Samson Servo 260 User Manual

SERVO260 POWER

A M P L I F I E R

CLIP

SAMSON

STUDIO AMPLIFIER 120 WATT STEREO

IDLE

∞MAX

CLIP

SERVO - 260

PROTECTION

IDLE

POWER

∞

MAX

SERVO 260 STUDIO AMPLIFIER

FUSE	CAUTION	!
6A/250V	RISK OF ELECTRIC SHOCK
	DO NOT OPEN
	CAUTION

			HEATSINK MAY BE HOT!
			DO NOT BLOCK AIRFLOW
	CAUTION ; REPLACE WITH		OR OVERHEATING MAY
	THE SAME TYPE FUSE AS		OCCUR.
	INDICATED. UTILISER UN	~AC INPUT
	FUSIBLE DE RECHANGE DE
		115V/60Hz, 490W	S/N
	MEME TYPE.

USE CLASS 2 WIRING MINIMUM LOAD IMPEDANCE 4 Ω	LEFT
RIGHT

+RIGHT GROUND LEFT+

SAMSON

TO PREVENT SHOCK DO NOT

OPEN. NO USER SERVICABLE

PARTS INSIDE. REFER SERVICING

T O Q U A L I F I E D S E R V I C E

PERSONNEL. TO PREVENT FIRE

OR SHOCK HAZARD DO NOT

EXPOSE TO RAIN OR MOISTURE.

R L

(UNBALANCED 10KΩ /0dBM)

RIGHT		LEFT

INPUTS

(BALANCED 10KΩ /0dBM)

The Servo 260 power amplifier is designed for fixed installations, recording and live performance use. Easily installed, this compact, 2-space rack-mount stereo power amplifier delivers 130 watts per channel into a 4 ohm load, over a bandwidth of 20 Hz to 50 kHz. The 260 features high-current output power transistors with a bipolar design and servo circuitry that continuously keeps DC output during idling at or near 0 volts. It also features balanced 1/4" Tip-Ring-Sleeve inputs as well as push-spring terminal outputs, front-panel clip, idle and protection lights and thermal and overcurrent protection circuitry. The Servo 260 is convection cooled for silent operation, eliminating both fan noise and the need for filter maintenance. Housed in a rugged steel chassis, the Servo 260 uses high-quality component to ensure safe, reliable performance in all applications.

Contact:

•Rack-mount stereo power amplifier (2-space).

•130 watts per channel into 4 ohms (stereo).

•20 Hz to 50 kHz frequency response.

•Balanced 1/4″ TRS and unbalanced RCA inputs and pushspring terminal outputs.

•1/4″ and push-spring terminal outputs.

•Turn-on muting to prevent speaker “thumps.”

•Servo protection circuitry continuously keeps DC output during idling at or near 0 V (thus keeping idle speakers at their 0 point).

•Protection circuitry against overheating and overcurrent.

•High-current output power transistors.

•Unique bipolar circuit design.

•Front-panel clip, idle and protection lights.

•Independent leftand right-channel input controls with 41-position detents.

•Convection cooled (No Fan).

•All-steel chassis with new black matte titanium finish and anodized aluminum heat sink.

Samson Technologies Corp., P.O. Box 9031, Syosset, NY 11791-9031 • Phone: [phone] • Fax: [phone] • www.samsontech.com