RS 8802201 User Manual





Professionallyapprovedproducts.

User Manual

FULL HD

Video-Blackbox

Article no: 8802201

2

Index

A. Feature Description ................................................................................................ 3

B. Specification

........................................................................................................... 4

C.

Accessories ............................................................................................................ 4

D. Schematic Diagram of The Installation Steps

......................................................... 5

E. Product Function Introduction ................................................................................. 7

F. SD Card Installation ................................................................................................ 8

G. OSD Menu .............................................................................................................. 9

H. Remote Controller Description .............................................................................. 10

I. Recording / Stop Recording .................................................................................. 11

J. The RS component Player .................................................................................... 12

1. Operation icon introduction ............................................................................. 12

2. Capture ........................................................................................................... 12

3. Configuration .................................................................................................. 13

4. File backup ..................................................................................................... 15

5. Playback ......................................................................................................... 16

6. Progress bar ................................................................................................... 16

7. Play speed ...................................................................................................... 17

8. Volume control ................................................................................................ 17

9. G-SENSOR .................................................................................................... 17

10. Format ............................................................................................................ 17

K. Estimated Recording Time .................................................................................... 19

L. Appendix: Bright and dark spot on the LCD .......................................................... 20

3

A. Feature Description

 Full HD real-time recording (with H.264 compression technology)
 105° Wide-angle CMOS Lens
 2.5”TFT LCD

 GPS sensor
 Record video with sound inside and outside the car

 Compatible with SDHC Card up to 32GB
 Automatic loop recording
 Emergency recording, file save to separate area to prevent overwritten
 Built-in GPS for tracking speed and position
 Built-in G-Sensor, to automatically record footage in case of an accident
 Made in Taiwan, with a 1 year warrantee – the longest of any dash-camera

4

B. Specification

Items Description

Sensor CMOS

View Angle 105° Wide-angle

Resolution NTSC 30fps / PAL 25fps

V / A DC5V±5% / 1A

Operating tmp. -10ºC ~ +60ºC

Display 2.5” TFT LCD

Storage

4GB - 32 GB SDHC Card ( 『SanDisk』or『Transcend』 Class

10 or above is recommended)
Manner of
Recording

Automatic recording on power on,

Recording is stopped on power off

Recorded

content

Date, Time, Image, Sound,

G-Sensor data, GPS data

Storage Format

Proprietary format,

playback on device or bundled software

Audio Input Built-in microphone

Time setting

Internal calendar adjustable via GPS,

remote control or bundled software

G-Sensor Built-in 3D G-Sensor

C.

Accessories

Adapter / IR remote control / Software CD / Bracket / 3M sticker / 8 GB Class 10 SDHC
Card

5

D. Schematic Diagram of The Installation Steps

1. Install the device on the windshield using bundled 3M or suction cup mount

2. Find the optimal position of device on
the windshield

3. Adjust to the appropriate recording
angle

4. Plug in the DC5V Power Supply 5. Plug in the Cigarette charger

Sticker Adhesive Spot

Stick-Holder

6

6. Diagram of recommended device installation

Notice

(1). This device should be installed within the area of the windshield wipers
(2). Format the SD card before first-time use
(3). Set date and time on the OSD, or auto-calibration via GPS
(4). Set NTSC or PAL through OSD

Best location

Cigarette adapte

r

7

E. Product Function Introduction

Secure recording Menu Up Down Enter

SD card Slot

DC5V
Power input

Lens

8

F. SD Card Installation

(1). To format the memory card; please refer to the other chapter “Formatting the

memory card” for more detail.

Warning

(1). “SanDisk” or “Transcend” Class 10 or above SDHC cards are

recommended (4GB minimum)

(2). If memory card is not formatted using the bundled software, the device

will automatically erase all the data on the memory card and start
recording at default settings

(3). Please don’t use a Micro SD to SD card adapter for recording, to avoid

damage during recording

(4). Fragmentation of the memory card storage during writing is normal.

Regular inspection of the memory card and playback using bundled
software is recommended to ensure good read/write performance

9

G. OSDMenu

Press to open the OSD (On Screen Display) menu shown below:

1. Video standard: Click to choose NTSC / PAL

2. Time setting: Click to adjust clock

3. Display sleep: Click to set delay time of display sleep

4. Firmware Version: to show firmware version

NTSC / P AL

Time setting

Display sleep

Firmware version

10

H. Remote Controller Description

Display On/Off

Force Recording

Volume Down

Stop Voice Recording

Menu

Confirm

Stop Play

Pause

Up / Down

Left / Right

Speaker On/Of

f

Volume Up

11

I. Recording / Stop Recording

1. Power On/Recording
The device automatically starts on car power on.

Please allow 30 sec. for recording to start.

