Runco CW-42HD, CW-50XA, CW-61 User Manual

0 (0)

OW N E R ’S OP E R A T I N G MA N U A L

CW-42HD

CW-50XA

CW-61

Flat Panel Plasma Display Monitor

with

THREE YEAR LIMITED WARRANTY

For Plasma Displays

Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces “The World’s Finest Home Theater Products.” With proper installation, setup and care, you should enjoy many years of unparalleled video performance.

This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your other important documents.

WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

SERVICE LABOR: Runco will pay for service labor by a Runco Authorized Service Center when needed as a result of a manufacturing defect for a period of three (3) years from the effective date of delivery to the end user (excluding the plasma glass panel).

PARTS (not including plasma glass panel): Runco will provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship for a period of three (3) years from the effective date of delivery to the end user. Such replacement parts are then subsequently warranted for the remaining portion (if any) of the original warranty period.

PLASMA GLASS PANEL: Runco will pay for service labor by a Runco Authorized Service Center when needed as a result of a manufacturing defect for a period of one (1) year from the effective date of delivery to the end user. In addition, Runco will provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship for a period of one (1) year from the effective date of delivery to the end user. Such replacement parts are then subsequently warranted for the remaining portion (if any) of the original warranty period.

WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

Image burn-in on plasma display panels is specifically excluded from coverage under this Limited Warranty. Image burn-in is the result of misuse of the product and therefore cannot be repaired under the terms of this Limited Warranty.

Normal viewing material such as television/satellite broadcasts, videotape or DVDs (not put into pause for extended periods of time) will not cause damage to your display under normal conditions. Many DVD players are also equipped with screen savers for this reason.

TO AVOID IMAGE RETENTION (Burn-in): Please ensure that still images are left on your plasma display panel for no more than a few minutes. Also ensure that images displayed in the 4:3 aspect ratio mode (black or gray stripes, but no picture information is present on the left and right edges of the screen) are used as infrequently as possible. This will prevent permanent image burns on your plasma display panel, which can be seen permanently under certain conditions once burn-in has occurred.

The types of images to avoid include video games, still images and computer screens with stationary tool bars and icons. (This is why computers are equipped with screen savers – to prevent still images from burning into the monitor’s phosphors after being displayed continuously for an extended period of time).

This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and does not cover normal maintenance. This Limited Warranty does not cover cabinets or any appearance items; failure resulting from accident, misuse, abuse, neglect, mishandling, misapplication, faulty or improper installation or setup adjustments; improper maintenance, alteration, improper use of any input signal; damage due to lightning or power line surges, spikes and brownouts; damage that occurs during shipping or transit; or damage that is attributed to acts of God. In the case of remote control units, damage resulting from leaking, old, damaged or improper batteries is also excluded from coverage under this Limited Warranty.

Runco CinemaWall Owner’s Operating Manual

iii

CAUTION: THIS LIMITED WARRANTY ONLY COVERS RUNCO PRODUCTS PURCHASED FROM RUNCO AUTHORIZED DEALERS. ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. MOREOVER, DAMAGE RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER INSTALLATION OR SETUP IS SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED WARRANTY. IT IS IMPERATIVE THAT INSTALLATION AND SETUP WORK BE PERFORMED ONLY BY AN AUTHORIZED RUNCO DEALER TO PROTECT YOUR RIGHTS UNDER THIS WARRANTY. THIS WILL ALSO ENSURE THAT YOU ENJOY THE FINE PERFORMANCE OF WHICH YOUR RUNCO PRODUCT IS CAPABLE WHEN INSTALLED AND CALIBRATED BY RUNCO AUTHORIZED PERSONNEL.

RIGHTS, LIMITS AND EXCLUSIONS:

Runco limits its obligations under any implied warranties under state laws to a period not to exceed the warranty period. There are no express warranties. Runco also excludes any obligation on its part for incidental or consequential damages related to the failure of this product to function properly. Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages. So the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

EFFECTIVE WARRANTY DATE:

This warranty begins on the effective date of delivery to the end user. For your convenience, keep the original bill of sale as evidence of the purchase date.

