operating your DVD or VCR with the remote control ......................................................43
Before calling for service .................................................................................................45
Specifications ..................................................................................................................47
PREPARATION
Features
Dolby Pro Logic llx
Dolby Pro Logic IIx is a new technology that provides discrete 7.1 channel out of 2 channel or multi channel sources.It also provides Music,Movie and Game modes.
DTS 96/24
DTS is a surround format that implements 5.1 channel multi channel sound at 96KHz/24bit. In addition, it can also reproduce the matrix 6.1 of DTS 96/24 decorder signals.
DOLBY DIGITAL EX
Adds a surround back channel for more spacious sound compared to regular 5.1 channel Dolby Digital.
DTS (Digital Theater Systems)
DTS plays back 5.1 channel sound with less compression than Dolby Digital for richer sound.
DTS-ES (Extended Surround)
DTS-ES adds an additional rear center surround channel for 6.1 channel sound. It is compatible with existing DTS Digital Sound formats.
DTS
Reproduces digital PCM or analog stereo over 6.1 channels using a high precision DTS digital matrix.
SFE (Sound Field Effect) Using 24bit Audio Digital Signal Processing
Provides more realistic surround sound with normal stereo audio sources.
Anynet+ (HDMI-CEC) Function
Anynet+ is a function that can be used to operate this AV Receiver with a Samsung TV remote control, by connecting the receiver to a SAMSUNG TV using an HDMI Cable. (This function is available only in connection with Samsung TV and DVD player supporting Anynet+(HDMI-CEC).)
Digital AV Receiver
This product is a pure digital AV receiver that performs digital signal processing to minimize signal distortion and loss.
ENG
HT-AS720S-XAC-ENG 2008.1.25 3:16 PM Page 4
7
ENG
6
[
Rear panel
]
SUBWOOFER AUDIO OUTPUT JACK
PREPARATION
Description
[
Front panel
]
[
Display
]
POWER button
POWER STANDBY Indicator
SETUP button
FUNCTION button
7.1CH IN STEREO
TONE CONTROL button
VOLUME CONTROL
INPUT MODE button
HEADPHONE Jack
AUX IN Jack
Accessories
√√
œœ
Remote control (AH59-01867F)
FM antenna
(AH42-00017A)
Users manual
(AH68-01989S)
FM ANTENNA JACK
DVD OPTICAL DIGITAL
AUDIO INPUT JACK
SAT (ANYNET+)
OPTICAL AUDIO INPUT JACK
CD COAXIAL DIGITAL
AUDIO INPUT JACK
SELECT( ) button
TUNING MODE button
SPEAKER INDICATORS
DOLBY DIGITAL EX INDICATOR
FRONT DISPLAY
DTS INDICATOR
RADIO STEREO INDICATORS
RADIO FREQUENCY INDICATOR
RADIO BROADCASTING RECEIVING INDICATOR
LIVE SURROUND INDICATOR
DIGITAL
INDICATOR
L.PCM INDICATOR
7.1 CH ANALOG
AUDIO INPUT JACKS
DVD VIDEO INPUT JACK
SAT(Cable/Satellite/Set-top box) VIDEO INPUT JACK
VCR VIDEO INPUT JACK
HDMI INPUT
JACKS
VCR VIDEO OUTPUT JACK
MONITOR VIDEO OUTPUT JACK
FRONT SPEAKER TERMINALS
CENTER SPEAKER TERMINALS
SURROUND BACK SPEAKER TERMINALS
SURROUND SPEAKER TERMINALS
CD AUDIO INPUT JACKS
DVD AUDIO INPUT JACKS
VCR AUDIO INPUT JACKS
VCR AUDIO OUTPUT JACKS
Remote control sensor SURROUND button
HDMI OUTPUT JACK
SAT AUDIO INPUT JACKS
,
HT-AS720S-XAC-ENG 2008.1.25 3:16 PM Page 6
9
ENG
8
Insert remote control batteries
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.
Range of operation of the remote control
Remove the battery cover in the direction of the arrow.
1
Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and –).
2
Replace the battery cover.
3
Follow these precautions to avoid leaking or cracking batteries:
Place batteries in the remote control so they match the polarity:(+) to (+)and ()to (–).
Use the correct type of batteries. Batteries that look similar may differ in voltage.
Always replace both batteries at the same time.
Do not expose batteries to heat or flame.
PREPARATION
Description
(Cont'd)
VOLUME CONTROL button
MUTE button
SETUP/MENU button
POWER button
NUMBER (0~9) buttons
INFO button
DRC button
SLEEP button
SUBWOOFER button
EX/ES button
SFE MODE button
NEO : 6 MODE button
SPK LEVEL button
STEREO button
EXTERNAL DEVICE PLAYBACK button
CURSOR/ENTER button
TV button
AMP button
DVD button VCR button
DIMMER button
TV/VIDEO
,
FUNCTION button
CD button
VCR button
DVD button
7.1 CH button
SAT button
AUX button
INPUT MODE button
MO/ST button
TUNER button
TUNER MEMORY button
MODE button
TUNING MODE button
TUNING/CHANNEL button
SPK SELECT button
TEST TONE button
[
Remote control
]
EFFECT button
HT-AS720S-XAC-ENG 2008.1.25 3:16 PM Page 8
11
ENG
10
CONNECTIONS
MAIN UNIT AV-R720 FRONT SPEAKER PS-AF720S CENTER SPEAKER PS-AC720S SURROUND SPEAKER PS-AR720S ACTIVE SUBWOOFER PS-AW720S
SYSTEM MODEL NAME : HT-AS720S
CONNECTING SPEAKER WIRE
SURROUND (R)
PS-AR720S
SURROUND (L)
PS-AR720S
SURROUND
BACK (R)
SURROUND
BACK (R)
(Not supplied)
MAIN UNIT
AV-R720
CENTER
PS-AC720S
Connecting speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Place these speakers behind your listening position.
