Runco XP-50, XP-65 User Manual

I N S T A L L A T I O N / O P E R A T I O N M A N U A L

XP-50

XP-65

High Definition, 1080p Flat Panel Plasma Displays

with

RuncoCare™ Standard Two Year Limited

Warranty

Congratulations on your purchase of a Runco® product! With proper installation, setup and care, you should enjoy many years of unparalleled video performance.

This RuncoCare Standard Limited Warranty is provided free of charge by Runco International with the purchase of a covered Runco product. The following sets forth Runco’s Standard Limited Warranty applicable to all Runco projectors, processors, LCD and plasma display products, with the exception of the following models: XP-103DHD, SC-1, SC-1a and VW-100HD1.

The following terms and conditions of the RuncoCare Standard Limited Warranty represent a contract between us, Runco International and you, the customer who has purchased a Runco product. This contract applies to purchases of covered Runco products occurring on or after September 1, 2008. Runco reserves the right to change the terms of this contract, and such changes shall apply to purchases of covered Runco products that occur on or after any future effective date.

RuncoCare Standard Features

•Two-year protection from defects in material and workmanship

•Access to 24x7 phone support

•Complimentary, second-day one-way shipping

Warranty Coverage

Runco warrants its products to be free from defects in material and workmanship during the warranty period provided below. If, in Runco’s determination, a product proves to be defective in material or workmanship during the warranty period, Runco will repair the product, replace the product with a similar new or like new product, or refund a prorata share of the purchase price (calculated based on the remainder of the warranty period and the then-current MSRP2 of a similar product), if repair or replacement of the product is determined by Runco to not be feasible.

Length of Warranty

Runco products are warranted for two (2) years from the date of shipment from Runco. Lamps are warranted six (6) months from the date of shipment or 1000 hours, whichever comes first. All other accessories, which includes, but is not limited to, cables, remotes, carrying cases, lens cap and other peripherals sold with the Runco product, are warranted for ninety (90) days from the date of shipment. Repaired product or replacement lamp is subsequently warranted for the remaining portion (if any) of the original warranty term or 90 days from the date the product was shipped to you, whichever is longer.

Eligibility

This RuncoCare Standard Limited Warranty is valid only for the first customer who purchases the covered product from an authorized Runco dealer or distributor. This warranty is not transferable. You may be required to provide proof of purchase in order to receive warranty services.

1.Runco may update this list of products excluded from this warranty from time to time at Runco’s sole discretion, but updates to the list of covered products will not apply on a retroactive basis.

2.MSRP is defined as the most recent product price listed on Runco’s price list.

CinemaWall XP-50/XP-65 Installation/Operation Manual

iii

RuncoCare Claim Procedure

In the event of a product defect, please follow the warranty claim procedure provided below:

1.The Customer is required to contact a Runco dealer or Runco Technical Support via E-mail at [e-mail] or via phone at (toll free) 800-23RUNCO (800-237-8626). If the customer is located outside North America, call [phone] in Europe for product service.

2.Be prepared to provide the date of purchase, the place of purchase, serial number, product model number, description of the problem and troubleshooting steps already attempted.

3.Runco Technical Support staff will attempt to correct any minor issues that may be causing the problem. If Runco is unable to fix the problem to the customer’s satisfaction, Runco will issue a Return Material Authorization (RMA) if it is determined that the claim was made within the coverage period of the Standard Limited Warranty.

4.The customer will need to return the defective product to the Runco repair depot location specified by the Runco technical support representative. The customer will need to properly package the defective product, consisting of the product only, and not include any accessories (e.g., cables, remotes, carrying cases, lens, lens cap and other peripherals) and return it to the Runco repair depot specified by the technical support representative. It is the customer’s responsibility to properly package the hardware, include all appropriate materials, and return it to the location specified by the Runco technical support department. The customer will need to address and resolve any shipping damage claims directly with the shipping company.