IMPORTANT -- WARRANTY REGISTRATION:

Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach you promptly if we should discover a safety problem or product update for which you must be notified.

CONTACT A RUNCO AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE:

Repairs made under the terms of this Limited Warranty covering your Runco video product will be performed at the location of the product, during usual working hours, providing location of product is within normal operating distance from a Runco Authorized Service Center. In some instances it may be necessary for the product to be returned to the Runco factory for repairs. If, solely in Runco’s judgment, location of product to be repaired is beyond normal operating distance of the closest Runco Authorized Service Center, or the repair requires the unit be returned to the Runco factory, it is the owner’s responsibility to arrange for shipment of the product for repair. These arrangements must be made through the selling Runco Dealer. If this is not possible, contact Runco directly for a Return Authorization number and shipping instructions. Runco will return product transportation prepaid in the United States, unless no product defect is discovered. In that instance, shipping costs will be the responsibility of the owner.

© Copyright 2006 Runco International. This document contains proprietary information protected by copyright, trademark and other intellectual property laws. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.

Reflection, Enhanced GEN3, DHD, Vivix, Virtual Cinema, CineWide, AutoScope, O-Path, CinOptx, LiveLink, CSMS, SuperOnyx and VirtualWide are trademarks of Runco International. All other trademarks and registered trademarks used in this document are the property of their respective owners.

Runco International products are manufactured under one or more of the following patents: US. Patent 6755540 and Other Patents Pending.

iv	Runco CinemaWall Owner’s Operating Manual

ADDITIONAL INFORMATION:

To locate the name and address of the nearest Runco Authorized Service Center, or for additional information about this Limited Warranty, please call or write:

RUNCO INTERNATIONAL, INC.

Attn: Customer Service Department

2900 Faber Street

Union City, CA 94587

Ph: (510) 324-7777

Fax: (510) 324-9300

Toll Free: (800) 23-RUNCO

RUNCO VIDEO-PRODUCT INFORMATION

RETAIN THIS INFORMATION FOR YOUR RECORDS

_________________________________________________________	________________________________________
Model Purchased	Date

____________________________________________________________________________________________________________

Serial Number

____________________________________________________________________________________________________________

Runco Authorized Dealer Name

____________________________________________________________________________________________________________

Address
____________________________________________	__________________	________________________
City	State/Province	Postal Code
____________________________________________	_________________________________________________________
Phone	Fax

Runco CinemaWall Owner’s Operating Manual

Safety Precautions

Thank you for your purchase of this quality Runco product! It has been designed to provide you with the quality of video that is expected in a home theater. This manual is your guide through the menus and operation. For the best performance, please read it carefully and keep it handy for future reference.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

WARNING

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

To turn off main power, be sure to remove the plugs from power outlets. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

This equipment has been tested and found to comply with the limits for a Class ‘B’ digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Installation Manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference, in which case the user will be required to correct the interference at his own expense.

DOC Compliance Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Please read and follow the safety precautions listed below to ensure the equipment is free from damage, and to ensure that no injury will occur as a result of improper use.

•Do not insert any object, especially metal or liquids, into the plasma display.

•Do not place any objects containing water or any other liquid on top of the plasma display.

•Do not place the units in direct sunlight, near heaters or in extremely dusty or humid locations.

•Do not install this system outdoors or otherwise exposed to the elements.

•Do not place heavy objects on top of the plasma display.

•If the power cord is damaged or frayed in any way, electrical shock and/or fire may result. Do not place objects on the power cord, and keep the cord away from heat-emitting devices. Should the power cord become damaged in any way, please contact your Runco Dealer for a replacement cord.

