ROSIERES M41, RF8P, RFCMS65, RFS60, RFZ7970IN-E User Manual

0 (0)

USER INSTRUCTIONS			EN 02
OVENS
NOTICE D'EMPLOI ET D'INSTALLATION			FR 16
DES FOURS ENCASTRABLES

USINES DE ROSIÈRES - 30, rue Y. LACELLE - Rosières - 18400 - Lunery - France

Safety Indications

•WARNING: the appliance and accessible parts become hot during use. Be careful not to touch any hot parts.

•WARNING: the accessible parts can become hot when the grill is in use. Children should be kept at a safe distance.

•WARNING: ensure that the appliance is switched off before replacing the bulb, to avoid the possibility of electric shocks.

•WARNING: in order to avoid any danger caused by the accidental resetting of the thermal interruption device, the appliance should not be powered by an external switching device, such as a timer, or be connected to a circuit that is regularly switched on and off.

•WARNING: before initiating the automatic cleaning cycle:

-clean the oven door;

-remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use detergents;

-remove all accessories and the sliding rack kit (where present);

-do not place tea towels

•In ovens with meat probe it is necessary, before making the cleaning cycle, close the hole with the nut provided. Always close the hole with the nut when the meat probe is not used.

•Children under 8 should be kept at a safe distance from the appliance if not continuously supervised.

•Children should not play with the appliance. The appliance can be used by those aged 8 or over and by those with limited physical, sensorial or mental capacities, without experience or knowledge of the product, only if supervised or provided with instruction as to the operation of the appliance, in a safe way with awareness of the possible risks.

•Cleaning and maintenance should not be carried out by unsupervised children.

•Do not use rough or abrasive materials or sharp metal scrapers to clean the oven door glasses, as they can scratch the surface and cause the glass to shatter.

•The oven must be switched off before removing the removable parts

and, after cleaning, reassemble them according the instructions.

EN 02

•Only use the meat probe recommended for this oven. •Do not use a steam cleaner.

•Put the plug into a socket equipped with a third contact which corresponds to the earth and which must be connected and in operation. For models without a plug, attach a standard plug to the cable that is able to bear the load indicated on the tag. The earth conductor is yellow-green in colour. This operation should be carried out by a suitably qualified professional. In case of incompatibility between the socket and the appliance plug, ask a qualified electrician to substitute the socket with another suitable type. Connection to the power source can also be made by placing an omnipolar breaker between the appliance and the power source that can bear the maximum connected load and that is in line with current legislation. The yellow-green earth cable should not be interrupted by the breaker. The socket or omnipolar breaker used for the connection should be easily accessible when the appliance is installed.

•If the power cable is damaged, it should be substituted with a cable or special bundle available from the manufacturer or by contacting the customer service department.

If the cable is damaged, replace it promptly in accordance with the following instructions:

-open the cover of the terminal block;

-remove the power cable and substitute it with a similar cable which is compatible with the appliance (type H05VV-F, H05V2V2-F).

•This operation should be carried out by a suitably qualified professional. The earth conductor (yellow-green) must be approximately 10 mm longer than the other conductors. For any repairs, refer only to the Customer Care Department and request the use of original spare parts.

•Failure to comply with the above can compromise the safety of the appliance and invalidate the guarantee.

•Any excess of spilled material should be removed before cleaning. •During the pyrolytic cleaning process, surfaces can heat up more than usual, children should therefore be kept at a safe distance.

EN 03

Summary

General Instructions

Product Description

Use of the Oven

1.1Safety indications

1.2Electrical safety

1.3Recommendations

1.4Installation

1.5Waste management

1.6Conformity declaration

2.1Overview

2.2Accessories

2.3First use

3.1Display description

3.2Cooking modes

Oven Cleaning and Maintenance

Troubleshooting

4.1General notes on cleaning

4.2Pyrolysis

4.3Maintenance

•Removal and cleaning of grills

•Removal of the oven window

•Removal and cleaning of the glass door

•Changing the bulb

5.1 F.A.Q.

EN 04

1. General Instructions

We thank you for choosing one of our products. For the best results with your oven, you should read this manual carefully and retain it for future reference.