5.The customer is responsible for providing a suitable box to ship the defective product to an authorized Runco repair depot. Boxes may be purchased from a Runco technical support representative.

6.The customer is responsible for paying freight charges to ship the defective product to an authorized Runco repair depot.

7.Runco will pay freight charges to return the repaired/replacement product to the customer from the Runco repair depot.

8.Once an RMA has been created, the customer may contact [e-mail] for follow-up questions or confirmation status of the claim process.

Warranty Exclusions

This RuncoCare Standard Limited Warranty does not include or is limited by the following:

1.Products not purchased from an authorized Runco dealer

2.Rental costs incurred by the customer in the event of product defect or failure

3.Any product with a defaced, modified, or removed serial number

4.Damage, deterioration, or malfunction resulting from:

a Accident, abuse, misuse, neglect, improper ventilation, fire, water, disaster, lightning, or other acts of nature, smoke exposure (cigarette or otherwise), unauthorized product modification (including use of an unauthorized mount), or failure to follow instructions supplied with the product

b Repair or attempted repair by anyone not authorized by Runco c Any damage to the product due to shipment

d Removal or installation of the product

e Causes external to the product, such as electric power fluctuations or failure f Use of supplies or parts not meeting Runco’s specifications

g Normal wear and tear

h Expected lamp degradation and normal decrease in lamp output over a period of time or as the lamp is consumed

iCustomer caused defects, including but not limited to, scratched/defaced/altered plastics

ivCinemaWall XP-50/XP-65 Installation/Operation Manual

jFailure to follow maintenance procedures as outlined in the product’s user guide where a schedule is specified for regular cleaning of the product

kOpening the product and/or tampering with internal circuitry

lProducts lost, stolen or discarded

mAny damage or dissatisfaction associated with latent images, “burnin,” or any other damage determined by Runco to be the result of customer use patterns

nAny other cause, which does not relate to a product defect in material or workmanship

5.Removal, installation, and setup service charges are excluded from this Standard Limited warranty

6.Runco’s warranty does not cover black uniformity issues or other LCD issues associated with usage outside the Runco recommended guidelines and specifications for the product

7.Second day shipment delivery time and availability may vary based on origin and destination and Runco is unable to deliver to PO Box and FPO Box addresses

Extended Service Options

Runco offers extended and expanded service plans. For information on additional product protection, please E-mail [e-mail] or call (toll free) 800-23RUNCO (800-237-8626).

Online Product Registration

Please visit http://www.runco.com/info.html to register product.

Limitation of Implied Warranties

RUNCO PROVIDES NO WARRANTIES, EXPRESS OR IMPLIED, EXCEPT THOSE EXPRESSLY PROVIDED HEREIN. RUNCO EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

CinemaWall XP-50/XP-65 Installation/Operation Manual

v

Exclusion of Damages

RUNCO’S MAXIMUM AGGREGATE LIABILITY HEREUNDER IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT.

1.RUNCO SHALL NOT BE LIABLE FOR DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECT IN THE PRODUCT, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF THE CUSTOMER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

2.RUNCO SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES ANY OTHER DAMAGES, WHETHER INCIDENTAL, INDIRECT, CONSEQUENTIAL OR OTHERWISE.

3.RUNCO SHALL NOT BE LIABLE FOR ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.

Effect of Local Law

This warranty gives you specific legal rights, and you may have other rights, which vary from locality to locality. Some localities do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above limitations and exclusions may not apply to you.

COPYRIGHT AND TRADEMARKS:

© Copyright 2008 Runco International, LLC (“Runco”). This document contains proprietary information protected by copyright, trademark and other intellectual property laws. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of Runco.

The trademarks reproduced in this Runco Owner’s Manual and used on the Runco Products are either owned by Runco or are licensed by Runco. You may not reproduce or use the trademarks without the prior written consent of Runco.