•Do not remove the cover of the plasma display for any reason. If any problems arise with the unit, please contact a Runco Dealer or Runco International for service. Removing the covers will void the warranty.

vi	Runco CinemaWall Owner’s Operating Manual

	Table of Contents
THREE YEAR LIMITED WARRANTY .............................................................................		iii
Safety Precautions .........................................................................................................		vi
1.	Introduction ...............................................................................................................	1
	About This Manual .......................................................................................................	1
	Target Audience .....................................................................................................	1
	If You Have Comments About This Manual.............................................................	1
	Textual and Graphic Conventions ...........................................................................	1
	Using This Manual ........................................................................................................	2
	Description, Features and Benefits ...............................................................................	3
	Key Features and Benefits ......................................................................................	3
	Parts List ...............................................................................................................	4
2.	Controls and Functions ............................................................................................	5
	CinemaWall at a Glance ...............................................................................................	5
	Controls and Indicators...........................................................................................	5
	Connectors ............................................................................................................	6
	CinemaWall Remote Control ........................................................................................	8
3.	Installation ...............................................................................................................	13
	Remote Control ..........................................................................................................	13
	Notes on Batteries ................................................................................................	13
	Notes on Remote Control Operation.....................................................................	13
	Quick Setup ...............................................................................................................	15
	Installation Considerations ..........................................................................................	16
	Mounting the CinemaWall on a Wall or Table Stand ..............................................	16
	Ambient Light .......................................................................................................	16
	Ventilation .............................................................................................................	17
	Other Considerations ............................................................................................	17
	Connections to the CinemaWall .................................................................................	18
	Connecting the CinemaWall to Source Components.............................................	18
	Audio Connections ...............................................................................................	19
	RS-232 Controller Connection ..............................................................................	20
	Cable Management ..............................................................................................	21

Runco CinemaWall Owner’s Operating Manual

vii

Table of Contents

4.	Operation .................................................................................................................	23
	Turning on the Power .................................................................................................	23
	Changing the OSD Language .....................................................................................	23
	Setting the PC Display Properties ...............................................................................	24
	Using the On-Screen Menus ......................................................................................	25
	Main Menu ...........................................................................................................	27
	Picture Adjust .......................................................................................................	27
	Audio ...................................................................................................................	34
	Image Options ......................................................................................................	34
	Install ....................................................................................................................	36
	Function ...............................................................................................................	38
	Signal Info ............................................................................................................	41
5.	Maintenance and Troubleshooting ........................................................................	43
	Troubleshooting Tips ..................................................................................................	43
6.	Serial Communications ..........................................................................................	45
	RS-232 Connection and Port Configuration ...............................................................	45
	Serial Command Syntax .............................................................................................	45
7.	Specifications ..........................................................................................................	47
	CinemaWall Specifications .........................................................................................	47
	CinemaWall Dimensions .............................................................................................	49
	Computer/Video Signal Compatibility .........................................................................	52

viii	Runco CinemaWall Owner’s Operating Manual

List of Figures
2-1. CinemaWall Controls and Indicators .............................................................................	5
2-2. CW-42HD Connector Panel .........................................................................................	6
2-3. CW-50XA and CW-61 Connector Panel .......................................................................	7
2-4. CW-42HD and CW-50XA Remote Control ...................................................................	8
2-5. CW-61 Remote Control..............................................................................................	10
3-1. Available Range of the Remote Control ......................................................................	13
3-2. Ventilation Requirements for Enclosure Mounting .......................................................	17
3-3. CinemaWall Connection Diagram ...............................................................................	18
3-4. RS-232 Control System Connection...........................................................................	20
3-5. Installing the Cable Clamps ........................................................................................	21
4-1. Attaching the Ferrite Cores to the Power Cable ..........................................................	23
4-2. CinemaWall OSD Menu Structure...............................................................................	26
4-3. Typical PLUGE Pattern for Adjusting Brightness .........................................................	28
4-4. Typical Gray Bar Pattern for Adjusting Contrast ..........................................................	29
4-5. Typical Color Bar Pattern for Adjusting Color Saturation and Tint................................	29
4-6. Typical Test Pattern for Adjusting Sharpness..............................................................	31
7-1. CinemaWall Model CW-42HD Dimensions .................................................................	49
7-2. CinemaWall Model CW-50XA Dimensions ..................................................................	50
7-3. CinemaWall Model CW-61 Dimensions ......................................................................	51

Runco CinemaWall Owner’s Operating Manual

List of Figures

Notes:

x	Runco CinemaWall Owner’s Operating Manual

1. Introduction

This Owner’s Manual describes how to install, set up and operate the Runco CinemaWall Flat-Panel Plasma Display Monitor (Models CW-42HD, CW-50XA and CW-61). Throughout this manual, the Runco CinemaWall Flat-Panel Plasma Display Monitor is referred to simply as the “CinemaWall.”