Before installing the oven, take note of the serial number so that you can give it to customer service staff if any repairs are required. Having removed the oven from its packaging, check that it has not been damaged during transportation. If you have doubts, do not use

the oven and refer to a qualified technician for advice. Keep all of the packaging material (plastic bags, polystyrene, nails) out of the reach of children. When the oven is switched on for the first time, strong

smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where the instructions contained in this document are not observed.

NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the model you have purchased.

1.1 Safety Indications

Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot be held responsible for any damage resulting from improper, incorrect or unreasonable usage.

The use of any electrical appliance implies the observance of some fundamental rules:

-do not pull on the power cable to disconnect the plug from the socket;

-do not touch the appliance with wet or damp hands or feet;

-in general the use of adaptors, multiple sockets and extension cables is not recommended;

-in case of malfunction and/or poor operation, switch off the appliance and do not tamper with it.

1.2 Electrical Safety

ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.

The power supply to which the oven is connected must conform with the laws in force in the country of installation. The manufacturer accepts no responsibility for any damage caused by the failure to observe these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a disconnector with multiple poles, depending on the laws in force in the country of installation. The electrical supply should be protected with suitable fuses and the cables used must have a transverse section that can ensure correct supply to the oven.

CONNECTION

The oven is supplied with a power cable that should only be connected to an electrical supply with 220240 Vac 50 Hz power between the phases or between the phase and neutral. Before the oven is connected to the electrical supply, it is important to check:

-power voltage indicated on the gauge;

-the setting of the disconnector.

The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of the power supply.

WARNING

Before connecting the oven to the power supply, ask a qualified electrician to check the continuity of the power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other problems caused by failure to connect the oven to the earth terminal or by an earth connection that has defective continuity.

EN 05

NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available so that the oven can be connected to this if it is removed from the space in which it is installed. The power cable must only be substituted by technical service staff or by technicians with equivalent qualifications.

1.3 Recommendations

After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.

Do not line the oven walls with aluminium foil or single-use protection available from stores. Aluminium foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong smokey smells, we recommend not using the oven at very high temperature. It is better to extend the cooking time and lower the temperature a little. In addition to the accessories supplied with the oven, we advise you only use dishes and baking moulds resistant to very high temperatures.

1.4 Installation

The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The installation instructions for professionally qualified personnel must be followed. Incorrect installation may cause harm or injury to people, animals or belongings. The manufacturer cannot be held responsible for such harm or injury.

The oven can be located high in a column or under a worktop. Before fixing, you must ensure good ventilation in the oven space to allow proper circulation of the fresh air required for cooling and protecting the internal parts. Make the openings specified on last page according to the type of fitting.

1.5 Waste management and environmental protection

This appliance is labelled in accordance with European Directive 2012/19/EU regarding electric and electronic appliances (WEEE). The WEEE contain both polluting substances (that can have a negative effect on the environment) and base elements (that can be reused). It is important that the WEEE undergo specific treatments to correctly remove and dispose of the pollutants and recover all the materials. Individuals can play an important role in ensuring that the WEEE do not become an environmental problem; it is essential to follow a few basic rules:

-the WEEE should not be treated as domestic waste;

-the WEEE should be taken to dedicated collection areas managed by the town council or a registered company.

In many countries, domestic collections may be available for large WEEEs. When you buy a new appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as long as the appliance is of an equivalent type and has the same functions as the purchased appliance.

SAVING AND RESPECTING THE ENVIRONMENT

Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently as possible, because heat from the cavity disperses every time it is opened. For a significant energy saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and use the residual heat that the oven continues to generate. Keep the seals clean and in order, to avoid any heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed cooking" programme makes energy saving more simple, moving the cooking process to start at the reduced tariff time slot.

1.6 Declaration of compliance

The parts of this appliance that may come into contact with foodstuffs comply with the provisions of EEC Directive 89/109.

By placing the mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product.

EN 06

ROSIERES M41, RF8P, RFCMS65, RFS60, RFZ7970IN-E User Manual

2. Product Description

2.1 Overview

	1		1. Control panel
		2.		Shelf positions
3	2		(lateral wire grid if included)
3	2	3.		Metal grill
5		4.		Drip pan
	4	5.		Fan (behind the steel plate)
	4	6.		Oven door
		6.		Oven door
6
2.2 Accessories
1 Metal grill		2 Drip pan

Holds baking trays and plates.

3 Turnspit

No pre-heating is required for rotisserie cooking. Cooking with the door closed. The energy consumption is 90-95% less than traditional system. When the oven is in use, any unused accessories should be removed from the oven.