Runco Products are manufactured under one or more of the following patents: US. Patent 6755540 and Other Patents Pending.

vi	CinemaWall XP-50/XP-65 Installation/Operation Manual

Important Safety Instructions

Thank you for your purchase of this quality Runco product! For best performance, please read this manual carefully as it is your guide through the menus and operation.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the apparatus.

11.Only use the attachments/accessories specified by Runco.

12.Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in

any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

CinemaWall XP-50/XP-65 Installation/Operation Manual

vii

Compliance Information

DECLARATION OF CONFORMITY:

Manufacturer’s Name: Runco International, LLC

Manufacturer’s Address: 1195 NW Compton Drive, Beaverton, OR 97006-1992 hereby declares that the products Model Numbers:

XP-50 and XP-65

conform with the provisions of:

Council Directive 2004/108/EC on Electromagnetic Compatibility;

EN 55022 “Limits and methods of measurements of radio interference characteristics of information technology equipment” 1998;

EN 55024 “Limits and methods of measurements of immunity characteristics of information technology equipment” 1998; Including:

•EN 61000-4-2 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 2: Electrostatic discharge immunity test”

•EN 61000-4-3 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 3: Radiated, Radio-Frequency, Electromagnetic Field Immunity Test”

•EN 61000-4-4 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 4: Electrical fast transient/burst immunity test”

•EN 61000-4-5 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 5: Surge immunity test”

•EN 61000-4-6 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 6: Conducted disturbances induced by radio-frequency fields immunity test”

•EN 61000-4-8 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 8: Conducted disturbances induced by power frequency magnetic fields immunity test”

•EN 61000-4-11 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 11: Voltage dips, short interruptions and voltage variations immunity tests”

And:

•EN 61000-3-2 “Electromagnetic compatibility (EMC) Part 3, Section 2: Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)” 2000;

•EN 61000-3-3 “Electromagnetic compatibility (EMC) Part 3, Section 3: Limitations of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current up to and including 16 A and not subject to conditional connection” 1995;

Council Directive 2006/95/EC and amended by M1 and C1 on Low Voltage Equipment Safety;

EN 60950 “Safety of information technology equipment, including electrical business equipment”

The Technical Construction file required by this Directive is maintained at the corporate headquarters of Planar Systems, Inc., 1195 NW Compton Drive, Beaverton, OR 97006.

Date of Declaration: March 2009

viii	CinemaWall XP-50/XP-65 Installation/Operation Manual

FCC PART 15:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

INDUSTRY CANADA (ICES-003):

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

IMPORTANT RECYCLE INSTRUCTIONS

Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws.

For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG.

For lamp specific disposal information check WWW.LAMPRECYCLE.ORG.

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT (Applicable throughout the European Union and other European countries with separate collection programs)

This symbol found on your product or on its packaging, indicates that this product should not be treated as household waste when you wish to dispose of it. Instead, it should be handed over to an applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment and human health, which could otherwise be caused by inappropriate disposal of this product. The recycling of materials will help to conserve natural resources. This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

CinemaWall XP-50/XP-65 Installation/Operation Manual

ix

Notes:

x	CinemaWall XP-50/XP-65 Installation/Operation Manual

	Table of Contents
RuncoCare™ Standard Two Year Limited Warranty ...................................................		iii
Important Safety Instructions .......................................................................................		vii
Compliance Information ..............................................................................................		viii
1.	Introduction ...............................................................................................................	1
	About This Manual .......................................................................................................	1
	Target Audience .....................................................................................................	1
	If You Have Comments About This Manual.............................................................	1
	Textual and Graphic Conventions ...........................................................................	1
	Using This Manual ........................................................................................................	2
	Description, Features and Benefits ...............................................................................	3
	Key Features and Benefits ......................................................................................	3
	Parts List ...............................................................................................................	4
2.	Controls and Functions ............................................................................................	5
	CinemaWall at a Glance ...............................................................................................	5
	Controls and Indicators...........................................................................................	5
	Connectors.............................................................................................................	7
	CinemaWall Remote Control ........................................................................................	9
3.	Installation ...............................................................................................................	11
	Remote Control ..........................................................................................................	11
	Notes on Batteries ................................................................................................	11
	Quick Setup ...............................................................................................................	12
	Installation Considerations ..........................................................................................	13
	High-Altitude Operation ........................................................................................	13
	Mounting the CinemaWall on a Wall or Table Stand ..............................................	13
	Ambient Light .......................................................................................................	14
	Ventilation.............................................................................................................	14
	Other Considerations ............................................................................................	15
	Connections to the CinemaWall .................................................................................	16
	Connecting Source Components to the CinemaWall.............................................	16
	RS-232 Controller Connection ..............................................................................	19
	Connecting External Speakers (Optional) ..............................................................	19
	Connecting AC Power ..........................................................................................	20