1.1

About This Manual

Runco has prepared this manual to help home theater installers and end users get the	Target Audience
most out of the CinemaWall.
Runco has made every effort to ensure that this manual is accurate as of the date it was
printed. However, because of ongoing product improvements and customer feedback, it
may require updating from time to time. You can always find the latest version of this and
other Runco product manuals on-line, at www.runco.com.
Runco welcomes your comments about this manual. Send them to techpub@runco.com.	If You Have Comments
	About This Manual...
Text Conventions: The following conventions are used in this manual, in order to clarify	Textual and Graphic
the information and instructions provided:	Conventions
• Remote control button identifiers are set in upper-case bold type; for example, “Press
EXIT to return to the previous menu.”
• All keys with functional names are initial-capped, set in bold type and enclosed in angle
brackets. These keys are the following: <Return>, <Spacebar>, <Control>, <Esc>
and <Tab>.
• <Return> indicates that you may press either the RETURN or ENTER key on your
computer keyboard if it has both keys.
• Computer input (commands you type) and output (responses that appear on-screen) is
shown in monospace (fixed-width) type; for example: “To change the aspect ratio to
Anamorphic, type DF 80 60 51 01 05 16.”
In addition to these conventions, underlining, boldface and/or italics are occasionally used
to highlight important information, as in this example:

To prevent image retention (burn-in) on your display, ALWAYS use

WARNING a screen saver and set it to the shortest possible time.

Runco CinemaWall Owner’s Operating Manual

Introduction

Graphic Conventions: These symbols appear in numerous places throughout the manual, to emphasize points that you must keep in mind to avoid problems with your equipment or injury:

	Tip	TIPS highlight time-saving short cuts and helpful guidelines for using
	Tip	certain features.
	Note	NOTES emphasize text with unusual importance or special
	Note	significance. They also provide supplemental information.
	Caution	CAUTIONS alert users that a given action or omitted action can
	Caution	degrade performance or cause a malfunction.
		degrade performance or cause a malfunction.
	WARNING	WARNINGS appear when a given action or omitted action can result
	WARNING	in damage to the equipment, or possible non-fatal injury to the user.
	DANGER!	DANGER appears when a given action can cause severe injury or
	DANGER!	death.
		death.

1.2

Using This Manual

Use the following table to locate the specific information you need in this manual.

If you need...	... Turn to page:

Information about obtaining service	iv

General information about the CinemaWall	3
Flat-Panel Plasma Display Monitor

Installation instructions	13

First-time configuration instructions	23

Advanced configuration instructions	36

Troubleshooting tips	43

Specifications for the CinemaWall Flat-Panel	47
Plasma Display Monitor

2	Runco CinemaWall Owner’s Operating Manual

Introduction

The CinemaWall Flat-Panel Plasma Display Monitor combines high-resolution quality and affordability into one package. It has all of the features that one has come to expect from a Runco product, including high-quality video processing, aspect ratio control and ease of use. The advanced Runco processing inside the CinemaWall combined with its high native resolution allows the most accurate scaling for all types of signals, including DVD (progressive or interlaced), all currently available HDTV formats, and computers.

For video originally made in film, the CinemaWall has built-in 3:2 pulldown for the sharpest and most artifact-free images possible. Like all Runco plasmas, it can be mounted on a wall, ceiling or placed on a tabletop and bright enough for use in any lighting situation: Its size is such that it can be the centerpiece of many home theaters.

In addition, the CinemaWall Flat-Panel Plasma Display Monitor is engineered with ISF™ calibration standards for the purest video performance. It also features closed captioning and multi-language support.

The CinemaWall Flat-Panel Plasma Display Monitor offers up to 1365 x 768 resolution and includes Runco’s discrete aspect ratio control with VirtualWide™ mode to fill a 16:9 screen with standard 4:3 images without loss of picture quality. Also included are discrete source, aspect ratio and power selection and an RS-232 interface for whole house or automated control system integration.