If there isn't enough room, place these speakers so they face each other.
Place them about 60 to 90cm (2 to 3feet) above your ears, facing slightly downward.
Unlike the front and center speakers, the surround
speakers are used to handle mainly sound effects and sound will not come from them all the time.
Surround Speakers
SL SR
SBL SBR
Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at the same height as your ears.
Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speaker.
Front Speakers
It is best to install it at the same height as the front speakers.
You can also install it directly over or under the TV.
Center speaker
Place AV Receiver on a dedicated stand or rack.
Position of AV Receiver
When you attach the speakers to a wall, make sure to fasten them tightly so they do not fall off.
Never touch speaker terminals while the power is on. Doing so could result in electric shock.
Make sure the polarities (+ and -) are correct.
This system is capable of reproducing 6.1/7.1 channel sound, however only 5.1 speakers are supplied.
Keep the subwoofer speaker out of reach of children to prevent them from inserting their hands or objects into the duct (hole).
Caution
The position of the subwoofer is not so critical. Place it anywhere you like.
Subwoofer
If you are using two rear center speakers, place them facing forward from behind the listening position.
Place the surround back speaker about 70 cm to 1 m (2.3~3.3feet) above surround speakers, facing slightly downwards.
Surround Back Speakers
SBL
SBR
FRONT (L)
PS-AF720S
FRONT (R)
PS-AF720S
ACTIVE SUBWOOFER
(BUILT-IN POWER AMPLIFIER)
PS-AW720S
1
Connect the SW OUT terminal of the amplifier (AV-R720) to the INPUT terminal of the subwoofer speaker.
1. Loosen the knob by turning counterclockwise.
2. Insert the bare part of the wire into the hole in the side of each terminal.
3. Tighten the knob by turning clockwise to secure the wire.
Connecting the Speakers
1. Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal () and the red wire
into the red (+) terminal, and then release the tab.
3. Connect the connecting plugs to the back of the Home Theater.
Make sure the colors of the speaker terminals match the colors of the connecting plugs.
2
Press the POWER button on the rear side of the subwoofer to turn the power on.
3
Using the subwoofers VOLUME control, you can set the desired bass level (See page 30 "Setting Speaker Level" to set the subwoofer level in the menu).
Active subwoofer with integrated 150W amplifier provides rich bass sound.
Subwoofer function
1
2
Black Red
HT-AS720S-XAC-ENG 2008.1.25 3:16 PM Page 10
13
ENG
12
SAT(Cable/Satellite/Settop Box)
VCR
TV
If the external component has only one audio output jack, connect it to either the right or left audio input jack of the main unit.
Connect the audio cable's red plug to the red jack and white cable to the white jack.
CONNECTIONS
Connecting external devices
DVD or Blu-RAY Player
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting video devices
Disconnect the power plug from the outlet if you will not use this unit for a long period of time.
Even though the Digital Audio inputs are labelled DVD, SAT and CD, you can connect your DVD/SAT/CD player to either the OPTICAL or COAXIAL digital audio input (as long as it matches the Digital audio output on your player).
TV
or
or
HT-AS720S-XAC-ENG 2008.1.25 3:16 PM Page 12
15
ENG
14
Connecting external devices
(Cont'd)
CD Player
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting audio/7.1 channel devices
By connecting through the HDMI(High-Definition Multimedia Interface) interface, you can play back digital video and audio without conversion to analog.
Connecting external devices via HDMI
To play digital contents through the HDMI connection, both of the connected external device and TV must support High-bandwidth Digital Content
Protection System (HDCP). This product supports HDCP.
High-bandwidth Digital Content Protection System (HDCP) support
Audio from SACD discs will not be played. To play a DVD disk whose copyright is protected by CPPM, use a player supporting CPPM.
The quality of the audio output through the HDMI jack (sampling frequency and bit rate) may be limited by the performance of the connected device.
Since HDMI connection supports both video and audio, you dont have to connect an additional audio cable.
Connect it if you want to use Anynet+.
DVD or Blu-RAY Player
TV
SAT
(Cable/Satellite/Set-top box)
CONNECTIONS
DVD/Blu-RAY or 7.1 channel player
TV
A TV with an HDMI jack.
A TV with a DVI-D jack (TV supporting HDCP)
A TV with a DVI-D jack (TV not supporting HDCP)
COMPATIBILITY WITH A TV SUPPORTING HDMI
Video/Audio
Video
-
If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the AV receiver using the TVs remote control. This function is available only in connection with Samsung TV and DVD player supporting Anynet +(HDMI-CEC).
Please check the logo. If your TV has an logo, then it supports the Anynet+ function.
HT-AS720S-XAC-ENG 2008.1.25 3:16 PM Page 14
Loading...
+ 17 hidden pages