•Unscrew the hooks •Put the spit into the meat

•Fix the meat with the hooks •Tighten the screws

•Insert the spit into the motor hole •Demount the handle before to start cooking.

Collects the residues that drip during the cooking

of foods on the grills.

4 Meat-probe (depends on the oven model)

Measures the internal temperature of food during cooking. Insert the meat-probe into the hole on the top of the cavity.

In ovens with meat probe it is necessary, before making the cleaning cycle, close the hole with the nut provided. Always close the hole with the nut when the meat probe is not used.

EN 07

5 Chef Panel

All ovens with this technology boast a function typical of professional models, the fruit of innovative technologies and the vast experience acquired by the Candy Hoover Group in this sector. The Chef Panel is an air conveyor that increases air circulation inside the oven. This allows for an increase in oven cooking performance, more standard cooking of food at all temperatures, shorter cooking times and, lastly, a uniform temperature distribution inside the oven.

2.3 First Use

PRELIMINARY CLEANING

Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering smells of newness.

3. Use of the Oven

3.1 Display description

ON / OFF	The oven is switched on and off with this button.
EXTRA

Cooking Cooking

duration end Timer

If the oven is switched off, the display shows the clock. When the oven is inactive, all the functions are available except the cooking duration and end of cooking.

If the clock is not set, the oven does not work: the display flashes, showing "12:00" and the only functioning key is Extra. From the Extra key, the following functions can be set:

Clock	Child	WiFi
set	lock

EN 08

FUNCTION

HOW TO USE

HOW TO DEACTIVATE

WHAT IT DOES

WHY IT IS NEEDED

NB: can only be set with an

•To modify cooking before

When a cooking programme

When the cooking time has

active cooking programme.

the set time, press EXTRA

terminates,

the

oven

f i n i s h e d ,

t h e

o v e n

COOKING

Press EXTRA twice and set

twice and

regulate the

switches

off

while the

automatically switches off and

the time using the “+” and

cooking time as required

display shows "END" (the

the alarm sounds for a few

DURATION

“-” keys,

confirming by

using the “<” and “>” keys,

cooking programme

icon

seconds.

pressing "SELECT".

before pressing

"SELECT"

remains on) until the On/Off

The display shows “00:00”

once more.

button, the only functioning

if no cooking duration has

•To cancel

the

cooking

key,

is pressed.

When a

been inserted,

otherwise

duration, reset the display

c o o k i n g p r o g r a m m e

the display shows the time

to “00:00”.

terminates, an

alarm will

remaining.

sound.

NB: can only be set with an

To modify the end of

W h e n

c o o k i n g

•This function is also used for

active cooking programme.

cooking before

the set

programme

terminates,

cooking that can be scheduled

Press EXTRA enough times

time, press EXTRA enough

the oven switches off while

in advance.

to illuminate the icon, set

times to illuminate the

the

display shows "END"

•If a cooking programme is set,

the end of cooking time

icon, regulate the end of

(the

cooking

programme

it will be lost if the "F" key is

using the “<” and “>” keys

cooking time as required

icon remains on) until the

pressed.

and confirm

pressing

using the “<” and “>” keys

On/Off button,

the

only

•If delayed cooking is set, the

END OF

"SELECT".

and confirm

pressing

functioning key, is pressed.

oven switches off and the

COOKING

Press EXTRA enough times

"SELECT".

W h e n

c o o k i n g

display shows the current time

to illuminate the icon, set

To cancel the end of

programme terminates, an

while the cooking programme,

the end of cooking time

cooking time, reset the

alarm will sound.

cooking duration and end of

using the “<” and “>” keys

display to “00:00”.

cooking icons are illuminated.

and confirm

pressing

•If a cooking programme is set,

"SELECT".

by pressing the “<” and “>”

The cooking

duration is

keys you can see and modify

automatically calculated.

the temperature set: at the first

t o u c h , t h e o p e r a t i n g

temperature is

shown while

another touch will allow you to

modify said temperature.

• T h e d i s p l ay

s h ows

•To modify the timer, press

•This function activates an

• The

timer

functions

“00:00” if no time has been

EXTRA enough

times to

alarm that sounds for a few

regardless of whether the

inserted

the

time

illuminate

the icon,

seconds when the set time

oven is switched on.