The CinemaWall has been carefully engineered for superb video performance. At less than five inches deep, it can be wall-mounted or used on a tabletop stand.

The CinemaWall offers these key features and benefits:

•16:9 Native Resolution: CW-42HD = 1024 x 768; CW-50XA and CW-61 = 1365 x 768

•Screen Size (diagonal): CW-42HD = 42 inches; CW-50XA = 50 inches; CW-61 = 61 inches

•Multiple Aspect Ratios with VirtualWide™ Mode

•Less than 5 inches deep

•Dual HDMI Inputs with High-bandwidth Digital Content Protection (HDCP)

•HDTV Compatible

•Exceptional detail and artifact-free video enhancement

•Vivix™ video processing with 3:2 film detection circuitry

•High performance at altitudes up to 2,740 meters (9,000 feet)

1.3

Description, Features and Benefits

Key Features and Benefits

Runco CinemaWall Owner’s Operating Manual

Introduction

Parts List Your CinemaWall is shipped with the following items. If any items are missing or damaged, please contact your Runco dealer or Runco Customer Service at (800) 23-RUNCO.

•CinemaWall Flat-Panel Plasma Display Monitor

•AC Power Cord

•Remote Control Unit

•Batteries for Remote Control Unit: 2xAAA-size (CW-42HD and CW-50XA) or 3xAA-size (CW-61)

•Warranty information and registration card

•Runco CinemaWall Owner’s Operating Manual (this document)

•Ferrite cores (2)

•Cable Clamps

•Safety metal fittings

•Screws for safety metal fittings

Use the safety fittings to fasten the CinemaWall to a wall when Note using the optional tablestand. This prevents tipping due to external

shock. Use the supplied screws to fasten the safety fittings to the holes in the back of the plasma.

Optional Accessories:

•Wall Mount Kit

•Table Stand

4	Runco CinemaWall Owner’s Operating Manual

2. Controls and Functions

Figure 2-1, Figure 2-2 and Figure 2-3 show the locations of the CinemaWall controls, indicators and connectors.

2.1 CinemaWall at a Glance

Controls and Indicators

Located on bottom

of Plasma Located on bottom of Plasma

VOLUME				INPUTSELECT
MENU / ENTER DOWN	UP	LEFT/-	RIGHT/+	/EXIT

Figure 2-1. CinemaWall Controls and Indicators

1.POWER BUTTON

Turns the monitor’s power on and off.

2.REMOTE CONTROL SENSOR

Receives the signals from the remote control.

3.POWER/STANDBY INDICATOR

-Lights red to indicate that the CinemaWall is in standby mode;

-Lights green to indicate normal operation;

-Flashes red to indicate that the internal temperature is too high.

4.INPUT SELECT/EXIT

Press this button to switch inputs, or exit the current menu if an On-Screen Display (OSD) menu is visible.

Runco CinemaWall Owner’s Operating Manual

Controls and Functions

5.LEFT/– and RIGHT/+

These enlarge or reduce the image and function as CURSOR ( / ) buttons in OSD mode.

6.VOLUME DOWN and UP

These adjust the volume and function as CURSOR ( / ) buttons in OSD mode.

7.MENU/ENTER

Press this button to access the On-Screen Display (OSD) controls. Press this button during the display of the main menu to go to a submenu. Also used to select a highlighted menu item or confirm a changed setting.

The Power on/off switch does not disconnect the plasma display

WARNING completely from the supply mains.

Connectors

VIDEO AUDIO1

DVD/HD1

AUDIO2

DVD/HD2

PC/RGB

AUDIO 3

DVD/HD3

DVD/HD4

EXTERNAL CONTROL REMOTE

Cb/Pb

Y Cb/Pb Cr/Pr

D-SUB

Cr/Pr

HDMI

VIDEO

AUDIO1

DVD/HD1

AUDIO2

DVD/HD2

PC/RGB

AUDIO 3

DVD/HD3

DVD/HD4

EXTERNAL CONTROL

REMOTE

Cb/Pb

Cr/Pr

D-SUB

OUT

Cr/Pr

HDMI

(MONO)

Figure 2-2. CW-42HD Connector Panel

6	Runco CinemaWall Owner’s Operating Manual

Controls and Functions

RIGHT	LEFT	AC IN
+ -	-	+

2 1

Figure 2-3. CW-50XA and CW-61 Connector Panel

1.POWER INPUT (100 to 240 VAC)

Connect the CinemaWall to power here, using the included power cord.