CinemaWall XP-50/XP-65 Installation/Operation Manual

xi

4.	Operation .................................................................................................................	21
	Turning on the Power .................................................................................................	21
	Changing the OSD Language .....................................................................................	21
	Setting the Day and Time ...........................................................................................	21
	Setting the Computer Display Properties ....................................................................	22
	Selecting an Input Source ..........................................................................................	23
	Changing the Aspect Ratio .........................................................................................	23
	Using Picture-In-Picture (PIP) .....................................................................................	26
	Activating PIP .......................................................................................................	26
	Swapping the Main and PIP Images .....................................................................	26
	Selecting a PIP Target Screen or Input Source......................................................	27
	Changing the PIP Window Position.......................................................................	27
	Using the On-Screen Menus ......................................................................................	27
	Menu Navigation...................................................................................................	27
	PICTURE ..............................................................................................................	30
	POS./SIZE ............................................................................................................	35
	SOUND ................................................................................................................	37
	SET UP.................................................................................................................	38
	OPTIONS..............................................................................................................	46
	Using Digital Zoom .....................................................................................................	51
5.	Maintenance and Troubleshooting ........................................................................	53
	Cleaning .....................................................................................................................	53
	Cleaning the Display Panel Body and Remote Control ..........................................	53
	Cleaning the Screen..............................................................................................	53
	Cleaning the Vents................................................................................................	53
	Troubleshooting Tips ..................................................................................................	54
6.	Serial Communications ..........................................................................................	55
	RS-232 Connection and Port Configuration ...............................................................	55
	Serial Command Syntax .............................................................................................	55
	Examples..............................................................................................................	55
7.	Specifications ..........................................................................................................	59
	CinemaWall Specifications .........................................................................................	59
	CinemaWall Dimensions .............................................................................................	60
	Supported Timings .....................................................................................................	62
APPENDIX A. Default Settings ...................................................................................		A-1

xii	CinemaWall XP-50/XP-65 Installation/Operation Manual

List of Figures

2-1. CinemaWall XP-50 Front-Panel Controls and Indicators ...............................................		5
2-2. CinemaWall XP-65 Front-Panel Controls and Indicators ...............................................		5
2-3. CinemaWall Rear Panel ................................................................................................		7
2-4. CinemaWall Remote Control.........................................................................................		9
3-1. Ventilation Requirements for Enclosure Mounting .......................................................		14
3-2. HDMI Source Connections .........................................................................................		16
3-3. RGB and Component Video Connections ..................................................................		17
3-4. Analog RGB Connections...........................................................................................		18
3-5. RS-232 Control System Connection...........................................................................		19
3-6. External Speaker Connection .....................................................................................		19
3-7. AC Power Connection................................................................................................		20
4-1. OSD Menu Structure for CinemaWall..........................................................................		28
4-2. Typical Gray Bar Pattern for Adjusting Picture Level (Contrast) ...................................		31
4-3. Typical PLUGE Pattern for Adjusting Brightness .........................................................		32
4-4.	Typical Color Bar Pattern for Adjusting Color Saturation and Tint................................	33
4-5.	Typical Test Pattern for Adjusting Sharpness..............................................................	34
7-1.	CinemaWall Model XP-50 Dimensions (with Optional Table Stand) .............................	60
7-2.	CinemaWall Model XP-65 Dimensions (with Optional Table Stand) .............................	61

CinemaWall XP-50/XP-65 Installation/Operation Manual

xiii

List of Figures

Notes:

xiv	CinemaWall XP-50/XP-65 Installation/Operation Manual

1. Introduction

This Owner’s Manual describes how to install, set up and operate a Runco CinemaWall XP-50/XP-65 Flat-Panel Plasma Display Monitor.