TIMER

remaining

this

has

regulate the cooking time

expires (this function does

already been set.

as required using the “<”

not switch the oven off).

Press EXTRA enough times

and “>” keys and confirm

You

can

select a

time

to illuminate the icon and

by pressing "SELECT".

between 00:00 and 23:59.

use the “<” and “>” keys to

set the time, confirming by

pressing SELECT.

•Switched on for the first

•It allows you to set the

• T h e

a l a r m

f u n c t i o n s

t i m e ,

t h e

d i s p l a y

time that appears on the

regardless of

whether the

SETTING

illuminates

and shows

display.

oven is switched on.

"12:00".

THE CLOCK

•To modify the time, press

EXTRA

enough

times to

illuminate the icon and use

the “<” and “>” keys to set

the time, confirming it by

pressing SELECT.

•Press

the

EXTRA

key

•Press the

EXTRA key

•If the function is active

•This

function is

useful

CHILD

enough times to illuminate

only the "Extra" button, to

when there are children in

SAFETY

the icon and then either

deactivate

the

function,

the house.

the “<” or “>” key to

and "On/Off" button can

activate this function: the

deactivate this

function:

be used.

display will show ON; to

the display will show OFF;

confirm press SELECT.

to confirm press SELECT.

EN 09

WiFi (depends on the oven model) Pressing "Extra" on the timer display allows you to select the WiFi menu. In the Wi-Fi menu if you press the "< >" buttons you can select:

-Off: Wi-Fi is off; the oven is not controllable via the app.

-On: Wi-fi is on and the oven is only controllable via the app. It means that it is not possible to select cooking functions, recipes and temperature from the display. Only the Wi-Fi menu is available by pressing "Extra". You can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it can only be switched on via the app.

-Reset: This setting should be used to enrol the oven the first time it connects to your Wi-Fi network and to reset the current Wi-Fi connection to allow a new enrolment. Once selected, the appliance gives you 5 minutes to complete the enrolment process. During this process the cooking functions, recipes and temperature setting are not accessible from the display. Only the Wi-Fi menu is available by pressing "Extra". You can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it can only be switched on via the app. To exit the enrolment/reset procedure via the display, press "Extra" and then use "< >" buttons to select "Off". After five minutes, the appliance will exit the enrolment/reset procedure automatically.

-Read: the oven sends its status to the app but it cannot be controlled remotely. The oven must be enrolled before this is possible.

If Wi-Fi is not configured it is only possible to choose between off and reset.

When the oven is connected to Wi-Fi, the default cooking time duration is 5 hours, but this can be modified by the user.

Wi-Fi Enrolment:

To enroll the appliance for Wi-Fi, press "Extra" on the display until the Wi-Fi icon lights, then select "Reset" by pressing "< >". The procedure on the app should then be followed. Once selected, the appliance gives you 5 minutes to complete the enrolment process.

Wi-Fi icon

-icon not lit: Wi-Fi is off.

-Icon blinks 1 second on an 1 second off: the oven is accessible to your Wi-Fi network and ready to be enrolled. If the enrolment has not been successful, the Wi-Fi icon will switch off after 5 minutes.

-Icon is permanently lit: the oven is connected to your Wi-Fi router.

-The icon blinks 3 seconds on and 1 second off: the oven is trying to connect to your Wi-Fi router.

-The icon blinks 1 second on and 3 seconds off: the oven is in read only mode.

ROSIERES E-PICURIEN:

For detailed information on HOW TO CONNECT your E-picurien appliance

and HOW TO USE IT effectively, go to www.rosieresepicurien.com.

Grill

Oven box

Pyro

Turnspit

Defost

Circular

heating element Fan Bottom heating element

LANGUAGE SETTING The language can be set when the oven is switched off by pressing the Extra and Select buttons simultaneously and for 3". The current language is shown on the display and can be changed by pressing the “<” or “>” keys, confirming it by pressing SELECT. Available languages are: Italian, English, French and German.

SELECT Any selection must be confirmed. If not confirmed within 15 seconds, the selection is cancelled. By changing menu, any unconfirmed selection is lost.

“HOT” ICON When a cooking programme finishes or when the oven switches off, if the oven is still hot, the display shows the current time alternating with the message “HOT” at 3" intervals.

EN 10

+ 23 hidden pages