2.EXTERNAL SPEAKER OUTPUTS

Connect optional, external speakers here. Maintain the correct polarity. Connect the (positive) and (negative) speaker wires to the EXT SPEAKER terminals on both the LEFT and RIGHT channels. Please refer to the owner’s manual for your speakers.

3.VIDEO1, 2 (RCA, S-Video)

Standard, Composite video and S-Video inputs for connecting a DVD player, satellite receiver, camcorder, laser disc player or Super VHS (S-VHS) VCR.

4.AUDIO1, AUDIO2, AUDIO3

Stereo, RCA-type audio inputs. You can associate each audio input with any video

input -- that is, specify which audio input becomes active when a given video source is selected. For more information, refer to Audio on page 34.

5.DVD/HD1

DVD/HD2

Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component inputs for connecting a DVD player or high-definition TV source.

For best results, do not run your DVD player in progressive mode.

Tip

6.PC/RGB (15-pin D-Sub)

Connect an analog RGB signal from a computer or DTV decoder here.

Runco CinemaWall Owner’s Operating Manual

Controls and Functions

2.2

CinemaWall Remote Control

7.DVD/HD3, DVD/HD4 (HDMI)

HDCP-compliant digital video input for connecting a DVD player, personal computer or HD tuner with a DVI or HDMI output.

8.EXTERNAL CONTROL (9-pin, male D-Sub)

A male, 9-pin D-sub connector for interfacing with a PC or home theater automation/control system.

9.REMOTE IN (3.5-mm mini phone jack, tip/ring/sleeve)

Wired input from an external remote control or infrared (IR) receiver.

10.REMOTE OUT (3.5-mm mini phone jack, tip/ring/sleeve)

Wired output to the REMOTE IN jack of another device; allows you to control both the CinemaWall and the other device using the same wired remote control.

Figure 2-4 and Figure 2-5 show the CinemaWall remote controls. The paragraphs that follow each figure describe their functionality.

OFF

	MENU
		EXIT
	LIGHT
VID	ASPECT	MUTE
1-2	ASPECT	MUTE
1-2
DVD-HD	DISPLAY	VOL +
1-4
RGB	AUTO	VOL -
RGB	OFF	VOL -
	OFF

Figure 2-4. CW-42HD and CW-50XA Remote Control

8	Runco CinemaWall Owner’s Operating Manual

Controls and Functions

1.IR OUTPUT INDICATOR

Lights when a button is pressed to indicate that an IR signal is being transmitted.

2.ON/OFF

Press to turn the CinemaWall on or off.

3.MENU

Press to select a highlighted menu item or confirm a changed setting.

4.Cursor Keys (, , , )

Use these buttons to select items or settings, adjust settings or switch display patterns.

5.LIGHT

Press to illuminate the buttons. (Not available on all models.)

6.EXIT

Press this button to exit the OSD controls in the main menu. Press this button during the display of a submenu to return to the previous menu.

7.VID 1-2

Press this button to select VIDEO 1 as the source. Press it again to select VIDEO 2.

8.ASPECT

Press this button to select an aspect ratio. (Not active for all signals.)

9.MUTE

Press to mute the audio output. Press it again to restore the sound.

10.DVD-HD 1-4

Press this button repeatedly to select a DVD/HD source.

11.DISPLAY

Displays the currently-selected aspect ratio and input on the screen.

12.VOL + / VOL –

Use these buttons to adjust the audio volume.

13.RGB

Press this button to select the PC/RGB input as the source.

14.AUTO OFF

Press this button to set the sleep timer. Press it repeatedly to scroll through the available options (30, 60, 90 or 120 minutes; or, select 0 to turn the timer off).

Runco CinemaWall Owner’s Operating Manual