Throughout this manual, the Runco CinemaWall XP-50/XP-65 Flat-Panel Plasma Display Monitor are referred to collectively as the “CinemaWall.” Except where otherwise indicated, the information in this manual applies to both CinemaWall models.

1.1

About This Manual

Runco has prepared this manual to help home theater installers and end users get the	Target Audience
most out of the CinemaWall.
Runco has made every effort to ensure that this manual is accurate as of the date it was
printed. However, because of ongoing product improvements and customer feedback, it
may require updating from time to time. You can always find the latest version of this and
other Runco product manuals on-line, at www.runco.com.
Runco welcomes your comments about this manual. Send them to [e-mail].	If You Have Comments
	About This Manual...
Text Conventions: The following conventions are used in this manual, in order to clarify	Textual and Graphic
the information and instructions provided:	Conventions
• Remote control button identifiers are set in upper-case bold type; for example, “Press
EXIT to return to the previous menu.”
• Computer input (commands you type) and output (responses that appear on-screen) is
shown in monospace (fixed-width) type; for example: “To change the aspect ratio to
Letterbox, send the command DAM:ZOOM.”
• All keys with functional names are initial-capped, set in bold type and enclosed in angle
brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc>
and <Tab>.
• <Enter> indicates that you may press either the RETURN or ENTER key on your
computer keyboard if it has both keys.
In addition to these conventions, underlining, boldface and/or italics are occasionally used
to highlight important information, as in this example:
A carriage return must be used after each command or string.
Note

CinemaWall XP-50/XP-65 Installation/Operation Manual

1

Introduction

Graphic Conventions: These symbols appear in numerous places throughout the manual, to emphasize points that you must keep in mind to avoid problems with your equipment or injury:

	Tip	TIPS highlight time-saving short cuts and helpful guidelines for using
		certain features.
	Note	NOTES emphasize text with unusual importance or special
		significance. They also provide supplemental information.
	Caution	CAUTIONS alert users that a given action or omitted action can
		degrade performance or cause a malfunction.
	WARNING	WARNINGS appear when a given action or omitted action can result
		in damage to the equipment, or possible non-fatal injury to the user.
	DANGER!	DANGER appears when a given action can cause severe injury or
		death.

1.2

Using This Manual

Use the following table to locate the specific information you need in this manual.

If you need...	... Turn to page:
Information about obtaining service	iv
General information about the CinemaWall	3
XP-50/XP-65 Flat-Panel Plasma Display Monitor
Installation instructions	11
First-time configuration instructions	21
Advanced configuration instructions	38
Troubleshooting tips	54
Specifications for the CinemaWall XP-50/XP-65	59
Flat-Panel Plasma Display Monitor

2	CinemaWall XP-50/XP-65 Installation/Operation Manual

Introduction

The CinemaWall XP-50/XP-65 Flat-Panel Plasma Display Monitor takes picture quality to a whole new level, boasting our brightest picture, best contrast ratio, deepest black levels and most spot-on high definition colorimetry ever! In addition, sophisticated 16-bit digital video processing, a new milestone, results in 4096 steps of graduation for seamless images completely devoid of the primitive “solarization” and “stair stepping” characteristics previously plaguing digital flat panel displays.