2. Power Off/Stop recording
When the car power is off, the device will stop recording video and sound. You can
take out the memory card and insert it in your computer to view the video.

3. Indication
Blinking red light indicates recording.
Fast blinking red light indicates activation of the secure recording feature.

12

J. The RS component Player

 This software requires DirectX 9.0 or above installed on your PC.

1. Operation icon introduction
Back to previous file

Previous image
Reward
Pause
Stop
Play
Next image
Next footage

2. Capture: Create a snapshot of current video frame

You can save a frame of your footage during playback of footage.
Click the button to take a snapshot of the current video frame.

The following window is shown, with the image captured shown on the right side. Snapshots are
saved as Bitmap images (*.bmp) in the application directory /Snapshot sub-folder.

(Snapshot file)

13

3. Configuration : configure default settings

Before using the first-time connect the SD Card to your computer to format the SD
card. Configure the desired video format (NTSC or PAL). Afterwards, you can
insert the SD card into the device and start recording.

14

1

Video
Quality

Default quality is high

2

Video Frame
Rate

25(PAL) / 30(NTSC)

3

Set
Password

Encrypt the SD card to prevent unauthorized access.
Password must be under 15 characters in length, for
example: 123456789123456
After setup, the password is required for playback,
configuration and formatting of the SD card.

★Note: password is case-sensitive;

Remember the password. Without password
footage cannot be retrieved.

4

Playback
Password

You can set a password for playback on the built-in
display of the device.

5

G-sensor
sensitivity

The G-Sensor can detect impact and active the
secure recording function automatically.
Set the sensitivity here. Choose Car or Truck. The
sensitivity has 5 options: Off / Very low / Low /
Normal / High / Very high.

6

Audio
Recording

Turn audio recording on/off.

15

4. File backup: click to backup footage.

Step1. Choose the source of the memory card.

Step2. Choose the footage you want to backup.

Step3

. Choose the target file format and the start and end points.

16

File format
(1) Proprietary file format

*.sd format

(2) AVI video (*.avi)

AVI format

★Note:

To keep G-Sensor data, use proprietary format.
AVI format doesn’t not contain G-sensor data (only
date/time/image/sound)

Step 4. Set the backup folder: default is C:\BlackBox

Step 5. Start backup

5. Playback: Open file

6. Progress bar:

Use the mouse and drag the car icon to view a particular time of the footage

17

7. Play speed:

Choose 2, 4 or 8 times normal playback
or 1/2, ¼ or 1/8 times normal playback.

8. Volume control:

Click +/- to adjust volume.

9. G-SENSOR

The integrated G-Sensor can detect impact and record 1-3 minutes of footage
automatically. This footage is protected to avoid files being overwritten.

10. Format:

Format memory card/Langue setting

(1)

X:

Detect vehicle horizontal

change.
(2)

Y:

Detect vehicle vertical change.

(3) Z:

Detect vehicle front/back change.

18

Warning

(1). 「Format / Restore」 will erase all data on the SD-Card, Please

make sure you have backed up any sensitive data before using
「Format / Restore」.

(2). Before using「Format / Restore」, please ensure the SD-Card

is unlocked.

(3). User Account Control in Windows Vista, 7 and 8 may prevent the

SD-Card from being formatted. In which case, please run the
program as Administrator.

a、 「Format」SD-Card

When you use an SD card for the first time, it recommended you format the SD­Card.

b、 「Restore」SD-Card

If you have a back up of your SD-Card, you may restore it’s contents using the
restore function.

c、 Language setting

You can change the change the language setting.
＊Note: Changes will take effect after rebooting software.

d、 Current Version

19

K. Estimated Recording Time

Note: The chart below of estimated recording times is for reference only. The length
of recording may vary according to recording conditions.

Capacity

Video Quality

8G 16G 32G

High

120 Min 240 Min 480 Min

20

L. Appendix: Bright and dark spot on the LCD

Q: What is a bright/dark spot?
A :  Bright spot: An abnormal bright spot, against a dark background, is called a “bright

spot”

 Dark spot: An abnormal dark spot, against a multi-colored background (excluding

dark backgrounds), is called “dark spot”

Indication of bright and dark spots

(a) No bright spot is allowed in Area A,

only a single dark spot

(b) The maximum amount of bright spots

and dark spots allowed in Area B is
two of each

(c) The maxim um total amount of bright

and dark spots in Area A and B are
three or less

Diagram of areas A and B

Notice

(1). There is a 30 day exchange window with the presence of bright and dark

spots.

(2). Please keep the receipt and contact your local dealer to exchange

merchandise.

(3). The maximum time interval is 30 days.