The CinemaWall features all of the Runco technologies you have come to expect from the World's Finest Home Theater Products. Discrete, multiple aspect ratio control includes VirtualWide™ for viewing 4:3 content in widescreen without appreciable picture degradation, as well as ISF(ccc) calibration modes to easily maintain ISF standards. The automation interface includes RS-232 control with discrete aspect ratio, input and power on/off selection.

The CinemaWall not only represents a leap forward in high definition flat-panel technology, but our engineering advances in plasma design ensure that it will enjoy a long life in any installation, with operation extending to as much as 60,000 hours. At less than 4-1/4 inches thin, the CinemaWall provides unlimited installation flexibility as well.

The CinemaWall offers these key features and benefits:

•16:9 Native Resolution: 1920 x 1080

•Multiple Aspect Ratios with VirtualWide™ Mode

•Less than 4-1/4 inches thin

•High-altitude compliant to 9,000 feet

•Exceptional detail and artifact-free video enhancement

•ViVix™ video processing with 3:2 film detection circuitry

1.3

Description, Features and Benefits

Key Features and Benefits

CinemaWall XP-50/XP-65 Installation/Operation Manual

3

Introduction

Parts List Your CinemaWall is shipped with the following items. If any items are missing or damaged, please contact your Runco dealer or Runco Customer Service at (800) 23-RUNCO.

•CinemaWall XP-50/XP-65 Flat-Panel Plasma Display Monitor

•AC Power Cord

•Remote Control Unit and two (2), AA-size batteries

•CinemaWall XP-50/XP-65 Installation/Operation Manual (this document)

Optional Accessories – XP-50:

•Wall Mount Kit (part number 956-0081-00)

•Table Stand (part number 956-0082-00)

Optional Accessories – XP-65:

•Wall Mount Kit (part number 956-0103-00)

•Table Stand (part number 956-0105-00)

4	CinemaWall XP-50/XP-65 Installation/Operation Manual

2. Controls and Functions

Figure 2-1 and Figure 2-2 show the CinemaWall front-panel controls and indicators.

2 (behind	4
front bezel)

3

1

2.1

CinemaWall at a Glance

Controls and Indicators

Figure 2-1. CinemaWall XP-50 Front-Panel Controls and Indicators

3	4
2
(behind
front bezel)
	1

Figure 2-2. CinemaWall XP-65 Front-Panel Controls and Indicators

CinemaWall XP-50/XP-65 Installation/Operation Manual

5

Controls and Functions

1.DISPLAY STAND

Optional accessory for table-top installations.

2.POWER BUTTON

Connects or disconnects the display panel from the AC power source.

3.STANDBY/ON INDICATOR

-Lights solid green to indicate normal operation;

-Flashes green to indicate that a Power-On Screen delay has been set (waiting to power up);

-Lights orange to indicate that the PC INPUT is currently selected and the power management function is active (no signal present);

-Lights red to indicate that the CinemaWall is in standby mode.

4.REMOTE CONTROL SENSOR

Receives the signals from the remote control.

6	CinemaWall XP-50/XP-65 Installation/Operation Manual

Controls and Functions

Figure 2-3 shows the rear-panel connector locations on the CinemaWall.

Connectors

XP-50	6

XP-65

6

A	B	A	B	R AUDIO L	PR/CR/R PB/CB/B	Y/G
								AUDIO
				COMPONENT/RGB IN
	AV IN		AV IN
	SLOT1		SLOT2		SLOT3	PC	IN	SERIAL

1

2

3

4

5

Figure 2-3. CinemaWall Rear Panel

1.SLOT 1 (Dual HDMI input)

Two, HDCP-compliant digital video inputs.

2.SLOT 2 (Dual HDMI input)

Two, HDCP-compliant digital video inputs.

CinemaWall XP-50/XP-65 Installation/Operation Manual

7

Controls and Functions

3.SLOT 3 (COMPONENT/RGB input)

Video/audio input (3 x BNC, 2 x RCA) for connecting either RGB (with sync on green) or component high-definition television signals.

4.PC IN

Provides a 15-pin VGA connection and a 3.5-mm, stereo audio connection to a personal computer. The CinemaWall automatically detects the signal resolution.

5.SERIAL

A male, 9-pin D-sub connector for interfacing with a PC or home theater automation/control system.

6.POWER INPUT

Connect the CinemaWall to AC power here.

8	CinemaWall XP-50/XP-65 Installation/Operation Manual

Controls and Functions

Figure 2-4 shows the CinemaWall remote control and describes its functionality.

SURROUND button

Press the SURROUND button to turn surround-sound mode on or off.

Note:

The surround settings are memorized separately for each AUDIO MENU setting (STANDARD, DYNAMIC, CLEAR).

ACTION button

Press ACTION to confirm a menu selection.

ASPECT button

Press this button repeatedly to select an aspect ratio.

POWER button

The CinemaWall must first be plugged into the wall outlet and turned on at the power switch.

Press this button to turn the CinemaWall on from Standby mode. Press it again to put the CinemaWall into Standby mode.

POS./SIZE button

Press this button to display the

POS./SIZE menu.

PICTURE button

Press this button to display the PICTURE

menu.

MUTE

Press this button to mute the sound.	RESET	RETURN
Press again to reactivate sound.
Sound is also reactivated when power is
turned off or volume level is changed.

RESET button

Press this button to restore settings for the current menu to their factorydefault values.

Adjustment/Selection buttons

Use these buttons to select menu items and adjust settings.

INPUT button

Press to select INPUT1A, INPUT1B, INPUT2A, INPUT 2B, INPUT3 and PC input slots sequentially.

MULTI PIP buttons

Use these buttons to control various aspects of multi-PIP (picture-in-picture) operation.

ON OFF

SURROUND ON

OFF TIMER button

The CinemaWall can be preset to switch to stand-by after a fixed period. The setting changes to

30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed.

30 60 90

0

When three minutes remain,

“OFF TIMER 3” appears on-screen. The off timer is cancelled if a power interruption occurs.

SET UP button

Press this button to display the SET UP menu.

SOUND button

Press this button to display the SOUND menu.

Volume Adjustment buttons

Press + or – to increase or decrease the sound volume level.

RETURN button

Press RETURN to return to the previous menu screen.

RECALL button

Press RECALL to display the current operating status:

1Input

2Aspect Ratio

3Off timer

The off timer indicator is displayed only when the off timer has been set. 4 Clock display

	PC		1
	4:3		2
4	10:00
	OFF TIMER	90	3

Digital Zoom

Press this button to display the digital image zoom controls.

Figure 2-4. CinemaWall Remote Control

2.2

CinemaWall Remote Control

CinemaWall XP-50/XP-65 Installation/Operation Manual

9

Controls and Functions

Notes:

10	CinemaWall XP-50/XP-65 Installation/Operation Manual

3. Installation

To install batteries in the remote control:

1.Press on the tab on the battery compartment cover and lift the cover in the direction of the arrow.

2.Insert the included batteries. Ensure that the polarities correctly match the and markings inside the battery compartment.

3.Close the battery compartment cover and press the tab on the cover until it clicks in place.

3.1

Remote Control

1

2

3

“AA” size

-

+	+
	-

• When installing batteries, make sure that the battery polarities are correct.

Notes on Batteries

•Do not mix an old battery with a new one or different types of batteries.

•If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage.

•Do not drop the remote control or expose it to moisture or high temperature.

•The remote control may malfunction under a fluorescent lamp. If that occurs, move the plasma display away from the fluorescent lamp.

•Make sure that there is nothing obstructing the infrared beam between the remote control and the IR receiver on the plasma display.

Note	The signal from the remote control can be reflected by walls or
	other surfaces.

•If the effective range of the remote control decreases, or it stops working, replace the batteries with new ones.

•Ambient conditions may possibly impede the operation of the remote control. If this happens, point the remote control at the plasma display and repeat the operation.

CinemaWall XP-50/XP-65 Installation/Operation Manual

11